- 14 Feb, 2022 9 commits
-
-
Christian König authored
It makes sense to have this in the common manager for debugging and accounting of how much resources are used. v2: cleanup kerneldoc a bit v3: drop the atomic, update counter under lock instead Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Reviewed-by: Matthew Auld <matthew.auld@intel.com> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-2-christian.koenig@amd.com
-
Christian König authored
Leave the man->size units as driver defined. Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-1-christian.koenig@amd.comReviewed-by: Matthew Auld <matthew.auld@intel.com>
-
Hsin-Yi Wang authored
List panel under aux-bus node if it's connected to anx7625's aux bus. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-4-hsinyi@chromium.org
-
Hsin-Yi Wang authored
Support reading edid through aux channel if panel is connected to aux bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function: 1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move anx7625_parse_dt() after. 2. Use pm runtime autosuspend since aux transfer function is called multiple times when reading edid. 3. No-op if aux transfer length is 0. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-3-hsinyi@chromium.org
-
Hsin-Yi Wang authored
Use devm_kzalloc instead of kzalloc and drop kfree(). Let the memory handled by driver detach. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-2-hsinyi@chromium.org
-
Xin Ji authored
Send DPCD command to downstream before anx7625 power down, let downstream monitor enter into standby mode. Signed-off-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-1-hsinyi@chromium.org
-
Paul Boddie authored
We have to make sure that - JZ_LCD_OSDC_ALPHAEN is set - plane f0 is disabled as it's not working yet Tested on MIPS Creator CI20 board. Signed-off-by: Paul Boddie <paul@boddie.org.uk> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Fixes: ef2f5d0a ("drm/ingenic: prepare ingenic drm for later addition of JZ4780") Signed-off-by: Paul Cercueil <paul@crapouillou.net> [pcercuei: add proper fixes commit, slightly reword commit description] Link: https://patchwork.freedesktop.org/patch/msgid/9d3a2000d2bb014f1afb0613537bdc523202135d.1644681054.git.hns@goldelico.com
-
Thomas Zimmermann authored
Set the VM_DONTDUMP flag on mmap'ed VMAs to omit them from core dumps. It's display-buffer memory; who knows what secrets these buffers contain. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Initialize default vm_ops in static initialization of the GEM SHMEM funcs, instead of the mmap code. It's simply better style. GEM helpers will later set a VMA's vm_ops from the default automatically. v2: * also update the drivers that build upon GEM SHMEM Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-2-tzimmermann@suse.de
-
- 12 Feb, 2022 2 commits
-
-
Sam Ravnborg authored
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC. Based on .txt binding from Zubair Lutfullah Kakakhel Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/c806c6007f7bb090bf96ff6bd827f03e88bf4712.1644675566.git.hns@goldelico.com
-
Erico Nunes authored
Currently when users try to run an application with lima and that hits an issue such as a timeout, a message saying "fail to save task state" and "error task list is full" is shown in dmesg. The error task dump is a debug feature disabled by default, so the error task list is usually not going to be available at all. The message can be misleading and creates confusion in bug reports. We can avoid that code path and that particular message when the user has not explicitly set the max_error_tasks parameter to enable the feature. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Reviewed-by: Qiang Yu <yuq825@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209093700.30901-1-nunes.erico@gmail.com
-
- 11 Feb, 2022 4 commits
-
-
Andrey Grodzovsky authored
Update function name. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211205500.601391-1-andrey.grodzovsky@amd.com
-
Alex Bee authored
The Bifrost GPU in Rockchip RK356x SoCs has a core and a bus clock. Reflect this in the SoC specific part of the binding. Signed-off-by: Alex Bee <knaerzche@gmail.com> [move the changes to the SoC section] Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220209215549.94524-2-michael.riesch@wolfvision.net
-
Alyssa Rosenzweig authored
The IDVS group size feature was missing. It is used on some Bifrost and Valhall GPUs, and is the last kernel-relevant Bifrost feature we're missing. This feature adds an extra IDVS group size field to the JM_CONFIG register. In kbase, the value is configurable via the device tree; kbase uses 0xF as a default if no value is specified. Until we find a device demanding otherwise, let's always set the 0xF default on devices which support this feature mimicking kbase's behaviour. Tuning this register slightly improves performance of index-driven vertex shading. On Mali-G52 (with Mesa), overall glmark2 score is improved from 1026 to 1037. Geometry-heavy scenes like -bshading are improved from 1068 to 1098. Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211145849.3148-1-alyssa.rosenzweig@collabora.com
-
Christian König authored
It is illegal to add a dma_fence_chain as timeline point. Flatten out the fences into a dma_fence_array instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220209182600.434803-1-christian.koenig@amd.com
-
- 10 Feb, 2022 7 commits
-
-
Neil Armstrong authored
When the dw-hdmi bridge is in first place of the bridge chain, this means there is no way to select an input format of the dw-hdmi HW component. Since introduction of display-connector, negotiation was broken since the dw-hdmi negotiation code only worked when the dw-hdmi bridge was in last position of the bridge chain or behind another bridge also supporting input & output format negotiation. Commit 7cd70656 ("drm/bridge: display-connector: implement bus fmts callbacks") was introduced to make negotiation work again by making display-connector act as a pass-through concerning input & output format negotiation. But in the case where the dw-hdmi is single in the bridge chain, for example on Renesas SoCs, with the display-connector bridge the dw-hdmi is no more single, breaking output format. Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 6c3c7199 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: add proper fixes commit] Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
-
Thomas Zimmermann authored
Clip the damage area horizontally if only a single scanline has been changed. This is helpful to reduce the memcpy overhead for small writes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Write helpers used to mark the complete screen as dirty. This is wasteful for writes that only change a small portion of the screen. Fix the problem by computing the damaged area from the written memory range and perform damage handling accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
Add drm_fb_helper_memory_range_to_clip(), a helper function that accepts an linear range of video memory and converts it into a rectangle. The computed rectangle describes the damaged area in terms of scanlines and pixels per scanline. While at it, make the code more readable by using struct drm_rect and related helpers. The code was previously part of the deferred I/O helpers, but is also useful for damage handling of regular write operations. Update the deferred I/O code to use the new function. v2: * rename helper (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Don't clip the damage rectangle against the viewport. This only works if the viewport is located at the beginning of the video memory and the video memory doesn't extend the screen (i.e., if there's no overallocation). Fbdev emulation transfers data from write operations into a possible shadow buffer, then into a GEM buffer object, and finally via graphics driver onto the screen. If callers write outside the currently visible area, clipping the damage rectangle against the viewport will loose these updates in the shadow buffer and the fbdev's buffer object will contain stale data. Panning the viewport to the stale area of the buffer will display obsolete data. Instead, mark all written areas as damaged, so that the damage handler updates the buffer object from the shadow buffer for all such areas. The graphics driver's later has the option of clipping the damaged area against the viewport when updating the screen from the buffer object. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Computing the clip rectangle is prone to off-by-one errors when writes happen near the end of a memory page. Point the end of the memory area to the first trailing byte, so that (end - start) returns the area's length. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-2-tzimmermann@suse.de
-
Andrey Grodzovsky authored
Seems I forgot to add this to the relevant commit when submitting. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220210031724.440943-1-andrey.grodzovsky@amd.com
-
- 09 Feb, 2022 11 commits
-
-
Andrey Grodzovsky authored
Since we have a single instance of reset semaphore which we lock only once even for XGMI hive we don't need the nested locking hint anymore. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74120.html
-
Andrey Grodzovsky authored
This functions needs to be split into 2 parts where one is called only once for locking single instance of reset_domain's sem and reset flag and the other part which handles MP1 states should still be called for each device in XGMI hive. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74118.html
-
Andrey Grodzovsky authored
We should have a single instance per entrire reset domain. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74116.html
-
Andrey Grodzovsky authored
We want single instance of reset sem across all reset clients because in case of XGMI we should stop access cross device MMIO because any of them could be in a reset in the moment. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74117.html
-
Andrey Grodzovsky authored
The reset domain contains register access semaphor now and so needs to be present as long as each device in a hive needs it and so it cannot be binded to XGMI hive life cycle. Adress this by making reset domain refcounted and pointed by each member of the hive and the hive itself. v4: Fix crash on boot witrh XGMI hive by adding type to reset_domain. XGMI will only create a new reset_domain if prevoius was of single device type meaning it's first boot. Otherwsie it will take a refocunt to exsiting reset_domain from the amdgou device. Add a wrapper around reset_domain->refcount get/put and a wrapper around send to reset wq (Lijo) Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74121.html
-
Andrey Grodzovsky authored
Since now all GPU resets are serialzied there is no need for this. This patch also reverts 'drm/amdgpu: race issue when jobs on 2 ring timeout' Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74119.html
-
Andrey Grodzovsky authored
Since we serialize all resets no need to protect from concurrent resets. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74115.html
-
Andrey Grodzovsky authored
No need to to trigger another work queue inside the work queue. v3: Problem: Extra reset caused by host side FLR notification following guest side triggered reset. Fix: Preven qeuing flr_work from mailbox irq if guest already executing a reset. Suggested-by: Liu Shaoyun <Shaoyun.Liu@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Liu Shaoyun <Shaoyun.Liu@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74114.html
-
Andrey Grodzovsky authored
Use reset domain wq also for non TDR gpu recovery trigers such as sysfs and RAS. We must serialize all possible GPU recoveries to gurantee no concurrency there. For TDR call the original recovery function directly since it's already executed from within the wq. For others just use a wrapper to qeueue work and wait on it to finish. v2: Rename to amdgpu_recover_work_struct Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74113.html
-
Andrey Grodzovsky authored
Before we initialize schedulers we must know which reset domain are we in - for single device there iis a single domain per device and so single wq per device. For XGMI the reset domain spans the entire XGMI hive and so the reset wq is per hive. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74112.html
-
Andrey Grodzovsky authored
Defined a reset_domain struct such that all the entities that go through reset together will be serialized one against another. Do it for both single device and XGMI hive cases. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Suggested-by: Christian König <ckoenig.leichtzumerken@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74111.html
-
- 08 Feb, 2022 7 commits
-
-
Lyude Paul authored
Currently we can get a warning on systems with eDP backlights like so: nv_backlight: invalid backlight type WARNING: CPU: 4 PID: 454 at drivers/video/backlight/backlight.c:420 backlight_device_register+0x226/0x250 This happens as a result of us not filling out props.type for the eDP backlight, even though we do it for all other backlight types. Since nothing in our driver uses anything but BACKLIGHT_RAW, let's take the props\.type assignments out of the codepaths for individual backlight types and just set it unconditionally to prevent this from happening again. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 6eca310e ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau") Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204193319.451119-1-lyude@redhat.com
-
Lyude Paul authored
It seems that some laptops will report having both an eDP and LVDS connector, even though only the LVDS connector is actually hooked up. This can lead to issues with backlight registration if the eDP connector ends up getting registered before the LVDS connector, as the backlight device will then be registered to the eDP connector instead of the LVDS connector. So, fix this by only registering the backlight on connectors that are reported as being connected. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 6eca310e ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau") Bugzilla: https://gitlab.freedesktop.org/drm/nouveau/-/issues/137 Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204180504.328999-1-lyude@redhat.com
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worse scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207233923.GA524723@embeddedor
-
Thomas Zimmermann authored
Add helpers for initializing SIL164-based connectors. These used to be handled by the VGA connector code. But SIL164 provides output via DVI-I, so set the encoder and connector types accordingly. If a SIL164 chip has been detected, ast will now create a DVI-I connector instead of a VGA connector. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Add helpers for DP501-based connectors. DP501 provides output via DisplayPort. This used to be handled by the VGA connector code. If a DP501 chip has been detected, ast will now create a DisplayPort connector instead of a VGA connector. Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also remove the call to drm_connector_update_edid_property(), which is performed by drm_get_edid(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Read the encoder's possible-CRTC mask from the involved CRTC instead of hard-coding it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Move encoder and connector initialization into a single helper and put all related mode-setting structures into a single place. Done in preparation of moving transmitter code into separate helpers. No functional changes. v2: * move encoder CRTC bitmask fix into separate patch (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-7-tzimmermann@suse.de
-