- 23 Sep, 2020 40 commits
-
-
Bart Van Assche authored
[ Upstream commit 839f5ac0 ] Neither rxe->ifc_ops nor any of the function pointers in struct struct rxe_ifc_ops ever change. Hence remove the rxe->ifc_ops indirection mechanism. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Andrew Boyer <andrew.boyer@dell.com> Cc: Moni Shoua <monis@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mathias Nyman authored
commit cfd54fa8 upstream. Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable. The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration(). A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync. To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part. Cc: stable <stable@vger.kernel.org> Tested-by:
Martin Thierer <mthierer@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aleksander Morgado authored
commit 1ac69879 upstream. These modules have 2 different USB layouts: The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9205 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: AT-capable port (data). In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9206 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: QFLOG interface. * ttyUSB4: DAM interface. * ttyUSB5: AT-capable port (data). Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Patrick Riphagen authored
commit 6ccc48e0 upstream. The device added has an FTDI chip inside. The device is used to connect Xsens USB Motion Trackers. Cc: stable@vger.kernel.org Signed-off-by:
Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by:
-
Zeng Tao authored
commit a18cd6c9 upstream. The USB device descriptor may get changed between two consecutive enumerations on the same device for some reason, such as DFU or malicius device. In that case, we may access the changing descriptor if we don't take the device lock here. The issue is reported: https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9 Cc: stable <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com Fixes: 217a9081 ("USB: add all configs to the "descriptors" attribute") Signed-off-by:
Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.comSigned-off-by:
-
Vaibhav Agarwal authored
commit 1dffeb8b upstream. The current implementation for gbcodec_mixer_dapm_ctl_put() uses uninitialized gbvalue for comparison with updated value. This was found using static analysis with coverity. Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { This patch fixes the issue with fetching the gbvalue before using it for comparision. Fixes: 6339d232 ("greybus: audio: Add topology parser for GB codec") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Vaibhav Agarwal <vaibhav.sr@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/bc4f29eb502ccf93cd2ffd98db0e319fa7d0f247.1597408126.git.vaibhav.sr@gmail.comSigned-off-by:
-
Tetsuo Handa authored
commit bd018a6a upstream. syzbot is reporting OOB read at vga_8planes_imageblit() [1], for "cdat[y] >> 4" can become a negative value due to "const char *cdat". [1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132Reported-by:
syzbot <syzbot+69fbd3e01470f169c8c4@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/90b55ec3-d5b0-3307-9f7c-7ff5c5fd6ad3@i-love.sakura.ne.jpSigned-off-by:
-
Wanpeng Li authored
commit 99b82a14 upstream. According to SDM 27.2.4, Event delivery causes an APIC-access VM exit. Don't report internal error and freeze guest when event delivery causes an APIC-access exit, it is handleable and the event will be re-injected during the next vmentry. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit 973c096f upstream. Yunhai Zhang recently fixed a VGA software scrollback bug in commit ebfdfeea ("vgacon: Fix for missing check in scrollback handling"), but that then made people look more closely at some of this code, and there were more problems on the vgacon side, but also the fbcon software scrollback. We don't really have anybody who maintains this code - probably because nobody actually _uses_ it any more. Sure, people still use both VGA and the framebuffer consoles, but they are no longer the main user interfaces to the kernel, and haven't been for decades, so these kinds of extra features end up bitrotting and not really being used. So rather than try to maintain a likely unused set of code, I'll just aggressively remove it, and see if anybody even notices. Maybe there are people who haven't jumped on the whole GUI badnwagon yet, and think it's just a fad. And maybe those people use the scrollback code. If that turns out to be the case, we can resurrect this again, once we've found the sucker^Wmaintainer for it who actually uses it. Reported-by:
NopNop Nop <nopitydays@gmail.com> Tested-by:
Willy Tarreau <w@1wt.eu> Cc: 张云海 <zhangyunhai@nsfocus.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 06a0df4d upstream. Since the softscroll code got removed, this argument is always zero and makes no sense any more. Tested-by:
Yuan Ming <yuanmingbuaa@gmail.com> Tested-by:
-
Linus Torvalds authored
commit 50145474 upstream. This (and the VGA soft scrollback) turns out to have various nasty small special cases that nobody really is willing to fight. The soft scrollback code was really useful a few decades ago when you typically used the console interactively as the main way to interact with the machine, but that just isn't the case any more. So it's not worth dragging along. Tested-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Ilya Dryomov authored
commit f44d04e6 upstream. It turns out that currently we rely only on sysfs attribute permissions: $ ll /sys/bus/rbd/{add*,remove*} --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add_single_major --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/remove --w------- 1 root root 4096 Sep 3 20:38 /sys/bus/rbd/remove_single_major This means that images can be mapped and unmapped (i.e. block devices can be created and deleted) by a UID 0 process even after it drops all privileges or by any process with CAP_DAC_OVERRIDE in its user namespace as long as UID 0 is mapped into that user namespace. Be consistent with other virtual block devices (loop, nbd, dm, md, etc) and require CAP_SYS_ADMIN in the initial user namespace for mapping and unmapping, and also for dumping the configuration string and refreshing the image header. Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Hou Pu authored
commit ed43ffea upstream. The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Hou Pu <houpu@bytedance.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Varun Prakash authored
commit 5528d031 upstream. Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: <stable@vger.kernel.org> Reviewed-by:
Mike Christie <michael.christie@oralce.com> Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Michał Mirosław authored
commit 5c065401 upstream. Pull regulator_list_mutex into set_consumer_device_supply() and keep allocations outside of it. Fourth of the fs_reclaim deadlock case. Fixes: 45389c47 ("regulator: core: Add early supply resolution for regulators") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/f0380bdb3d60aeefa9693c4e234d2dcda7e56747.1597195321.git.mirq-linux@rere.qmqm.plSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Filipe Manana authored
commit 1c78544e upstream. When faulting in the pages for the user supplied buffer for the search ioctl, we are passing only the base address of the buffer to the function fault_in_pages_writeable(). This means that after the first iteration of the while loop that searches for leaves, when we have a non-zero offset, stored in 'sk_offset', we try to fault in a wrong page range. So fix this by adding the offset in 'sk_offset' to the base address of the user supplied buffer when calling fault_in_pages_writeable(). Several users have reported that the applications compsize and bees have started to operate incorrectly since commit a48b73ec ("btrfs: fix potential deadlock in the search ioctl") was added to stable trees, and these applications make heavy use of the search ioctls. This fixes their issues. Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/ Link: https://github.com/kilobyte/compsize/issues/34 Fixes: a48b73ec ("btrfs: fix potential deadlock in the search ioctl") CC: stable@vger.kernel.org # 4.4+ Tested-by:
A L <mail@lechevalier.se> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Rustam Kovhaev authored
commit fea22e15 upstream. let's use usb_find_common_endpoints() to discover endpoints, it does all necessary checks for type and xfer direction remove memset() in hfa384x_create(), because we now assign endpoints in prism2sta_probe_usb() and because create_wlan() uses kzalloc() to allocate hfa384x struct before calling hfa384x_create() Fixes: faaff976 ("staging: wlan-ng: properly check endpoint types") Reported-and-tested-by: syzbot+22794221ab96b0bab53a@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=22794221ab96b0bab53aSigned-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200804145614.104320-1-rkovhaev@gmail.comSigned-off-by:
-
Johan Hovold authored
commit 66a35939 upstream. Many USB drivers iterate over the available endpoints to find required endpoints of a specific type and direction. Typically the endpoints are required for proper function and a missing endpoint should abort probe. To facilitate code reuse, add a helper to retrieve common endpoints (bulk or interrupt, in or out) and four wrappers to find a single endpoint. Note that the helpers are marked as __must_check to serve as a reminder to always verify that all expected endpoints are indeed present. This also means that any optional endpoints, typically need to be looked up through separate calls. Signed-off-by:
-
Jonathan Cameron authored
commit 89226a29 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The additional forcing of the 8 byte alignment of the timestamp is not strictly necessary but makes the code less fragile by making this explicit. Fixes: c7eeea93 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver") Reported-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit 7e5ac1f2 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The force alignment of ts is not strictly necessary in this particularly case but does make the code less fragile. Fixes: a84ef0d1 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver") Reported-by:
-
Jonathan Cameron authored
commit 95ad6757 upstream. iio_push_to_buffers_with_timestamp assumes 8 byte alignment which is not guaranteed by an array of smaller elements. Note that whilst in this particular case the alignment forcing of the ts element is not strictly necessary it acts as good documentation. Doing this where not necessary should cut down on the number of cut and paste introduced errors elsewhere. Fixes: 0427a106 ("iio: accel: kxsd9: Add triggered buffer handling") Reported-by:
-
Jonathan Cameron authored
commit 52362885 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak appart from previous readings. It is necessary to force the alignment of ts to avoid the padding on x86_32 being different from 64 bit platorms (it alows for 4 bytes aligned 8 byte types. Fixes: 06ad7ea1 ("max44000: Initial triggered buffer support") Reported-by:
-
Jonathan Cameron authored
commit 02ad21ce upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment of ts is not necessary in this case as by coincidence the padding will end up the same, however I consider it to make the code less fragile and have included it. Fixes: bc11ca4a ("iio:magnetometer:ak8975: triggered buffer support") Reported-by:
-
Sandhya Bankar authored
commit 69c72ec9 upstream. Fix the following sparse endianness warnings: drivers/iio/magnetometer/ak8975.c:716:16: warning: cast to restricted __le16 drivers/iio/magnetometer/ak8975.c:837:19: warning: cast to restricted __le16 drivers/iio/magnetometer/ak8975.c:838:19: warning: cast to restricted __le16 drivers/iio/magnetometer/ak8975.c:839:19: warning: cast to restricted __le16 Signed-off-by:
Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jonathan Cameron authored
commit 54f82df2 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak apart from previous readings. The eplicit alignment of ts is necessary to ensure correct padding on x86_32 where s64 is only aligned to 4 bytes. Fixes: 08e05d1f ("ti-adc081c: Initial triggered buffer support") Reported-by:
-
Jonathan Cameron authored
commit f8cd222f upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 32 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment isn't technically needed here, but it reduced fragility and avoids cut and paste into drivers where it will be needed. If we want this in older stables will need manual backport due to driver reworks. Fixes: c43a102e ("iio: ina2xx: add support for TI INA2xx Power Monitors") Reported-by:
-
Jonathan Cameron authored
commit a6f86f72 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes tag is beyond some major refactoring so likely manual backporting would be needed to get that far back. Whilst the force alignment of the ts is not strictly necessary, it does make the code less fragile. Fixes: 3bbec977 ("iio: bmc150_accel: add support for hardware fifo") Reported-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:
-
Jonathan Cameron authored
commit 2684d500 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here we use a structure on the stack. The driver already did an explicit memset so no data leak was possible. Forced alignment of ts is not strictly necessary but probably makes the code slightly less fragile. Note there has been some rework in this driver of the years, so no way this will apply cleanly all the way back. Fixes: 2690be90 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver") Reported-by:
-
Maxim Kochetkov authored
commit e71e6dbe upstream. To stop conversion ads1015_set_power_state() function call unimplemented function __pm_runtime_suspend() from pm_runtime_put_autosuspend() if CONFIG_PM is not set. In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS, so ads1015_read_raw() failed because ads1015_set_power_state() returns an error. If CONFIG_PM is disabled, there is no need to start/stop conversion. Fix it by adding return 0 function variant if CONFIG_PM is not set. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Fixes: ecc24e72 ("iio: adc: Add TI ADS1015 ADC driver support") Tested-by:
Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Angelo Compagnucci authored
[ Upstream commit a139ffa4 ] Reading from the chip should be unlocked on error path else the lock could never being released. Fixes: 07914c84 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Fixes: 3f1093d8 ("iio: adc: mcp3422: fix locking scope") Acked-by:
Angelo Compagnucci <angelo.compagnucci@gmail.com> Link: https://lore.kernel.org/r/20200901093218.1500845-1-angelo.compagnucci@gmail.comSigned-off-by:
-
Angelo Compagnucci authored
commit 3f1093d8 upstream. Locking should be held for the entire reading sequence involving setting the channel, waiting for the channel switch and reading from the channel. If not, reading from a channel can result mixing with the reading from another channel. Fixes: 07914c84 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit cfc905f1 ] GCOV built with GCC 10 doesn't initialize n_function variable. This produces different kernel panics as was seen by Colin in Ubuntu and me in FC 32. As a workaround, let's disable GCOV build for broken GCC 10 version. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288 Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/ Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Rander Wang authored
[ Upstream commit 13774d81 ] In snd_hdac_device_init pm_runtime_set_active is called to increase child_count in parent device. But when it is failed to build connection with GPU for one case that integrated graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be invoked to clean up a HD-audio extended codec base device. At this time the child_count of parent is not decreased, which makes parent device can't get suspended. This patch calls pm_runtime_set_suspended to decrease child_count in parent device in snd_hdac_device_exit to match with snd_hdac_device_init. pm_runtime_set_suspended can make sure that it will not decrease child_count if the device is already suspended. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Xie He authored
[ Upstream commit 1a545ebe ] This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function. This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header). Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 89d29997 ] eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors. The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header. - copy AUX_IENABLE from arch/arc header - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/** Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.deSigned-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 125eac24 ] Don't leak kernel memory contents into the shortform attr fork. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Xie He authored
[ Upstream commit 91244d10 ] Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
-
Mohan Kumar authored
[ Upstream commit 216116ea ] The Tegra HDA codec HW implementation has an issue related to not swapping the 2 channel Audio Sample Packet(ASP) channel mapping. Whatever the FL and FR mapping specified the left channel always comes out of left speaker and right channel on right speaker. So add condition to disallow the swapping of FL,FR during the playback. Signed-off-by:
Mohan Kumar <mkumard@nvidia.com> Acked-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.comSigned-off-by:
-
Dinghao Liu authored
[ Upstream commit 15ac5cda ] When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit f97c04c3 ] When down_killable() fails, skb_resp should be freed just like when st95hf_spi_send() fails. Signed-off-by:
-
