- 11 Oct, 2013 5 commits
-
-
Ivan T. Ivanov authored
Allows MSM EHCI controller to be specified via device tree. Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Use struct usb_hcd::phy to hold USB PHY instance. Signed-off-by:
-
Joe Perches authored
These aren't necessary after switch and if blocks. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Peter Chen authored
Fixing the below dump: root@freescale ~$ modprobe g_serial g_serial gadget: Gadget Serial v2.4 g_serial gadget: g_serial ready BUG: sleeping function called from invalid context at /home/b29397/work/projects/upstream/usb/usb/drivers/base/power/runtime.c:952 in_atomic(): 1, irqs_disabled(): 128, pid: 805, name: modprobe 2 locks held by modprobe/805: #0: (udc_lock){+.+.+.}, at: [<7f000a74>] usb_gadget_probe_driver+0x44/0xb4 [udc_core] #1: (&(&ci->lock)->rlock){......}, at: [<7f033488>] ci_udc_start+0x94/0x110 [ci_hdrc] irq event stamp: 3878 hardirqs last enabled at (3877): [<806b6720>] _raw_spin_unlock_irqrestore+0x40/0x6c hardirqs last disabled at (3878): [<806b6474>] _raw_spin_lock_irqsave+0x2c/0xa8 softirqs last enabled at (3872): [<8002ec0c>] __do_softirq+0x1c8/0x2e8 softirqs last disabled at (3857): [<8002f180>] irq_exit+0xbc/0x110 CPU: 0 PID: 805 Comm: modprobe Not tainted 3.11.0-next-20130910+ #85 [<80016b94>] (unwind_backtrace+0x0/0xf8) from [<80012e0c>] (show_stack+0x20/0x24) [<80012e0c>] (show_stack+0x20/0x24) from [<806af554>] (dump_stack+0x9c/0xc4) [<806af554>] (dump_stack+0x9c/0xc4) from [<8005940c>] (__might_sleep+0xf4/0x134) [<8005940c>] (__might_sleep+0xf4/0x134) from [<803a04a4>] (__pm_runtime_resume+0x94/0xa0) [<803a04a4>] (__pm_runtime_resume+0x94/0xa0) from [<7f0334a4>] (ci_udc_start+0xb0/0x110 [ci_hdrc]) [<7f0334a4>] (ci_udc_start+0xb0/0x110 [ci_hdrc]) from [<7f0009b4>] (udc_bind_to_driver+0x5c/0xd8 [udc_core]) [<7f0009b4>] (udc_bind_to_driver+0x5c/0xd8 [udc_core]) from [<7f000ab0>] (usb_gadget_probe_driver+0x80/0xb4 [udc_core]) [<7f000ab0>] (usb_gadget_probe_driver+0x80/0xb4 [udc_core]) from [<7f008618>] (usb_composite_probe+0xac/0xd8 [libcomposite]) [<7f008618>] (usb_composite_probe+0xac/0xd8 [libcomposite]) from [<7f04b168>] (init+0x8c/0xb4 [g_serial]) [<7f04b168>] (init+0x8c/0xb4 [g_serial]) from [<800088e8>] (do_one_initcall+0x108/0x16c) [<800088e8>] (do_one_initcall+0x108/0x16c) from [<8008e518>] (load_module+0x1b00/0x20a4) [<8008e518>] (load_module+0x1b00/0x20a4) from [<8008eba8>] (SyS_init_module+0xec/0x100) [<8008eba8>] (SyS_init_module+0xec/0x100) from [<8000ec40>] (ret_fast_syscall+0x0/0x48) Signed-off-by:Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Peter Chen authored
After configuration, the host also possible sends bus reset at any time, at such situation, it will trigger below spinlock recursion dump. This commit unlocks the spinlock before calling gadget's disconnect. BUG: spinlock recursion on CPU#0, swapper/0/0 lock: 0xbf128014, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-next-20130910+ #106 [<80014e20>] (unwind_backtrace+0x0/0xec) from [<80011a6c>] (show_stack+0x10/0x14) [<80011a6c>] (show_stack+0x10/0x14) from [<805c143c>] (dump_stack+0x94/0xbc) [<805c143c>] (dump_stack+0x94/0xbc) from [<80282cf8>] (do_raw_spin_lock+0x16c/0x18c) [<80282cf8>] (do_raw_spin_lock+0x16c/0x18c) from [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<803cff88>] (ep_disable+0x24/0x110) [<803cff88>] (ep_disable+0x24/0x110) from [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) from [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) from [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) from [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) from [<803d1024>] (udc_irq+0x770/0xce4) [<803d1024>] (udc_irq+0x770/0xce4) from [<803cdcc0>] (ci_irq+0x98/0x164) [<803cdcc0>] (ci_irq+0x98/0x164) from [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) from [<8007ef64>] (handle_irq_event+0x3c/0x5c) [<8007ef64>] (handle_irq_event+0x3c/0x5c) from [<80081e98>] (handle_fasteoi_irq+0x98/0x168) [<80081e98>] (handle_fasteoi_irq+0x98/0x168) from [<8007e598>] (generic_handle_irq+0x28/0x3c) [<8007e598>] (generic_handle_irq+0x28/0x3c) from [<8000edf4>] (handle_IRQ+0x4c/0xb4) [<8000edf4>] (handle_IRQ+0x4c/0xb4) from [<800085bc>] (gic_handle_irq+0x28/0x5c) [<800085bc>] (gic_handle_irq+0x28/0x5c) from [<800125c0>] (__irq_svc+0x40/0x54) Exception stack(0x8083bf68 to 0x8083bfb0) bf60: 81533b80 00000000 00096234 8001d760 8088e12c 00000000 bf80: 8083a000 8083a000 8084290c 805cb414 808428ac 8083a000 00000001 8083bfb0 bfa0: 8000f138 8000f13c 60000013 ffffffff [<800125c0>] (__irq_svc+0x40/0x54) from [<8000f13c>] (arch_cpu_idle+0x30/0x3c) [<8000f13c>] (arch_cpu_idle+0x30/0x3c) from [<8005eb94>] (cpu_startup_entry+0xf4/0x148) [<8005eb94>] (cpu_startup_entry+0xf4/0x148) from [<807f1a2c>] (start_kernel+0x2c4/0x318) BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xbf128014, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-next-20130910+ #106 [<80014e20>] (unwind_backtrace+0x0/0xec) from [<80011a6c>] (show_stack+0x10/0x14) [<80011a6c>] (show_stack+0x10/0x14) from [<805c143c>] (dump_stack+0x94/0xbc) [<805c143c>] (dump_stack+0x94/0xbc) from [<80282c94>] (do_raw_spin_lock+0x108/0x18c) [<80282c94>] (do_raw_spin_lock+0x108/0x18c) from [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<803cff88>] (ep_disable+0x24/0x110) [<803cff88>] (ep_disable+0x24/0x110) from [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) from [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) from [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) from [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) from [<803d1024>] (udc_irq+0x770/0xce4) [<803d1024>] (udc_irq+0x770/0xce4) from [<803cdcc0>] (ci_irq+0x98/0x164) [<803cdcc0>] (ci_irq+0x98/0x164) from [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) from [<8007ef64>] (handle_irq_event+0x3c/0x5c) [<8007ef64>] (handle_irq_event+0x3c/0x5c) from [<80081e98>] (handle_fasteoi_irq+0x98/0x168) [<80081e98>] (handle_fasteoi_irq+0x98/0x168) from [<8007e598>] (generic_handle_irq+0x28/0x3c) [<8007e598>] (generic_handle_irq+0x28/0x3c) from [<8000edf4>] (handle_IRQ+0x4c/0xb4) [<8000edf4>] (handle_IRQ+0x4c/0xb4) from [<800085bc>] (gic_handle_irq+0x28/0x5c) [<800085bc>] (gic_handle_irq+0x28/0x5c) from [<800125c0>] (__irq_svc+0x40/0x54) Exception stack(0x8083bf68 to 0x8083bfb0) bf60: 81533b80 00000000 00096234 8001d760 8088e12c 00000000 bf80: 8083a000 8083a000 8084290c 805cb414 808428ac 8083a000 00000001 8083bfb0 bfa0: 8000f138 8000f13c 60000013 ffffffff [<800125c0>] (__irq_svc+0x40/0x54) from [<8000f13c>] (arch_cpu_idle+0x30/0x3c) [<8000f13c>] (arch_cpu_idle+0x30/0x3c) from [<8005eb94>] (cpu_startup_entry+0xf4/0x148) [<8005eb94>] (cpu_startup_entry+0xf4/0x148) from [<807f1a2c>] (start_kernel+0x2c4/0x318) Signed-off-by:
-
- 07 Oct, 2013 6 commits
-
-
Dan Carpenter authored
"old_rdtodo" and "size" are short type. They are type promoted to int and the condition is never true. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Deng-Cheng Zhu authored
In addition to the error statuses -ETIMEDOUT and -EPIPE, uhci_hub_control() needs to return the length of copied buffer when appropriate, so that the returned status of ->hub_control() in rh_call_control() in the USB core HCD can be properly handled. This patch also removes the OK() macro to make the code more readable. Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
-
Thomas Pugliese authored
This patch fixes compile warnings on 64-bit builds that were introduced by the recent isoc changes. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reported-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Greg Kroah-Hartman authored
We want the USB fixes in this branch as well. Signed-off-by:
-
- 06 Oct, 2013 24 commits
-
-
Linus Torvalds authored
-
Eric W. Biederman authored
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Reported-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02 -
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
-
Matthias Beyer authored
Put else keyword on same line as closing brace from if statement, added { } braces as the styleguide says. Signed-off-by:Matthias Beyer <mail@beyermatthias.de> Signed-off-by:
-
Matthias Beyer authored
Signed-off-by:
-
Matthias Beyer authored
Signed-off-by:
-
Matthias Beyer authored
including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by:
-
Matthias Beyer authored
instead of type Signed-off-by:
-
Deng-Cheng Zhu authored
Now that UHCI IO registers have been defined in uhci-hcd.h, use them. Reviewed-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-spear glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-spear suspend scenario. Calling explicitly the ohci_suspend() routine in spear_ohci_hcd_drv_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by:
Manjunath Goudar <csmanjuvijay@gmail.com> Acked-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-sm501 glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-sm501 suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_sm501_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-pxa27x glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-pxa27x suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_hcd_pxa27x_drv_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-platform glue was not properly handled as it was not suspending generic part of ohci controller.Alan Stern suggested, properly handle ohci-platform suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_platform_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-omap glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-omap suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_omap_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-exynos glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-exynos suspend scenario. Calling explicitly the ohci_suspend() routine in exynos_ohci_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-ep93xx glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-ep93xx suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_hcd_ep93xx_drv_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-da8xx glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-da8xx suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_da8xx_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-s3c2410 glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-s3c2410 suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_hcd_s3c2410_drv_suspend() will ensure proper handling of suspend scenario. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of ohci-at91 glue was not properly handled as it was not suspending generic part of ohci controller. Alan Stern suggested, properly handle ohci-at91 suspend scenario. Calling explicitly the ohci_suspend() routine in ohci_hcd_at91_drv_suspend() will ensure proper handling of suspend scenario. This task is sugested by Alan Stern. Signed-off-by:
-
Manjunath Goudar authored
Suspend scenario in case of OHCI was not properly handled in ochi_suspend()routine. Alan Stern suggested, properly handle OHCI suspend scenario. This does generic proper handling of suspend scenario to all OHCI SOC. Signed-off-by:
-
David Cohen authored
If USB_FUNCTIONFS is selected without USB_FUNCTIONFS_ETH and USB_FUNCTIONFS_RNIS, u_ether.h won't be included and then USB_ETHERNET_MODULE_PARAMAETERS macro won't be available causing the following warning compilation: drivers/usb/gadget/g_ffs.c:81:1: warning: data definition has no type or storage class [enabled by default] drivers/usb/gadget/g_ffs.c:81:1: warning: type defaults to ‘int’ in declaration of ‘USB_ETHERNET_MODULE_PARAMETERS’ [-Wimplicit-int] drivers/usb/gadget/g_ffs.c:81:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes] This patch fixes the warning by making USB_ETHERNET_MODULE_PARAMETERS to be used iff u_ether.h is included, otherwise it is not needed. Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
Thomas Pugliese authored
This patch adds support for isochronous out transfers to the HWA. The primary changes are: 1. Add a isoc_pack_desc_urb field to struct wa_seg. This urb is used to send the isochronous packet info message to the HWA which describes the isoc data segment(s) that will be sent as the payload of the transfer request. 2. Use the URB iso_frame_desc field to populate the isochronous packet info message and data segments sent to the HWA. 3. After the data is sent and transfer result is returned from the HWA, read the isoc packet status message from the HWA. The contents of the isoc packet status message are used to set the iso_frame_desc status and actual_length fields in the original isoc URB. This feature required the addition of a some state tracking variables in struct wahc so the dti_urb knows what type of packet it expects to receive next. Signed-off-by:
-
Heikki Krogerus authored
It's not used anymore. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
- 05 Oct, 2013 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes, including a regression fix from Liu Bo that solves rare crashes with compression on. I've merged my for-linus up to 3.12-rc3 because the top commit is only meant for 3.12. The rest of the fixes are also available in my master branch on top of my last 3.11 based pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Fix crash due to not allocating integrity data for a bioset Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing Btrfs: eliminate races in worker stopping code Btrfs: fix crash of compressed writes Btrfs: fix transid verify errors when recovering log tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Two patches for the OMAP driver, dealing with setting up IRQs properly on the device tree boot path" * tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio/omap: auto-setup a GPIO when used as an IRQ gpio/omap: maintain GPIO and IRQ usage separately
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are none fixes for various USB driver problems. The majority are gadget/musb fixes, but there are some new device ids in here as well" * tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: add Intel Clovertrail pci id usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints usb: gadget: f_fs: fix error handling usb: musb: dsps: do not bind to "musb-hdrc" USB: serial: option: Ignore card reader interface on Huawei E1750 usb: musb: gadget: fix otg active status flag usb: phy: gpio-vbus: fix deferred probe from __init usb: gadget: pxa25x_udc: fix deferred probe from __init usb: musb: fix otg default state
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fixes from Greg KH: "Here are two tty driver fixes for 3.12-rc4. One fixes the reported regression in the n_tty code that a number of people found recently, and the other one fixes an issue with xen consoles that broke in 3.10" * tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: xen/hvc: allow xenboot console to be used again tty: Fix pty master read() after slave closes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are 4 tiny staging and iio driver fixes for 3.12-rc4. Nothing major, just some small fixes for reported issues" * tag 'staging-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice iio:magnetometer: Bugfix magnetometer default output registers iio: Remove debugfs entries in iio_device_unregister() iio: amplifiers: ad8366: Remove regulator_put
-
