- 21 Apr, 2017 21 commits
-
-
Ariel Levkovich authored
This change fixes an incomplete validation of the user's flow attributes list. Previous implementation validated only matching of IPv4 Ethertype to IPv4 spec of outer headers (in case both Ethernet with specified Ethertype and IP specs were present) and lacked the validation of: 1. Matching of IPv6 Ethertype in Ethernet spec (if such exists) to an IPv6 protocol spec (if such exists). 2. Validation of Ethertype to IP protocol matching on inner headers specs. Which could cause some combinations of unmatching Ethernet and IP protocols to pass validation and apply on the device. The fix adds validation of IPv6 Ethertype and IP spec as well as performing the scan on both outer and inner attributes. Fixes: 038d2ef8 ("Add flow steering support") Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Bodong Wang authored
The kfree was called to free cqb, while it should free *cqb. Fixes: 1cbe6fc8 ("IB/mlx5: Add support for CQE compressing") Signed-off-by:
Bodong Wang <bodong@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
In order to enlarge the flow group size to 8k, we decrease the number of flow group types to 6 and increase the flow table size to 64k. Flow group size is calculated as follow: group_size = table_size / (#group_types + 1) Fixes: 038d2ef8 ('IB/mlx5: Add flow steering support') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Check that the required flow table size is supported by device. Return ENOMEM error if no space left. In addition change the create flow table routine to return ENOMEM instead of ENOSPC. Fixes: 038d2ef8 ('IB/mlx5: Add flow steering support') Signed-off-by:
-
Maor Gottlieb authored
Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise it would lead to SIGBUS. Remove the shared flags from the vma after we change it to be anonymous. This is easily reproduced by doing modprobe -r while running a user-space application such as raw_ethernet_bw. Fixes: 7c2344c3 ('IB/mlx5: Implements disassociate_ucontext API') Signed-off-by:
-
Maor Gottlieb authored
When the driver disassociate user context, it changes the vma to anonymous by setting the vm_ops to null and zap the vma ptes. In order to avoid race in the kernel, we need to take write lock before we change the vma entries. Fixes: 7c2344c3 ('IB/mlx5: Implements disassociate_ucontext API') Signed-off-by:
-
Maor Gottlieb authored
Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise it would lead to SIGBUS. Remove the shared flags from the vma after we change it to be anonymous. This is easily reproduced by doing modprobe -r while running a user-space application such as raw_ethernet_bw. Fixes: ae184dde ('IB/mlx4_ib: Disassociate support') Signed-off-by:
-
Maor Gottlieb authored
When the driver disassociate user context, it changes the vma to anonymous by setting the vm_ops to null and zap the vma ptes. In order to avoid race in the kernel, we need to take write lock before we change the vma entries. Fixes: ae184dde ('IB/mlx4_ib: Disassociate support') Signed-off-by:
-
Jack Morgenstein authored
A warning message during SRIOV multicast cleanup should have actually been a debug level message. The condition generating the warning does no harm and can fill the message log. In some cases, during testing, some tests were so intense as to swamp the message log with these warning messages, causing a stall in the console message log output task. This stall caused an NMI to be sent to all CPUs (so that they all dumped their stacks into the message log). Aside from the message flood causing an NMI, the tests all passed. Once the message flood which caused the NMI is removed (by reducing the warning message to debug level), the NMI no longer occurs. Sample message log (console log) output illustrating the flood and resultant NMI (snippets with comments and modified with ... instead of hex digits, to satisfy checkpatch.pl): <mlx4_ib> _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!... *** About 4000 almost identical lines in less than one second *** <mlx4_ib> _mlx4_ib_mcg_port_cleanup: ... WARNING: group refcount 1!!!... INFO: rcu_sched detected stalls on CPUs/tasks: { 17} (...) *** { 17} above indicates that CPU 17 was the one that stalled *** sending NMI to all CPUs: ... NMI backtrace for cpu 17 CPU: 17 PID: 45909 Comm: kworker/17:2 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 09/08/2013 Workqueue: events fb_flashcursor task: ffff880478...... ti: ffff88064e...... task.ti: ffff88064e...... RIP: 0010:[ffffffff81......] [ffffffff81......] io_serial_in+0x15/0x20 RSP: 0018:ffff88064e257cb0 EFLAGS: 00000002 RAX: 0000000000...... RBX: ffffffff81...... RCX: 0000000000...... RDX: 0000000000...... RSI: 0000000000...... RDI: ffffffff81...... RBP: ffff88064e...... R08: ffffffff81...... R09: 0000000000...... R10: 0000000000...... R11: ffff88064e...... R12: 0000000000...... R13: 0000000000...... R14: ffffffff81...... R15: 0000000000...... FS: 0000000000......(0000) GS:ffff8804af......(0000) knlGS:000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080...... CR2: 00007f2a2f...... CR3: 0000000001...... CR4: 0000000000...... DR0: 0000000000...... DR1: 0000000000...... DR2: 0000000000...... DR3: 0000000000...... DR6: 00000000ff...... DR7: 0000000000...... Stack: ffff88064e...... ffffffff81...... ffffffff81...... 0000000000...... ffffffff81...... ffff88064e...... ffffffff81...... ffffffff81...... ffffffff81...... ffff88064e...... ffffffff81...... 0000000000...... Call Trace: [<ffffffff813d099b>] wait_for_xmitr+0x3b/0xa0 [<ffffffff813d0b5c>] serial8250_console_putchar+0x1c/0x30 [<ffffffff813d0b40>] ? serial8250_console_write+0x140/0x140 [<ffffffff813cb5fa>] uart_console_write+0x3a/0x80 [<ffffffff813d0aae>] serial8250_console_write+0xae/0x140 [<ffffffff8107c4d1>] call_console_drivers.constprop.15+0x91/0xf0 [<ffffffff8107d6cf>] console_unlock+0x3bf/0x400 [<ffffffff813503cd>] fb_flashcursor+0x5d/0x140 [<ffffffff81355c30>] ? bit_clear+0x120/0x120 [<ffffffff8109d5fb>] process_one_work+0x17b/0x470 [<ffffffff8109e3cb>] worker_thread+0x11b/0x400 [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5aef>] kthread+0xcf/0xe0 [<ffffffff810a5a20>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645858>] ret_from_fork+0x58/0x90 [<ffffffff810a5a20>] ? kthread_create_on_node+0x140/0x140 Code: 48 89 e5 d3 e6 48 63 f6 48 03 77 10 8b 06 5d c3 66 0f 1f 44 00 00 66 66 66 6 As indicated in the stack trace above, the console output task got swamped. Fixes: b9c5d6a6 ("IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV") Cc: <stable@vger.kernel.org> # v3.6+ Signed-off-by:Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs. However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not called to free the allocated EQs. Fixes: e605b743 ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs") Cc: <stable@vger.kernel.org> # v3.4+ Signed-off-by:
-
Majd Dibbiny authored
On some environments, such as certain SR-IOV VF configurations, RoCE isn't supported for mlx4 Ethernet ports. Currently the driver will not open IB device on that port. This is problematic since we do want user-space RAW Ethernet QPs functionality to remain in place. For that end, enhance the relevant driver flows such that we do create a device instance in that case. Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The kernel commit cited below restructured ib device management so that the device kobject is initialized in ib_alloc_device. As part of the restructuring, the kobject is now initialized in procedure ib_alloc_device, and is later added to the device hierarchy in the ib_register_device call stack, in procedure ib_device_register_sysfs (which calls device_add). However, in the ib_device_register_sysfs error flow, if an error occurs following the call to device_add, the cleanup procedure device_unregister is called. This call results in the device object being deleted -- which results in various use-after-free crashes. The correct cleanup call is device_del -- which undoes device_add without deleting the device object. The device object will then (correctly) be deleted in the ib_register_device caller's error cleanup flow, when the caller invokes ib_dealloc_device. Fixes: 55aeed06 ("IB/core: Make ib_alloc_device init the kobject") Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by:
-
Parav Pandit authored
This patch fixes the kernel crash that occurs during ib_dealloc_device() called due to provider driver fails with an error after ib_alloc_device() and before it can register using ib_register_device(). This crashed seen in tha lab as below which can occur with any IB device which fails to perform its device initialization before invoking ib_register_device(). This patch avoids touching cache and port immutable structures if device is not yet initialized. It also releases related memory when cache and port immutable data structure initialization fails during register_device() state. [81416.561946] BUG: unable to handle kernel NULL pointer dereference at (null) [81416.570340] IP: ib_cache_release_one+0x29/0x80 [ib_core] [81416.576222] PGD 78da66067 [81416.576223] PUD 7f2d7c067 [81416.579484] PMD 0 [81416.582720] [81416.587242] Oops: 0000 [#1] SMP [81416.722395] task: ffff8807887515c0 task.stack: ffffc900062c0000 [81416.729148] RIP: 0010:ib_cache_release_one+0x29/0x80 [ib_core] [81416.735793] RSP: 0018:ffffc900062c3a90 EFLAGS: 00010202 [81416.741823] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [81416.749785] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff880859fec000 [81416.757757] RBP: ffffc900062c3aa0 R08: ffff8808536e5ac0 R09: ffff880859fec5b0 [81416.765708] R10: 00000000536e5c01 R11: ffff8808536e5ac0 R12: ffff880859fec000 [81416.773672] R13: 0000000000000000 R14: ffff8808536e5ac0 R15: ffff88084ebc0060 [81416.781621] FS: 00007fd879fab740(0000) GS:ffff88085fac0000(0000) knlGS:0000000000000000 [81416.790522] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81416.797094] CR2: 0000000000000000 CR3: 00000007eb215000 CR4: 00000000003406e0 [81416.805051] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [81416.812997] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [81416.820950] Call Trace: [81416.824226] ib_device_release+0x1e/0x40 [ib_core] [81416.829858] device_release+0x32/0xa0 [81416.834370] kobject_cleanup+0x63/0x170 [81416.839058] kobject_put+0x25/0x50 [81416.843319] ib_dealloc_device+0x25/0x40 [ib_core] [81416.848986] mlx5_ib_add+0x163/0x1990 [mlx5_ib] [81416.854414] mlx5_add_device+0x5a/0x160 [mlx5_core] [81416.860191] mlx5_register_interface+0x8d/0xc0 [mlx5_core] [81416.866587] ? 0xffffffffa09e9000 [81416.870816] mlx5_ib_init+0x15/0x17 [mlx5_ib] [81416.876094] do_one_initcall+0x51/0x1b0 [81416.880861] ? __vunmap+0x85/0xd0 [81416.885113] ? kmem_cache_alloc_trace+0x14b/0x1b0 [81416.890768] ? vfree+0x2e/0x70 [81416.894762] do_init_module+0x60/0x1fa [81416.899441] load_module+0x15f6/0x1af0 [81416.904114] ? __symbol_put+0x60/0x60 [81416.908709] ? ima_post_read_file+0x3d/0x80 [81416.913828] ? security_kernel_post_read_file+0x6b/0x80 [81416.920006] SYSC_finit_module+0xa6/0xf0 [81416.924888] SyS_finit_module+0xe/0x10 [81416.929568] entry_SYSCALL_64_fastpath+0x1a/0xa9 [81416.935089] RIP: 0033:0x7fd879494949 [81416.939543] RSP: 002b:00007ffdbc1b4e58 EFLAGS: 00000202 ORIG_RAX: 0000000000000139 [81416.947982] RAX: ffffffffffffffda RBX: 0000000001b66f00 RCX: 00007fd879494949 [81416.955965] RDX: 0000000000000000 RSI: 000000000041a13c RDI: 0000000000000003 [81416.963926] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000001b652a0 [81416.971861] R10: 0000000000000003 R11: 0000000000000202 R12: 00007ffdbc1b3e70 [81416.979763] R13: 00007ffdbc1b3e50 R14: 0000000000000005 R15: 0000000000000000 [81417.008005] RIP: ib_cache_release_one+0x29/0x80 [ib_core] RSP: ffffc900062c3a90 [81417.016045] CR2: 0000000000000000 Fixes: 55aeed06 ("IB/core: Make ib_alloc_device init the kobject") Fixes: 7738613e ("IB/core: Add per port immutable struct to ib_device") Cc: <stable@vger.kernel.org> # v4.2+ Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Feras Daoud authored
Before calling ipoib_stop, rtnl_lock should be taken, then the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY is set. On the other hand, the flow of multicast join task initializes a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this call returns EINVAL without setting the mcast completion and leads to a deadlock. ipoib_stop | | | clear_bit(IPOIB_FLAG_ADMIN_UP) | | | Context Switch | | ipoib_mcast_join_task | | | spin_lock_irq(lock) | | | init_completion(mcast) | | | set_bit(IPOIB_MCAST_FLAG_BUSY) | | | Context Switch | | clear_bit(IPOIB_FLAG_OPER_UP) | | | spin_lock_irqsave(lock) | | | Context Switch | | ipoib_mcast_join | return (-EINVAL) | | | spin_unlock_irq(lock) | | | Context Switch | | ipoib_mcast_dev_flush | wait_for_completion(mcast) | ipoib_stop will wait for mcast completion for ever, and will not release the rtnl_lock. As a result panic occurs with the following trace: [13441.639268] Call Trace: [13441.640150] [<ffffffff8168b579>] schedule+0x29/0x70 [13441.641038] [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0 [13441.641914] [<ffffffff810bc017>] ? complete+0x47/0x50 [13441.642765] [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200 [13441.643580] [<ffffffff8168b956>] wait_for_completion+0x116/0x170 [13441.644434] [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20 [13441.645293] [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib] [13441.646159] [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib] [13441.647013] [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib] Fixes: 08bc3276 ("IB/ipoib: fix for rare multicast join race condition") Signed-off-by:Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Feras Daoud authored
Update the broadcast address in the priv->broadcast object when the Pkey value changes in index 0, otherwise the multicast GID value will keep the previous value of the PKey, and will not be updated. This leads to interface state down because the interface will keep the old PKey value. For example, in SR-IOV environment, if the PF changes the value of PKey index 0 for one of the VFs, then the VF receives PKey change event that triggers heavy flush. This flush calls update_parent_pkey that update the broadcast object and its relevant members. If in this case the multicast GID will not be updated, the interface state will be down. Fixes: c2904141 ("IPoIB: Fix pkey change flow for virtualization environments") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
yonatanc authored
In RC QP there is no need to resolve the outgoing interface for each packet, as this does not change during QP life cycle. Instead cache the interface on the socket and use that one. This improves performance by 12% by sparing redundant calls to rxe_find_route. ib_send_bw -d rxe0 -x 1 -n 9000 -e -s $((1024 * 1024 )) -l 100 ---------------------------------------------------------------------------------------- | | bytes | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] | ---------------------------------------------------------------------------------------- | before | 1048576 | 9000 | inf | 551.21 | 0.000551 | | after | 1048576 | 9000 | inf | 615.54 | 0.000616 | ---------------------------------------------------------------------------------------- Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by:
-
yonatanc authored
Use CPU ability to perform CRC calculations, by replacing direct calls to crc32_le() with crypto_shash_updata(). The overall performance gain measured with ib_send_bw tool is 10% and it was tested on "Intel CPU ES-2660 v2 @ 2.20Ghz" CPU. ib_send_bw -d rxe0 -x 1 -n 9000 -e -s $((1024 * 1024 )) -l 100 --------------------------------------------------------------------------------------------- | | bytes | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] | --------------------------------------------------------------------------------------------- | crc32_le | 1048576 | 9000 | inf | 497.60 | 0.000498 | | CRC offload | 1048576 | 9000 | inf | 546.70 | 0.000547 | --------------------------------------------------------------------------------------------- Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Parav Pandit authored
Function rxe_rcv is used internally in RXE and don't need to be exported. This patch removes such export declaration. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Parav Pandit authored
This patch avoids RNR NAK timer and retransmit timer initialization and cleanup for non RC QPs (such as UD QP, GSI QP). Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Yonatan Cohen authored
Expose new counters using the get_hw_stats callback. We expose the following counters: +---------------------+----------------------------------------+ | Name | Description | |---------------------+----------------------------------------| |sent_pkts | number of sent pkts | |---------------------+----------------------------------------| |rcvd_pkts | number of received packets | |---------------------+----------------------------------------| |out_of_sequence | number of errors due to packet | | | transport sequence number | |---------------------+----------------------------------------| |duplicate_request | number of received duplicated packets. | | | A request that previously executed is | | | named duplicated. | |---------------------+----------------------------------------| |rcvd_rnr_err | number of received RNR by completer | |---------------------+----------------------------------------| |send_rnr_err | number of sent RNR by responder | |---------------------+----------------------------------------| |rcvd_seq_err | number of out of sequence packets | | | received | |---------------------+----------------------------------------| |ack_deffered | number of deferred handling of ack | | | packets. | |---------------------+----------------------------------------| |retry_exceeded_err | number of times retry exceeded | |---------------------+----------------------------------------| |completer_retry_err | number of times completer decided to | | | retry | |---------------------+----------------------------------------| |send_err | number of failed send packet | +---------------------+----------------------------------------+ Signed-off-by:
Andrew Boyer <andrew.boyer@dell.com> Signed-off-by:
-
Doug Ledford authored
A couple spots were missed in the original patch to implement this change. Add those spots. Fixes: a9a42886 (cxgb4: Convert PDBG to pr_debug) Signed-off-by:
-
- 20 Apr, 2017 19 commits
-
-
Markus Elfring authored
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of data types by pointer dereferences to make the corresponding size determinations a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a reference to the desired member as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* Pass a product for a call of the function "vmalloc_user" without storing it in an intermediate variable. * Delete the local variable "memsize" which became unnecessary with this refactoring. Signed-off-by:
-
Markus Elfring authored
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus reuse the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus reuse the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Joe Perches authored
Use a more typical logging style. Miscellanea: o Obsolete the c4iw_debug module parameter o Coalesce formats o Realign arguments Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Joe Perches authored
Convert printks to pr_<level> Miscellanea: o Coalesce formats o Realign arguments Signed-off-by:
-
Joe Perches authored
Using the normal mechanism, not an indirected one, is clearer. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by:
-
Joe Perches authored
Convert printks to pr_<level> Miscellanea: o Coalesce formats o Realign arguments Signed-off-by:
-
Erez Shitrit authored
IPoIB driver now uses the new set of callback functions. If the hardware provider supports the new ipoib_options implementation, the driver uses the callbacks in its data path flows, otherwise it uses the driver default implementation for all data flows in its code. The default implementation wasn't change and it is exactly as it was before introduction of acceleration support. Signed-off-by:
-
Erez Shitrit authored
Make ipoib_priv point to netdev_priv where the code calls netdev_priv. Signed-off-by:
-
Erez Shitrit authored
Change of function parameter name from qpn to be dqpn. Signed-off-by:
-
Erez Shitrit authored
This patch is preparing the netdev part at the IPoIB driver to be able to use the ipoib_options. It deals with the two flows from the .ndo: ipoib_open and ipoib_stop. The code is rearranged as follows: * All operations which deal with the hardware resources, (for example change QP state, post-receive etc.) are performed in one place. * All operations that are control oriented (like restart multicast task, start the reap_ah etc.) are performed in separate place. The functions that deal with the hardware resources now located at __ipoib_ib_dev_open for the ipoib_open flow and __ipoib_ib_dev_stop for ipoib_stop. Signed-off-by:
-
Erez Shitrit authored
This patch prepares init and teardown flows so we can call them through ipoib_options function pointers. It arranges that area of code as the following: * All operations which deal with the resource allocation/deletion are performed in one place. * All operations that are control oriented, meaning that they are not connected to a specific hardware, are performed in a separate place. The operations for allocation of hardware resources are now in the function ipoib_dev_init_default, and the deletion of all the resources are in ipoib_dev_uninit_default The only exception is the creation of the PD object, which is used both for resource allocation (create QP etc.) and for control flows like creating AH. It also does: * Move creation of rx_ring and tx_ring to be in the resources allocation area. * Move the function ipoib_ib_dev_open that does the open device to the control area instead of the dev_init which creates resources. Signed-off-by:
-
Niranjana Vishwanathapura authored
Add RDMA netdev interface to ib device structure allowing RDMA netdev devices to be allocated by ib clients. The idea is to allow to providers to optimize IPoIB data path. New struct that includes functions and data member is exposed. It exposes set of callback functions for handling data path flows in IPoIB driver. Each provider can support these set of functions in order to optimize its specific data path, and let IPoIB to leverage its data path. There is an assumption, that providers should give the full set of functions and not only part of them, in order to work properly. Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
-
Vishwanathapura, Niranjana authored
HFI1 VNIC SDMA support enables transmission of VNIC packets over SDMA. Map VNIC queues to SDMA engines and support halting and wakeup of the VNIC queues. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Vishwanathapura, Niranjana authored
HFI1 HW specific support for VNIC functionality. Dynamically allocate a set of contexts for VNIC when the first vnic port is instantiated. Allocate VNIC contexts from user contexts pool and return them back to the same pool while freeing up. Set aside enough MSI-X interrupts for VNIC contexts and assign them when the contexts are allocated. On the receive side, use an RSM rule to spread TCP/UDP streams among VNIC contexts. Reviewed-by:
Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by:
-
Vishwanathapura, Niranjana authored
Add support to create and free OPA_VNIC rdma netdev devices. Implement netstack interface functionality including xmit_skb, receive side NAPI etc. Also implement rdma netdev control functions. Reviewed-by:
-
