Actually after netlink_skb_clone() is called, the nskb and
skb will point to the same thing, but they are used just like
they are different, sometimes this is confusing, so i think
there is no necessary to keep nskb anymore.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@soleta.eu>

sizeof(char) is always 1.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Invert logic in test to use continue.

This routine already uses continue, use it a bit more to
minimize > 80 column long lines and unnecessary indentation.

No change in compiled object file.

Other miscellanea:

o Remove trailing whitespace
o Realign arguments to multiline statement
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Manually bumping either nf_conntrack_buckets or nf_conntrack_max has
become a common task as our Linux servers tend to serve more and more
clients/applications, so let's adjust nf_conntrack_buckets this to a
more updated value.

Now for systems with more than 4GB of memory, nf_conntrack_buckets
becomes 65536 instead of 16384, resulting in nf_conntrack_max=256k
entries.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull another networking update from David Miller:
 "Small follow-up to the main merge pull from the other day:

  1) Alexander Duyck's DMA memory barrier patch set.

  2) cxgb4 driver fixes from Karen Xie.

  3) Add missing export of fixed_phy_register() to modules, from Mark
     Salter.

  4) DSA bug fixes from Florian Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  net/macb: add TX multiqueue support for gem
  linux/interrupt.h: remove the definition of unused tasklet_hi_enable
  jme: replace calls to redundant function
  net: ethernet: davicom: Allow to select DM9000 for nios2
  net: ethernet: smsc: Allow to select SMC91X for nios2
  cxgb4: Add support for QSA modules
  libcxgbi: fix freeing skb prematurely
  cxgb4i: use set_wr_txq() to set tx queues
  cxgb4i: handle non-pdu-aligned rx data
  cxgb4i: additional types of negative advice
  cxgb4/cxgb4i: set the max. pdu length in firmware
  cxgb4i: fix credit check for tx_data_wr
  cxgb4i: fix tx immediate data credit check
  net: phy: export fixed_phy_register()
  fib_trie: Fix trie balancing issue if new node pushes down existing node
  vlan: Add ability to always enable TSO/UFO
  r8169:update rtl8168g pcie ephy parameter
  net: dsa: bcm_sf2: force link for all fixed PHY devices
  fm10k/igb/ixgbe: Use dma_rmb on Rx descriptor reads
  r8169: Use dma_rmb() and dma_wmb() for DescOwn checks
  ...

Pull IDE update from David Miller:
 "Two small IDE layer adjustments"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers: ide: Fix mostly harmless off-by-one hardcoded value
  IDE: Deletion of an unnecessary check before the function call "module_put"

Pull sparc update from David Miller:
 "Not a lot of stuff this time around, mostly bug fixing:

   - Fix alignment of 32-bit crosscall datastructure on Leon, from
     Andreas Larsson.

   - Several fixes to the virtual disk driver on sparc64 by Dwight
     Engen, including handling resets of the service domain properly"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sunvdc: reconnect ldc after vds service domain restarts
  sparc/ldc: create separate ldc_unbind from ldc_free
  vio: create routines for inc,dec vio dring indexes
  sunvdc: fix module unload/reload
  sparc32, leon: Align ccall_info to prevent unaligned traps on crosscall

Ralf Baechle says:
 "This should have been part of the merge commit c0222ac0 (Merge
  branch 'upstream' of git://git.linux-mips.org/pub/scm/-
  ralf/upstream-linus) but I forgot to mention the need for this in my
  pull request"
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM updates from Russell King:
 "The major updates included in this update are:

   - Clang compatible stack pointer accesses by Behan Webster.
   - SA11x0 updates from Dmitry Eremin-Solenikov.
   - kgdb handling of breakpoints with read-only text/modules
   - Support for Privileged-no-execute feature on ARMv7 to prevent
     userspace code execution by the kernel.
   - AMBA primecell bus handling of irq-safe runtime PM
   - Unwinding support for memset/memzero/memmove/memcpy functions
   - VFP fixes for Krait CPUs and improvements in detecting the VFP
     architecture
   - A number of code cleanups (using pr_*, removing or reducing the
     severity of a couple of kernel messages, splitting ftrace asm code
     out to a separate file, etc.)
   - Add machine name to stack dump output"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits)
  ARM: 8247/2: pcmcia: sa1100: make use of device clock
  ARM: 8246/2: pcmcia: sa1111: provide device clock
  ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks
  ARM: 8244/1: fbdev: sa1100fb: make use of device clock
  ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device
  ARM: 8242/1: sa1100: add cpu clock
  ARM: 8221/1: PJ4: allow building in Thumb-2 mode
  ARM: 8234/1: sa1100: reorder IRQ handling code
  ARM: 8233/1: sa1100: switch to hwirq usage
  ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain
  ARM: 8231/1: sa1100: introduce irqdomains support
  ARM: 8230/1: sa1100: shift IRQs by one
  ARM: 8229/1: sa1100: replace irq numbers with names in irq driver
  ARM: 8228/1: sa1100: drop entry-macro.S
  ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER
  ARM: 8241/1: Update processor_modes for hyp and monitor mode
  ARM: 8240/1: MCPM: document mcpm_sync_init()
  ARM: 8239/1: Introduce {set,clear}_pte_bit
  ARM: 8238/1: mm: Refine set_memory_* functions
  ARM: 8237/1: fix flush_pfn_alias
  ...

Pull IOMMU updates from Joerg Roedel:
 "This time with:

   - A new IOMMU-API call: iommu_map_sg() to map multiple non-contiguous
     pages into an IO address space with only one API call.  This allows
     certain optimizations in the IOMMU driver.

   - DMAR device hotplug in the Intel VT-d driver.  It is now possible
     to hotplug the IOMMU itself.

   - A new IOMMU driver for the Rockchip ARM platform.

   - Couple of cleanups and improvements in the OMAP IOMMU driver.

   - Nesting support for the ARM-SMMU driver.

   - Various other small cleanups and improvements.

  Please note that this time some branches were also pulled into other
  trees, like the DRI and the Tegra tree.  The VT-d branch was also
  pulled into tip/x86/apic.

  Some patches for the AMD IOMMUv2 driver are not in the IOMMU tree but
  were merged by Andrew (or finally ended up in the DRI tree)"

* tag 'iommu-updates-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
  iommu: Decouple iommu_map_sg from CPU page size
  iommu/vt-d: Fix an off-by-one bug in __domain_mapping()
  pci, ACPI, iommu: Enhance pci_root to support DMAR device hotplug
  iommu/vt-d: Enhance intel-iommu driver to support DMAR unit hotplug
  iommu/vt-d: Enhance error recovery in function intel_enable_irq_remapping()
  iommu/vt-d: Enhance intel_irq_remapping driver to support DMAR unit hotplug
  iommu/vt-d: Search for ACPI _DSM method for DMAR hotplug
  iommu/vt-d: Implement DMAR unit hotplug framework
  iommu/vt-d: Dynamically allocate and free seq_id for DMAR units
  iommu/vt-d: Introduce helper function dmar_walk_resources()
  iommu/arm-smmu: add support for DOMAIN_ATTR_NESTING attribute
  iommu/arm-smmu: Play nice on non-ARM/SMMU systems
  iommu/amd: remove compiler warning due to IOMMU_CAP_NOEXEC
  iommu/arm-smmu: add IOMMU_CAP_NOEXEC to the ARM SMMU driver
  iommu: add capability IOMMU_CAP_NOEXEC
  iommu/arm-smmu: change IOMMU_EXEC to IOMMU_NOEXEC
  iommu/amd: Fix accounting of device_state
  x86/vt-d: Fix incorrect bit operations in setting values
  iommu/rockchip: Allow to compile with COMPILE_TEST
  iommu/ipmmu-vmsa: Return proper error if devm_request_irq fails
  ...

Pull dmaengine updates from Vinod Koul:
 "Main features this time are:

   - BAM v1.3.0 support form qcom bam dma
   - support for Allwinner sun8i dma
   - atmels eXtended DMA Controller driver
   - chancnt cleanup by Maxime
   - fixes spread over drivers"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits)
  dmaenegine: Delete a check before free_percpu()
  dmaengine: ioatdma: fix dma mapping errors
  dma: cppi41: add a delay while setting the TD bit
  dma: cppi41: wait longer for the HW to return the descriptor
  dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model
  dmaengine: fsl-edma: fix calculation of remaining bytes
  drivers/dma/pch_dma: declare pch_dma_id_table as static
  dmaengine: ste_dma40: fix error return code
  dma: imx-sdma: clarify about firmware not found error
  Documentation: devicetree: Fix Xilinx VDMA specification
  dmaengine: pl330: update author info
  dmaengine: clarify the issue_pending expectations
  dmaengine: at_xdmac: Add DMA_PRIVATE
  ARM: dts: at_xdmac: fix bad value of dma-cells in documentation
  dmaengine: at_xdmac: fix missing spin_unlock
  dmaengine: at_xdmac: fix a bug in transfer residue computation
  dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status()
  dmaengine: at_xdmac: remove chancnt affectation
  dmaengine: at_xdmac: prefer usage of readl/writel_relaxed
  dmaengine: xdmac: fix print warning on dma_addr_t variable
  ...

Pull IPMI driver updates from Corey Minyard:
  - Quite a few bug fixes
  - A new driver for the powernv
  - A new driver for the SMBus interface from the IPMI 2.0 specification

* tag 'for-linus' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Check the BT interrupt enable periodically
  ipmi: Fix attention handling for system interfaces
  ipmi: Periodically check to see if irqs and messages are set right
  drivers/char/ipmi: Add powernv IPMI driver
  ipmi: Add SMBus interface driver (SSIF)
  ipmi: Remove the now unused priority from SMI sender
  ipmi: Remove the now unnecessary message queue
  ipmi: Make the message handler easier to use for SMI interfaces
  ipmi: Move message sending into its own function
  ipmi: rename waiting_msgs to waiting_rcv_msgs
  ipmi: Fix handling of BMC flags
  ipmi: Initialize BMC device attributes
  ipmi: Unregister previously registered driver in error case
  ipmi: Use the proper type for acpi_handle
  ipmi: Fix a bug in hot add/remove
  ipmi: Remove useless sysfs_name parameters
  ipmi: clean up the device handling for the bmc device
  ipmi: Move the address source to string to ipmi-generic code
  ipmi: Ignore SSIF in the PNP handling

Pull documentation update from Jonathan Corbet:
 "Here's my set of accumulated documentation changes for 3.19.

  It includes a couple of additions to the coding style document, some
  fixes for minor build problems within the documentation tree, the
  relocation of the kselftest docs, and various tweaks and additions.

  A couple of changes reach outside of Documentation/; they only make
  trivial comment changes and I did my best to get the required acks.

  Complete with a shiny signed tag this time around"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
  kobject: grammar fix
  Input: xpad - update docs to reflect current state
  Documentation: Build mic/mpssd only for x86_64
  cgroups: Documentation: fix wrong cgroupfs paths
  Documentation/email-clients.txt: add info about Claws Mail
  CodingStyle: add some more error handling guidelines
  kselftest: Move the docs to the Documentation dir
  Documentation: fix formatting to make 's' happy
  Documentation: power: Fix typo in Documentation/power
  Documentation: vm: Add 1GB large page support information
  ipv4: add kernel parameter tcpmhash_entries
  Documentation: Fix a typo in mailbox.txt
  treewide: Fix typo in Documentation/DocBook/device-drivers
  CodingStyle: Add a chapter on conditional compilation

The string "IOMEGA Clik!" has length 12, not 11. Using strstarts
avoids the error-prone hardcoding of the prefix length. For
consistency, also change the occurence just above.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cyrille Pitchen says:

====================
net/macb: add TX multiqueue support for gem

ChangeLog

v3:
- reduce the number of added #define in macb.h
- simplify the queue initialization
- add some more comments
- use "hw_q" index when dealing with the hardware queue mask and "q" index for
  linux (software) queue index in "for" loops

v2:
fix compilation warnings for netdev_vdbg("%u...", queue - bp->queues, ...) calls

v1:
At the first look this patch may look quite big but it cannot be splitted.
Each queue has its own dedicated IRQ, which should be handled.
Also the Transmit Base Queue Pointer register of each available queue must be
initialized before starting the transmission, otherwise the transmission will be
halted immediately as HRESP errors are likely to occur.
In addition, some fields had to be moved from struct macb into struct macb_queue
so a common code could manage the queues.

This patch was applied to net-next and tested on a sama5d36ek board, which embeds
both macb and gem IPs, to check the backward compatibility.

Also it was tested on a sama5dx FPGA platform with a gem designed to use 3 queues.
Then we used the tc program to set a queue discipline policy as describe in the
Documentation/networking/multiqueue.txt: we successfully used each queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

gem devices designed with multiqueue CANNOT work without this patch.

When probing a gem device, the driver must first prepare and enable the
peripheral clock before accessing I/O registers. The second step is to read the
MID register to find whether the device is a gem or an old macb IP.
For gem devices, it reads the Design Configuration Register 6 (DCFG6) to
compute to total number of queues, whereas macb devices always have a single
queue.
Only then it can call alloc_etherdev_mq() with the correct number of queues.
This is the reason why the order of some initializations has been changed in
macb_probe().
Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized
for each queue.

For backward compatibility reasons, queue0 uses the legacy registers ISR, IER,
IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers
ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7].
Except this hardware detail there is no real difference between queue0 and the
others. The driver hides that thanks to the struct macb_queue.
This structure allows us to share a common set of functions for all the queues.

Besides when a TX error occurs, the gem MUST be halted before writing any of
the TBQP registers to reset the relevant queue. An immediate side effect is
that the other queues too aren't processed anymore by the gem.
So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux
network engine that all transmissions are stopped.

Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the
interrupt handlers of the other queues from running as each of them may wake
its associated queue up (please refer to macb_tx_interrupt()).

Finally, as all queues have previously been stopped, they should be restarted
calling netif_tx_start_all_queues() and setting the TSTART bit into the Network
Control Register. Before this patch, when dealing with a single queue, the
driver used to defer the reset of the faulting queue and the write of the
TSTART bit until the next call of macb_start_xmit().
As explained before, this bit is now set by macb_tx_error_task() too. That's
why the faulting queue MUST be reset by setting the TX_USED bit in its first
buffer descriptor before writing the TSTART bit.

Queue 0 always exits and is the lowest priority when other queues are available.
The higher the index of the queue is, the higher its priority is.

When transmitting frames, the TX queue is selected by the skb->queue_mapping
value. So queue discipline can be used to define the queue priority policy.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Quentin Lambert says:

====================
Remove redundant function

tasklet_hi_enable and tasklet_enable are redundant. Since
tasklet_hi_enable is used only 6 times in 1 file, the first
patch changes calls to the function with calls to tasklet_enable.

The second patch removes tasklet_hi_enable definition.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calls to tasklet_hi_enable are replaced by calls to
tasklet_enable since the 2 functions are redundant.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pstore update #2 from Tony Luck:
 "Couple of pstore-ram enhancements to allow use of different memory
  attributes"

* tag 'please-pull-morepstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore-ram: Allow optional mapping with pgprot_noncached
  pstore-ram: Fix hangs by using write-combine mappings

Pull btrfs update from Chris Mason:
 "From a feature point of view, most of the code here comes from Miao
  Xie and others at Fujitsu to implement scrubbing and replacing devices
  on raid56.  This has been in development for a while, and it's a big
  improvement.

  Filipe and Josef have a great assortment of fixes, many of which solve
  problems corruptions either after a crash or in error conditions.  I
  still have a round two from Filipe for next week that solves
  corruptions with discard and block group removal"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits)
  Btrfs: make get_caching_control unconditionally return the ctl
  Btrfs: fix unprotected deletion from pending_chunks list
  Btrfs: fix fs mapping extent map leak
  Btrfs: fix memory leak after block remove + trimming
  Btrfs: make btrfs_abort_transaction consider existence of new block groups
  Btrfs: fix race between writing free space cache and trimming
  Btrfs: fix race between fs trimming and block group remove/allocation
  Btrfs, replace: enable dev-replace for raid56
  Btrfs: fix freeing used extents after removing empty block group
  Btrfs: fix crash caused by block group removal
  Btrfs: fix invalid block group rbtree access after bg is removed
  Btrfs, raid56: fix use-after-free problem in the final device replace procedure on raid56
  Btrfs, replace: write raid56 parity into the replace target device
  Btrfs, replace: write dirty pages into the replace target device
  Btrfs, raid56: support parity scrub on raid56
  Btrfs, raid56: use a variant to record the operation type
  Btrfs, scrub: repair the common data on RAID5/6 if it is corrupted
  Btrfs, raid56: don't change bbio and raid_map
  Btrfs: remove unnecessary code of stripe_index assignment in __btrfs_map_block
  Btrfs: remove noused bbio_ret in __btrfs_map_block in condition
  ...

Pull HID updates from Jiri Kosina:
 - i2c-hid race condition fix from Jean-Baptiste Maneyrol
 - Logitech driver now supports vendor-specific HID++ protocol, allowing
   us to deliver a full multitouch support on wider range of Logitech
   touchpads.  Written by Benjamin Tissoires
 - MS Surface Pro 3 Type Cover support added by Alan Wu
 - RMI touchpad support improvements from Andrew Duggan
 - a lot of updates to Wacom driver from Jason Gerecke and Ping Cheng
 - various small fixes all over the place

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (56 commits)
  HID: rmi: The address of query8 must be calculated based on which query registers are present
  HID: rmi: Check for additional ACM registers appended to F11 data report
  HID: i2c-hid: prevent buffer overflow in early IRQ
  HID: logitech-hidpp: disable io in probe error path
  HID: logitech-hidpp: add boundary check for name retrieval
  HID: logitech-hidpp: check name retrieval return code
  HID: logitech-hidpp: do not return the name length
  HID: wacom: Report input events for each finger on generic devices
  HID: wacom: Initialize MT slots for generic devices at post_parse_hid
  HID: wacom: Update maximum X/Y accounding to outbound offset
  HID: wacom: Add support for DTU-1031X
  HID: wacom: add defines for new Cintiq and DTU outbound tracking
  HID: wacom: fix freeze on open when autosuspend is on
  HID: wacom: re-add accidentally dropped Lenovo PID
  HID: make hid_report_len as a static inline function in hid.h
  HID: wacom: Consult the application usage when determining field type
  HID: wacom: PAD is independent with pen/touch
  HID: multitouch: Add quirk for VTL touch panels
  HID: i2c-hid: fix race condition reading reports
  HID: wacom: Add angular resolution data to some ABS axes
  ...

Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...

Pull UBI/UBIFS updates from Artem Bityutskiy:
 "This includes the following UBI/UBIFS changes:
   - UBI debug messages now include the UBI device number.  This change
     is responsible for the big diffstat since it touched every
     debugging print statement.
   - An Xattr bug-fix which fixes SELinux support
   - Several error path fixes in UBI/UBIFS"

* tag 'upstream-3.19-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Fix invalid vfree()
  UBI: Fix double free after do_sync_erase()
  UBIFS: fix a couple bugs in UBIFS xattr length calculation
  UBI: vtbl: Use ubi_eba_atomic_leb_change()
  UBI: Extend UBI layer debug/messaging capabilities
  UBIFS: fix budget leak in error path

Pull xfs update from Dave Chinner:
 "There's relatively little change in this update; it is mainly bug
  fixes, cleanups and more of the on-going libxfs restructuring and
  on-disk format header consolidation work.

  Details:
   - more on-disk format header consolidation
   - move some structures shared with userspace to libxfs
   - new per-mount workqueue to fix for deadlocks between nested loop
     mounted filesystems
   - various bug fixes for ENOSPC, stats, quota off and preallocation
   - a bunch of compiler warning fixes for set-but-unused variables
   - various code cleanups"

* tag 'xfs-for-linus-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (24 commits)
  xfs: split metadata and log buffer completion to separate workqueues
  xfs: fix set-but-unused warnings
  xfs: move type conversion functions to xfs_dir.h
  xfs: move ftype conversion functions to libxfs
  xfs: lobotomise xfs_trans_read_buf_map()
  xfs: active inodes stat is broken
  xfs: cleanup xfs_bmse_merge returns
  xfs: cleanup xfs_bmse_shift_one goto mess
  xfs: fix premature enospc on inode allocation
  xfs: overflow in xfs_iomap_eof_align_last_fsb
  xfs: fix simple_return.cocci warning in xfs_bmse_shift_one
  xfs: fix simple_return.cocci warning in xfs_file_readdir
  libxfs: fix simple_return.cocci warnings
  xfs: remove unnecessary null checks
  xfs: merge xfs_inum.h into xfs_format.h
  xfs: move most of xfs_sb.h to xfs_format.h
  xfs: merge xfs_ag.h into xfs_format.h
  xfs: move acl structures to xfs_format.h
  xfs: merge xfs_dinode.h into xfs_format.h
  xfs: catch invalid negative blknos in _xfs_buf_find()
  ...

Pull ext4 updates from Ted Ts'o:
 "Lots of bugs fixes, including Zheng and Jan's extent status shrinker
  fixes, which should improve CPU utilization and potential soft lockups
  under heavy memory pressure, and Eric Whitney's bigalloc fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
  ext4: ext4_da_convert_inline_data_to_extent drop locked page after error
  ext4: fix suboptimal seek_{data,hole} extents traversial
  ext4: ext4_inline_data_fiemap should respect callers argument
  ext4: prevent fsreentrance deadlock for inline_data
  ext4: forbid journal_async_commit in data=ordered mode
  jbd2: remove unnecessary NULL check before iput()
  ext4: Remove an unnecessary check for NULL before iput()
  ext4: remove unneeded code in ext4_unlink
  ext4: don't count external journal blocks as overhead
  ext4: remove never taken branch from ext4_ext_shift_path_extents()
  ext4: create nojournal_checksum mount option
  ext4: update comments regarding ext4_delete_inode()
  ext4: cleanup GFP flags inside resize path
  ext4: introduce aging to extent status tree
  ext4: cleanup flag definitions for extent status tree
  ext4: limit number of scanned extents in status tree shrinker
  ext4: move handling of list of shrinkable inodes into extent status code
  ext4: change LRU to round-robin in extent status tree shrinker
  ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
  ext4: fix block reservation for bigalloc filesystems
  ...

This chip is present on older revisions of the DE2 development kit.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This chip is present on the Nios2 Development Kit 2C35.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware 1.12.25.0 added support for QSA module, adding the driver code for it.
Also fixes some ethtool get settings for other module types.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Karen Xie says:

====================
cxgb4/cxgbi: misc. fixes for cxgb4i

This patch set fixes cxgb4i's tx credit calculation and adds handling of
additional rx message and negative advice types. It also removes the duplicate
code in cxgb4i to set the outgoing queues of a packet.

Karen Xie (7):
cxgb4i: fix tx immediate data credit check
cxgb4i: fix credit check for tx_data_wr
cxgb4/cxgb4i: set max. outgoing pdu length in the f/w
cxgb4i: add more types of negative advice
cxgb4i: handle non pdu-aligned rx data
cxgb4i: use cxgb4's set_wr_txq() for setting outgoing queues
libcxgbi: fix the debug print accessing skb after it is freed

Sending to net as the fixes are mostly in the network area and it touches
cxgb4's header file (t4fw_api.h).

v2 corrects the "CHECK"s flagged by checkpatch.pl --strict.

v3 splits the 3rd patch from v2 to two separate patches. Adds detailed commit
messages and makes subject more concise. Patch 3/6 also changes the return
value of is_neg_adv() from int to bool.

v4 -- please ignore.

v5 splits the 1st patch from v3 to two separate patches and reduces code
duplication in make_tx_data_wr().

v6 removed the code style cleanup in the 2nd patch. The style update will be
addressed in a separate patch.

v7 updates the 7th patch with more detailed commit message.

v8 removes the duplicate subject lines from the message bodies.

v9 reformatted the commit messages to be max. 80 characters per line.

v10 rebased to net-next tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With debug turned on the debug print would access the skb after it is freed.
Fix it to free the skb after the debug print.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

use cxgb4's set_wr_txq() for setting of the tx queue for a outgoing packet.
remove the similar function in cxgb4i.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Abort the connection upon receiving of cpl_rx_data, which means the pdu cannot
be recovered from the tcp stream. This generally is due to pdu header
corruption.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Treat both CPL_ERR_KEEPALV_NEG_ADVICE and CPL_ERR_PERSIST_NEG_ADVICE as
negative advice.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Programs the firmware of the maximum outgoing iscsi pdu length per connection.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

make sure any tx credit related checking is done before adding the wr header.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only data skbs need the wr header added while control skbs do not. Make sure
they are treated differently.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building the bcmgenet driver as module, I get:

ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/genet/genet.ko] undefined!

commit b0ba512e225d72 ("net: bcmgenet: enable driver to work without device
tree") which added a call to fixed_phy_register. But fixed_phy_register
needs to be exported if used from a module.
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch addresses an issue with the level compression of the fib_trie.
Specifically in the case of adding a new leaf that triggers a new node to
be added that takes the place of the old node.  The result is a trie where
the 1 child tnode is on one side and one leaf is on the other which gives
you a very deep trie.  Below is the script I used to generate a trie on
dummy0 with a 10.X.X.X family of addresses.

  ip link add type dummy
  ipval=184549374
  bit=2
  for i in `seq 1 23`
  do
    ifconfig dummy0:$bit $ipval/8
    ipval=`expr $ipval - $bit`
    bit=`expr $bit \* 2`
  done
  cat /proc/net/fib_triestat

Running the script before the patch:

	Local:
		Aver depth:     10.82
		Max depth:      23
		Leaves:         29
		Prefixes:       30
		Internal nodes: 27
		  1: 26  2: 1
		Pointers: 56
	Null ptrs: 1
	Total size: 5  kB

After applying the patch and repeating:

	Local:
		Aver depth:     4.72
		Max depth:      9
		Leaves:         29
		Prefixes:       30
		Internal nodes: 12
		  1: 3  2: 2  3: 7
		Pointers: 70
	Null ptrs: 30
	Total size: 4  kB

What this fix does is start the rebalance at the newly created tnode
instead of at the parent tnode.  This way if there is a gap between the
parent and the new node it doesn't prevent the new tnode from being
coalesced with any pre-existing nodes that may have been pushed into one
of the new nodes child branches.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>