- 06 Jan, 2010 2 commits
-
-
Dmitry Torokhov authored
We need to first unregister input device and only then cancel event work since events can arrive (and cause event work to get scheduled again) until input_unregister_device() returns. Signed-off-by:Dmitry Torokhov <dtor@mail.ru>
-
Eric W. Biederman authored
sysfs_remove_group() waits for sysfs attributes to be removed, therefore we do not need to worry about driver-specific attributes being accessed after driver has been detached from the device. In fact, attempts to take serio->drv_mutex in attribute methods may lead to the following deadlock: sysfs_read_file() fill_read_buffer() sysfs_get_active_two() psmouse_attr_show_helper() serio_pin_driver() serio_disconnect_driver() mutex_lock(&serio->drv_mutex); <--------> mutex_lock(&serio_drv_mutex); psmouse_disconnect() sysfs_remove_group(... psmouse_attr_group); .... sysfs_deactivate(); wait_for_completion(); Fix this by removing calls to serio_[un]pin_driver() and functions themselves and using driver-private mutexes to serialize access to attribute's set() methods that may change device state. Signed-off-by:Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
- 02 Jan, 2010 1 commit
-
-
Roel Kluin authored
This always evaluates to true. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
- 30 Dec, 2009 6 commits
-
-
Dmitry Torokhov authored
We need to wait for the command to disable FF effects to complete before continuing with closing the device. Tested-by:
Johannes Ebke <johannes.ebke@physik.uni-muenchen.de> Signed-off-by:
-
Felipe Balbi authored
Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Felipe Balbi authored
Signed-off-by:
-
Dmitry Torokhov authored
Lifebook protocol can only be activated if we find known DMI signature. It is useles without DMI. Reported-by:
Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by:
-
Rakib Mullick authored
This should fix the following compile warning: drivers/input/misc/wistron_btns.c:1331:5: warning: "CONFIG_PM" is not defined Signed-off-by:
-
René Bolldorf authored
The variable 'dev' is unused in function 'hgpk_register'. Signed-off-by:
-
- 25 Dec, 2009 7 commits
-
-
Dmitry Torokhov authored
On certain boards not all GPIOs may be used as wakeup sources, in which case some of enable_irq_wake() calls will fail. On resume calling disable_irq_wake() will warn about unbalanced IRQ wake disable. Solve this by checking whether enable_irq_wake() succeeded or not and no not call disable_irq_wake() for these GPIOs/IRQs that have not been enabled. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Dmitry Torokhov authored
Do not try to free iforce device when we closing input device; disconnect is the only place where it should be deleted. Reported-by:
-
Jari Vanhala authored
This adds simple direction calculation when combining effects. It's useful to decide motor direction for rumble (vibrator). Signed-off-by:
Jari Vanhala <ext-jari.vanhala@nokia.com> Acked-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
-
Dmitry Torokhov authored
The commit 9e68177e changed 'gain' from signed to unsigned to fix an issue with rumble effect calculation, however it introduced problems when calculating constant effects. Having 'gain' being unsigned int was an unfortunate choice since it dominates all implicit type conversions causing everything to be treated as unsigned int. Let's change it back to signed int and simply add proper casts to rumble effect calculations. Reported-by:
Gary Stein <lordcnidarian@gmail.com> Acked-by:
-
Jari Vanhala authored
Instead of waiting for the next timer tick to start playing an effect do it immediately. This mostly helps systems using low HZ setting. Signed-off-by:
-
Dmitry Torokhov authored
We used to make kseriod freezable to prevent unnecessary attempts at resuming keyboard and mouse before taking hibernation image when suspend and hibernation were sharing PM operations. Now that they are separated and we don't risk resuming during 'thaw' we don't need to freeze kseriod anymore. This will allow us to start resetting mouse and keyboard a bit earlier, before rest of the userspace comes back up. Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Dmitry Torokhov authored
Instead of doing full-blown reset while suspending or shutting down the box use lighter form of reset that should take less time. Tested-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
-
- 16 Dec, 2009 2 commits
-
-
Sebastian Kapfer authored
Properly handle version of the protocol where standard PS/2 packets from trackpoint are stuffed into middle (byte 3-6) of the standard ALPS packets when both the touchpad and trackpoint are used together. The patch is based on work done by Matthew Chapman and additional research done by David Kubicek and Erik Osterholm: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610 Many thanks to David Kubicek for his efforts in researching fine points of this new version of the protocol, especially interaction between pad and stick in these models. Signed-off-by:
Sebastian Kapfer <sebastian_kapfer@gmx.net> Signed-off-by:
-
Dmitry Torokhov authored
The commit 66d2a595 introduces a bug: for every beep requested, a bell is also generated. Reported-by:
Paul Martin <pm@debian.org> Signed-off-by:
-
- 15 Dec, 2009 11 commits
-
-
Roel Kluin authored
ps2if->irq is unsigned so the test does not work. Signed-off-by:
-
Sascha Hauer authored
This driver provides support for the touchscreen interface integrated into the Freescale MC13783. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
-
H Hartley Sweeten authored
This driver was merged before the ep93xx core support was added for the keypad clock and acquiring/releasing the necessary gpio's. Now that the proper support is in the ep93xx core this driver needs to be updated to work correctly. Summary of changes: 1) Remove some unused members from the platform data. 2) Remove the custom KEY macro and use the ones available in <linux/input/matrix_keypad.h> 3) Remove the keypad_{readl/writel} macros and just use __raw_{readl/writel} directly. 4) Update the clk_set_rate() call to work with the core support. 5) Cleanup the probe routine and remove some unneeded messages. 6) Use the ep93xx core functions to acquire and release the gpio's. 7) Fix the clk_get() call to get the keypad clock. Signed-off-by:H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Dmitry Torokhov authored
-
Ping Cheng authored
Since Graphire/Bamboo devices report pen and expresskeys in the same data packet, we need to send a input_sync event to separate pen data from expresskeys for X11 driver to process them properly. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Ping Cheng authored
Signed-off-by:
-
Ping Cheng authored
This adds support for the foolowing Wacom devices: - 0x9F - a single touch only LCD tablet; - 0xE2 - a two finger touch only LCD tablet; - 0xE3 - a two finger touch, penabled LCD tablet. Signed-off-by:
-
Ping Cheng authored
Signed-off-by:
-
Ping Cheng authored
Call wacom_query_tablet_data() from wacom_resume() so the device will be switched to Wacom mode upon resume. Devices that require this are: regular tablets and two finger touch devices. Signed-off-by:
-
Dmitry Torokhov authored
We can't use msleep() while holding a spinlock, moreower serio's write() method is supposed to be useable from inettrupt context. Let's do what i8042 does and poll the status register every 50 us (with udelay). Reported-by:
Marjan Fojkar <marjan@pajkc.eu> Signed-off-by:
-
Dmitry Torokhov authored
Gigabyte netbook model M1022M requires i8042.noloop, otherwise AUX port will not detected and the touchpad will not work. Unfortunately chassis type in DMI set to "Other" and thus generic laptop entry does not fire on it. Reported-by:
Darryl Bond <dbond@nrggos.com.au> Signed-off-by:
-
- 14 Dec, 2009 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Avoid IO in udf_clear_inode udf: Try harder when looking for VAT inode udf: Fix compilation with UDFFS_DEBUG enabled
-
Jan Kara authored
It is not very good to do IO in udf_clear_inode. First, VFS does not really expect inode to become dirty there and thus we have to write it ourselves, second, memory reclaim gets blocked waiting for IO when it does not really expect it, third, the IO pattern (e.g. on umount) resulting from writes in udf_clear_inode is bad and it slows down writing a lot. The reason why UDF needed to do IO in udf_clear_inode is that UDF standard mandates extent length to exactly match inode size. But when we allocate extents to a file or directory, we don't really know what exactly the final file size will be and thus temporarily set it to block boundary and later truncate it to exact length in udf_clear_inode. Now, this is changed to truncate to final file size in udf_release_file for regular files. For directories and symlinks, we do the truncation at the moment when learn what the final file size will be. Signed-off-by:Jan Kara <jack@suse.cz>
-
Jan Kara authored
Some disks do not contain VAT inode in the last recorded block as required by the standard but a few blocks earlier (or the number of recorded blocks is wrong). So look for the VAT inode a bit before the end of the media. Signed-off-by: -
Jan Kara authored
Signed-off-by: -
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: Clean up thermal init by introducing intel_thermal_supported() x86, mce: Thermal monitoring depends on APIC being enabled x86: Gart: fix breakage due to IOMMU initialization cleanup x86: Move swiotlb initialization before dma32_free_bootmem x86: Fix build warning in arch/x86/mm/mmio-mod.c x86: Remove usedac in feature-removal-schedule.txt x86: Fix duplicated UV BAU interrupt vector nvram: Fix write beyond end condition; prove to gcc copy is safe mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe x86: Limit the number of processor bootup messages x86: Remove enabling x2apic message for every CPU doc: Add documentation for bootloader_{type,version} x86, msr: Add support for non-contiguous cpumasks x86: Use find_e820() instead of hard coded trampoline address x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: CodingStyle fixes pcmcia: remove unused IRQ_FIRST_SHARED
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf sched: Fix build failure on sparc perf bench: Add "all" pseudo subsystem and "all" pseudo suite perf tools: Introduce perf_session class perf symbols: Ditch dso->find_symbol perf symbols: Allow lookups by symbol name too perf symbols: Add missing "Variables" entry to map_type__name perf symbols: Add support for 'variable' symtabs perf symbols: Introduce ELF counterparts to symbol_type__is_a perf symbols: Introduce symbol_type__is_a perf symbols: Rename kthreads to kmaps, using another abstraction for it perf tools: Allow building for ARM hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value perf tools: Allow cross compiling tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING Trivial conflict due to different fixes to modify_user_hw_breakpoint() in include/linux/hw_breakpoint.h
-
David Howells authored
Global variable declarations must match the definitions in section attributes as the compiler is at liberty to vary the method it uses to access a variable, depending on the section it is in. When building the FRV arch, I now see: drivers/built-in.o: In function `pci_apply_final_quirks': drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o because the declaration of pci_dfl_cache_line_size in linux/pci.h does not match the definition in drivers/pci/pci.c. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
If there is no hardware breakpoint support, modify_user_hw_breakpoint() tries to return a NULL pointer through as an 'int' return value: In file included from kernel/exit.c:53: include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint': include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast Return 0 instead. Signed-off-by:
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits) microblaze: Remove rt_sigsuspend wrapper microblaze: nommu: Don't clobber R11 on syscalls microblaze: Remove show_tmem function microblaze: Support for WB cache microblaze: Add PVR for Microblaze v7.30.a microblaze: Remove ancient and fake microblaze version from cpu_ver table microblaze: Remove panic_timeout init value microblaze: Do not count system calls in default microblaze: Enable DTC compilation microblaze: Core oprofile configs and hooks microblaze: Fix level interrupt ACKing microblaze: Enable futimesat syscall microblaze: Checking DTS against PVR for write-back cache microblaze: Remove duplicity from pgalloc.h microblaze: Futex support microblaze: Adding dev_arch_data functions microblaze: Fix the heartbeat gpio to be more robust microblaze: Simple __copy_tofrom_user for noMMU microblaze: Export memory_start for modules microblaze: Use lowest-common-denominator default CPU settings ...
-
