- 01 Dec, 2015 12 commits
-
-
Sudarsana Kalluru authored
Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Kalluru authored
Signed-off-by:
-
Sudarsana Kalluru authored
Signed-off-by:
-
Sudarsana Kalluru authored
Physical LEDs are being controlled by the management FW. This adds the qed functionality required to request management FW to change the LED configuration, as well as the necessary APIs for this functionality to later be used by the protocol drivers. Signed-off-by:
-
Sudarsana Kalluru authored
Signed-off-by:
-
Sudarsana Kalluru authored
Signed-off-by:
-
David S. Miller authored
Bert Kenward says: ==================== Basic support for Solarflare 8000 series NICs The upcoming Solarflare 8000 series 10G/40G network card supports a similar interface to the current 7000 series cards. This patch series provides basic support for these cards, making no use of any new functionality. v2: fix indenting in ef10.c in patch 1/2. ==================== Signed-off-by: -
Bert Kenward authored
Also add support for 7000 series 40G NIC VF. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Bert Kenward authored
The Solarflare 8000 series NIC will use a new TSO scheme. The current driver refuses to load if the current TSO scheme is not found. Remove that check and instead make the TSO version a per-queue parameter. Signed-off-by:
-
Nikolay Aleksandrov authored
This module allows to insert errors in some of netdevice's notifier events. All network drivers use these notifiers to signal various events and to check if they are allowed, e.g. PRECHANGEMTU and CHANGEMTU afterwards. Until recently I had to run failure tests by injecting a custom module, but now this infrastructure makes it trivial to test these failure paths. Some of the recent bugs I fixed were found using this module. Here's an example: $ cd /sys/kernel/debug/notifier-error-inject/netdev $ echo -22 > actions/NETDEV_CHANGEMTU/error $ ip link set eth0 mtu 1024 RTNETLINK answers: Invalid argument CC: Akinobu Mita <akinobu.mita@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev <netdev@vger.kernel.org> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Vitaly Kuznetsov authored
There are several issues in hv_netvsc driver with regards to link status change handling: - RNDIS_STATUS_NETWORK_CHANGE results in calling userspace helper doing '/etc/init.d/network restart' and this is inappropriate and broken for many reasons. - link_watch infrastructure only sends one notification per second and in case of e.g. paired disconnect/connect events we get only one notification with last status. This makes it impossible to handle such situations in userspace. Redo link status changes handling in the following way: - Create a list of reconfig events in network device context. - On a reconfig event add it to the list of events and schedule netvsc_link_change(). - In netvsc_link_change() ensure 2-second delay between link status changes. - Handle RNDIS_STATUS_NETWORK_CHANGE as a paired disconnect/connect event. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Rainer Weikusat authored
The current unix_dgram_recvmsg does a wake up for every received datagram. This seems wasteful as only SOCK_DGRAM client sockets in an n:1 association with a server socket will ever wait because of the associated condition. The patch below changes the function such that the wake up only happens if wq_has_sleeper indicates that someone actually wants to be notified. Testing with SOCK_SEQPACKET and SOCK_DGRAM socket seems to confirm that this is an improvment. Signed-Off-By:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by:
-
- 30 Nov, 2015 17 commits
-
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: ipmr: more cleanups and mfc netlink support This set continues with the minor cleanups in the first 6 patches and patch 7 adds the first new feature - MFC manipulation via netlink. It registers NEWROUTE/DELROUTE for that purpose and uses the same semantics as the already present netlink dump. The only new attribute that is used is RTA_PREFSRC to denote an MFC_PROXY entry. Currently the table must exist before adding an entry, and new tables can be created only via setsockopt, but that will be changed in the future. This set was tested with modified iproute2 which supports NEWROUTE/DELROUTE for RTNL_FAMILY_IPMR. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
This patch adds support to add and remove MFC entries. It uses the same attributes like the already present dump support in order to be consistent. There's one new entry - RTA_PREFSRC, it's used to denote an MFC_PROXY entry (see MRT_ADD_MFC vs MRT_ADD_MFC_PROXY). The already existing infrastructure is used to create and delete the entries, the netlink message gets converted internally to a struct mfcctl which is used with ipmr_mfc_add/delete. The other used attributes are: RTA_IIF - used for mfcc_parent (when adding it's required to be valid) RTA_SRC - used for mfcc_origin RTA_DST - used for mfcc_mcastgrp RTA_TABLE - the MRT table id RTA_MULTIPATH - the "oifs" ttl array Signed-off-by:
-
Nikolay Aleksandrov authored
We can have both errors and we'll return the second one, fix it to return an error at a time as it's normal. I've overlooked this in my previous set. Signed-off-by:
-
Nikolay Aleksandrov authored
Move the inline pimsm_enabled() to pim.h and rename it to ipmr_pimsm_enabled to show it's for the ipv4 ipmr code since pim.h is used by IPv6 too. Signed-off-by:
-
Nikolay Aleksandrov authored
Move the definitions of VIF_EXISTS() and struct mr_table to mroute.h Signed-off-by:
-
Nikolay Aleksandrov authored
Remove extra spaces and tabs, adjust function definitions, remove an unnecessary ifdef (already used below, just move code) and drop extern from the functions. Signed-off-by:
-
Nikolay Aleksandrov authored
MFC_NOTIFY was introduced in kernel 2.1.68 but afaik it hasn't been used and I couldn't find any users currently so just remove it. Only MFC_STATIC is left, so move it into an enum, add a description and use BIT(). Signed-off-by:
-
Nikolay Aleksandrov authored
It looks like many files are including mroute.h unnecessarily, so remove the include. Most importantly remove it from ipv6. CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: driver update This patchset carries support for port identification, monitoring of ASIC temperature and board fans. ==================== Signed-off-by: -
Jiri Pirko authored
ASIC provides access to fans. Implement their exposure to userspace using hwmon. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Add definition of MFCR, MFSC and MFSM which provide possibility to control and monitor fans. Signed-off-by:
-
Jiri Pirko authored
ASIC provides access to temperature sensors. Implement their exposure to userspace using hwmon. Signed-off-by:
-
Jiri Pirko authored
Add definition of MTCAP and MTMP registers which provide access to temperature sensors. Signed-off-by:
-
Ido Schimmel authored
Allow a user to flash the port's LED in order to identify it. This is achieved by setting the Management LED Control Register (MLCR). Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Add the MLCR register, which controls physical port identification LEDs. Signed-off-by:
-
Herbert Xu authored
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Add vendor directories (for example intel, marvell and so on) to drivers/net/wireless and change the menuconfig to follow the same categorisation. This unifies the directory layout as we already had few drivers already using vendor directories (especially ath and ti). ==================== Signed-off-by:
-
- 25 Nov, 2015 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-11-25 This series contains updates to fm10k, i40e and i40evf. Alex Duyck fixes up fm10k to use napi_schedule_irqoff() instead of napi_schedule() since the function it is called from runs from hard interrupt context or with interrupts already disabled in netpoll. Shannon cleans up i40e and i40evf unused cd_tunneling parameter and any code comments that refer to it. Then clean up a few instances of BUG_ON, based on a Linux diatribe, especially when WARN_ON can be used. Helin fixed a issue where using ethtool RXNFC command could let receive flow hash could be set on disabled queues, so resolve by returning the number of enabled queues before setting RXNFC. Anjali fixes a MSS issue where the hardware/NVM sets a limit of no less than 256 bytes for MSS, yet the stack can send as low as 76 byte MSS. Fixed the issue by lowering the hardware limit to 64 bytes to avoid MDDs from firing and causing a reset when the MSS is lower than 256. Added a statistic to track how many times we forced to do a write back on transmit if the number of descriptors pending are less than a cache line. Catherine fixes link status changes, where polling would only change link status changes in one direction depending on what the last old data saved off was. This was due to the watchdog only calling link_event and not handle_link_event. Mitch cleans up and enhances error messages related to VF MAC/VLAN filters. v2: Dropped patch "i40e: Properly cast type for arithmetic" patch based on feedback from the community ==================== Signed-off-by: -
Catherine Sullivan authored
Bump. Change-ID: I2d1ce93b2ce74e4eef2394c932aef52cba99713f Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Helin Zhang authored
This patch renames the old pf-specific function in order to clarify its scope. This patch also creates a more generic configure RSS function with the old name. This patch also creates a new more generic function to get RSS configuration, using the appropriate method. Change-ID: Ieddca2707b708ef19f1ebccdfd03a0a0cd63d3af Signed-off-by:
Helin Zhang <helin.zhang@intel.com> Tested-by:
-
Helin Zhang authored
Adjust the RSS configure functions so that there is a generic way to hook to ethtool hooks. Change-ID: If446e34fcfaf1bc3320d9d319829a095b5976e67 Signed-off-by:
-
Helin Zhang authored
This patch fixes a problem where using ethtool rxnfc command could let RX flow hash be set on disabled queues. This patch fixes the problem by returning the number of enabled queues before setting rxnfc. Change-ID: Idbac86b0b47ddacc8deee7cd257e41de01cbe5c0 Signed-off-by:
-
Mitch Williams authored
When a lot (many hundreds) of MAC or VLAN filters are added at one time, we can overflow the Admin Queue buffer size with all the requests. Unfortunately, the driver would then calculate the message size incorrectly, causing it to be rejected by the PF. Furthermore, there was no mechanism to trigger another request to allow for configuring the rest of the filters that didn't fit into the first request. To fix this, recalculate the correct buffer size when we detect the overflow condition instead of just assuming the max buffer size. Also, don't clear the request bit in adapter->aq_required when we have an overflow, so that the rest of the filters can be processed later. Change-ID: Idd7cbbc5af31315e0dcb1b10e6a02ad9817ce65c Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Clean up and enhance error messages related to VF MAC/VLAN filters. Indicate which VF is having issues, and if possible indicate the MAC address or VLAN involved. Also, when an error is returned from the PF driver, print useful information about what went wrong, for the most likely cases. Change-ID: Ib3d15eef9e3369a78fd142948671e5fa26d921b8 Signed-off-by:
-
Helin Zhang authored
Add a comment to the #endif to more easily match it with its #if. Change-ID: I47eb0a60a17dc6d2f01a930e45006d2dc82e044f Signed-off-by:
-
Catherine Sullivan authored
The watchdog only calls link_event not handle_link_event which means that we need to save the old information in link_event. Previously when polling we were comparing current data to the old data saved the last time we actually received a link event. This means that the polling would only fix link status changes in one direction depending on what the last old data saved off was. Change-ID: Ie590f30fdbcb133d0ddad4e07e3eb1aad58255b3 Signed-off-by:
-
Anjali Singhai Jain authored
When in NAPI with interrupts disabled, the HW needs to be forced to do a write back on TX if the number of descriptors pending are less than a cache line. This stat helps keep track of how many times we get into this situation. Change-ID: I76c1bcc7ebccd6bffcc5aa33bfe05f2fa1c9a984 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Anjali Singhai Jain authored
HW/NVM sets a limit of no less than 256 bytes for MSS. Stack can send as low as 76 bytes MSS. This patch lowers the HW limit to 64 bytes to avoid MDDs from firing and causing a reset when the MSS is lower than 256. Change-ID: I36b500a6bb227d283c3e321a7718e0672b11fab0 Signed-off-by:
-
