- 10 Oct, 2019 19 commits
-
-
Kevin Barnett authored
Removed some unused manifest constants. Link: https://lore.kernel.org/r/157048752420.11757.3464951542864727227.stgit@brunhildaReviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Signed-off-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Kevin Barnett authored
Obtain the unique IDs from the RLL and RPL instead of VPD page 83h. Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Link: https://lore.kernel.org/r/157048751247.11757.1727592925624138646.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Link: https://lore.kernel.org/r/157048750649.11757.7811056360633694725.stgit@brunhildaReviewed-by:
-
Murthy Bhat authored
Add support for a timeout on LUN resets. Link: https://lore.kernel.org/r/157048750055.11757.9689400788261610618.stgit@brunhildaReviewed-by:
Murthy Bhat <Murthy.Bhat@microsemi.com> Signed-off-by:
-
koshyaji authored
Add timeout field in RAID IU. Link: https://lore.kernel.org/r/157048749461.11757.10013040278241807855.stgit@brunhildaReviewed-by:
koshyaji <ajish.koshy@microsemi.com> Signed-off-by:
-
Murthy Bhat authored
Use sas_phy_delete rather than sas_phy_free which, according to comments, should not be called for PHYs that have been set up successfully. Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhildaReviewed-by:
-
Dan Carpenter authored
This line is indented too far so it's a bit confusing. Link: https://lore.kernel.org/r/20191004100615.GA823@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
zhengbin authored
Fix sparse warnings: drivers/scsi/lpfc/lpfc_nportdisc.c:290:1: warning: symbol 'lpfc_defer_pt2pt_acc' was not declared. Should it be static? Link: https://lore.kernel.org/r/1570183477-137273-1-git-send-email-zhengbin13@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Reviewed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Masahiro Yamada authored
Add a header include guard just in case. Link: https://lore.kernel.org/r/20190728164643.16335-1-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Himanshu Madhani authored
Link: https://lore.kernel.org/r/20190912180918.6436-15-hmadhani@marvell.comSigned-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Himanshu Madhani authored
Move messages to verbose logging for scan thread. Link: https://lore.kernel.org/r/20190912180918.6436-14-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
For MPI heartbeat stop Async Event, this patch would capture MPI FW dump and chip reset. FW will tell which function to capture FW dump for. Link: https://lore.kernel.org/r/20190912180918.6436-13-hmadhani@marvell.comReviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
Add mailbox timeout checkout for ISP 27xx/28xx during FW dump procedure. Without the timeout check, hardware lock can be held for long period. This patch would shorten the dump procedure if a timeout condition is encountered. Link: https://lore.kernel.org/r/20190912180918.6436-12-hmadhani@marvell.comReviewed-by:
-
Quinn Tran authored
During driver unload, the remove flag will be set for all scsi_qla_host/NPIV. This allows each NPIV to see the flag instead of reaching for base_vha to search for it. Link: https://lore.kernel.org/r/20190912180918.6436-11-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
Add error handling logic to ELS Passthrough relating to NVME devices. Current code does not parse error code to take proper recovery action, instead it re-logins with the same login parameters that encountered the error. Ex: nport handle collision. Link: https://lore.kernel.org/r/20190912180918.6436-10-hmadhani@marvell.comSigned-off-by:
-
Michael Hernandez authored
Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same WWN. The driver now offers a user option by way of NVRAM parameter to allow users to choose, on a per port basis, the kind of FC-4 type they would like to prioritize for login. Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.comSigned-off-by:
Michael Hernandez <mhernandez@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
The qla2xxx driver updates for 5.5 depend on the fixes queued for 5.4. Signed-off-by:
-
- 04 Oct, 2019 4 commits
-
-
Bart Van Assche authored
Maintaining tpg_list without ever iterating over it is not useful. Hence remove tpg_list. This patch does not change the behavior of the SCSI target code. Cc: Mike Christie <mchristie@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Link: https://lore.kernel.org/r/20190930232224.58980-1-bvanassche@acm.orgSigned-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Himanshu Madhani authored
Update maintainer entry for qla2xxx driver now that email addresses have been changed to Marvell. Link: https://lore.kernel.org/r/20191001153338.28765-1-hmadhani@marvell.comSigned-off-by:
-
Steffen Maier authored
On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior. User explanation of new kernel message: * Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #2.6.30+ Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.comReviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Damien Le Moal authored
When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried. Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
- 01 Oct, 2019 17 commits
-
-
YueHaibing authored
Fix sparse warning: drivers/scsi/bfa/bfad.c:1491:1: warning: symbol 'restart_bfa' was not declared. Should it be static? Link: https://lore.kernel.org/r/20190930094327.46836-1-yuehaibing@huawei.comReported-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Daniel Wagner authored
Commit 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path") introduced the WARN_ON_ONCE in qla2x00_status_cont_entry(). The assumption was that there is only one status continuations element. According to the firmware documentation it is possible that multiple status continuations are emitted by the firmware. Fixes: 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path") Link: https://lore.kernel.org/r/20190927073031.62296-1-dwagner@suse.de Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
Oliver Neukum authored
I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.comSigned-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Austin Kim authored
Since 'commit fc8d0590 ("libcxgbi: Add ipv6 api to driver")' was introduced, there is no call to csk_print_port() and csk_print_ip() is made. Hence kernel build with clang complains below message: drivers/scsi/cxgbi/libcxgbi.c:2287:19: warning: unused function 'csk_print_port' [-Wunused-function] static inline int csk_print_port(struct cxgbi_sock *csk, char *buf) ^ drivers/scsi/cxgbi/libcxgbi.c:2298:19: warning: unused function 'csk_print_ip' [-Wunused-function] static inline int csk_print_ip(struct cxgbi_sock *csk, char *buf) ^ Remove csk_print_port() and csk_print_ip() to stop warning. Link: https://lore.kernel.org/r/20190924093716.GA78230@LGEARND20B15Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
-
Ryan Attard authored
Add sysfs attributes for the ATA information page and Supported VPD Pages page. Link: https://lore.kernel.org/r/20190926162216.56591-1-ryanattard@ryanattard.infoSigned-off-by:
Ryan Attard <ryanattard@ryanattard.info> Reviewed-by:
-
Colin Ian King authored
There are some statements that are indented too deeply, remove the extraneous tabs and rejoin split lines. Link: https://lore.kernel.org/r/20190927095840.26377-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The goto statement is indented incorrectly, remove the extraneous tab. Link: https://lore.kernel.org/r/20190926115716.3698-1-colin.king@canonical.comSigned-off-by:
-
Milan P. Gandhi authored
Couple of users had requested to print the SCSI command age along with command failure errors. This is a small change, but allows users to get more important information about the command that was failed, it would help the users in debugging the command failures: Link: https://lore.kernel.org/r/20190926052501.GA8352@machine1Signed-off-by:
Milan P. Gandhi <mgandhi@redhat.com> Reviewed-by:
-
Daniel Wagner authored
Add qedf_get_host_port_id() to the transport template. The fc_transport_template initializes the port_id member to the default value of -1. The new getter ensures that the sysfs entry shows the current value and not the default one, e.g by using 'lsscsi -H -t' Link: https://lore.kernel.org/r/20190924072906.23737-1-dwagner@suse.deSigned-off-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
-
Stanley Chu authored
Enable auto suspend capability in MediaTek UFS driver. Link: https://lore.kernel.org/r/1568649411-5127-4-git-send-email-stanley.chu@mediatek.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Stanley Chu authored
Rework from previous work by: Sujit Reddy Thumma <sthumma@codeaurora.org> Override auto suspend tunables for UFS device LUNs during initialization so as to efficiently manage background operations and the power consumption. Link: https://lore.kernel.org/r/1568649411-5127-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Stanley Chu authored
Rework from previous work by: Sujit Reddy Thumma <sthumma@codeaurora.org> Until now the scsi mid-layer forbids runtime suspend till userspace enables it. This is mainly to quarantine some disks with broken runtime power management or have high latencies executing suspend resume callbacks. If the userspace doesn't enable the runtime suspend the underlying hardware will be always on even when it is not doing any useful work and thus wasting power. Some low-level drivers for the controllers can efficiently use runtime power management to reduce power consumption and improve battery life. Allow runtime suspend parameters override within the LLD itself instead of waiting for userspace to control the power management. Link: https://lore.kernel.org/r/1568649411-5127-2-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Colin Ian King authored
There is a spelling mistake in literal string. Fix it. Link: https://lore.kernel.org/r/20190916091706.32268-1-colin.king@canonical.comSigned-off-by:
-
Arkadiusz Drabczyk authored
Fix several spelling typos in comments in csio_hw.c. Link: https://lore.kernel.org/r/20190912172546.16489-1-arkadiusz@drabczyk.orgSigned-off-by:
Arkadiusz Drabczyk <arkadiusz@drabczyk.org> Signed-off-by:
-
Navid Emamdoost authored
In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to be released. Link: https://lore.kernel.org/r/20190910234417.22151-1-navid.emamdoost@gmail.comSigned-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known function. Generated by: scripts/coccinelle/api/ptr_ret.cocci [mkp: applied by hand] Link: https://lore.kernel.org/r/9e667f19-434e-ed30-78cb-9ddc6323c51e@web.deSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
-
Colin Ian King authored
Don't populate the array setup_attrs on the stack but instead make it static const. Makes the object code smaller by 180 bytes. Before: text data bss dec hex filename 2140 224 0 2364 93c drivers/scsi/ufs/ufshcd-dwc.o After: text data bss dec hex filename 1863 320 0 2183 887 drivers/scsi/ufs/ufshcd-dwc.o (gcc version 9.2.1, amd64) Link: https://lore.kernel.org/r/20190906170104.10450-1-colin.king@canonical.comSigned-off-by:
-
