- 23 Jan, 2015 24 commits
-
-
Jens Freimann authored
Setting inti->type again is unnecessary here, so let's remove this. Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Jens Freimann authored
When we convert interrupt data from struct kvm_s390_interrupt to struct kvm_s390_irq we need to check the data in the input parameter not the output parameter. Acked-by:
-
David Hildenbrand authored
We have to delete the allocated interrupt info if __inject_vm() fails. Otherwise user space can keep flooding kvm with floating interrupts and provoke more and more memory leaks. Reported-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
-
Tony Krowiak authored
Created new KVM device attributes for indicating whether the AES and DES/TDES protected key functions are available for programs running on the KVM guest. The attributes are used to set up the controls in the guest SIE block that specify whether programs running on the guest will be given access to the protected key functions available on the s390 hardware. Signed-off-by:
Tony Krowiak <akrowiak@linux.vnet.ibm.com> Reviewed-by:
Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by:
-
Jason J. Herne authored
Provide controls for setting/getting the guest TOD clock based on the VM attribute interface. Provide TOD and TOD_HIGH vm attributes on s390 for managing guest Time Of Day clock value. TOD_HIGH is presently always set to 0. In the future it will contain a high order expansion of the tod clock value after it overflows the 64-bits of the TOD. Signed-off-by:
Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by:
-
Jens Freimann authored
When injecting SIGP set prefix or a machine check, we trace the values in our per-vcpu local_int data structure instead of the parameters passed to the function. Fix this by changing the trace statement to use the correct values. Reviewed-by:
-
Jens Freimann authored
Currently we are always setting the wrong bit in the bitmap for pending emergency signals. Instead of using emerg.code from the passed in irq parameter, we use the value in our per-vcpu local_int structure, which is always zero. That means all emergency signals will have address 0 as parameter. If two CPUs send a SIGP to the same target, one might be lost. Let's fix this by using the value from the parameter and also trace the correct value. Reviewed-by:
-
Thomas Huth authored
The handler for MVPG partial execution interception does not take the current CPU addressing mode into account yet, so addresses are always treated as 64-bit addresses. For correct behaviour, we should properly handle 24-bit and 31-bit addresses, too. Since MVPG is defined to work with logical addresses, we can simply use guest_translate_address() to achieve the required behaviour (since DAT is disabled here, guest_translate_address() skips the MMU translation and only translates the address via kvm_s390_logical_to_effective() and kvm_s390_real_to_abs(), which is exactly what we want here). Signed-off-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by:
-
Christian Borntraeger authored
The kvm mutex was (probably) used to protect against cpu hotplug. The current code no longer needs to protect against that, as we only rely on CPU data structures that are guaranteed to be available if we can access the CPU. (e.g. vcpu_create will put the cpu in the array AFTER the cpu is ready). Signed-off-by:
-
David Hildenbrand authored
Most SIGP orders are handled partially in kernel and partially in user space. In order to: - Get a correct SIGP SET PREFIX handler that informs user space - Avoid race conditions between concurrently executed SIGP orders - Serialize SIGP orders per VCPU We need to handle all "slow" SIGP orders in user space. The remaining ones to be handled completely in kernel are: - SENSE - SENSE RUNNING - EXTERNAL CALL - EMERGENCY SIGNAL - CONDITIONAL EMERGENCY SIGNAL According to the PoP, they have to be fast. They can be executed without conflicting to the actions of other pending/concurrently executing orders (e.g. STOP vs. START). This patch introduces a new capability that will - when enabled - forward all but the mentioned SIGP orders to user space. The instruction counters in the kernel are still updated. Reviewed-by:
-
David Hildenbrand authored
We need a way to clear the async pfault queue from user space (e.g. for resets and SIGP SET ARCHITECTURE). This patch simply clears the queue as soon as user space sets the invalid pfault token. The definition of the invalid token is moved to uapi. Signed-off-by:
-
David Hildenbrand authored
Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by:
-
David Hildenbrand authored
This patch introduces the infrastructure to check whether the SIGP Interpretation Facility is installed on all VCPUs in the configuration. Signed-off-by:
-
David Hildenbrand authored
This patch cleanes up the the SIGP SET PREFIX code. A SIGP SET PREFIX irq may only be injected if the target vcpu is stopped. Let's move the checking code into the injection code and return -EBUSY if the target vcpu is not stopped. Reviewed-by:
-
David Hildenbrand authored
As a SIGP STOP is an interrupt with the least priority, it may only result in stop of the vcpu when no other interrupts are left pending. To detect whether a non-stop irq is pending, we need a way to mask out stop irqs from the general kvm_cpu_has_interrupt() function. For this reason, the existing function (with an outdated name) is replaced by kvm_s390_vcpu_has_irq() which allows to mask out pending stop irqs. Acked-by:
-
David Hildenbrand authored
This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by:
-
David Hildenbrand authored
In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by:
-
David Hildenbrand authored
Patch 0759d068 ("KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block") changed the way pending guest clock comparator interrupts are detected. It was assumed that as soon as the hrtimer wakes up, the condition for the guest ckc is satisfied. This is however only true as long as adjclock() doesn't speed up the monotonic clock. Reason is that the hrtimer is based on CLOCK_MONOTONIC, the guest clock comparator detection is based on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the TOD clock, the hrtimer wakes the target VCPU up too early and the target VCPU will not detect any pending interrupts, therefore going back to sleep. It will never be woken up again because the hrtimer has finished. The VCPU is stuck. As a quick fix, we have to forward the hrtimer until the guest clock comparator is really due, to guarantee properly timed wake ups. As the hrtimer callback might be triggered on another cpu, we have to make sure that the timer is really stopped and not currently executing the callback on another cpu. This can happen if the vcpu thread is scheduled onto another physical cpu, but the timer base is not migrated. So lets use hrtimer_cancel instead of try_to_cancel. A proper fix might be to introduce a RAW based hrtimer. Reported-by:
-
David Hildenbrand authored
The hrtimer that handles the wait with enabled timer interrupts should not be disturbed by changes of the host time. This patch changes our hrtimer to be based on a monotonic clock. Signed-off-by:
-
David Hildenbrand authored
We sometimes get an underflow for the sleep duration, which most likely won't result in the short sleep time we wanted. So let's check for sleep duration underflows and directly continue to run the guest if we get one. Acked-by:
-
Dominik Dingel authored
With commit c6c956b8 ("KVM: s390/mm: support gmap page tables with less than 5 levels") we are able to define a limit for the guest memory size. As we round up the guest size in respect to the levels of page tables we get to guest limits of: 2048 MB, 4096 GB, 8192 TB and 16384 PB. We currently limit the guest size to 16 TB, which means we end up creating a page table structure supporting guest sizes up to 8192 TB. This patch introduces an interface that allows userspace to tune this limit. This may bring performance improvements for small guests. Signed-off-by:
-
Dominik Dingel authored
As we will allow in a later patch to recreate gmaps with new limits, we need to make sure that vcpus get their reference for that gmap after they increased the online_vcpu counter, so there is no possible race. While we are doing this, we also can simplify the vcpu_init function, by moving ucontrol specifics to an own function. That way we also start now setting the kvm_valid_regs for the ucontrol path. Reviewed-by:
-
Christian Borntraeger authored
sparse rightfully complains about warning: symbol '__inject_extcall' was not declared. Should it be static? Signed-off-by: -
Dominik Dingel authored
The return value of kvm_arch_vcpu_postcreate is not checked in its caller. This is okay, because only x86 provides vcpu_postcreate right now and it could only fail if vcpu_load failed. But that is not possible during KVM_CREATE_VCPU (kvm_arch_vcpu_load is void, too), so just get rid of the unchecked return value. Signed-off-by:
-
- 08 Jan, 2015 16 commits
-
-
Nicholas Krause authored
Adds a function kvm_vcpu_set_pending_timer instead of calling kvm_make_request in lapic.c. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Nadav Amit authored
When access to descriptor in LDT/GDT wraparound outside long-mode, the address of the descriptor should be truncated to 32-bit. Citing Intel SDM 2.1.1.1 "Global and Local Descriptor Tables in IA-32e Mode": "GDTR and LDTR registers are expanded to 64-bits wide in both IA-32e sub-modes (64-bit mode and compatibility mode)." So in other cases, we need to truncate. Creating new function to return a pointer to descriptor table to avoid too much code duplication. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> [Wrap 64-bit check with #ifdef CONFIG_X86_64, to avoid a "right shift count >= width of type" warning and consequent undefined behavior. - Paolo] Signed-off-by:
-
Nadav Amit authored
When segment is loaded, the segment access bit is set unconditionally. In fact, it should be set conditionally, based on whether the segment had the accessed bit set before. In addition, it can improve performance. Signed-off-by:
-
Nadav Amit authored
According to Intel SDM: "If the ESP register is used as a base register for addressing a destination operand in memory, the POP instruction computes the effective address of the operand after it increments the ESP register." The current emulation does not behave so. The fix required to waste another of the precious instruction flags and to check the flag in decode_modrm. Signed-off-by:
-
Nadav Amit authored
Currently, if em_call_far fails it returns success instead of the resulting error-code. Fix it. Signed-off-by:
-
Nadav Amit authored
The KVM emulator does not emulate JMP and CALL that target a call gate or a task gate. This patch does not try to implement these scenario as they are presumably rare; yet it returns X86EMUL_UNHANDLEABLE error in such cases instead of generating an exception. Signed-off-by:
-
Nadav Amit authored
Since the operand size of fnstcw and fnstsw is updated during the execution, the emulation may cause spurious exceptions as it reads the memory beforehand. Marking these instructions as Mov (since the previous value is ignored) and DstMem16 to simplify the setting of operand size. Signed-off-by:
-
Nadav Amit authored
Although pop sreg updates RSP according to the operand size, only 2 bytes are read. The current behavior may result in incorrect #GP or #PF exceptions. Signed-off-by:
-
Paolo Bonzini authored
This makes the direction of the conditions consistent with code that is already using WARN_ON. Signed-off-by: -
Paolo Bonzini authored
Because ASSERT is just a printk, these would oops right away. The assertion thus hardly adds anything. Signed-off-by: -
Paolo Bonzini authored
The initialization function in mmu.c can always use walk_mmu, which is known to be vcpu->arch.mmu. Only init_kvm_nested_mmu is used to initialize vcpu->arch.nested_mmu. Signed-off-by: -
Paolo Bonzini authored
This is, pedantically, not valid C. It also looks weird. Signed-off-by: -
Marcelo Tosatti authored
Add tracepoint to wait_lapic_expire. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> [Remind reader if early or late. - Paolo] Signed-off-by:
-
Marcelo Tosatti authored
For the hrtimer which emulates the tscdeadline timer in the guest, add an option to advance expiration, and busy spin on VM-entry waiting for the actual expiration time to elapse. This allows achieving low latencies in cyclictest (or any scenario which requires strict timing regarding timer expiration). Reduces average cyclictest latency from 12us to 8us on Core i5 desktop. Note: this option requires tuning to find the appropriate value for a particular hardware/guest combination. One method is to measure the average delay between apic_timer_fn and VM-entry. Another method is to start with 1000ns, and increase the value in say 500ns increments until avg cyclictest numbers stop decreasing. Signed-off-by:
-
Marcelo Tosatti authored
kvm_x86_ops->test_posted_interrupt() returns true/false depending whether 'vector' is set. Next patch makes use of this interface. Signed-off-by:
-
Tiejun Chen authored
In most cases calling hwapic_isr_update(), we always check if kvm_apic_vid_enabled() == 1, but actually, kvm_apic_vid_enabled() -> kvm_x86_ops->vm_has_apicv() -> vmx_vm_has_apicv() or '0' in svm case -> return enable_apicv && irqchip_in_kernel(kvm) So its a little cost to recall vmx_vm_has_apicv() inside hwapic_isr_update(), here just NULL out hwapic_isr_update() in case of !enable_apicv inside hardware_setup() then make all related stuffs follow this. Note we don't check this under that condition of irqchip_in_kernel() since we should make sure definitely any caller don't work without in-kernel irqchip. Signed-off-by:Tiejun Chen <tiejun.chen@intel.com> Signed-off-by:
-
