The new carry handling code in the CTR driver can deal with a carry
occurring in the 4x/5x parallel code path, by using a computed goto to
jump into the carry sequence at the right place as to only apply the
carry to a subset of the blocks being processed.

If the lower half of the counter wraps and ends up at exactly 0x0, a
carry needs to be applied to the counter, but not to the counter values
taken for the 4x/5x parallel sequence. In this case, the computed goto
skips all register assignments, and branches straight to the jump
instruction that gets us back to the fast path. This produces the
correct result, but due to the fact that this branch target does not
carry the correct BTI annotation, this fails when BTI is enabled.

Let's omit the computed goto entirely in this case, and jump straight
back to the fast path after applying the carry to the main counter.

Fixes: 5318d3db ("crypto: arm64/aes-ctr - improve tail handling")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kunpeng930 could be able to stop queue by writing hardware registers,
which will trigger tasks in device to be flushed out.

In order to be compatible with the kunpeng920 driver, add 'qm_hw_ops_v3' to
adapt Kunpeng930. And 'stop_qp' callback is added in 'qm_hw_ops_v3' to
write hardware registers. Call 'stop_qp' to drain the tasks in device
before releasing queue.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This function declaration has been added in 'ecc_curve.h',
delete it in 'crypto/ecc.h'.

Fixes: 4e660291(crypto: ecdsa - Add support for ECDSA ...)
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The rxchannel id is updated by the driver using the
port no value, but this does not ensure that the value
is correct. So now rx channel value is obtained from
etoc channel map value.

Fixes: 567be3a5 ("crypto: chelsio - Use multiple txq/rxq per...")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().

My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.

Fixes: a672a9dc ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The "qdma" is a structure variable instead of actual data. This
structure doesn't need to be zerod, The memset is useless and redundant.
So delete it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

skcipher: Add a verifying to check whether the triple DES key
is weak.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are two error return paths that are not freeing rxd and causing
memory leaks.  Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: 00c9211f ("crypto: sa2ul - Fix DMA mapping API usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It appears there are several failure return paths that don't seem
to be free'ing pad. Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: d9b45418 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Delete unneeded variable initialization
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Do a trivial typo fix.
s/discribed/described
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the following whitescan warning:

Assigning value "64" to "dst.address" here, but that stored value is
overwritten before it can be used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ctx_q_num is a module parameter set by the user to specify the
number of qp queues required to create a ctx.

When the number of qp queues allocated by PF or VF is less than
the ctx_q_num, an error will be reported when ctx is initialized
in kernel mode, which leads to the problem that the registered
algorithms cannot be used.

Therefore, when PF or VF is initialized, if the number of qp queues
is not enough to create a ctx, the kernel mode cannot be used,
and there is no need to register the kernel mode algorithms.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some CONFIG select miss CRYPTO_.
Reported-by: Chen-Yu Tsai <wens@csie.org>
Fixes: 56f6d5ae ("crypto: sun8i-ce - support hash algorithms")
Fixes: d9b45418 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The input data of the ECB (AES) algorithm needs to be aligned
with 16 bytes, and the input data of the XTS (AES) algorithm is
at least 16 bytes. Otherwise the SEC hardware will go wrong.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

HPRE can only deal with src_data smaller than 'p' in 'CURVE25519'
algorithm, but 'rfc7748' says:
'Implementations MUST accept non-canonical values and process them as
if they had been reduced modulo the field prime'
So we get its modulus to p, and then deal it with HPRE.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It has newline already by sysfs, so delete redundant '\n'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

s/shoul/should/
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We must confirm the PASID is disabled before using no-sva mode.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Kunpeng930 changes some field meanings in 'sqe'. So add a new
'hisi_zip_sqe_ops' to describe the 'sqe' operations.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The operations about 'sqe' are different on some hardwares. Add a struct
'hisi_zip_sqe_ops' to describe the operations in a hardware. And choose the
'ops' in 'hisi_zip_acomp_init' according to the hardware.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some fields of 'hisi_zip_sqe' are unused, and some fields have misc
utilities. So add comments for used fields and make others unnamed.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch changes nothing about functions except location in order to make
code logic clearly.

This adjustment follows three principles:
1.The called functions are listed in order above the calling functions.
2.The paired functions are next to each other.
3.Logically similar functions are placed in the same area. Here, we use
the callback of 'acomp_alg' as the basis for dividing areas.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the 'do while(0)' loop in the macro, as it is not needed for single
statement macros. Condense into one line.
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the else because the if statement has a break statement. Fix the
checkpatch.pl warning.
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

s/Hisilicon/HiSilicon/g,
according to https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function adf_isr_resource_alloc() is not unwinding correctly in case
of error.
This patch fixes the error paths and propagate the errors to the caller.

Fixes: 7afa232e ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():

lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
   13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
      |                                                          ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
   21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);

This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.

Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.

Fixes: 1c08a104 ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the of_device_get_match_data() helper instead of open coding.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove some dead code that was left over following commit 90ea1c64
("random: remove the blocking pool").

Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

On big endian CPUs, the ChaCha20-based CRNG is using the wrong
endianness for the ChaCha20 constants.

This doesn't matter cryptographically, but technically it means it's not
ChaCha20 anymore.  Fix it to always use the standard constants.

Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_stats_get() is a no-op when the kernel is compiled without
CONFIG_CRYPTO_STATS, so pairing it with crypto_alg_put() unconditionally
(as crypto_rng_reset() does) is wrong.

Fix this by moving the call to crypto_stats_get() to just before the
actual algorithm operation which might need it.  This makes it always
paired with crypto_stats_rng_seed().

Fixes: eed74b3e ("crypto: rng - Fix a refcounting bug in crypto_rng_reset()")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/nx, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.

E.g., presence of kernel-doc like comment in the header lines for
drivers/crypto/nx/nx-sha256.c at header causes these warnings:
"warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha256_init'"
"warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha256_init() instead"

Similarly for other files too.

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/ux500, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.

E.g., presence of kernel-doc like comment in the header lines for
drivers/crypto/ux500/cryp/cryp.h at header causes this warning:

"warning: expecting prototype for ST(). Prototype was for _CRYP_H_() instead"

Similarly for other files too.

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/amcc, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.

E.g., presence of kernel-doc like comment in
drivers/crypto/amcc/crypto4xx_alg.c at header, and some other lines,
causes these warnings by kernel-doc:

"warning: expecting prototype for AMCC SoC PPC4xx Crypto Driver(). Prototype was for set_dynamic_sa_command_0() instead"
"warning: Function parameter or member 'dir' not described in 'set_dynamic_sa_command_0'"
etc..

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/vmx, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.

E.g., presence of kernel-doc like comment in the header line for
drivers/crypto/vmx/vmx.c causes this warning by kernel-doc:

"warning: expecting prototype for Routines supporting VMX instructions on the Power 8(). Prototype was for p8_init() instead"

Similarly for other files too.

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kunpeng930 supports doorbell isolation to ensure that each queue
has an independent doorbell address space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>