- 07 Jan, 2011 3 commits
-
-
Yong Shen authored
add i2c platform data and clock Signed-off-by:
Yong Shen <yong.shen@freescale.com> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de>
-
Yong Shen authored
1. Adjust FEC base address name to fit macro definition 2. Add platform data and reset function for FEC Signed-off-by:
-
Richard Zhao authored
Signed-off-by:
Richard Zhao <richard.zhao@freescale.com> Signed-off-by:
-
- 04 Jan, 2011 2 commits
-
-
Yong Shen authored
1. Add entries to Kconfig 2. Add machine definition 3. Add Uart platform data, pad setting and base address 4. Adjust GPIO irq number Signed-off-by:
Yong Shen <yong.shen@linaro.org> Signed-off-by:
-
Yong Shen authored
1. pll_base address should return right value 2. uart parent clk is from pll3 Signed-off-by:
-
- 03 Jan, 2011 18 commits
-
-
Sascha Hauer authored
Signed-off-by: -
Sascha Hauer authored
Signed-off-by: -
Fabio Estevam authored
MX27_3DS board has a MC13783 PMIC connected to the CSPI2 port. Add support for the PMIC. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Arnaud Patard (Rtp) authored
Current code doesn't really enable the usb clocks so if they're disabled when booting linux, the kernel/machine will hang as soon as someone is trying to read a usb register Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
-
Arnaud Patard (Rtp) authored
Signed-off-by:
-
Arnaud Patard (Rtp) authored
This patch is fixing some issues : - MXC_OTG_UCTRL_OPM_BIT is for USBCTRL register and not PHYCTRL register. - the MXC_EHCI_WAKEUP_ENABLED check was only clearing the bits so never allows to set them. Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
Fabio Estevam authored
Signed-off-by:
-
git://git.pengutronix.de/git/ukl/linux-2.6Sascha Hauer authored
Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 into imx-for-2.6.38-new
-
Richard Zhao authored
Add basic function and uart device support. Signed-off-by:
-
Richard Zhao authored
Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by:
-
Richard Zhao authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Richard Zhao authored
mx5 SoCs have different GPIO port count. Signed-off-by:
-
Richard Zhao authored
Signed-off-by:
-
Richard Zhao authored
Signed-off-by:
-
- 20 Dec, 2010 13 commits
-
-
Shawn Guo authored
Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
-
Shawn Guo authored
Add initial mx28evk support with duart and fec0. Signed-off-by:
-
Shawn Guo authored
Add initial mx23evk support with duart. Signed-off-by:
-
Shawn Guo authored
Dynamically allocate fec devices for MX28, which gets dual fec interface. Signed-off-by:
-
Shawn Guo authored
Dynamically allocate duart devices for MX23 and MX28. Signed-off-by:
-
Shawn Guo authored
Create static memory mapping for MX23 and MX28. Signed-off-by:
-
Shawn Guo authored
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by:
-
Shawn Guo authored
MXS-based SoCs implements iomux functions in block PINCTRL. Signed-off-by:
-
Shawn Guo authored
MXS-based SoCs implement gpio support in block PINCTRL. Signed-off-by:
-
Shawn Guo authored
There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by:
-
Shawn Guo authored
- DEBUG_LL support, which is incompatible with multi-soc MXS image because of different DUART base address on MX23 and MX28 - uncompress message support Signed-off-by:
-
Shawn Guo authored
Add Interrupt Collector (ICOLL) support for MXS-based. Signed-off-by:
-
Shawn Guo authored
- The mxs wdog is implemented in RTC block. - There is a generic software reset routine for most modules on mxs. Signed-off-by:
-
- 15 Dec, 2010 2 commits
-
-
Sascha Hauer authored
This iomux file has been constructed from the Freescale pinmux tool. It contains all pins from the tool, but the datasheet lists some configurations not present in the tool, these are not yet added. Signed-off-by: -
Lothar Waßmann authored
This patch actually replaces the 'struct pad_desc' with a u64 cookie to facilitate adding platform specific pad_ctrl settings to an existing pad definition. So, instead of: iomux_v3_cfg_t power_key = MX51_PAD_EIM_A27__GPIO_2_21; power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2; mxc_iomux_v3_setup_pad(&power_key); one can write: mxc_iomux_v3_setup_pad((MX51_PAD_EIM_A27__GPIO_2_21 & ~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2); Patch applies to branch 'imx-for-2.6.38' of git://git.pengutronix.de/git/imx/linux-2.6Signed-Off-By:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
- 14 Dec, 2010 2 commits
-
-
Fabio Estevam authored
Signed-off-by:
-
Arnaud Patard (Rtp) authored
When building as module: ERROR: "cpufreq_gov_performance" [arch/arm/plat-mxc/cpufreq.ko] undefined! WARNING: modpost: Found 1 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 It's due to the driver using CPUFREQ_DEFAULT_GOVERNOR, even it should not (see commit 8122c6ce in Linus tree), so remove it. Signed-off-by:
-
