- 12 May, 2011 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix ioctl SNAPSHOT_S2RAM PM / Hibernate: Make snapshot_release() restore GFP mask PM: Fix warning in pm_restrict_gfp_mask() during SNAPSHOT_S2RAM ioctl
-
Mel Gorman authored
include/linux/gfp.h and include/trace/events/gfpflags.h are out of sync. When tracing is enabled, certain flags are not recognised and the text output is less useful as a result. Add the missing flags. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Testing the shmem_swaplist replacements for igrab() revealed another bug: writes to /dev/loop0 on a tmpfs file which fills its filesystem were sometimes failing with "Buffer I/O error"s. These came from ENOSPC failures of shmem_getpage(), when racing with swapoff: the same could happen when racing with another shmem_getpage(), pulling the page in from swap in between our find_lock_page() and our taking the info->lock (though not in the single-threaded loop case). This is unacceptable, and surprising that I've not noticed it before: it dates back many years, but (presumably) was made a lot easier to reproduce in 2.6.36, which sited a page preallocation in the race window. Fix it by rechecking the page cache before settling on an ENOSPC error. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
The use of igrab() in swapoff's shmem_unuse_inode() is just as vulnerable to umount as that in shmem_writepage(). Fix this instance by extending the protection of shmem_swaplist_mutex right across shmem_unuse_inode(): while it's on the list, the inode cannot be evicted (and the filesystem cannot be unmounted) without shmem_evict_inode() taking that mutex to remove it from the list. But since shmem_writepage() might take that mutex, we should avoid making memory allocations or memcg charges while holding it: prepare them at the outer level in shmem_unuse(). When mem_cgroup_cache_charge() was originally placed, we didn't know until that point that the page from swap was actually a shmem page; but nowadays it's noted in the swap_map, so we're safe to charge upfront. For the radix_tree, do as is done in shmem_getpage(): preload upfront, but don't pin to the cpu; so we make a habit of refreshing the node pool, but might dip into GFP_NOWAIT reserves on occasion if subsequently preempted. With the allocation and charge moved out from shmem_unuse_inode(), we can also hold index map and info->lock over from finding the entry. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98 "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andi Kleen authored
Commit dde79e00 ("page_cgroup: reduce allocation overhead for page_cgroup array for CONFIG_SPARSEMEM") added a regression that the memory cgroup data structures all end up in node 0 because the first attempt at allocating them would not pass in a node hint. Since the initialization runs on CPU #0 it would all end up node 0. This is a problem on large memory systems, where node 0 would lose a lot of memory. Change the alloc_pages_exact() to alloc_pages_exact_nid(). This will still fall back to other nodes if not enough memory is available. [ RED-PEN: right now it would fall back first before trying vmalloc_node. Probably not the best strategy ... But I left it like that for now. ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Reported-by: Doug Nelson Cc: David Rientjes <rientjes@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andi Kleen authored
Add a alloc_pages_exact_nid() that allocates on a specific node. The naming is quite broken, but fixing that would need a larger renaming action. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: tweak comment] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Harry Wei authored
Take alphabetical orders for MAINTAINERS file. Signed-off-by: Harry Wei <harryxiyou@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yinghai Lu authored
Stefan found nobootmem does not work on his system that has only 8M of RAM. This causes an early panic: BIOS-provided physical RAM map: BIOS-88: 0000000000000000 - 000000000009f000 (usable) BIOS-88: 0000000000100000 - 0000000000840000 (usable) bootconsole [earlyser0] enabled Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI not present or invalid. last_pfn = 0x840 max_arch_pfn = 0x100000 init_memory_mapping: 0000000000000000-0000000000840000 8MB LOWMEM available. mapped low ram: 0 - 00840000 low ram: 0 - 00840000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x00000840 BUG: Int 6: CR2 (null) EDI c034663c ESI (null) EBP c0329f38 ESP c0329ef4 EBX c0346380 EDX 00000006 ECX ffffffff EAX fffffff4 err (null) EIP c0353191 CS c0320060 flg 00010082 Stack: (null) c030c533 000007cd (null) c030c533 00000001 (null) (null) 00000003 0000083f 00000018 00000002 00000002 c0329f6c c03534d6 (null) (null) 00000100 00000840 (null) c0329f64 00000001 00001000 (null) Pid: 0, comm: swapper Not tainted 2.6.36 #5 Call Trace: [<c02e3707>] ? 0xc02e3707 [<c035e6e5>] 0xc035e6e5 [<c0353191>] ? 0xc0353191 [<c03534d6>] 0xc03534d6 [<c034f1cd>] 0xc034f1cd [<c034a824>] 0xc034a824 [<c03513cb>] ? 0xc03513cb [<c0349432>] 0xc0349432 [<c0349066>] 0xc0349066 It turns out that we should ignore the low limit of 16M. Use alloc_bootmem_node_nopanic() in this case. [akpm@linux-foundation.org: less mess] Signed-off-by: Yinghai LU <yinghai@kernel.org> Reported-by: Stefan Hellermann <stefan@the2masters.de> Tested-by: Stefan Hellermann <stefan@the2masters.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
The lru_deactivate_fn should not move page which in on unevictable lru into inactive list. Otherwise, we can meet BUG when we use isolate_lru_pages as __isolate_lru_page could return -EINVAL. Reported-by: Ying Han <yinghan@google.com> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel<riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Dooks authored
The driver is not balancing set_irq and disable_irq_wake() calls, so ensure that it keeps track of whether the wake is enabled. The fixes the following error on S3C6410 devices: WARNING: at kernel/irq/manage.c:382 set_irq_wake+0x84/0xec() Unbalanced IRQ 92 wake disable Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 11 May, 2011 5 commits
-
-
Rafael J. Wysocki authored
The SNAPSHOT_S2RAM ioctl used for implementing the feature allowing one to suspend to RAM after creating a hibernation image is currently broken, because it doesn't clear the "ready" flag in the struct snapshot_data object handled by it. As a result, the SNAPSHOT_UNFREEZE doesn't work correctly after SNAPSHOT_S2RAM has returned and the user space hibernate task cannot thaw the other processes as appropriate. Make SNAPSHOT_S2RAM clear data->ready to fix this problem. Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
Rafael J. Wysocki authored
If the process using the hibernate user space interface closes /dev/snapshot after creating a hibernation image without thawing tasks, snapshot_release() should call pm_restore_gfp_mask() to restore the GFP mask used before the creation of the image. Make that happen. Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
Rafael J. Wysocki authored
A warning is printed by pm_restrict_gfp_mask() while the SNAPSHOT_S2RAM ioctl is being executed after creating a hibernation image, because pm_restrict_gfp_mask() has been called once already before the image creation and suspend_devices_and_enter() calls it once again. This happens after commit 452aa699 (mm/pm: force GFP_NOIO during suspend/hibernation and resume). To avoid this issue, move pm_restrict_gfp_mask() and pm_restore_gfp_mask() from suspend_devices_and_enter() to its caller in kernel/power/suspend.c. Reported-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) slcan: fix ldisc->open retval net/usb: mark LG VL600 LTE modem ethernet interface as WWAN xfrm: Don't allow esn with disabled anti replay detection xfrm: Assign the inner mode output function to the dst entry net: dev_close() should check IFF_UP vlan: fix GVRP at dismantle time netfilter: revert a2361c87 netfilter: IPv6: fix DSCP mangle code netfilter: IPv6: initialize TOS field in REJECT target module IPVS: init and cleanup restructuring IPVS: Change of socket usage to enable name space exit. netfilter: ebtables: only call xt_compat_add_offset once per rule netfilter: fix ebtables compat support netfilter: ctnetlink: fix timestamp support for new conntracks pch_gbe: support ML7223 IOH PCH_GbE : Fixed the issue of checksum judgment PCH_GbE : Fixed the issue of collision detection NET: slip, fix ldisc->open retval be2net: Fixed bugs related to PVID. ehea: fix wrongly reported speed and port ...
-
David Rientjes authored
This reverts commit 4a5fa359, which did not allow SLUB to be used on architectures that use DISCONTIGMEM without compiling NUMA support without CONFIG_BROKEN also set. The slub panic that it was intended to prevent is addressed by d9b41e0b ("[PARISC] set memory ranges in N_NORMAL_MEMORY when onlined") on parisc so there is no further slub issues with such a configuration. The reverts allows SLUB now to be used on such architectures since there haven't been any reports of additional errors. Cc: James Bottomley <James.Bottomley@suse.de> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 10 May, 2011 24 commits
-
-
-
Oliver Hartkopp authored
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Williams authored
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
Unlike the standard case, disabled anti replay detection needs some nontrivial extra treatment on ESN. RFC 4303 states: Note: If a receiver chooses to not enable anti-replay for an SA, then the receiver SHOULD NOT negotiate ESN in an SA management protocol. Use of ESN creates a need for the receiver to manage the anti-replay window (in order to determine the correct value for the high-order bits of the ESN, which are employed in the ICV computation), which is generally contrary to the notion of disabling anti-replay for an SA. So return an error if an ESN state with disabled anti replay detection is inserted for now and add the extra treatment later if we need it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit 44345724 (factorize sync-rcu call in unregister_netdevice_many) mistakenly removed one test from dev_close() Following actions trigger a BUG : modprobe bonding modprobe dummy ifconfig bond0 up ifenslave bond0 dummy0 rmmod dummy dev_close() must not close a non IFF_UP device. With help from Frank Blaschka and Einar EL Lueck Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by: Einar EL Lueck <ELELUECK@de.ibm.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on ip link set eth2.103 up rmmod tg3 # driver providing eth2 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] PGD 11d251067 PUD 11b9e0067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex CPU 0 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables] Pid: 11494, comm: rmmod Tainted: G W 2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6 RIP: 0010:[<ffffffffa0030c9e>] [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] RSP: 0018:ffff88007a19bae8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0) Stack: ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48 ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6 ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7 Call Trace: [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q] [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q] [<ffffffff8137e427>] __dev_close_many+0x87/0xe0 [<ffffffff8137e507>] dev_close_many+0x87/0x110 [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240 [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60 [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q] [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0 [<ffffffff81479d03>] notifier_call_chain+0x53/0x80 [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20 [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60 [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240 [<ffffffff8137e85f>] rollback_registered+0x2f/0x40 [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90 [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30 [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3] We should call vlan_gvrp_request_leave() from unregister_vlan_dev(), not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant() is called right after unregister_netdevice_queue(). In batch mode, unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (28 commits) MIPS: Alchemy: fix xxs1500 build error MIPS: Invalidate old TLB mappings when updating huge page PTEs. MIPS: Hibernation: Fixes for PAGE_SIZE >= 64kb MIPS: JZ4740: Set one-shot feature flag for the clockevent MIPS: JZ4740: Export symbols to the watchdog driver module MIPS: JZ4740: Fix GCC 4.6.0 build error. MIPS: Audit: Fix success success argument pass to audit_syscall_exit MIPS: Fix calc_vmlinuz_load_addr build warnings. MIPS: Alchemy: Fix GCC 4.6.0 build error. MIPS: Document former use of timerfd(2) syscall number. MIPS: IP27: Fix GCC 4.6.0 build error. MIPS: IP27: Fix GCC 4.6.0 build error. MIPS: bcm63xx: Fix header_crc comment in bcm963xx_tag.h MIPS: Octeon: Guard the Kconfig body with CPU_CAVIUM_OCTEON MIPS: Octeon: Cleanup Kconfig IRQ_CPU* symbols. MIPS: Rename .data..mostly and properly handle it in linker script MIPS: MSP: Fix build error MIPS: MSP71xx: Fix typo in msp_per_irq_controller MIPS: Loongson: Fix GCC 2.6.0 build error. MIPS: Jazz: Fix GCC 4.6.0 build error ...
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix race condition in AIL push trigger xfs: make AIL target updates and compares 32bit safe. xfs: always push the AIL to the target xfs: exit AIL push work correctly when AIL is empty xfs: ensure reclaim cursor is reset correctly at end of AG
-
Manuel Lauss authored
This fixes: alchemy/xxs1500/init.c: In function 'prom_init': alchemy/xxs1500/init.c:57:17: error: ignoring return value of 'kstrtoul', declared with attribute warn_unused_result Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2340/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Without this, stale Icache or TLB entries may be used. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org https://patchwork.linux-mips.org/patch/2318/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
PAGE_SIZE >= 64kb (1 << 16) is too big to be the immediate of the addiu/daddiu instruction, so, use addu/daddu instruction instead. The following compiling error is fixed: AS arch/mips/power/hibernate.o arch/mips/power/hibernate.S: Assembler messages: arch/mips/power/hibernate.S:38: Error: expression out of range make[2]: *** [arch/mips/power/hibernate.o] Error 1 make[1]: *** [arch/mips/power] Error 2 Reported-by: Roman Mamedov <rm@romanrm.ru> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2313/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Lars-Peter Clausen authored
The code for supporting one-shot mode for the clockevent is already there, only the feature flag was not set. Setting the one-shot flag allows the kernel to run in tickless mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2261/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
MODPOST 356 modules ERROR: "jz4740_timer_disable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefine d! ERROR: "jz4740_timer_enable_watchdog" [drivers/watchdog/jz4740_wdt.ko] undefined ! make[1]: *** [__modpost] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
CC arch/mips/jz4740/dma.o arch/mips/jz4740/dma.c: In function 'jz4740_dma_chan_irq': arch/mips/jz4740/dma.c:245:11: error: variable 'status' set but not used [-Werro r=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
HOSTCC arch/mips/boot/compressed/calc_vmlinuz_load_addr arch/mips/boot/compressed/calc_vmlinuz_load_addr.c: In function 'main': arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:35:2: warning: format '%llx' expects type 'long long unsigned int *', but argument 3 has type 'uint64_t *' arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:54:2: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t' Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
CC arch/mips/alchemy/devboards/db1x00/board_setup.o arch/mips/alchemy/devboards/db1x00/board_setup.c: In function 'board_setup': arch/mips/alchemy/devboards/db1x00/board_setup.c:130:6: error: variable 'pin_func' set but not used [-Werror=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
CC arch/mips/sgi-ip27/ip27-hubio.o arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map': arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
CC arch/mips/sgi-ip27/ip27-hubio.o arch/mips/sgi-ip27/ip27-hubio.c: In function 'hub_pio_map': arch/mips/sgi-ip27/ip27-hubio.c:32:20: error: variable 'junk' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Jonas Gorski authored
The CRC32 actually includes the tag_version. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2275/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Instead of making each Octeon specific option depend on CPU_CAVIUM_OCTEON, gate the body of the entire file with CPU_CAVIUM_OCTEON. With this change, CAVIUM_OCTEON_SPECIFIC_OPTIONS becomes useless, so get rid of it as well. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2091/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Octeon doesn't use IRQ_CPU, so don't select it. IRQ_CPU_OCTEON is a completely unused symbol, remove it completely. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2086/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-