- 30 Aug, 2017 40 commits
-
-
Eric Biggers authored
commit 263630e8 upstream. If madvise(..., MADV_FREE) split a transparent hugepage, it called put_page() before unlock_page(). This was wrong because put_page() can free the page, e.g. if a concurrent madvise(..., MADV_DONTNEED) has removed it from the memory mapping. put_page() then rightfully complained about freeing a locked page. Fix this by moving the unlock_page() before put_page(). This bug was found by syzkaller, which encountered the following splat: BUG: Bad page state in process syzkaller412798 pfn:1bd800 page:ffffea0006f60000 count:0 mapcount:0 mapping: (null) index:0x20a00 flags: 0x200000000040019(locked|uptodate|dirty|swapbacked) raw: 0200000000040019 0000000000000000 0000000000020a00 00000000ffffffff raw: ffffea0006f60020 ffffea0006f60020 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1(locked) Modules linked in: CPU: 1 PID: 3037 Comm: syzkaller412798 Not tainted 4.13.0-rc5+ #35 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 bad_page+0x230/0x2b0 mm/page_alloc.c:565 free_pages_check_bad+0x1f0/0x2e0 mm/page_alloc.c:943 free_pages_check mm/page_alloc.c:952 [inline] free_pages_prepare mm/page_alloc.c:1043 [inline] free_pcp_prepare mm/page_alloc.c:1068 [inline] free_hot_cold_page+0x8cf/0x12b0 mm/page_alloc.c:2584 __put_single_page mm/swap.c:79 [inline] __put_page+0xfb/0x160 mm/swap.c:113 put_page include/linux/mm.h:814 [inline] madvise_free_pte_range+0x137a/0x1ec0 mm/madvise.c:371 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:108 [inline] walk_p4d_range mm/pagewalk.c:134 [inline] walk_pgd_range mm/pagewalk.c:160 [inline] __walk_page_range+0xc3a/0x1450 mm/pagewalk.c:249 walk_page_range+0x200/0x470 mm/pagewalk.c:326 madvise_free_page_range.isra.9+0x17d/0x230 mm/madvise.c:444 madvise_free_single_vma+0x353/0x580 mm/madvise.c:471 madvise_dontneed_free mm/madvise.c:555 [inline] madvise_vma mm/madvise.c:664 [inline] SYSC_madvise mm/madvise.c:832 [inline] SyS_madvise+0x7d3/0x13c0 mm/madvise.c:760 entry_SYSCALL_64_fastpath+0x1f/0xbe Here is a C reproducer: #define _GNU_SOURCE #include <pthread.h> #include <sys/mman.h> #include <unistd.h> #define MADV_FREE 8 #define PAGE_SIZE 4096 static void *mapping; static const size_t mapping_size = 0x1000000; static void *madvise_thrproc(void *arg) { madvise(mapping, mapping_size, (long)arg); } int main(void) { pthread_t t[2]; for (;;) { mapping = mmap(NULL, mapping_size, PROT_WRITE, MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); munmap(mapping + mapping_size / 2, PAGE_SIZE); pthread_create(&t[0], 0, madvise_thrproc, (void*)MADV_DONTNEED); pthread_create(&t[1], 0, madvise_thrproc, (void*)MADV_FREE); pthread_join(t[0], NULL); pthread_join(t[1], NULL); munmap(mapping, mapping_size); } } Note: to see the splat, CONFIG_TRANSPARENT_HUGEPAGE=y and CONFIG_DEBUG_VM=y are needed. Google Bug Id: 64696096 Link: http://lkml.kernel.org/r/20170823205235.132061-1-ebiggers3@gmail.com Fixes: 854e9ed0 ("mm: support madvise(MADV_FREE)") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ulf Hansson authored
commit a23318fe upstream. The commit 8503ff16 ("i2c: designware: Avoid unnecessary resuming during system suspend"), may suggest to the PM core to try out the so called direct_complete path for system sleep. In this path, the PM core treats a runtime suspended device as it's already in a proper low power state for system sleep, which makes it skip calling the system sleep callbacks for the device, except for the ->prepare() and the ->complete() callbacks. However, the PM core may unset the direct_complete flag for a parent device, in case its child device are being system suspended before. In this scenario, the PM core invokes the system sleep callbacks, no matter if the device is runtime suspended or not. Particularly in cases of an existing i2c slave device, the above path is triggered, which breaks the assumption that the i2c device is always runtime resumed whenever the dw_i2c_plat_suspend() is being called. More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and clk_core_unprepare(), for an already disabled/unprepared clock, leading to a splat in the log about clocks calls being wrongly balanced and breaking system sleep. To still allow the direct_complete path in cases when it's possible, but also to keep the fix simple, let's runtime resume the i2c device in the ->suspend() callback, before continuing to put the device into low power state. Note, in cases when the i2c device is attached to the ACPI PM domain, this problem doesn't occur, because ACPI's ->suspend() callback, assigned to acpi_subsys_suspend(), already calls pm_runtime_resume() for the device. It should also be noted that this change does not fix commit 8503ff16 ("i2c: designware: Avoid unnecessary resuming during system suspend"). Because for the non-ACPI case, the system sleep support was already broken prior that point. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Kirill A. Shutemov authored
commit 435c0b87 upstream. /sys/kernel/mm/transparent_hugepage/shmem_enabled controls if we want to allocate huge pages when allocate pages for private in-kernel shmem mount. Unfortunately, as Dan noticed, I've screwed it up and the only way to make kernel allocate huge page for the mount is to use "force" there. All other values will be effectively ignored. Link: http://lkml.kernel.org/r/20170822144254.66431-1-kirill.shutemov@linux.intel.com Fixes: 5a6e75f8 ("shmem: prepare huge= mount option and sysfs knob") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alexey Brodkin authored
commit 7d79cee2 upstream. It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Reported-by:
Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: PAR40 regs only written if PAE40 exist] Signed-off-by:
-
Takashi Sakamoto authored
commit 0c264af7 upstream. When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: 324540c4 ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d59 ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb190 ('ALSA: dice: postpone card registration') at v4.5 Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit bbba6f9d upstream. Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the similar workaround for the inverted stereo dmic like other Lenovo models. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657Signed-off-by:
-
Takashi Iwai authored
commit 88c54cdf upstream. When user tries to replace the user-defined control TLV, the kernel checks the change of its content via memcmp(). The problem is that the kernel passes the return value from memcmp() as is. memcmp() gives a non-zero negative value depending on the comparison result, and this shall be recognized as an error code. The patch covers that corner-case, return 1 properly for the changed TLV. Fixes: 8aa9b586 ("[ALSA] Control API - more robust TLV implementation") Signed-off-by:
-
Joakim Tjernlund authored
commit 07b3b5e9 upstream. These headsets reports a lot of: cannot set freq 44100 to ep 0x81 and need a small delay between sample rate settings, just like Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for a 1 ms delay between control msgs. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
-
Paolo Bonzini authored
commit c469268c upstream. If the host has protection keys disabled, we cannot read and write the guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block the PKU cpuid bit in that case. This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1. Fixes: 1be0e61cReviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Heiko Carstens authored
commit 857b8de9 upstream. sthyi should only generate a specification exception if the function code is zero and the response buffer is not on a 4k boundary. The current code would also test for unknown function codes if the response buffer, that is currently only defined for function code 0, is not on a 4k boundary and incorrectly inject a specification exception instead of returning with condition code 3 and return code 4 (unsupported function code). Fix this by moving the boundary check. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 4a4eefcd upstream. The sthyi inline assembly misses register r3 within the clobber list. The sthyi instruction will always write a return code to register "R2+1", which in this case would be r3. Due to that we may have register corruption and see host crashes or data corruption depending on how gcc decided to allocate and use registers during compile time. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by:
-
Masaki Ota authored
commit 4a646580 upstream. Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Tested-by:
Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
KT Liao authored
commit 1d2226e4 upstream. Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN touchpads found in Lenovo Yoga310. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
-
Aaron Ma authored
commit ec667683 upstream. Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Edward Cree authored
[ Upstream commit 9305706c ] We have to subtract the src max from the dst min, and vice-versa, since (e.g.) the smallest result comes from the largest subtrahend. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by:
Edward Cree <ecree@solarflare.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4cabc5b1 ] Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9 ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049 ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 48461135 ("bpf: allow access into map value arrays") Reported-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit fce366a9 ] While looking into map_value_adj, I noticed that alu operations directly on the map_value() resp. map_value_adj() register (any alu operation on a map_value() register will turn it into a map_value_adj() typed register) are not sufficiently protected against some of the operations. Two non-exhaustive examples are provided that the verifier needs to reject: i) BPF_AND on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0xbf842a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+2 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (57) r0 &= 8 8: (7a) *(u64 *)(r0 +0) = 22 R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=8 R10=fp 9: (95) exit from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp 9: (95) exit processed 10 insns ii) BPF_ADD in 32 bit mode on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0xc24eee00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+2 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (04) (u32) r0 += (u32) 0 8: (7a) *(u64 *)(r0 +0) = 22 R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 9: (95) exit from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp 9: (95) exit processed 10 insns Issue is, while min_value / max_value boundaries for the access are adjusted appropriately, we change the pointer value in a way that cannot be sufficiently tracked anymore from its origin. Operations like BPF_{AND,OR,DIV,MUL,etc} on a destination register that is PTR_TO_MAP_VALUE{,_ADJ} was probably unintended, in fact, all the test cases coming with 48461135 ("bpf: allow access into map value arrays") perform BPF_ADD only on the destination register that is PTR_TO_MAP_VALUE_ADJ. Only for UNKNOWN_VALUE register types such operations make sense, f.e. with unknown memory content fetched initially from a constant offset from the map value memory into a register. That register is then later tested against lower / upper bounds, so that the verifier can then do the tracking of min_value / max_value, and properly check once that UNKNOWN_VALUE register is added to the destination register with type PTR_TO_MAP_VALUE{,_ADJ}. This is also what the original use-case is solving. Note, tracking on what is being added is done through adjust_reg_min_max_vals() and later access to the map value enforced with these boundaries and the given offset from the insn through check_map_access_adj(). Tests will fail for non-root environment due to prohibited pointer arithmetic, in particular in check_alu_op(), we bail out on the is_pointer_value() check on the dst_reg (which is false in root case as we allow for pointer arithmetic via env->allow_ptr_leaks). Similarly to PTR_TO_PACKET, one way to fix it is to restrict the allowed operations on PTR_TO_MAP_VALUE{,_ADJ} registers to 64 bit mode BPF_ADD. The test_verifier suite runs fine after the patch and it also rejects mentioned test cases. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 3c2ce60b ] Current limits with regards to processing program paths do not really reflect today's needs anymore due to programs becoming more complex and verifier smarter, keeping track of more data such as const ALU operations, alignment tracking, spilling of PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for smarter matching of what LLVM generates. This also comes with the side-effect that we result in fewer opportunities to prune search states and thus often need to do more work to prove safety than in the past due to different register states and stack layout where we mismatch. Generally, it's quite hard to determine what caused a sudden increase in complexity, it could be caused by something as trivial as a single branch somewhere at the beginning of the program where LLVM assigned a stack slot that is marked differently throughout other branches and thus causing a mismatch, where verifier then needs to prove safety for the whole rest of the program. Subsequently, programs with even less than half the insn size limit can get rejected. We noticed that while some programs load fine under pre 4.11, they get rejected due to hitting limits on more recent kernels. We saw that in the vast majority of cases (90+%) pruning failed due to register mismatches. In case of stack mismatches, majority of cases failed due to different stack slot types (invalid, spill, misc) rather than differences in spilled registers. This patch makes pruning more aggressive by also adding markers that sit at conditional jumps as well. Currently, we only mark jump targets for pruning. For example in direct packet access, these are usually error paths where we bail out. We found that adding these markers, it can reduce number of processed insns by up to 30%. Another option is to ignore reg->id in probing PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning slightly as well by up to 7% observed complexity reduction as stand-alone. Meaning, if a previous path with register type PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then in the current state a PTR_TO_MAP_VALUE_OR_NULL register for the same map X must be safe as well. Last but not least the patch also adds a scheduling point and bumps the current limit for instructions to be processed to a more adequate value. Signed-off-by:
-
John Fastabend authored
[ Upstream commit 43188702 ] Currently the verifier does not track imm across alu operations when the source register is of unknown type. This adds additional pattern matching to catch this and track imm. We've seen LLVM generating this pattern while working on cilium. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 68a66d14 ] This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 4f8a881a ] As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b024d949 ] list.dev has not been initialized and so the copy_to_user is copying data from the stack back to user space which is a potential information leak. Fix this ensuring all of list is initialized to zero. Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit ca3d89a3 ] enable_4k_uar module parameter was added in patch cited below to address the backward compatibility issue in SRIOV when the VM has system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar implementation. The above compatibility issue does not exist in the non SRIOV case. In this patch, we always enable 4k uar implementation if SRIOV is not enabled on mlx4's supported cards. Fixes: 76e39ccf ("net/mlx4_core: Fix backward compatibility on VFs") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit cdbeb633 ] In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Suggested-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 348a4002 ] In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
-
Wei Wang authored
[ Upstream commit 383143f3 ] syzcaller reported the following use-after-free issue in rt6_select(): BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8 BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8 Read of size 4 by task syz-executor1/439628 CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00 ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0 ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380 Call Trace: [<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51 sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option. Use struct sctp_sack_info instead [<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285 [<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325 [<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline] [<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 [<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203 [<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95 [<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223 [<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41 [<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224 [<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943 [<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079 [<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91 [<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline] [<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272 [<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284 [<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564 [<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582 [<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563 [<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17 Object at ffff8800bc699380, in cache ip6_dst_cache size: 384 The root cause of it is that in fib6_add_rt2node(), when it replaces an existing route with the new one, it does not update fn->rr_ptr. This commit resets fn->rr_ptr to NULL when it points to a route which is replaced in fib6_add_rt2node(). Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5bfd37b4 ] syszkaller reported use-after-free in tipc [1] When msg->rep skb is freed, set the pointer to NULL, so that caller does not free it again. [1] ================================================================== BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466 Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115 CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 skb_push+0xd4/0xe0 net/core/skbuff.c:1466 tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9 RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76 R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651 __alloc_skb+0xf1/0x740 net/core/skbuff.c:219 alloc_skb include/linux/skbuff.h:903 [inline] tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148 tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:682 [inline] kfree_skb+0x165/0x4c0 net/core/skbuff.c:699 tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801c6e71dc0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 208 bytes inside of 224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0) The buggy address belongs to the page: page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 15339e44 ] KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit eac2c68d ] The while loop that performs the dma page unmapping never decrements index counter f and hence loops forever. Fix this with a pre-decrement on f. Detected by CoverityScan, CID#1357309 ("Infinite loop") Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c780a049 ] While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 81fbfe8a ] As found by syzkaller, malicious users can set whatever tx_queue_len on a tun device and eventually crash the kernel. Lets remove the ALIGN(XXX, SMP_CACHE_BYTES) thing since a small ring buffer is not fast anyway. Fixes: 2e0ab8ca ("ptr_ring: array based FIFO for pointers") Signed-off-by:
-
Liping Zhang authored
[ Upstream commit 494bea39 ] For sw_flow_actions, the actions_len only represents the kernel part's size, and when we dump the actions to the userspace, we will do the convertions, so it's true size may become bigger than the actions_len. But unfortunately, for OVS_PACKET_ATTR_ACTIONS, we use the actions_len to alloc the skbuff, so the user_skb's size may become insufficient and oops will happen like this: skbuff: skb_over_panic: text:ffffffff8148fabf len:1749 put:157 head: ffff881300f39000 data:ffff881300f39000 tail:0x6d5 end:0x6c0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8148be82>] skb_put+0x43/0x44 [<ffffffff8148fabf>] skb_zerocopy+0x6c/0x1f4 [<ffffffffa0290d36>] queue_userspace_packet+0x3a3/0x448 [openvswitch] [<ffffffffa0292023>] ovs_dp_upcall+0x30/0x5c [openvswitch] [<ffffffffa028d435>] output_userspace+0x132/0x158 [openvswitch] [<ffffffffa01e6890>] ? ip6_rcv_finish+0x74/0x77 [ipv6] [<ffffffffa028e277>] do_execute_actions+0xcc1/0xdc8 [openvswitch] [<ffffffffa028e3f2>] ovs_execute_actions+0x74/0x106 [openvswitch] [<ffffffffa0292130>] ovs_dp_process_packet+0xe1/0xfd [openvswitch] [<ffffffffa0292b77>] ? key_extract+0x63c/0x8d5 [openvswitch] [<ffffffffa029848b>] ovs_vport_receive+0xa1/0xc3 [openvswitch] [...] Also we can find that the actions_len is much little than the orig_len: crash> struct sw_flow_actions 0xffff8812f539d000 struct sw_flow_actions { rcu = { next = 0xffff8812f5398800, func = 0xffffe3b00035db32 }, orig_len = 1384, actions_len = 592, actions = 0xffff8812f539d01c } So as a quick fix, use the orig_len instead of the actions_len to alloc the user_skb. Last, this oops happened on our system running a relative old kernel, but the same risk still exists on the mainline, since we use the wrong actions_len from the beginning. Fixes: ccea7445 ("openvswitch: include datapath actions with sampled-packet upcall to userspace") Cc: Neil McKee <neil.mckee@inmon.com> Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 88a5c690 ] James reported that on MIPS32 bpf_trace_printk() is currently broken while MIPS64 works fine: bpf_trace_printk() uses conditional operators to attempt to pass different types to __trace_printk() depending on the format operators. This doesn't work as intended on 32-bit architectures where u32 and long are passed differently to u64, since the result of C conditional operators follows the "usual arithmetic conversions" rules, such that the values passed to __trace_printk() will always be u64 [causing issues later in the va_list handling for vscnprintf()]. For example the samples/bpf/tracex5 test printed lines like below on MIPS32, where the fd and buf have come from the u64 fd argument, and the size from the buf argument: [...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688) Instead of this: [...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512) One way to get it working is to expand various combinations of argument types into 8 different combinations for 32 bit and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64 as well that it resolves the issue. Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by:
James Hogan <james.hogan@imgtec.com> Tested-by:
-
Konstantin Khlebnikov authored
[ Upstream commit c90e9514 ] It was added in commit e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") to hide duplicates from "tc qdisc show" for incative deivices. After 59cc1f61 ("net: sched: convert qdisc linked list to hashtable") it triggered when classful qdisc is added to inactive device because default qdiscs are added before switching root qdisc. Anyway after commit ea327469 ("net: sched: avoid duplicates in qdisc dump") duplicates are filtered right in dumper. Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 325d5dc3 ] When sfq_enqueue() drops head packet or packet from another queue it have to update backlog at upper qdiscs too. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 187e5b3a ] If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daf ("ipv4: add reference counting to metrics") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 120e9dab ] syszkaller team reported another problem in DCCP [1] Problem here is that the structure holding RTO timer (ccid2_hc_tx_rto_expire() handler) is freed too soon. We can not use del_timer_sync() to cancel the timer since this timer wants to grab socket lock (that would risk a dead lock) Solution is to defer the freeing of memory when all references to the socket were released. Socket timers do own a reference, so this should fix the issue. [1] ================================================================== BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365 CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound call_usermodehelper_exec_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 call_timer_fn+0x233/0x830 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x7fd/0xb90 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:638 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702 RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline] RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline] RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343 RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006 RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98 RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60 R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0 </IRQ> release_task+0xe9e/0x1a40 kernel/exit.c:220 wait_task_zombie kernel/exit.c:1162 [inline] wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389 do_wait_thread kernel/exit.c:1452 [inline] do_wait+0x441/0xa90 kernel/exit.c:1523 kernel_wait4+0x1f5/0x370 kernel/exit.c:1665 SYSC_wait4+0x134/0x140 kernel/exit.c:1677 SyS_wait4+0x2c/0x40 kernel/exit.c:1673 call_usermodehelper_exec_sync kernel/kmod.c:286 [inline] call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323 process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097 worker_thread+0x223/0x1860 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425 Allocated by task 21267: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x127/0x750 mm/slab.c:3561 ccid_new+0x20e/0x390 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44 __dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344 dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538 dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline] dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __release_sock+0x124/0x360 net/core/sock.c:2269 release_sock+0xa4/0x2a0 net/core/sock.c:2784 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1642 SyS_connect+0x24/0x30 net/socket.c:1623 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3049: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190 dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225 inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833 dccp_done+0xb7/0xd0 net/dccp/proto.c:145 dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72 dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160 dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __sk_receive_skb+0x33e/0xc00 net/core/sock.c:521 dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455 process_backlog+0x203/0x740 net/core/dev.c:5130 napi_poll net/core/dev.c:5527 [inline] net_rx_action+0x792/0x1910 net/core/dev.c:5593 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 The buggy address belongs to the object at ffff8801d2660100 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1088 bytes inside of 1240-byte region [ffff8801d2660100, ffff8801d26605d8) The buggy address belongs to the page: page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0 flags: 0x200000000008100(slab|head) raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005 raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7749d4ff ] syzkaller reported that DCCP could have a non empty write queue at dismantle time. WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846 RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 RSP: 0018:ffff8801d182f108 EFLAGS: 00010297 RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280 RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0 R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1126 __fput+0x327/0x7e0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:246 task_work_run+0x18a/0x260 kernel/task_work.c:116 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xa32/0x1b10 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:969 get_signal+0x7e8/0x17e0 kernel/signal.c:2330 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263 Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 36f41f8f ] pfkey_broadcast() might be called from non process contexts, we can not use GFP_KERNEL in these cases [1]. This patch partially reverts commit ba51b6be ("net: Fix RCU splat in af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock() section. [1] : syzkaller reported : in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439 3 locks held by syzkaller183439/2932: #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649 #1: (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293 #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline] #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028 CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994 __might_sleep+0x95/0x190 kernel/sched/core.c:5947 slab_pre_alloc_hook mm/slab.h:416 [inline] slab_alloc mm/slab.c:3383 [inline] kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281 dump_sp+0x3d6/0x500 net/key/af_key.c:2685 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722 pfkey_process+0x606/0x710 net/key/af_key.c:2814 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x755/0x890 net/socket.c:2035 __sys_sendmsg+0xe5/0x210 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x445d79 RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79 RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008 RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700 R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000 R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000 Fixes: ba51b6be ("net: Fix RCU splat in af_key") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Tushar Dave authored
[ Upstream commit 6170a506 ] There is no need to log message if ATU hvapi couldn't get register. Unlike PCI hvapi, ATU hvapi registration failure is not hard error. Even if ATU hvapi registration fails (on system with ATU or without ATU) system continues with legacy IOMMU. So only log message when ATU hvapi successfully get registered. Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
