- 06 May, 2020 4 commits
-
-
Vasily Averin authored
commit 933db733 upstream. qxl_release should not be accesses after qxl_push_*_ring_release() calls: userspace driver can process submitted command quickly, move qxl_release into release_ring, generate interrupt and trigger garbage collector. It can lead to crashes in qxl driver or trigger memory corruption in some kmalloc-192 slab object Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() + qxl_push_{cursor,command}_ring_release() calls to close that race window. cc: stable@vger.kernel.org Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> [backported to v.4.19 stable] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vasily Averin authored
commit a65aa9c3 upstream. Cc: stable@vger.kernel.org Fixes: 8002db63 ("qxl: convert qxl driver to proper use for reservations") Signed-off-by:
-
Vasily Averin authored
commit 85e9b88a upstream. ret should be changed to release allocated struct qxl_release Cc: stable@vger.kernel.org Fixes: 8002db63 ("qxl: convert qxl driver to proper use for reservations") Signed-off-by:
-
Ville Syrjälä authored
commit 6292b8ef upstream. The DispID DTD pixel clock is documented as: "00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec" Which seems to imply that we to add one to the raw value. Reality seems to agree as there are tiled displays in the wild which currently show a 10kHz difference in the pixel clock between the tiles (one tile gets its mode from the base EDID, the other from the DispID block). Cc: stable@vger.kernel.org References: https://gitlab.freedesktop.org/drm/intel/-/issues/27Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.syrjala@linux.intel.comReviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
- 02 May, 2020 36 commits
-
-
Greg Kroah-Hartman authored
-
Al Viro authored
commit b0d3869c upstream. ... to protect the modification of mp->m_count done by it. Most of the places that modify that thing also have namespace_lock held, but not all of them can do so, so we really need mount_lock here. Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related bug in pivot_root(2) (fixed unnoticed in 5.3); search for other similar turds has caught out this one. Cc: stable@kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Piotr Krysiuk <piotras@gmail.com> Signed-off-by:
-
Ritesh Harjani authored
commit f1eec3b0 upstream. While calculating overhead for internal journal, also check that j_inum shouldn't be 0. Otherwise we get below error with xfstests generic/050 with external journal (XXX_LOGDEV config) enabled. It could be simply reproduced with loop device with an external journal and marking blockdev as RO before mounting. [ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 CPU: 107 PID: 115347 Comm: mount Tainted: G L --------- -t - 4.18.0-167.el8.ppc64le #1 NIP: c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4 <...> NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0 LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0 <...> Call Trace: generic_make_request_checks+0x6b0/0x7d0 (unreliable) generic_make_request+0x3c/0x420 submit_bio+0xd8/0x200 submit_bh_wbc+0x1e8/0x250 __sync_dirty_buffer+0xd0/0x210 ext4_commit_super+0x310/0x420 [ext4] __ext4_error+0xa4/0x1e0 [ext4] __ext4_iget+0x388/0xe10 [ext4] ext4_get_journal_inode+0x40/0x150 [ext4] ext4_calculate_overhead+0x5a8/0x610 [ext4] ext4_fill_super+0x3188/0x3260 [ext4] mount_bdev+0x778/0x8f0 ext4_mount+0x28/0x50 [ext4] mount_fs+0x74/0x230 vfs_kern_mount.part.6+0x6c/0x250 do_mount+0x2fc/0x1280 sys_mount+0x158/0x180 system_call+0x5c/0x70 EXT4-fs (pmem1p2): no journal found EXT4-fs (pmem1p2): can't get journal size EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery Fixes: 3c816ded ("ext4: use journal inode to determine journal overhead") Reported-by:
Harish Sriram <harish@linux.ibm.com> Signed-off-by:
Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Yuval Basson authored
commit 8063f761 upstream. The qed_chain data structure was modified in commit 1a4a6975 ("qed: Chain support for external PBL") to support receiving an external pbl (due to iWARP FW requirements). The pages pointed to by the pbl are allocated in qed_chain_alloc and their virtual address are stored in an virtual addresses array to enable accessing and freeing the data. The physical addresses however weren't stored and were accessed directly from the external-pbl during free. Destroy-qp flow, leads to freeing the external pbl before the chain is freed, when the chain is freed it tries accessing the already freed external pbl, leading to a use-after-free. Therefore we need to store the physical addresses in additional to the virtual addresses in a new data structure. Fixes: 1a4a6975 ("qed: Chain support for external PBL") Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Yuval Bason <ybason@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luke Nelson authored
commit 50fe7ebb upstream. The current JIT clobbers the destination register for BPF_JSET BPF_X and BPF_K by using "and" and "or" instructions. This is fine when the destination register is a temporary loaded from a register stored on the stack but not otherwise. This patch fixes the problem (for both BPF_K and BPF_X) by always loading the destination register into temporaries since BPF_JSET should not modify the destination register. This bug may not be currently triggerable as BPF_REG_AX is the only register not stored on the stack and the verifier uses it in a limited way. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Wang YanQing <udknight@gmail.com> Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.comSigned-off-by:
-
Sascha Hauer authored
[ Upstream commit c843b382 ] The jc42 driver passes I2C client's name as hwmon device name. In case of device tree probed devices this ends up being part of the compatible string, "jc-42.4-temp". This name contains hyphens and the hwmon core doesn't like this: jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix This changes the name to "jc42" which doesn't have any illegal characters. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.deSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Theodore Ts'o authored
[ Upstream commit 907ea529 ] If the in-core buddy bitmap gets corrupted (or out of sync with the block bitmap), issue a WARN_ON and try to recover. In most cases this involves skipping trying to allocate out of a particular block group. We can end up declaring the file system corrupted, which is fair, since the file system probably should be checked before we proceed any further. Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu Google-Bug-Id: 34811296 Google-Bug-Id: 34639169 Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit a17a9d93 ] Current wait times have proven to be too short to protect against inode reuses that lead to metadata inconsistencies. Now that we will retry the inode allocation if we can't find any recently deleted inodes, it's a lot safer to increase the recently deleted time from 5 seconds to a minute. Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu Google-Bug-Id: 36602237 Signed-off-by:
-
yangerkun authored
[ Upstream commit c2a559bc ] Run generic/388 with journal data mode sometimes may trigger the warning in ext4_invalidatepage. Actually, we should use the matching invalidatepage in ext4_writepage. Signed-off-by:
yangerkun <yangerkun@huawei.com> Signed-off-by:
-
Fangrui Song authored
[ Upstream commit c9a4ef66 ] In assembly, many instances of __emit_inst(x) expand to a directive. In a few places __emit_inst(x) is used as an assembler macro argument. For example, in arch/arm64/kvm/hyp/entry.S ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) expands to the following by the C preprocessor: alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 Both comma and space are separators, with an exception that content inside a pair of parentheses/quotes is not split, so the clang integrated assembler splits the arguments to: nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend (along with many other non-x86 backends) sees: alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # .inst(...) is parsed as one argument while its x86 backend sees: alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # The extra space before '(' makes the whole .inst (...) parsed as two arguments The non-x86 backend's behavior is considered unintentional (https://sourceware.org/bugzilla/show_bug.cgi?id=25750). So drop the space separator inside `.inst (...)` to make the clang integrated assembler work. Suggested-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/939Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Hui Wang authored
[ Upstream commit 9a641848 ] Before the pci_driver->probe() is called, the pci subsystem calls runtime_forbid() and runtime_get_sync() on this pci dev, so only call runtime_put_autosuspend() is not enough to enable the runtime_pm on this device. For controllers with vgaswitcheroo feature, the pci/quirks.c will call runtime_allow() for this dev, then the controllers could enter rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like Intel hda controllers, the runtime_pm is not enabled because the runtime_allow() is not called. Since it is no harm calling runtime_allow() twice, here let hda driver call runtime_allow() for all controllers. Then the runtime_pm is enabled on all controllers after the put_autosuspend() is called. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 6b51fd3f ] xenbus_map_ring_valloc() maps a ring page and returns the status of the used grant (0 meaning success). There are Xen hypervisors which might return the value 1 for the status of a failed grant mapping due to a bug. Some callers of xenbus_map_ring_valloc() test for errors by testing the returned status to be less than zero, resulting in no error detected and crashing later due to a not available ring page. Set the return value of xenbus_map_ring_valloc() to GNTST_general_error in case the grant status reported by Xen is greater than zero. This is part of XSA-316. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 8782e7ca ] Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit bd841d61 ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Bodo Stroesser authored
[ Upstream commit 066f79a5 ] In case command ring buffer becomes inconsistent, tcmu sets device flag TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes completions from the ring. The reset_ring attribute can be used to completely clean up the command ring, so after reset_ring the ring no longer is inconsistent. Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow normal processing. Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.comAcked-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bodo Stroesser authored
[ Upstream commit 8fed04eb ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.comSigned-off-by:
-
Roy Spliet authored
[ Upstream commit 3ba21113 ] This fixes runtime PM not working after a suspend-to-RAM cycle at least for the codec-less HDA device found on NVIDIA GPUs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043Signed-off-by:
Roy Spliet <nouveau@spliet.org> Link: https://lore.kernel.org/r/20200413082034.25166-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
[ Upstream commit 9479e75f ] Currently, when the HD-audio controller driver doesn't detect any codecs, it tries to abort the probe. But this abort happens at the delayed probe, i.e. the primary probe call already returned success, hence the driver is never unbound until user does so explicitly. As a result, it may leave the HD-audio device in the running state without the runtime PM. More badly, if the device is a HD-audio bus that is tied with a GPU, GPU cannot reach to the full power down and consumes unnecessarily much power. This patch changes the logic after no-codec situation; it continues probing without the further codec initialization but keep the controller driver running normally. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043Tested-by:
-
Darrick J. Wong authored
[ Upstream commit c142932c ] In the reflink extent remap function, it turns out that uirec (the block mapping corresponding only to the part of the passed-in mapping that got unmapped) was not fully initialized. Specifically, br_state was not being copied from the passed-in struct to the uirec. This could lead to unpredictable results such as the reflinked mapping being marked unwritten in the destination file. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Olaf Hering authored
[ Upstream commit 97d9f1c4 ] A few kernel features depend on ms_hyperv.misc_features, but unlike its siblings ->features and ->hints, the value was never reported during boot. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.deSigned-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Martin Fuzzey authored
[ Upstream commit da722186 ] On some SoCs, such as the i.MX6, it is necessary to set a bit in the SoC level GPR register before suspending for wake on lan to work. The fec platform callback sleep_mode_enable was intended to allow this but the platform implementation was NAK'd back in 2015 [1] This means that, currently, wake on lan is broken on mainline for the i.MX6 at least. So implement the required bit setting in the fec driver by itself by adding a new optional DT property indicating the GPR register and adding the offset and bit information to the driver. [1] https://www.spinics.net/lists/netdev/msg310922.htmlSigned-off-by:
Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Luke Nelson authored
[ Upstream commit aee194b1 ] This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Signed-off-by:
-
Eric Biggers authored
commit 10a98cb1 upstream. Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set during do_exit(). That can confuse things. In particular, if BSD process accounting is enabled, then do_exit() writes data to an accounting file. If that file has FS_SYNC_FL set, then this write occurs synchronously and can misbehave if PF_MEMALLOC is set. For example, if the accounting file is located on an XFS filesystem, then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data doesn't get written when it should. Or if the accounting file is located on an ext4 filesystem without a journal, then a WARN_ON_ONCE() in ext4_write_inode() is triggered and the inode doesn't get written. Fix this in xfsaild() by using the helper functions to save and restore PF_MEMALLOC. This can be reproduced as follows in the kvm-xfstests test appliance modified to add the 'acct' Debian package, and with kvm-xfstests's recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y: mkfs.xfs -f /dev/vdb mount /vdb touch /vdb/file chattr +S /vdb/file accton /vdb/file mkfs.xfs -f /dev/vdc mount /vdc umount /vdc It causes: WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534 CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534 [...] Call Trace: write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578 do_writepages+0x41/0xe0 mm/page-writeback.c:2344 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114 generic_write_sync include/linux/fs.h:2867 [inline] xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write+0x130/0x1d0 fs/read_write.c:483 __kernel_write+0x54/0xe0 fs/read_write.c:515 do_acct_process+0x122/0x170 kernel/acct.c:522 slow_acct_process kernel/acct.c:581 [inline] acct_process+0x1d4/0x27c kernel/acct.c:607 do_exit+0x83d/0xbc0 kernel/exit.c:791 kthread+0xf1/0x140 kernel/kthread.c:257 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352 This bug was originally reported by syzbot at https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com. Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Yang Shi authored
commit 94b7cc01 upstream. Syzbot reported the below lockdep splat: WARNING: possible irq lock inversion dependency detected 5.6.0-rc7-syzkaller #0 Not tainted -------------------------------------------------------- syz-executor.0/10317 just changed the state of lock: ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline] ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: shmem_mfill_atomic_pte+0x1012/0x21c0 mm/shmem.c:2407 but this lock was taken by another, SOFTIRQ-safe lock in the past: (&(&xa->xa_lock)->rlock#5){..-.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&info->lock)->rlock); local_irq_disable(); lock(&(&xa->xa_lock)->rlock#5); lock(&(&info->lock)->rlock); <Interrupt> lock(&(&xa->xa_lock)->rlock#5); *** DEADLOCK *** The full report is quite lengthy, please see: https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2004152007370.13597@eggly.anvils/T/#m813b412c5f78e25ca8c6c7734886ed4de43f241d It is because CPU 0 held info->lock with IRQ enabled in userfaultfd_copy path, then CPU 1 is splitting a THP which held xa_lock and info->lock in IRQ disabled context at the same time. If softirq comes in to acquire xa_lock, the deadlock would be triggered. The fix is to acquire/release info->lock with *_irq version instead of plain spin_{lock,unlock} to make it softirq safe. Fixes: 4c27fe4c ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Acked-by:
Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/1587061357-122619-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Luke Nelson authored
commit 5fa9a98f upstream. The current JIT uses the following sequence to zero-extend into the upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W}, when the destination register is not on the stack: EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0); The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte immediate; the current code emits only 1 byte of the immediate. This means that the first 3 bytes of the next instruction will be treated as the rest of the immediate, breaking the stream of instructions. This patch fixes the problem by instead emitting "xor dst_hi,dst_hi" to clear the upper 32 bits. This fixes the problem and is more efficient than using MOV to load a zero immediate. This bug may not be currently triggerable as BPF_REG_AX is the only register not stored on the stack and the verifier uses it in a limited way, and the verifier implements a zero-extension optimization. But the JIT should avoid emitting incorrect encodings regardless. Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32") Signed-off-by:
H. Peter Anvin (Intel) <hpa@zytor.com> Acked-by:
-
Ian Rogers authored
commit f3bed55e upstream. Current logic yields the child task as the parent. Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK\|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/ After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265) Fixes: 94d5d1b2 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by:
KP Singh <kpsingh@google.com> Signed-off-by:
Ian Rogers <irogers@google.com> Signed-off-by:
-
Niklas Schnelle authored
commit a019b361 upstream. On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc() allocation as done for the firmware tracer will always fail. Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself that copies the debug data into the trace array and there is no need for the allocation to be contiguous in physical memory. We can therefor use kvzalloc() instead of kzalloc() and get rid of the large contiguous allcoation. Fixes: f53aaa31 ("net/mlx5: FW tracer, implement tracer logic") Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
commit bc23d0e3 upstream. When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This happens because in this configuration, NR_CPUS can be larger than nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient to guard against hitting the warning in cpumask_check(). Fix this by explicitly checking the supplied key against the nr_cpumask_bits variable before calling cpu_possible(). Fixes: 6710e112 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200416083120.453718-1-toke@redhat.comSigned-off-by:
-
Nicolas Saenz Julienne authored
commit 90444b95 upstream. Since its inception the module was meant to be disabled by default, but the original commit failed to add the relevant property. Fixes: 4aba4cf8 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks") Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 0a8f4102 upstream. Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d ("staging: gasket: apex: fixup undefined PCI class") Reported-by:
Luís Mendes <luis.p.mendes@gmail.com> Debugged-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 2880325b upstream. The ASMedia USB XHCI Controller claims to support generating PME# while in D0: 01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI]) Subsystem: SUNIX Co., Ltd. Device 312b Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- However PME# only gets asserted when plugging USB 2.0 or USB 1.1 devices, but not for USB 3.0 devices. Remove PCI_PM_CAP_PME_D0 to avoid using PME under D0. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205919 Link: https://lore.kernel.org/r/20191219192006.16270-1-kai.heng.feng@canonical.comSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Chuck Lever authored
commit 23cf1ee1 upstream. Utilize the xpo_release_rqst transport method to ensure that each rqstp's svc_rdma_recv_ctxt object is released even when the server cannot return a Reply for that rqstp. Without this fix, each RPC whose Reply cannot be sent leaks one svc_rdma_recv_ctxt. This is a 2.5KB structure, a 4KB DMA-mapped Receive buffer, and any pages that might be part of the Reply message. The leak is infrequent unless the network fabric is unreliable or Kerberos is in use, as GSS sequence window overruns, which result in connection loss, are more common on fast transports. Fixes: 3a88092e ("svcrdma: Preserve Receive buffer until svc_rdma_sendto") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
commit e28b4fc6 upstream. I hit this while testing nfsd-5.7 with kernel memory debugging enabled on my server: Mar 30 13:21:45 klimt kernel: BUG: unable to handle page fault for address: ffff8887e6c279a8 Mar 30 13:21:45 klimt kernel: #PF: supervisor read access in kernel mode Mar 30 13:21:45 klimt kernel: #PF: error_code(0x0000) - not-present page Mar 30 13:21:45 klimt kernel: PGD 3601067 P4D 3601067 PUD 87c519067 PMD 87c3e2067 PTE 800ffff8193d8060 Mar 30 13:21:45 klimt kernel: Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI Mar 30 13:21:45 klimt kernel: CPU: 2 PID: 1933 Comm: nfsd Not tainted 5.6.0-rc6-00040-g881e87a3c6f9 #1591 Mar 30 13:21:45 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 Mar 30 13:21:45 klimt kernel: RIP: 0010:svc_rdma_post_chunk_ctxt+0xab/0x284 [rpcrdma] Mar 30 13:21:45 klimt kernel: Code: c1 83 34 02 00 00 29 d0 85 c0 7e 72 48 8b bb a0 02 00 00 48 8d 54 24 08 4c 89 e6 48 8b 07 48 8b 40 20 e8 5a 5c 2b e1 41 89 c6 <8b> 45 20 89 44 24 04 8b 05 02 e9 01 00 85 c0 7e 33 e9 5e 01 00 00 Mar 30 13:21:45 klimt kernel: RSP: 0018:ffffc90000dfbdd8 EFLAGS: 00010286 Mar 30 13:21:45 klimt kernel: RAX: 0000000000000000 RBX: ffff8887db8db400 RCX: 0000000000000030 Mar 30 13:21:45 klimt kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000246 Mar 30 13:21:45 klimt kernel: RBP: ffff8887e6c27988 R08: 0000000000000000 R09: 0000000000000004 Mar 30 13:21:45 klimt kernel: R10: ffffc90000dfbdd8 R11: 00c068ef00000000 R12: ffff8887eb4e4a80 Mar 30 13:21:45 klimt kernel: R13: ffff8887db8db634 R14: 0000000000000000 R15: ffff8887fc931000 Mar 30 13:21:45 klimt kernel: FS: 0000000000000000(0000) GS:ffff88885bd00000(0000) knlGS:0000000000000000 Mar 30 13:21:45 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 CR3: 000000081b72e002 CR4: 00000000001606e0 Mar 30 13:21:45 klimt kernel: Call Trace: Mar 30 13:21:45 klimt kernel: ? svc_rdma_vec_to_sg+0x7f/0x7f [rpcrdma] Mar 30 13:21:45 klimt kernel: svc_rdma_send_write_chunk+0x59/0xce [rpcrdma] Mar 30 13:21:45 klimt kernel: svc_rdma_sendto+0xf9/0x3ae [rpcrdma] Mar 30 13:21:45 klimt kernel: ? nfsd_destroy+0x51/0x51 [nfsd] Mar 30 13:21:45 klimt kernel: svc_send+0x105/0x1e3 [sunrpc] Mar 30 13:21:45 klimt kernel: nfsd+0xf2/0x149 [nfsd] Mar 30 13:21:45 klimt kernel: kthread+0xf6/0xfb Mar 30 13:21:45 klimt kernel: ? kthread_queue_delayed_work+0x74/0x74 Mar 30 13:21:45 klimt kernel: ret_from_fork+0x3a/0x50 Mar 30 13:21:45 klimt kernel: Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue ib_umad ib_ipoib mlx4_ib sb_edac x86_pkg_temp_thermal iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel glue_helper crypto_simd cryptd pcspkr rpcrdma i2c_i801 rdma_ucm lpc_ich mfd_core ib_iser rdma_cm iw_cm ib_cm mei_me raid0 libiscsi mei sg scsi_transport_iscsi ioatdma wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter nfsd nfs_acl lockd auth_rpcgss grace sunrpc ip_tables xfs libcrc32c mlx4_en sd_mod sr_mod cdrom mlx4_core crc32c_intel igb nvme i2c_algo_bit ahci i2c_core libahci nvme_core dca libata t10_pi qedr dm_mirror dm_region_hash dm_log dm_mod dax qede qed crc8 ib_uverbs ib_core Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 Mar 30 13:21:45 klimt kernel: ---[ end trace 87971d2ad3429424 ]--- It's absolutely not safe to use resources pointed to by the @send_wr argument of ib_post_send() _after_ that function returns. Those resources are typically freed by the Send completion handler, which can run before ib_post_send() returns. Thus the trace points currently around ib_post_send() in the server's RPC/RDMA transport are a hazard, even when they are disabled. Rearrange them so that they touch the Work Request only _before_ ib_post_send() is invoked. Fixes: bd2abef3 ("svcrdma: Trace key RDMA API events") Fixes: 4201c746 ("svcrdma: Introduce svc_rdma_send_ctxt") Signed-off-by:
-
Brian Foster authored
commit 4b674b9a upstream. The filesystem freeze sequence in XFS waits on any background eofblocks or cowblocks scans to complete before the filesystem is quiesced. At this point, the freezer has already stopped the transaction subsystem, however, which means a truncate or cowblock cancellation in progress is likely blocked in transaction allocation. This results in a deadlock between freeze and the associated scanner. Fix this problem by holding superblock write protection across calls into the block reapers. Since protection for background scans is acquired from the workqueue task context, trylock to avoid a similar deadlock between freeze and blocking on the write lock. Fixes: d6b636eb ("xfs: halt auto-reclamation activities while rebuilding rmap") Reported-by:
Paul Furtado <paulfurtado91@gmail.com> Signed-off-by:
Chandan Rajendra <chandanrlinux@gmail.com> Reviewed-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
-
Jason Gunthorpe authored
commit c799fca8 upstream. Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b69614 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
David Howells authored
commit 0e631eee upstream. Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6 socket as well as UDPv6 when trying to transmit fragmentably. Without this, packets filled to the normal size used by the kernel AFS client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE immediately. The ->sk_error_report() notification hook is called, but rxrpc doesn't generate a trace for it. This is a temporary fix; a more permanent solution needs to involve changing the size of the packets being filled in accordance with the MTU, which isn't currently done in AF_RXRPC. The reason for not doing so was that, barring the last packet in an rx jumbo packet, jumbos can only be assembled out of 1412-byte packets - and the plan was to construct jumbos on the fly at transmission time. Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to engage in this anyway since fragmentation is only done by the sender. We can then condense the switch-statement in rxrpc_send_data_packet(). Fixes: 75b54cb5 ("rxrpc: Add IPv6 support") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
