- 20 Nov, 2014 16 commits
-
-
Jan Kara authored
commit ece9c72a upstream. Priority of a merged request is computed by ioprio_best(). If one of the requests has undefined priority (IOPRIO_CLASS_NONE) and another request has priority from IOPRIO_CLASS_BE, the function will return the undefined priority which is wrong. Fix the function to properly return priority of a request with the defined priority. Fixes: d58cdfb8Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Richard Guy Briggs authored
commit 897f1acb upstream. Add a space between subj= and feature= fields to make them parsable. Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Johannes Berg authored
commit 46238845 upstream. When an interface is deleted, an ongoing hardware scan is canceled and the driver must abort the scan, at the very least reporting completion while the interface is removed. However, if it scheduled the work that might only run after everything is said and done, which leads to cfg80211 warning that the scan isn't reported as finished yet; this is no fault of the driver, it already did, but mac80211 hasn't processed it. To fix this situation, flush the delayed work when the interface being removed is the one that was executing the scan. Reported-by:
Sujith Manoharan <sujith@msujith.org> Tested-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit ff1e417c upstream. Due to the time it takes to process the beacon that started the CSA process, we may be late for the switch if we try to reach exactly beacon 0. To avoid that, use count - 1 when calculating the switch time. Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit 84469a45 upstream. If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Reported-by:
-
Krzysztof Kozlowski authored
commit cdaf3e15 upstream. The charger manager obtained in probe references to power supplies for all chargers with power_supply_get_by_name() for later usage. However if such charger driver was removed then this reference would point to old power supply (from driver which was removed). This lead to accessing invalid memory which could be observed with: $ echo "max77693-charger" > /sys/bus/platform/drivers/max77693-charger/unbind $ grep . /sys/devices/virtual/power_supply/battery/charger.0/* $ grep . /sys/devices/virtual/power_supply/battery/* [ 15.339817] Unable to handle kernel paging request at virtual address 0001c12c [ 15.346187] pgd = edd08000 [ 15.348814] [0001c12c] *pgd=6dce2831, *pte=00000000, *ppte=00000000 [ 15.355075] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 15.360967] Modules linked in: [ 15.364010] CPU: 2 PID: 1388 Comm: grep Not tainted 3.17.0-next-20141007-00027-ga95e761db1b0 #245 [ 15.372859] task: ee03ad00 ti: edcf6000 task.ti: edcf6000 [ 15.378241] PC is at 0x1c12c [ 15.381113] LR is at is_ext_pwr_online+0x30/0x6c [ 15.385706] pc : [<0001c12c>] lr : [<c0339fc4>] psr: a0000013 [ 15.385706] sp : edcf7e88 ip : 00000000 fp : 00000000 [ 15.397161] r10: eeb02c08 r9 : c04b1f84 r8 : eeb02c00 [ 15.402369] r7 : edc69a10 r6 : eea6ac10 r5 : eea6ac10 r4 : 00000004 [ 15.408878] r3 : 0001c12c r2 : edcf7e8c r1 : 00000004 r0 : ee914418 [ 15.415390] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.422506] Control: 10c5387d Table: 6dd0804a DAC: 00000015 [ 15.428236] Process grep (pid: 1388, stack limit = 0xedcf6240) [ 15.434050] Stack: (0xedcf7e88 to 0xedcf8000) [ 15.438395] 7e80: ee03ad00 00000000 edcf7f80 eea6aca8 edcf7ec4 c033b7b0 [ 15.446554] 7ea0: 00000001 ee1cc3f0 00000004 c06e1e44 eebdc000 c06e1e44 eeb02c00 c0337144 [ 15.454713] 7ec0: ee2dac68 c005cffc ee1cc3c0 c06e1e44 00000fff 00001000 eebdc000 c0278ca8 [ 15.462872] 7ee0: c0278c8c ee1cc3c0 eeb7ce00 c014422c edcf7f20 00008000 ee1cc3c0 ee9a48c0 [ 15.471030] 7f00: 00000001 00000001 edcf7f80 c0142d94 c0142d70 c01060f4 00021000 ee1cc3f0 [ 15.479190] 7f20: 00000000 00000000 c06a2150 eebdc000 2e7ec000 ee9a48c0 00008000 00021000 [ 15.487349] 7f40: edcf7f80 00008000 edcf6000 00021000 00021000 c00e39a4 00000000 ee9a48c0 [ 15.495508] 7f60: 00004000 00000000 00000000 ee9a48c0 ee9a48c0 00008000 00021000 c00e3aa0 [ 15.503668] 7f80: 00000000 00000000 0001f2e0 0001f2e0 00021000 00001000 00000003 c000f364 [ 15.511826] 7fa0: 00000000 c000f1a0 0001f2e0 00021000 00000003 00021000 00008000 00000000 [ 15.519986] 7fc0: 0001f2e0 00021000 00001000 00000003 00000001 000205e8 00000000 00021000 [ 15.528145] 7fe0: 00008000 bebbe910 0000a7ad b6edc49c 60000010 00000003 aaaaaaaa aaaaaaaa [ 15.536320] [<c0339fc4>] (is_ext_pwr_online) from [<c033b7b0>] (charger_get_property+0x170/0x314) [ 15.545164] [<c033b7b0>] (charger_get_property) from [<c0337144>] (power_supply_show_property+0x48/0x20c) [ 15.554719] [<c0337144>] (power_supply_show_property) from [<c0278ca8>] (dev_attr_show+0x1c/0x48) [ 15.563577] [<c0278ca8>] (dev_attr_show) from [<c014422c>] (sysfs_kf_seq_show+0x84/0x104) [ 15.571725] [<c014422c>] (sysfs_kf_seq_show) from [<c0142d94>] (kernfs_seq_show+0x24/0x28) [ 15.579973] [<c0142d94>] (kernfs_seq_show) from [<c01060f4>] (seq_read+0x1b0/0x484) [ 15.587614] [<c01060f4>] (seq_read) from [<c00e39a4>] (vfs_read+0x88/0x144) [ 15.594552] [<c00e39a4>] (vfs_read) from [<c00e3aa0>] (SyS_read+0x40/0x8c) [ 15.601417] [<c00e3aa0>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 15.608877] Code: bad PC value [ 15.611991] ---[ end trace a88fcc95208db283 ]--- The charger-manager should get reference to charger power supply on each use of get_property callback. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 3bb3dbbd ("power_supply: Add initial Charger-Manager driver") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit bdbe8144 upstream. The charger manager obtained reference to fuel gauge power supply in probe with power_supply_get_by_name() for later usage. However if fuel gauge driver was removed and re-added then this reference would point to old power supply (from driver which was removed). This lead to accessing old (and probably invalid) memory which could be observed with: $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/unbind $ echo "12-0036" > /sys/bus/i2c/drivers/max17042/bind $ cat /sys/devices/virtual/power_supply/battery/capacity [ 240.480084] INFO: task cat:1393 blocked for more than 120 seconds. [ 240.484799] Not tainted 3.17.0-next-20141007-00028-ge60b6dd79570 #203 [ 240.491782] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.499589] cat D c0469530 0 1393 1 0x00000000 [ 240.505947] [<c0469530>] (__schedule) from [<c0469d3c>] (schedule_preempt_disabled+0x14/0x20) [ 240.514449] [<c0469d3c>] (schedule_preempt_disabled) from [<c046af08>] (mutex_lock_nested+0x1bc/0x458) [ 240.523736] [<c046af08>] (mutex_lock_nested) from [<c0287a98>] (regmap_read+0x30/0x60) [ 240.531647] [<c0287a98>] (regmap_read) from [<c032238c>] (max17042_get_property+0x2e8/0x350) [ 240.540055] [<c032238c>] (max17042_get_property) from [<c03247d8>] (charger_get_property+0x264/0x348) [ 240.549252] [<c03247d8>] (charger_get_property) from [<c0320764>] (power_supply_show_property+0x48/0x1e0) [ 240.558808] [<c0320764>] (power_supply_show_property) from [<c027308c>] (dev_attr_show+0x1c/0x48) [ 240.567664] [<c027308c>] (dev_attr_show) from [<c0141fb0>] (sysfs_kf_seq_show+0x84/0x104) [ 240.575814] [<c0141fb0>] (sysfs_kf_seq_show) from [<c0140b18>] (kernfs_seq_show+0x24/0x28) [ 240.584061] [<c0140b18>] (kernfs_seq_show) from [<c0104574>] (seq_read+0x1b0/0x484) [ 240.591702] [<c0104574>] (seq_read) from [<c00e1e24>] (vfs_read+0x88/0x144) [ 240.598640] [<c00e1e24>] (vfs_read) from [<c00e1f20>] (SyS_read+0x40/0x8c) [ 240.605507] [<c00e1f20>] (SyS_read) from [<c000e760>] (ret_fast_syscall+0x0/0x48) [ 240.612952] 4 locks held by cat/1393: [ 240.616589] #0: (&p->lock){+.+.+.}, at: [<c01043f4>] seq_read+0x30/0x484 [ 240.623414] #1: (&of->mutex){+.+.+.}, at: [<c01417dc>] kernfs_seq_start+0x1c/0x8c [ 240.631086] #2: (s_active#31){++++.+}, at: [<c01417e4>] kernfs_seq_start+0x24/0x8c [ 240.638777] #3: (&map->mutex){+.+...}, at: [<c0287a98>] regmap_read+0x30/0x60 The charger-manager should get reference to fuel gauge power supply on each use of get_property callback. The thermal zone 'tzd' field of power supply should not be used because of the same reason. Additionally this change solves also the issue with nested thermal_zone_get_temp() calls and related false lockdep positive for deadlock for thermal zone's mutex [1]. When fuel gauge is used as source of temperature then the charger manager forwards its get_temp calls to fuel gauge thermal zone. So actually different mutexes are used (one for charger manager thermal zone and second for fuel gauge thermal zone) but for lockdep this is one class of mutex. The recursion is removed by retrieving temperature through power supply's get_property(). In case external thermal zone is used ('cm-thermal-zone' property is present in DTS) the recursion does not exist. Charger manager simply exports POWER_SUPPLY_PROP_TEMP_AMBIENT property (instead of POWER_SUPPLY_PROP_TEMP) thus no thermal zone is created for this power supply. [1] https://lkml.org/lkml/2014/10/6/309Signed-off-by:
-
Krzysztof Kozlowski authored
commit 21e863b2 upstream. Memory allocated for 'name' was leaking if required binding properties were not present. The memory for 'name' was allocated early at probe with kasprintf(). It was freed in error paths executed before and after parsing DTS but not in that error path. Fix the error path for parsing device tree properties. Signed-off-by:
-
Krzysztof Kozlowski authored
commit 0eaf437a upstream. The power_supply_get_by_phandle() on error returns ENODEV or NULL. The driver later expects obtained pointer to power supply to be valid or NULL. If it is not NULL then it dereferences it in bq2415x_notifier_call() which would lead to dereferencing ENODEV-value pointer. Properly handle the power_supply_get_by_phandle() error case by replacing error value with NULL. This indicates that usb charger detection won't be used. Fix also memory leak of 'name' if power_supply_get_by_phandle() fails with NULL and probe should defer. Signed-off-by:
-
James Ralston authored
commit 690000b9 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 66a7cbc3 upstream. Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") disabled NCQ on them. It turns out that NCQ is fine as long as MSI is not used, so let's turn off MSI and leave NCQ on. Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> Fixes: 67809f85 ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks") Signed-off-by:
-
Simon Horman authored
commit aa1cf258 upstream. Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car controller needs to be run with DIPM disabled. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Heinz Mauelshagen authored
commit 40d43c4b upstream. The dm-raid superblock (struct dm_raid_superblock) is padded to 512 bytes and that size is being used to read it in from the metadata device into one preallocated page. Reading or writing this on a 512-byte sector device works fine but on a 4096-byte sector device this fails. Set the dm-raid superblock's size to the logical block size of the metadata device, because IO at that size is guaranteed too work. Also add a size check to avoid silent partial metadata loss in case the superblock should ever grow past the logical block size or PAGE_SIZE. [includes pointer math fix from Dan Carpenter] Reported-by:
"Liuhua Wang" <lwang@suse.com> Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Max Filippov authored
commit 2651cc69 upstream. Userspace actually passes single parameter (path name) to the umount syscall, so new umount just fails. Fix it by requesting old umount syscall implementation and re-wiring umount to it. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 9d28eb12 upstream. The shrinker uses gfp flags to indicate what kind of operation can the driver wait for. If __GFP_IO flag is present, the driver can wait for block I/O operations, if __GFP_FS flag is present, the driver can wait on operations involving the filesystem. dm-bufio tested for __GFP_IO. However, dm-bufio can run on a loop block device that makes calls into the filesystem. If __GFP_IO is present and __GFP_FS isn't, dm-bufio could still block on filesystem operations if it runs on a loop block device. The change from __GFP_IO to __GFP_FS supposedly fixes one observed (though unreproducible) deadlock involving dm-bufio and loop device. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit f2e323ec upstream. We need to add a limit check here so we don't overflow the buffer. Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by:
-
- 17 Nov, 2014 24 commits
-
-
Ilya Dryomov authored
commit 792c3a91 upstream. Need to use WQ_MEM_RECLAIM for our workqueues to prevent I/O lockups under memory pressure - we sit on the memory reclaim path. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Tested-by:
Micha Krause <micha@krausam.de> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit 255939e7 upstream. Fix to return -ENOMEM from the workqueue alloc error handling case instead of 0, as done elsewhere in this function. Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Ilya Dryomov authored
commit 58d1362b upstream. drivers/block/rbd.c: In function ‘rbd_dev_device_setup’: drivers/block/rbd.c:5090:19: warning: format not a string literal and no format arguments [-Wformat-security] Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Olivier Gay authored
commit f974008f upstream. Add keyboard input assist controls usages from approved hid usage table request HUTTR42: http://www.usb.org/developers/hidpage/HUTRR42c.pdfSigned-off-by:
Olivier Gay <ogay@logitech.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Adel Gadllah authored
commit 1af39588 upstream. This device needs the quirk as well. Tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by:
-
Adel Gadllah authored
commit 29d05c2e upstream. This device needs the quirk as well. Signed-off-by:
-
Oliver Neukum authored
commit 5235166f upstream. There is a second mouse sharing the same vendor strings but different IDs. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit 4980f957 upstream. This mouse keeps disconnecting in runlevel 3. It needs the ALWAYS_POLL quirk. Signed-off-by:
-
Johan Hovold authored
commit bfe3c873 upstream. Enable the always-poll quirk for Elan Touchscreens found on some recent Samsung laptops. Without this quirk the device keeps disconnecting from the bus (and is re-enumerated) unless opened (and kept open, should an input event occur). Note that while the device can be run-time suspended, the autosuspend timeout must be high enough to allow the device to be polled at least once before being suspended. Specifically, using autosuspend_delay_ms=0 will still cause the device to disconnect on input events. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 0b750b3b upstream. Add quirk to make sure that a device is always polled for input events even if it hasn't been opened. This is needed for devices that disconnects from the bus unless the interrupt endpoint has been polled at least once or when not responding to an input event (e.g. after having shut down X). Signed-off-by:
-
Jason Gerecke authored
commit 5989a55a upstream. The commit which introduced TransducerSerialNumber (368c9664) is missing two crucial implementation details. Firstly, the commit does not set the type/code/bit/max fields as expected later down the code which can cause the driver to crash when a tablet with this usage is connected. Secondly, the call to 'set_bit' causes MSC_PULSELED to be sent instead of the expected MSC_SERIAL. This commit addreses both issues. Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Eric Dumazet authored
commit 39bb5e62 upstream. Some drivers are unable to perform TX completions in a bound time. They instead call skb_orphan() Problem is skb_fclone_busy() has to detect this case, otherwise we block TCP retransmits and can freeze unlucky tcp sessions on mostly idle hosts. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: 1f3279ae ("tcp: avoid retransmits of TCP packets hanging in host queues") Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backport to 3.16 provided by Eric Dumzet ] Signed-off-by:
-
Roger Pau Monné authored
commit 61cecca8 upstream. Fix leaking a page when a grant mapping has failed. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reported-and-Tested-by:
Tao Chen <boby.chen@huawei.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Richard Genoud authored
commit 1bf1890e upstream. I ran into this error after a ubiupdatevol, because I forgot to backport e9110361 UBI: fix the volumes tree sorting criteria. UBI error: process_pool_aeb: orphaned volume in fastmap pool UBI error: ubi_scan_fastmap: Attach by fastmap failed, doing a full scan! kmem_cache_destroy ubi_ainf_peb_slab: Slab cache still has objects CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.18-00053-gf05cac8dbf85 #1 [<c000d298>] (unwind_backtrace) from [<c000baa8>] (show_stack+0x10/0x14) [<c000baa8>] (show_stack) from [<c01b7a68>] (destroy_ai+0x230/0x244) [<c01b7a68>] (destroy_ai) from [<c01b8fd4>] (ubi_attach+0x98/0x1ec) [<c01b8fd4>] (ubi_attach) from [<c01ade90>] (ubi_attach_mtd_dev+0x2b8/0x868) [<c01ade90>] (ubi_attach_mtd_dev) from [<c038b510>] (ubi_init+0x1dc/0x2ac) [<c038b510>] (ubi_init) from [<c0008860>] (do_one_initcall+0x94/0x140) [<c0008860>] (do_one_initcall) from [<c037aadc>] (kernel_init_freeable+0xe8/0x1b0) [<c037aadc>] (kernel_init_freeable) from [<c02730ac>] (kernel_init+0x8/0xe4) [<c02730ac>] (kernel_init) from [<c00093f0>] (ret_from_fork+0x14/0x24) UBI: scanning is finished Freeing the cache in the error path fixes the Slab error. Tested on at91sam9g35 (3.14.18+fastmap backports) Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Dan Streetman authored
commit 10ccaf17 upstream. In powerpc pseries platform dlpar operations, use device_online() and device_offline() instead of cpu_up() and cpu_down(). Calling cpu_up/down() directly does not update the cpu device offline field, which is used to online/offline a cpu from sysfs. Calling device_online/offline() instead keeps the sysfs cpu online value correct. The hotplug lock, which is required to be held when calling device_online/offline(), is already held when dlpar_online/offline_cpu() are called, since they are called only from cpu_probe|release_store(). This patch fixes errors on phyp (PowerVM) systems that have cpu(s) added/removed using dlpar operations; without this patch, the /sys/devices/system/cpu/cpuN/online nodes do not correctly show the online state of added/removed cpus. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Fixes: 0902a904 ("Driver core: Use generic offline/online for CPU offline/online") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sinclair Yeh authored
commit 9a72384d upstream. When screen objects are enabled, the bpp is assumed to be 32, otherwise it is set to 16. v2: * Use u32 instead of u64 for assumed_bpp. * Fixed mechanism to check for screen objects * Limit the back buffer size to VRAM. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Kirill Tkhai authored
commit f1e3a093 upstream. Probability of use-after-free isn't zero in this place. Signed-off-by:
Kirill Tkhai <ktkhai@parallels.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140922183636.11015.83611.stgit@localhostSigned-off-by:
Ingo Molnar <mingo@kernel.org> [ luis: backported to 3.16: used peterz's backport to 3.17 ] Signed-off-by:
-
Stephen Boyd authored
commit 8b374399 upstream. Frank reports that after continuing in kgdb the RX stale event doesn't occur until after the RX fifo is filled up with exactly the amount of characters programmed for the RX watermark (in this case it's 48). To read a single character from the uartdm hardware we force a stale event so that any characters in the RX packing buffer are flushed into the RX fifo immediately instead of waiting for a stale timeout or for the fifo to fill. Forcing that stale event asserts the stale interrupt but we never clear that interrupt via UART_CR_CMD_RESET_STALE_INT in the polling functions. So when kgdb continues the stale interrupt is left pending in the hardware and we don't timeout with a stale event, like we usually would if a user typed one character on the console, until the reset stale interrupt and stale event commands are sent. Frank could get things working again by running handle_rx_dm(). By putting enough characters into the fifo he could trigger a watermark interrupt, and thus cause handle_rx_dm() to run finally resetting the stale interrupt and enabling the stale event so that single characters would cause timeouts again. The fix is to just do what the interrupt routine was doing all along and clear the stale interrupt and enable the event again. Doing this also smooths over any differences in the fifo behavior between v1.3 and v1.4 hardware allowing us to skip forcing the uart into single character mode. Reviewed-by:
Frank Rowand <frank.rowand@sonymobile.com> Tested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bryan O'Donoghue authored
commit aece118e upstream. Intel processors which don't report cache information via cpuid(2) or cpuid(4) need quirk code in the legacy_cache_size callback to report this data. For Intel that callback is is intel_size_cache(). This patch enables calling of cpu_detect_cache_sizes() inside of init_intel() and hence the calling of the legacy_cache callback in intel_size_cache(). Adding this call will ensure that PIII Tualatin currently in intel_size_cache() and Quark SoC X1000 being added to intel_size_cache() in this patch will report their respective cache sizes. This model of calling cpu_detect_cache_sizes() is consistent with AMD/Via/Cirix/Transmeta and Centaur. Also added is a string to idenitfy the Quark as Quark SoC X1000 giving better and more descriptive output via /proc/cpuinfo Adding cpu_detect_cache_sizes to init_intel() will enable calling of intel_size_cache() on Intel processors which currently no code can reach. Therefore this patch will also re-enable reporting of PIII Tualatin cache size information as well as add Quark SoC X1000 support. Comment text and cache flow logic suggested by Thomas Gleixner Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: davej@redhat.com Cc: hmh@hmh.eng.br Link: http://lkml.kernel.org/r/1412641189-12415-3-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Axel Lin authored
commit 91ba0e59 upstream. Fix a copy-paste bug when converting to the control framework. Fixes: commit 5d478e0d ("[media] tda7432: convert to the control framework") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Antti Palosaari authored
commit f538e085 upstream. Maximum satellite symbol rate used is 45000000Sps which overflows when multiplied by 135. As final calculation result is fraction, we could use mult_frac macro in order to keep calculation inside 32 bit number limits and prevent overflow. Original bug and fix was provided by Nibble Max. I decided to implement it differently as it is now. Reported-by:
Nibble Max <nibble.max@gmail.com> Tested-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 29bbb7bd upstream. Add support for PCTV microStick (77e) device that uses a sms1140 chipset. Signed-off-by:
-
Paul Fertser authored
commit 62ea864f upstream. As reported on [1], this device needs this quirk to be able to reliably initialise the webcam. [1] http://ubuntuforums.org/showthread.php?t=2145996Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Maciej Matraszek authored
commit 3bacc10c upstream. Fix clamp_align() used in v4l_bound_align_image() to prevent overflow when passed large value like UINT32_MAX. In the current implementation: clamp_align(UINT32_MAX, 8, 8192, 3) returns 8, because in line: x = (x + (1 << (align - 1))) & mask; x overflows to (-1 + 4) & 0x7 = 3, while expected value is 8192. v4l_bound_align_image() is heavily used in VIDIOC_S_FMT and VIDIOC_SUBDEV_S_FMT ioctls handlers, and documentation of the latter explicitly states that: "The modified format should be as close as possible to the original request." -- http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-subdev-g-fmt.html Thus one would expect, that passing UINT32_MAX as format width and height will result in setting maximum possible resolution for the device. Particularly, when the driver doesn't support VIDIOC_ENUM_FRAMESIZES ioctl, which is common in the codebase. Fixes changeset: b0d3159bSigned-off-by:
Maciej Matraszek <m.matraszek@samsung.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
