* 'rmobile-latest' of git://github.com/pmundt/linux-sh: (21 commits)
  ARM: mach-shmobile: ag5evm needs CONFIG_I2C
  ARM: mach-shmobile: sh73a0 and AG5EVM PINT support
  ARM: mach-shmobile: Add support for PINT though INTC macros
  ARM: mach-shmobile: SDHI0 GPIO hotplug for AG5EVM
  ARM: mach-shmobile: Use common INTC IRQ code on sh73a0
  ARM: mach-shmobile: Use common INTC IRQ code on sh7372
  ARM: mach-shmobile: Use common INTC IRQ code on sh7377
  ARM: mach-shmobile: Use common INTC IRQ code on sh7367
  ARM: mach-shmobile: sh73a0 GPIO IRQ support
  ARM: sh7372 ap4evb NOR Flash USB boot fix
  ARM: mach-shmobile: sh7372 Mackerel NOR Flash USB boot fix
  sh: intc: Allow triggering on both edges for ARM SoCs
  ARM: mach-shmobile: Break out INTC IRQ code
  ARM: mach-shmobile: Kota2 SDHI0 and SDHI1 support
  ARM: mach-shmobile: Kota2 SCIFA4 and SCIFB support
  ARM: mach-shmobile: Kota2 MMCIF support
  ARM: mach-shmobile: Kota2 GPIO LEDs support
  ARM: mach-shmobile: Kota2 GPIO Keys support
  ARM: mach-shmobile: Kota2 KEYSC support
  ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: PXA: fix includes in pxa2xx_cm_x2xx PCMCIA driver
  ARM: PXA: fix gpio-pxa.h build errors
  ARM: 7142/1: davinci: mark GPIO implementation complex
  ARM: 7134/1: Revert "EXYNOS4: Fix routing timer interrupt to offline CPU"
  ARM: PXA: eseries: fix eseries_register_clks section mismatch warning
  ARM: PXA: fix lubbock PCMCIA driver build error

* 'next/move' of git://git.linaro.org/people/arnd/arm-soc:
  ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
  ARM: EXYNOS4: convert MCT to percpu interrupt API
  ARM: SAMSUNG: Add clk enable/disable of pwm
  ARM: SAMSUNG: Fix compile error due to kfree

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (w83627ehf) Fix broken driver init
  hwmon: (coretemp) Fix for non-SMP builds

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Revert the check of NO_PRESENCE pincfg default bit
  ALSA: hda - Fix a regression for DMA-position check with CA0110
  ALSA: hda - Fix silent output regression with ALC861
  ALSA: control: remove compilation warning on 32-bit
  ALSA: ua101: fix crash when unplugging

Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI
sensor types) results in kernel panic if data->temp_label was not
initialized.
The problem was found with chip W83627DHG-P.

Add check if data->temp->label was set before use.

Based on incomplete patch by Alexander Beregalov.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP
definition resolves to the correct value, just use this for both
cases.

Without this fix the temperature attributes are named temp0_* instead
of temp2_*, so libsensors won't pick them. Broken since kernel 3.0.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Phil Sutter <phil@nwl.cc>
Cc: stable@kernel.org
Acked-by: Durgadoss R <Durgadoss.r@intel.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

The implementation on commit [08a1f5eb: ALSA: hda - Check NO_PRESENCE
pincfg default bit] seems like a mis-interpretation of specification.
The spec gives the reversed bit definition.  But, following the spec
also causes to change so many existing device configurations, thus we
can't change it so easily for now.  For 3.2-rc1, it's safer to revert
this check (actually this patch comments out the code).

We may re-introduced the fixed version once after the wider test-case
coverages are done.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The regression-fix in 3.1 for the check of DMA-position validity caused
yet another regression for CA0110.  As usual, this hardware seems working
only with LPIB properly.  Adding the appropriate driver-caps bit to force
LPIB fixes the problem.
Reported-and-tested-by: Andres Freund <andres@anarazel.de>
Cc: <stable@kernel.org> [v3.1]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The 3.1 kernel has a regression for ALC861 codec where no sound output
is heard with the default setup.  It's because the amps in DACs aren't
properly unmuted while the output mixers are assigned only to pins.

This patch fixes the missing initialization of DACs when no mixer is
assigned to them.
Tested-by: Andrea Iob <andrea_iob@yahoo.it>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This was introduced by 'ALSA: control: add support for ENUMERATED user
space controls' which adds a u64 variable that gets cast to a pointer:

sound/core/control.c: In function 'snd_ctl_elem_init_enum_names':
sound/core/control.c:1089: warning: cast to pointer from integer of different size

Cast to uintptr_t before casting to pointer to avoid the warning.
Signed-off-by: Olof Johansson <olof@lixom.net>
[cl: replace long with uintptr_t]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

If the device is unplugged while running, it is possible for a PCM
device to be closed after the disconnect callback has returned.  This
means that kill_stream_urb() and disable_iso_interface() would try to
access already-invalid or freed USB data structures.

The function free_usb_related_resources() was intended to prevent this,
but forgot to clear the affected variables.
Reported-and-tested-by: Olivier Courtay <olivier@courtay.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.33+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has
made for plaforms based on EXYNOS4 SoCs. But since upcoming
Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most
codes in current mach-exynos4, one mach-exynos directory will
be used for them.

This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos)
but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to
avoid changing in driver side.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

MCT recently gained per cpu interrupts, and missed the fact that
ARM has moved to a genirq based implementation.

This patch converts the driver to the new API.

Boot tested on Origen.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

PWM timers use pclk("timers" clk) as parent clk. If this pclk is the
disabled state when PWM driver is probed, then it causes wrong read and
write operation about registers of PWM.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Fix following build error.
arch/arm/plat-samsung/dev-backlight.c: In function 'samsung_bl_set':
arch/arm/plat-samsung/dev-backlight.c:145: error: implicit declaration of function 'kfree'
Signed-off-by: Jonghwan Choi <jhbird.choi@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits)
  ARM: mmp: register internal sram bank
  ARM: mmp: register audio sram bank
  ARM: mmp: add sram allocator
  gpio/samsung: Complain loudly if we don't know the SoC
  ARM: S3C64XX: Fix SoC identification for S3C64xx devices
  ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks
  ARM: S3C24XX: Add devname for hsmmc1 pclk
  ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks
  ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv
  ARM: S3C2443: handle unset armdiv values gracefully
  ARM: S3C2443: Add get_rate operation for clk_armdiv
  ARM: S3C2416: Add comment describing the armdiv/armclk
  ARM: S3C2443: Move clk_arm and clk_armdiv to common code
  ARM: S3C24XX: Add infrastructure to transmit armdiv to common code
  ARM: S3C2416: Add armdiv_mask constant
  ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
  ARM: EXYNOS4: Enable MFC on ORIGEN
  ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450
  ARM: SAMSUNG: Add support s3c2443-adc for S3C2443
  ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX
  ...

* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits)
  ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung
  ARM: SAMSUNG: Cleanup resources by using macro
  ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h
  ARM: S5P: To merge devs.c files to one devs.c
  ARM: S3C64XX: To merge devs.c files to one devs.c
  ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c
  ARM: S5P64X0: Add Power Management support
  ARM: S5P: Make the sleep code common for S5P series SoCs
  ARM: S5P: Make the common S5P PM code conditionally compile
  ARM: SAMSUNG: Move S5P header files to plat-samsung
  ARM: SAMSUNG: Move S3C24XX header files to plat-samsung
  ARM: SAMSUNG: Moving each SoC support header files
  ARM: SAMSUNG: Consolidate plat/pll.h
  ARM: SAMSUNG: Consolidate plat/pwm-clock.h
  ARM: SAMSUNG: Cleanup mach/clkdev.h
  ARM: SAMSUNG: remove sdhci default configuration setup platform helper
  ARM: EXYNOS4: Add FIMC device on SMDKV310 board
  ARM: EXYNOS4: Add header file protection macros
  ARM: EXYNOS4: Add usb ehci device to the SMDKV310
  ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk
  ...

Fix up conflicts in
 - arch/arm/mach-exynos4/{Kconfig,clock.c}
	ARM_CPU_SUSPEND, various random device tables (gah!)
 - drivers/gpio/Makefile
	sa1100 gpio added, samsung gpio drivers merged

Update my email address in MAINTAINERS.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Freezer: Revert 27920651 "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too"
  PM / Freezer: Reimplement wait_event_freezekillable using freezer_do_not_count/freezer_count
  USB: Update last_busy time after autosuspend fails
  PM / Runtime: Automatically retry failed autosuspends
  PM / QoS: Remove redundant check
  PM / OPP: Fix build when CONFIG_PM_OPP is not set
  PM / Runtime: Fix runtime accounting calculation error
  PM / Sleep: Update freezer documentation
  PM / Sleep: Remove unused symbol 'suspend_cpu_hotplug'
  PM / Sleep: Fix race between CPU hotplug and freezer
  ACPI / PM: Add Sony VPCEB17FX to nonvs blacklist

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Convert wm831x driver to watchdog core
  watchdog: s3c2410: convert to use the watchdog framework
  Documentation: watchdog: add guide how to convert drivers to new framework
  watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing
  watchdog: Add WDIOC_GETTIMELEFT ioctl support to w83627 watchdog driver
  watchdog: irq: Remove IRQF_DISABLED
  watchdog: Octeon: Mark octeon_wdt interrupt as IRQF_NO_THREAD
  watchdog: sc520_wdt: Remove unnecessary cast.

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
  [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev
  [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands
  [SCSI] scsi_transport_iscsi: Fix documentation os parameter
  [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support
  [SCSI] libfc: improve flogi retries to avoid lport stuck
  [SCSI] libfc: avoid exchanges collision during lport reset
  [SCSI] libfc: fix checking FC_TYPE_BLS
  [SCSI] edd: Treat "XPRS" host bus type the same as "PCI"
  [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)
  [SCSI] isci: revert bcn filtering
  [SCSI] isci: Fix hard reset timeout conditions.
  [SCSI] isci: No need to manage the pending reset bit on pending requests.
  [SCSI] isci: Remove redundant isci_request.ttype field.
  [SCSI] isci: Fix task management for SMP, SATA and on dev remove.
  [SCSI] isci: No task_done callbacks in error handler paths.
  [SCSI] isci: Handle task request timeouts correctly.
  [SCSI] isci: Fix tag leak in tasks and terminated requests.
  [SCSI] isci: Immediately fail I/O to removed devices.
  [SCSI] isci: Lookup device references through requests in completions.
  [SCSI] ipr: add definitions for additional adapter
  ...

The includes in the pxa2xx_cm_x2xx PCMCIA driver are rather random;
the driver doesn't require anything from these headers except the
cpu_is_xxx() macros which come from another include.

The concern is that it's getting these definitions via mach/system.h,
which is supposed to only be included by arch/arm/kernel/process.c.
As this header is scheduled for cleanup (and elimination) keeping
the status quo will cause build errors.  So lets fix properly and
independent of the future work.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

A mismerge in 43872fa7 (Merge branch 'depends/rmk/gpio' into next/fixes)
causes these build errors:

In file included from arch/arm/mach-pxa/include/mach/gpio.h:30,
                 from arch/arm/include/asm/gpio.h:6,
                 from include/linux/gpio.h:31,
                 from arch/arm/mach-pxa/generic.c:20:
arch/arm/mach-pxa/include/mach/gpio-pxa.h: In function ■__gpio_is_occupied■:
arch/arm/mach-pxa/include/mach/gpio-pxa.h:121: error: invalid operands to binary >> (have ■void *■ and ■unsigned int■)
arch/arm/mach-pxa/include/mach/gpio-pxa.h:122: error: invalid operands to binary & (have ■void *■ and ■int■)
arch/arm/mach-pxa/include/mach/gpio-pxa.h:129: error: invalid operands to binary & (have ■void *■ and ■int■)

So fix them.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fairly large code churn but not much doing with that and the overall
result is a definite win.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Make this driver a user of the watchdog framework and remove now
centrally handled parts. Tested on a mini2440.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver
Jiri Slaby: 28d41f53 broke temperature sensors on a ICH10 chipset

The iTCO_wdt driver disables the SMI. This breaks good working of newer hardware.
The disabling of the SMI by the TCO logic dates back from the i810-tco driver
from Nils Faerber (around 28 July 2000). The reason for this was that some BIOSes
install handlers reset or disable the watchdog timer instead of resetting the system.
The trick to fix this was to disable the SMI (by clearing the SMI_TCO_EN bit of the
SMI_EN register) to prevent this from happening.

This however has strange effects on newer hardware. So we are in a situation that
a fix for broken old hardware affects newer hardware.

The correct solution is to make this fix an option (with the new module parameter:
turn_SMI_watchdog_clear_off) so that the default behaviour is the unfixed version.

the next patch will be to move this in the start and stop functions of the driver
and to add a new module parameter for the global_smi_en bit and to get rid of the
vendor_support code.

This fix can have an effect on old (typical ICH & ICH2 chipsets) motherboards that
have a broken BIOS implementation concerning TCO logic. In these case the module
parameter turn_SMI_watchdog_clear_off=1 will need to be added.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add WDIOC_GETTIMELEFT ioctl allowing you to check how much time is left
on the watchdog counter before a reset occurs.

Signed-off-by: Greg Lee <glee [at] swspec.com>
Signed-off-by: Padraig Brady <P@draigbrady.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@google.com>

This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This is to exclude it from force threading to allow RT patch set to work.

The watchdog timers are per-CPU and the addresses of register that reset
the timer are calculated based on the current CPU.  Therefore we cannot
allow it to run on a thread on a different CPU.  Also we only do a
single register write, which is much faster than scheduling a handler
thread.

And while on this line remove IRQF_DISABLED as this flag is a NOP.

Signed-off-by: Venkat Subbiah<venkat.subbiah@cavium.com>
Acked-by: David Daney<david.daney@cavium.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

When breaking apart the DaVinci GPIO files I accidentally
marked it non-complex while it is indeed complex.
Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This reverts commit 4bd0fe1c.

This implementation can introduce a problem and 'ARM: SMP: fix
per cpu timer setup before the cpu is marked online' patch can
solve the cpu_oneline vs. cpu_active problem so that should be
reverted.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fix:

WARNING: vmlinux.o(.text+0x1a820): Section mismatch in reference from the function eseries_register_clks() to the function .init.text:clkdev_add_table()
The function eseries_register_clks() references
the function __init clkdev_add_table().
This is often because eseries_register_clks lacks a __init
annotation or the annotation of clkdev_add_table is wrong.

by adding the __init annotation to eseries_register_clks() - this
function is only called from other __init-marked functions.  While
we're here, mark it static as it's only called from within eseries.c.
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fix:

ERROR: "pxa2xx_configure_sockets" [drivers/pcmcia/pxa2xx_lubbock_cs.ko] undefined!

by exporting the required function.
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The mark of conflict should be removed.

This happened at the commit fba95699 ("Merge branch 'next' of
git://git.infradead.org/users/vkoul/slave-dma")
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ I always check the conflict resolution with "git diff" before I add
  the result, but I clearly missed that this time, and didn't notice the
  second conflict in that file after having fixed the first one.
  Oops, my bad.      - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

No one in their right mind would expect statfs() to not work on a
automounter managed mount point. Fix it.

[ I'm not sure about the "no one in their right mind" part.  It's not
  mounted, and you didn't ask for it to be mounted.  But nobody will
  really care, and this probably makes it match previous semantics, so..
      - Linus ]

This mirrors the fix made to the quota code in 815d405c.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits)
  dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle
  dmaengine/ep93xx_dma: add module.h include
  pch_dma: Reduce wasting memory
  pch_dma: Fix suspend issue
  dma/timberdale: free_irq() on an error path
  dma: shdma: transfer based runtime PM
  dmaengine: shdma: protect against the IRQ handler
  dmaengine i.MX DMA/SDMA: add missing include of linux/module.h
  dmaengine: delete redundant chan_id and chancnt initialization in dma drivers
  dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool
  dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers
  serial: sh-sci: don't filter on DMA device, use only channel ID
  ARM: SAMSUNG: Remove Samsung specific enum type for dma direction
  ASoC: Samsung: Update DMA interface
  spi/s3c64xx: Merge dma control code
  spi/s3c64xx: Add support DMA engine API
  ARM: SAMSUNG: Remove S3C-PL330-DMA driver
  ARM: S5P64X0: Use generic DMA PL330 driver
  ARM: S5PC100: Use generic DMA PL330 driver
  ARM: S5PV210: Use generic DMA PL330 driver
  ...

Fix up fairly trivial conflicts in
 - arch/arm/mach-exynos4/{Kconfig,clock.c}
 - arch/arm/mach-s5p64x0/dma.c