- 17 Oct, 2015 40 commits
-
-
Ioana Ciornei authored
Convert uint32_t to u32 and uint64_t to u64 in order to follow the kernel best practice Signed-off-by:
Ioana Ciornei <ciorneiioana@gmail.com> Reviewed-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ioana Ciornei authored
Simplify return flow ad7150_write_event_params in order to reduce code length. Since i2c_smbus_write_word_data only returns a negative value or 0 the change is safe. This patch fixes the following coccicheck warning: drivers/staging/iio/cdc/ad7150.c:182:2-5: WARNING: end returns can be simpified if negative or 0 value Signed-off-by:
-
Shivani Bhardwaj authored
Explicit type conversion is not required to remove it. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
Shivani Bhardwaj <shivanib134@gmail.com> Signed-off-by:
-
Shivani Bhardwaj authored
The variable inst is a __u32 type and hence the function used should be simple_strtoul. Semantic patch used: @@ typedef __u32; __u32 e; @@ e = - simple_strtol + simple_strtoul (...) Signed-off-by:
-
Shivani Bhardwaj authored
The variable rc is supposed to hold the value returned by function kstrtoul which can either be 0, -EINVAL (-22) or -ERANGE (-34). Therefore, the check must be performed on rc instead of val for error values. Also, rc can never be greater than 0. Signed-off-by:
-
Shraddha Barke authored
Remove macro OBD_SLAB_FREE_RTN0 since it is defined but not used Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
-
Shivani Bhardwaj authored
struct it is already NULL tested before so, it should be removed from the if test expression. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Shivani Bhardwaj authored
Variable op_data is already tested for NULL value and therefore any further checks should be removed. Semantic patch used: @@ expression E;@@ if(E==NULL) {... return ...;} - if(E){ ... - } Signed-off-by: -
Shraddha Barke authored
Remove macro OBD_CHECK_MD_OP since it is defined but not used Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Shraddha Barke authored
void pointers do not need to be cast to other pointer types. Semantic patch used to find this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Shraddha Barke authored
void pointers do not need to be cast to other pointer types. The semantic patch used to find this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Shraddha Barke authored
void pointers do not need to be cast to other pointer types. The semantic patch used to find this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Amitoj Kaur Chawla authored
The semantic patch used to find this is: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Amitoj Kaur Chawla authored
The semantic patch used to find this is: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Amitoj Kaur Chawla authored
The semantic patch used to find this is: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Amitoj Kaur Chawla authored
The semantic patch used to find this is: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Amitoj Kaur Chawla authored
The semantic patch used to find this is: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Amitoj Kaur Chawla authored
The semantic patch used to find this is: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by:
-
Shivani Bhardwaj authored
The variable frame_authorized is declared and mentioned in the code but is not used anywhere so, it should be removed. Also, two case statements are merged by removing an extra break. Semantic patch used: @@ type T; identifier i; constant C; position p != e.p; @@ - T i@p; <+... when != i - i = C; ...+> Signed-off-by:
-
Shivani Bhardwaj authored
Remove NULL check on a variable as it is already preceded by one. Signed-off-by:
-
Punit Vara authored
This patch is to the rtl871x_ioctl_linux.c file that fixes up following warnings reported by checkpatch.pl : -Block comments use * on subsequent lines -Block comments use a trailing */ on a separate line Signed-off-by:
Punit Vara <punitvara@gmail.com> Signed-off-by:
-
Punit Vara authored
This patch is to the rtl871x_ioctl_linux.c file that fixes up following warning reported by checkpatch.pl : -Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() bssid and pnetwork->network.MacAddress both are 6 byte array which aligned with u16 Signed-off-by:
-
Punit Vara authored
This patch is to the rtl871x_ioctl_linux.c that fixes up following warning by checkpatch.pl: -Prefer eth_broadcast_addr() over memset() Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Shivani Bhardwaj authored
Explicit type conversion is not required and should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Shivani Bhardwaj authored
Explicit typecasting is not required and should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Shivani Bhardwaj authored
Explicit typecasting of variables is not required and should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Shivani Bhardwaj authored
Typecasting should be removed from variables as it is not required. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Shivani Bhardwaj authored
Explicit type conversions are not required so, remove them. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Shivani Bhardwaj authored
Explicit type conversions are not required and so, they should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The problem was found using coccinelle semantic patch and further opportunities were identified by hand. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Shivani Bhardwaj authored
Logical and-ing of a struct and its member should be replaced by the member only as the struct has already been NULL tested before. Signed-off-by:
-
Shivani Bhardwaj authored
A variable is initialized and then assigned values in the code but is never used and therefore, should be removed. Semantic patch used: @@ type T; identifier i; constant C; position p != e.p; @@ - T i@p; <+... when != i - i = C; ...+> Signed-off-by:
-
Shivani Bhardwaj authored
The variable ret is only declared and initialized to 0, but never referenced, so remove it. Signed-off-by:
-
Mike Rapoport authored
The clock divisor calculations in setMasterClock and setMemoryClock unnecessaryly cast unsigned int to unsigned int. Removing the casting. Signed-off-by:
Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by:
-
Mike Rapoport authored
The getChipClock is used to detect MXCLK frequency. Make it's name reflect what the function is actually doing. Signed-off-by:
-
