- 10 Jun, 2015 14 commits
-
-
David Howells authored
Copy the loop_through setting from the ts2020_config struct to the internal ts2020_priv struct so that it can actually be used. Whilst we're at it, group the bitfields together in the same order in both structs so that the compiler has a good chance to copy them in one go. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
David Howells authored
Provide a DVBv5 API signal strength. This is in units of 0.001 dBm rather than a percentage. >From Antti Palosaari's testing with a signal generator, it appears that the gain calculated according to Montage's specification if negated is a reasonable representation of the signal strength of the generator. To this end: (1) Polled statistic gathering needed to be implemented in the TS2020 driver. This is done in the ts2020_stat_work() function. (2) The calculated gain is placed as the signal strength in the dtv_property_cache associated with the front end with the scale set to FE_SCALE_DECIBEL. (3) The DVBv3 format signal strength then needed to be calculated from the signal strength stored in the dtv_property_cache rather than accessing the value when ts2020_read_signal_strength() is called. Signed-off-by: -
David Howells authored
The TS2020 and TS2022 tuners take an input from the demodulator indicating the AGC setting on that component that is then used to influence the tuner's own gain. This should be taken into account when calculating the gain and signal strength. Further, the existing TS2020 driver miscalculates the signal strength as the result of its calculations can exceed the storage capacity of the 16-bit word used to return it to userspace. To this end: (1) Add a callback function (->get_agc_pwm()) in the ts2020_config struct that the tuner can call to get the AGC PWM value from the demodulator. (2) Modify the TS2020 driver to calculate the gain according to Montage's specification with the adjustment that we produce a negative value and scale it to 0.001dB units (which is what the DVBv5 API will require): (a) Callback to the demodulator to retrieve the AGC PWM value and then turn that into Vagc for incorporation in the calculations. If the callback is unset, assume a Vagc of 0. (b) Calculate the tuner gain from a combination of Vagc and the tuner's RF gain and baseband gain settings. (3) Turn this into a percentage signal strength as per Montage's specification for return to userspace with the DVBv3 API. (4) Provide a function in the M88DS3103 demodulator driver that can be used to get the AGC PWM value on behalf of the tuner. (5) The ts2020_config.get_agc_pwm function should be set by the code that stitches together the drivers for each card. For the DVBSky cards that use the M88DS3103 with the TS2020 or the TS2022, set the get_agc_pwm function to point to m88ds3103_get_agc_pwm. I have tested this with a DVBSky S952 card which has an M88DS3103 and a TS2022. Thanks to Montage for providing access to information about the workings of these parts. Signed-off-by: -
Antti Palosaari authored
Use I2C client binding for demod and SEC. Signed-off-by:
-
Antti Palosaari authored
Use regmap for I2C register access. Remove own I2C repeated mutex as it should not be needed. I2C adapter lock is already taken when I2C mux adapter is called, no need for double locking. Signed-off-by:
-
Antti Palosaari authored
Rename driver state from priv to dev. Use I2C client for correct logging. Use adapter and address from I2C client structure where needed. Signed-off-by:
-
David Howells authored
ts2020_attach() allocates a variable pdata on the stack and then passes a pointer to it to i2c_new_device() which stashes the pointer in persistent structures. Add a comment to the effect that this isn't actually an error because the contents of the variable are only used in ts2020_probe() and this is only called ts2020_attach()'s stack frame exists. Signed-off-by:
-
Antti Palosaari authored
Use regmap to cover I2C register access. Signed-off-by:
-
Antti Palosaari authored
Register driver using I2C bindings internally when legacy media attach is used. That is done by registering driver using I2C binding from legacy attach. That way we can get valid I2C client, which is needed for proper dev_() logging and regmap for example even legacy binding is used. Signed-off-by:
-
Antti Palosaari authored
* We don't need calculate channel bandwidth from symbol rate as it is calculated by DVB core. * Use clamp() to force upper/lower limit of filter 3dB frequency. Upper limit should never exceeded 40MHz (80MHz BW) in any case, though... Signed-off-by:
-
Antti Palosaari authored
Used frequency synthesizer is simple Integer-N PLL, with configurable reference divider, output divider and of course N itself. Old calculations were working fine, but not so easy to understand. Signed-off-by:
-
Hans Verkuil authored
There are still some 64-bit division problems in the cobalt code. Replace it by div_u64. [mchehab@osg.samsung.com: folded with an additional diff sent by Hans via a priv e-mail] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reported-by:
-
Heiko Stübner authored
Don't allow sleep when getting the gpio value in the irq-handler. On my rk3288 board this results in might_sleep warnings when receiving data like: BUG: sleeping function called from invalid context at drivers/gpio/gpiolib.c:1531 in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: P 4.1.0-rc5+ #2011 Hardware name: Rockchip (Device Tree) [<c00189a0>] (unwind_backtrace) from [<c0013b04>] (show_stack+0x20/0x24) [<c0013b04>] (show_stack) from [<c0757970>] (dump_stack+0x8c/0xbc) [<c0757970>] (dump_stack) from [<c0053188>] (___might_sleep+0x238/0x284) [<c0053188>] (___might_sleep) from [<c0053264>] (__might_sleep+0x90/0xa4) [<c0053264>] (__might_sleep) from [<c02ff4ac>] (gpiod_get_raw_value_cansleep+0x28/0x44) [<c02ff4ac>] (gpiod_get_raw_value_cansleep) from [<bf0363c4>] (gpio_ir_recv_irq+0x24/0x6c [gpio_ir_recv]) [<bf0363c4>] (gpio_ir_recv_irq [gpio_ir_recv]) from [<c008a78c>] (handle_irq_event_percpu+0x164/0x550) [<c008a78c>] (handle_irq_event_percpu) from [<c008abc4>] (handle_irq_event+0x4c/0x6c) [<c008abc4>] (handle_irq_event) from [<c008df88>] (handle_edge_irq+0x128/0x150) [<c008df88>] (handle_edge_irq) from [<c0089edc>] (generic_handle_irq+0x30/0x40) [<c0089edc>] (generic_handle_irq) from [<c02fc4cc>] (rockchip_irq_demux+0x158/0x210) [<c02fc4cc>] (rockchip_irq_demux) from [<c0089edc>] (generic_handle_irq+0x30/0x40) [<c0089edc>] (generic_handle_irq) from [<c008a058>] (__handle_domain_irq+0x98/0xc0) [<c008a058>] (__handle_domain_irq) from [<c00094a4>] (gic_handle_irq+0x4c/0x70) [<c00094a4>] (gic_handle_irq) from [<c0014684>] (__irq_svc+0x44/0x5c) Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Tina Ruchandani authored
struct timeval uses a 32-bit seconds representation which will overflow in the year 2038 and beyond. This patch replaces the usage of struct timeval with ktime_t which is a 64-bit timestamp and is year 2038 safe. This patch is part of a larger attempt to remove all instances of 32-bit timekeeping variables (timeval, timespec, time_t) which are not year 2038 safe, from the kernel. [mchehab@osg.samsung.com: add a missing parenthesis, breaking compilation] Suggested-by:
Arnd Bergmann <arndb@arndb.de> Signed-off-by:
Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 09 Jun, 2015 26 commits
-
-
Jemma Denson authored
The flexcop bridge chip has two banks of hardware pid filters - an initial 6, and on some chip revisions an additional bank of 32. A bug is present on the initial 6 - when changing transponders one of two PAT packets from the old transponder would be included in the initial packets from the new transponder. This usually transpired with userspace programs complaining about services missing, because they are seeing a PAT that they would not be expecting. Running in full TS mode does not exhibit this problem, neither does using just the additional 32. This patch adds in an option to not use the inital 6 and solely use just the additional 32, and enables this option for the SkystarS2 card. Other cards can be added as required if they also have this bug. Signed-off-by:
Jemma Denson <jdenson@gmail.com> Signed-off-by:
-
Takeshi Yoshimura authored
My static checker detected that free_irq() is called even after request_irq() failed in ddb_probe(). In this case, the kernel may try to free dev->pdev->irq although the IRQ is not assigned. This event rarely occurs, but always introduces a warning if it happens. "goto fail1" always results in disabling enabled MSI and releasing a requested IRQ. It seems like the former handling is necessary. So I added a conditional branch before the free_irq() (stat == 0 means request_irq() succeeds). Signed-off-by:
Takeshi Yoshimura <yos@sslab.ics.keio.ac.jp> Signed-off-by:
-
Piotr S. Staszewski authored
This reformats lines that were previously above 80 characters long, improving readability and making checkpatch.pl happier. Signed-off-by:
Piotr S. Staszewski <p.staszewski@gmail.com> Signed-off-by:
-
Ksenija Stanojevic authored
'struct timeval last_tv' is used to get the time of last signal change and 'struct timeval last_intr_tv' is used to get the time of last UART interrupt. 32-bit systems using 'struct timeval' will break in the year 2038, so we have to replace that code with more appropriate types. Here struct timeval is replaced with ktime_t. Signed-off-by:
Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
The card lists at Documentation/video4linux are missing some boards. Add them. Signed-off-by: -
Dmitry Eremin-Solenikov authored
Add AverMedia AverTV/505 card to saa7134 driver. It is a card bearing SAA7130HL chip and FQ1216ME/IH-3 tuner. Working: Composite, TV and IR remote control. Untested: S-Video. [mchehab@osg.samsung.com: fix CodingStyle] Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Jemma Denson authored
Compilation warning issued by kbuild test robot: >> drivers/media/common/b2c2/flexcop-fe-tuner.c:31:12: warning: 'flexcop_fe_request_firmware' defined but not used [-Wunused-function] static int flexcop_fe_request_firmware(struct dvb_frontend *fe, This patch fixes a mismatch in Kconfig define checks. One had a check for just CX24120, the other is checking for both CX24120 and ISL6421. Signed-off-by: -
Tommi Rantala authored
Add support for the Terratec Grabby with USB ID 0ccd:00a6. Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The coda tracing code causes lots of warnings like In file included from /git/arm-soc/include/trace/define_trace.h:90:0, from /git/arm-soc/drivers/media/platform/coda/trace.h:203, from /git/arm-soc/drivers/media/platform/coda/coda-bit.c:34: /git/arm-soc/include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined #define TRACE_SYSTEM_STRING __app(TRACE_SYSTEM_VAR,__trace_system_name) ^ In file included from /git/arm-soc/include/trace/define_trace.h:83:0, from /git/arm-soc/drivers/media/platform/coda/trace.h:203, from /git/arm-soc/drivers/media/platform/coda/coda-bit.c:34: /git/arm-soc/drivers/media/platform/coda/./trace.h:12:0: note: this is the location of the previous definition #define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM) >From what I can tell, this is just the result of a bogus TRACE_SYSTEM_STRING definition, and removing that one makes the warnings go away. Fixes: 9a1a8f99 ("[media] coda: Add tracing support") Signed-off-by:Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Some USB drivers have a logic at the VB buffer handling like: if (in_interrupt()) BUG(); Use, instead: BUG_ON(in_interrupt()); Btw, this logic looks weird on my eyes. We should convert them to use VB2, in order to avoid those crappy things. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The subdev API is optional. No driver should depend on it. Avoid compilation breakages if subdev API is not selected: drivers/media/i2c/ov2659.c: In function ‘ov2659_get_fmt’: drivers/media/i2c/ov2659.c:1054:3: error: implicit declaration of function ‘v4l2_subdev_get_try_format’ [-Werror=implicit-function-declaration] mf = v4l2_subdev_get_try_format(sd, cfg, 0); ^ drivers/media/i2c/ov2659.c:1054:6: warning: assignment makes pointer from integer without a cast mf = v4l2_subdev_get_try_format(sd, cfg, 0); ^ drivers/media/i2c/ov2659.c: In function ‘ov2659_set_fmt’: drivers/media/i2c/ov2659.c:1129:6: warning: assignment makes pointer from integer without a cast mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); ^ drivers/media/i2c/ov2659.c: In function ‘ov2659_open’: drivers/media/i2c/ov2659.c:1264:38: error: ‘struct v4l2_subdev_fh’ has no member named ‘pad’ v4l2_subdev_get_try_format(sd, fh->pad, 0); ^ Signed-off-by: -
Hans Verkuil authored
Add entry for the bdisp driver to the MAINTAINERS file. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Fabien Dessenne authored
Creates 5 debugfs entries to dump the last HW request, the last HW node (=command), the HW registers and the recent HW performance (time & fps) Signed-off-by:
-
Fabien Dessenne authored
This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. It uses the v4l2 mem2mem framework. The following features are supported and tested: - Color format conversion (RGB32, RGB24, RGB16, NV12, YUV420P) - Copy - Scale - Flip - Deinterlace - Wide (4K) picture support - Crop Signed-off-by:
-
Fabien Dessenne authored
This adds DT binding documentation for STMicroelectronics bdisp driver. Signed-off-by:
-
Mauro Carvalho Chehab authored
Use a table for the Demux output. No new information added here. They were all merged inside the table. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several anonymous enums here, used via a typedef. Well, we don't like typedefs on Kernel, so let's de-anonimize those enums. Then, latter, we may be able to get rid of the typedefs, at least from Kernelspace. Signed-off-by: -
Mauro Carvalho Chehab authored
Let be clear, at the header, about what got deprecated. Signed-off-by: -
Mauro Carvalho Chehab authored
The comment for struct dvb_frontend_parameters is weird, as it mixes delivery system name (ATSC) with modulation names (QPSK, QAM, OFDM). Use delivery system names there on the frequency comment, as this is clearer, specially after 2GEN delivery systems. While here, add comments at the union, to make live easier for ones that may try to understand the convention used by the legacy API. Signed-off-by: -
Mauro Carvalho Chehab authored
The description of struct dtv_stats has a spmall typo: FE_SCALE_DECIBELS instead of FE_SCALE_DECIBEL Signed-off-by: -
Mauro Carvalho Chehab authored
The comments may affect enum value parsing. Use cpp to remove them. Signed-off-by: -
Mauro Carvalho Chehab authored
Just userspace need those typedefs. So, put it in the compat part of the header. Signed-off-by: -
Mauro Carvalho Chehab authored
In order to better organize the header file, move the legacy API (DVBv3) support to the end, just before the ioctl definitions. This way, we can use just one #if for all of them. Signed-off-by: -
Mauro Carvalho Chehab authored
The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: -
Mauro Carvalho Chehab authored
The only enum that was missing xrefs at frontend.h is fe_type. Add xrefs for them. Signed-off-by: -
Mauro Carvalho Chehab authored
Use a table for the delivery systems. The table is organized by the type (cable, satellite, terrestrial) and shows what standards are not fully implemented. Signed-off-by:
-
