- 20 Apr, 2023 11 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Preparation of ALC712 support with different types of SoundWire devices per link, new RaptorLake SoundWire device, better error handling for Cirrus devices and cosmetic changes for Max98373. Bard Liao (3): ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not aggregated ASoC: Intel: sof_sdw: support different devices on the same sdw link ASoC: Intel: sof_sdw: append codec type to dai link name Curtis Malainey (1): ASoC: Intel: sof_cirrus_common: Guard against missing buses Yong Zhi (2): ASoC: Intel: sof_sdw: remove late_probe flag in struct sof_sdw_codec_info ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to static call apoorv (1): ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL match table sound/soc/intel/boards/sof_cirrus_common.c | 7 +- sound/soc/intel/boards/sof_sdw.c | 181 ++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 3 - sound/soc/intel/boards/sof_sdw_max98373.c | 22 +-- .../intel/common/soc-acpi-intel-rpl-match.c | 17 +- 5 files changed, 152 insertions(+), 78 deletions(-) -- 2.37.2 -
Simon Trimmer authored
cs35l56_mbox_send() logs a warning when sending a mbox command fails so the callers can be simplified. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230420102043.1151830-1-rf@opensource.cirrus.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
The es8316 driver uses a register range to specify the single volatile register it has. While the cost will be in the noise this is a bunch of overhead compared to just having a volatile_reg() callback so switch to the callback. Signed-off-by:
-
Ranjani Sridharan authored
Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again to stop the DMA trace. But with IPC4, this is not needed as the trace is stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to set the D0I3 state again when the DSP is in D0I3 already results in an imbalance in PM runtime states in the firmware. So split the set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC when the DSP is already in D0I3 with IPC4. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Bard Liao authored
The existing sdw_sof machine driver constructs two SoundWire interfaces by direction and sdw link id. It means that we will have exactly the same dai link name if two dai links are on the same sdw link with the same direction. The new Realtek codec has two SoundWire interfaces for jack and DMIC functions and they are treated as different codecs. To create two dai links for jack and DMIC, we need to have different dai link names. This patch suggests to append codec type if there are two or more different types of devices on the same sdw bus. Signed-off-by:
-
Bard Liao authored
The existing code assumes all devices on the same soundwire link are the same devices. eg. all rt1316. This commit removes the assumption and supports different devices on the same soundwire link. Signed-off-by:
-
Bard Liao authored
We assume adr_link->num_adr = 1 if a device is not aggregated. However, the assumption is not valid if there are different type devices on the same soundwire link. Signed-off-by:
-
Yong Zhi authored
sof_sdw_mx8373_late_probe is only used in sof_sdw_max98373, so it should be static and rename it to 'mx8373_sdw_late_probe'. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Yong Zhi authored
Just use codec_card_late_probe ptr in struct sof_sdw_codec_info for validation check and drop late_probe variable. Signed-off-by:
-
apoorv authored
RT711 sdca sdw is added with SDW2 link for RPL-P CRB platform. Signed-off-by:
apoorv <apoorv@intel.com> Signed-off-by:
-
Curtis Malainey authored
Even if we find a acpi device we can still be missing the physical node. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
- 19 Apr, 2023 2 commits
-
-
Shengjiu Wang authored
This reverts commit 33683cbf ("ASoC: fsl: remove unnecessary dai_link->platform"). dai_link->platform is needed. The platform component is "snd_dmaengine_pcm", which is registered from cpu driver, If dai_link->platform is not assigned, then platform component will not be probed, then there will be issue: aplay: main:831: audio open error: Invalid argument Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Christophe JAILLET authored
dev_err_probe() already display the error code. There is no need to duplicate it explicitly in the error message. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/c167c16a535049d56f817bbede9c9f6f0a0f4c68.1681626553.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
- 18 Apr, 2023 12 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These patches make some small changes to align with the B0 silicon revision.
-
Richard Fitzgerald authored
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest datasheet. Signed-off-by:
-
Richard Fitzgerald authored
The mixer source index value for SDW2RX1 is different between A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2 just remove it as a mixer source option. Signed-off-by:
-
Richard Fitzgerald authored
Reduce SDW1 to 4 channels and remove the controls for SDW1 TX5 and TX6. The TX5 and TX6 channels have been removed from B0 silicon. There is no need to support them on A1 silicon. Signed-off-by:
-
Richard Fitzgerald authored
EINT20 contains wake-source interrupts and also interface-blocked interrupts, which all default to unmasked after reset or wake. The comment in cs35l56_init() only mentioned the wake interrupts. Update the comment so it's clear that it's intentional to also mask the *_BLOCKED interrupts. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The probe already stores pointer to &pdev->dev, so use it to make the code a bit easier to read. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by:
-
Saalim Quadri authored
Convert the WM8728 audio CODEC bindings to DT schema Signed-off-by:
Saalim Quadri <danascape@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230417204323.137681-1-danascape@gmail.comSigned-off-by:
-
Tom Rix authored
clang build reports sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare] if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ This is a bug, a logical-or should have been used. Fixes: fc0b096c ("ASoC: nau8825: Add delay control for input path") Signed-off-by:Tom Rix <trix@redhat.com> Acked-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Code can be a bit simpler with dev_err_probe(). Signed-off-by:
-
Saalim Quadri authored
Convert the WM8737 audio CODEC bindings to DT schema Signed-off-by:
-
- 17 Apr, 2023 13 commits
-
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Various code improvements. These remove redundant code and clean up less-than-optimal original implementations.
-
Liliang Ye authored
of_node_put() should have been done directly after mqs_priv->regmap = syscon_node_to_regmap(gpr_np); otherwise it creates a reference leak on the success path. To fix this, of_node_put() is moved to the correct location, and change all the gotos to direct returns. Fixes: a9d27367 ("ASoC: fsl_mqs: Fix error handling in probe") Signed-off-by:
Liliang Ye <yll@hust.edu.cn> Reviewed-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cnSigned-off-by:
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: ASoC is using many type of mutex lock, but some of them has helper function, but some doesn't. Or, it has helper function, but is static. This patch-set adds helper function and use it.
-
Kuninori Morimoto authored
ASoC need to use card->mutex with _INIT or _RUNTIME, but there is no helper function for it. This patch adds its helper function and use it. Because people might misunderstand that _init() is mutex initialization, this patch renames _INIT to _ROOT and adds new snd_soc_card_mutex_lock_root() for it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a5zlx3tw.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(), but other files can't use it because it is static function. It requests snd_soc_pcm_runtime as parameter (A), but sometimes we want to use it by snd_soc_card (B). (A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd) { mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass); } ^^^^^^^^^ (B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass); ^^^^ We want to use it with both "rtd" and "card" for dapm lock/unlock. To enable it, this patch uses _Generic macro. This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on each files. Signed-off-by: -
Kuninori Morimoto authored
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and many drivers are using it, but soc-dapm.c is not. 1st reason is snd_soc_dapm_mutex_lock/unlock() requests snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c needs to use snd_soc_card (B). (A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm) { mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); } ^^^^^^^^^^ (B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); ^^^^ 2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(), but helper is using _RUNTIME (A). The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT" for dapm lock/unlock. To enable this selfish request, this patch uses _Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both dapm and card case. snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm); snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card); Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested(). This patch handles mutex_lock() as mutex_lock_nested(..., 0), in other words, handles below as same. mutex_lock(&card->dapm_mutex); mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT); Because people might misunderstand that _init() is mutex initialization, this patch renames _INIT to _ROOT and adds new snd_soc_dapm_mutex_lock_root() for it. This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h to soc.h to keep related code together. Because very complex soc.h vs soc-dapm.h relationship, it is difficult/impossible to define these helper into soc-dapm.h. Signed-off-by: -
Saalim Quadri authored
Convert the WM8753 audio codec bindings to DT schema. Signed-off-by:
-
Paweł Anikiel authored
The SSM260x chips have an internal MCLK /2 divider (bit D7 in register R8). Add logic that allows for more MCLK values using this divider. Signed-off-by:
Paweł Anikiel <pan@semihalf.com> Link: https://lore.kernel.org/r/20230414140203.707729-7-pan@semihalf.comSigned-off-by:
-
Simon Trimmer authored
cs35l56_remove() always returns 0. Two of the functions that call it are void and the other one should only return 0. So there's no point returning anything from cs35l56_remove(). Signed-off-by:
-
Simon Trimmer authored
dsp_ready_completion is redundant and can be replaced by a call flush_work() to wait for cs35l56_dsp_work() to complete. As the dsp_work is queued by component_probe() it must run before other ASoC component callbacks and therefore there is no risk of calling flush_work() before the dsp_work() has been queued. Signed-off-by:
-
Simon Trimmer authored
Moving the wait from the beginning of the cs35l56_dsp_work() into cs35l56_component_probe() will prevent the limbo situation that is an artifact of the two stage SoundWire driver probe and initialisation where the card is all registered and shows in ALSA but doesn't actually work because the hardware didn't enumerate. The other bus drivers perform the probe and init sequentially and are not susceptible to this issue. Signed-off-by:
-
Simon Trimmer authored
There is no reason to have such a tight usleep range of 400us and it is acceptable to allow MIN_US * 2. Also wrap the usleep in an inline function. Signed-off-by:
-
Simon Trimmer authored
The irq member was being set before calling the init function and then cs35l56_irq_request() was called only when the init was successful. However cs35l56_release() calls devm_free_irq() when the irq member is set and therefore if init() fails then this will cause an attempted free of an unallocated IRQ. Instead pass the desired IRQ number to the cs35l56_irq_request() function and set cs35l56->irq only when it has been successfully allocated. Signed-off-by:
-
- 14 Apr, 2023 2 commits
-
-
David Lin authored
Change the original fixed delay to the assignment from property. It will make more flexible to different platforms for avoiding pop noise at the beginning of recording. Signed-off-by:
-
David Lin authored
Change the original fixed delay to the assignment from property. It will make more flexible to different platforms for avoiding pop noise at the beginning of recording. Signed-off-by:
-
