- 28 Jan, 2021 2 commits
-
-
Damien Le Moal authored
Some block device drivers, e.g. the skd driver, call set_capacity() with IRQ disabled. This results in lockdep ito complain about inconsistent lock states ("inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage") because set_capacity takes a block device bd_size_lock using the functions spin_lock() and spin_unlock(). Ensure a consistent locking state by replacing these calls with spin_lock_irqsave() and spin_lock_irqrestore(). The same applies to bdev_set_nr_sectors(). With this fix, all lockdep complaints are resolved. Signed-off-by:Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Baolin Wang authored
On !PREEMPT kernel, we can get below softlockup when doing stress testing with creating and destroying block cgroup repeatly. The reason is it may take a long time to acquire the queue's lock in the loop of blkcg_destroy_blkgs(), or the system can accumulate a huge number of blkgs in pathological cases. We can add a need_resched() check on each loop and release locks and do cond_resched() if true to avoid this issue, since the blkcg_destroy_blkgs() is not called from atomic contexts. [ 4757.010308] watchdog: BUG: soft lockup - CPU#11 stuck for 94s! [ 4757.010698] Call trace: [ 4757.010700] blkcg_destroy_blkgs+0x68/0x150 [ 4757.010701] cgwb_release_workfn+0x104/0x158 [ 4757.010702] process_one_work+0x1bc/0x3f0 [ 4757.010704] worker_thread+0x164/0x468 [ 4757.010705] kthread+0x108/0x138 Suggested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
- 27 Jan, 2021 1 commit
-
-
Maxim Mikityanskiy authored
The cited commit introduced a serious regression with SATA write speed, as found by bisecting. This patch reverts this commit, which restores write speed back to the values observed before this commit. The performance tests were done on a Helios4 NAS (2nd batch) with 4 HDDs (WD8003FFBX) using dd (bs=1M count=2000). "Direct" is a test with a single HDD, the rest are different RAID levels built over the first partitions of 4 HDDs. Test results are in MB/s, R is read, W is write. | Direct | RAID0 | RAID10 f2 | RAID10 n2 | RAID6 ----------------+--------+-------+-----------+-----------+-------- 9011495c | R:256 | R:313 | R:276 | R:313 | R:323 (before faulty) | W:254 | W:253 | W:195 | W:204 | W:117 ----------------+--------+-------+-----------+-----------+-------- 5ff9f192 | R:257 | R:398 | R:312 | R:344 | R:391 (faulty commit) | W:154 | W:122 | W:67.7 | W:66.6 | W:67.2 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:256 | R:401 | R:312 | R:356 | R:375 unpatched | W:149 | W:123 | W:64 | W:64.1 | W:61.5 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:255 | R:396 | R:312 | R:340 | R:393 patched | W:247 | W:274 | W:220 | W:225 | W:121 Applying this patch doesn't hurt read performance, while improves the write speed by 1.5x - 3.5x (more impact on RAID tests). The write speed is restored back to the state before the faulty commit, and even a bit higher in RAID tests (which aren't HDD-bound on this device) - that is likely related to other optimizations done between the faulty commit and 5.10.10 which also improved the read speed. Signed-off-by:Maxim Mikityanskiy <maxtram95@gmail.com> Fixes: 5ff9f192 ("block: simplify set_init_blocksize") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 25 Jan, 2021 4 commits
-
-
Josef Bacik authored
When setting up a device, we can krealloc the config->socks array to add new sockets to the configuration. However if we happen to get a IO request in at this point even though we aren't setup we could hit a UAF, as we deref config->socks without any locking, assuming that the configuration was setup already and that ->socks is safe to access it as we have a reference on the configuration. But there's nothing really preventing IO from occurring at this point of the device setup, we don't want to incur the overhead of a lock to access ->socks when it will never change while the device is running. To fix this UAF scenario simply freeze the queue if we are adding sockets. This will protect us from this particular case without adding any additional overhead for the normal running case. Cc: stable@vger.kernel.org Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Jan Höppner authored
Our intention was to only remove path kobjects whenever a device is being set offline. However, one corner case was missing. If a device is disabled and enabled (using the IOCTLs BIODASDDISABLE and BIODASDENABLE respectively), the enabling process will call dasd_eckd_reload_device() which itself calls dasd_eckd_read_conf() in order to update path information. During that update, dasd_eckd_clear_conf_data() clears all old data and also removes all kobjects. This will leave us with an inconsistent state of path kobjects and a subsequent path verification leads to a failing kobject creation. Fix this by removing kobjects only in the context of offlining a device as initially intended. Fixes: 19508b20 ("s390/dasd: Display FC Endpoint Security information via sysfs") Reported-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Dinghao Liu authored
Once we have called device_initialize(), we should use put_device() to give up the reference on error, just like what we have done on failure of device_add(). Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
-
Ming Lei authored
In case of blk_mq_is_sbitmap_shared(), we should test QUEUE_FLAG_HCTX_ACTIVE against q->queue_flags instead of BLK_MQ_S_TAG_ACTIVE. So fix it. Cc: John Garry <john.garry@huawei.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Fixes: f1b49fdc ("blk-mq: Record active_queues_shared_sbitmap per tag_set for when using shared sbitmap") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
- 21 Jan, 2021 2 commits
-
-
Pan Bian authored
The allocated page is not released if error occurs in nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid possible memory leak issue. Fixes: aff3fb18 ("lightnvm: move bad block and chunk state logic to core") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci" * tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme: nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length
-
- 20 Jan, 2021 4 commits
-
-
Christoph Hellwig authored
Properly unwind step by step using refactored helpers from nvme_unmap_data to avoid a potential double dma_unmap on a mapping failure. Fixes: 7fe07d14 ("nvme-pci: merge nvme_free_iod into nvme_unmap_data") Reported-by:
Marc Orr <marcorr@google.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Christoph Hellwig authored
Split out three helpers from nvme_unmap_data that will allow finer grained unwinding from nvme_map_data. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Set prev_flush_start and flush_bio in an atomic way
-
Xiao Ni authored
One customer reports a crash problem which causes by flush request. It triggers a warning before crash. /* new request after previous flush is completed */ if (ktime_after(req_start, mddev->prev_flush_start)) { WARN_ON(mddev->flush_bio); mddev->flush_bio = bio; bio = NULL; } The WARN_ON is triggered. We use spin lock to protect prev_flush_start and flush_bio in md_flush_request. But there is no lock protection in md_submit_flush_data. It can set flush_bio to NULL first because of compiler reordering write instructions. For example, flush bio1 sets flush bio to NULL first in md_submit_flush_data. An interrupt or vmware causing an extended stall happen between updating flush_bio and prev_flush_start. Because flush_bio is NULL, flush bio2 can get the lock and submit to underlayer disks. Then flush bio1 updates prev_flush_start after the interrupt or extended stall. Then flush bio3 enters in md_flush_request. The start time req_start is behind prev_flush_start. The flush_bio is not NULL(flush bio2 hasn't finished). So it can trigger the WARN_ON now. Then it calls INIT_WORK again. INIT_WORK() will re-initialize the list pointers in the work_struct, which then can result in a corrupted work list and the work_struct queued a second time. With the work list corrupted, it can lead in invalid work items being used and cause a crash in process_one_work. We need to make sure only one flush bio can be handled at one same time. So add spin lock in md_submit_flush_data to protect prev_flush_start and flush_bio in an atomic way. Reviewed-by:David Jeffery <djeffery@redhat.com> Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
- 18 Jan, 2021 5 commits
-
-
Chaitanya Kulkarni authored
The function nvmet_execute_identify_ns() doesn't set the status if call to nvmet_find_namespace() fails. In that case we set the status of the request to the value return by the nvmet_copy_sgl(). Set the status to NVME_SC_INVALID_NS and adjust the code such that request will have the right status on nvmet_find_namespace() failure. Without this patch :- NVME Identify Namespace 3: nsze : 0 ncap : 0 nuse : 0 nsfeat : 0 nlbaf : 0 flbas : 0 mc : 0 dpc : 0 dps : 0 nmic : 0 rescap : 0 fpi : 0 dlfeat : 0 nawun : 0 nawupf : 0 nacwu : 0 nabsn : 0 nabo : 0 nabspf : 0 noiob : 0 nvmcap : 0 mssrl : 0 mcl : 0 msrc : 0 nsattr : 0 nvmsetid: 0 anagrpid: 0 endgid : 0 nguid : 00000000000000000000000000000000 eui64 : 0000000000000000 lbaf 0 : ms:0 lbads:0 rp:0 (in use) With this patch-series :- feb3b88b501e (HEAD -> nvme-5.11) nvmet: remove extra variable in identify ns 6302aa67210a nvmet: remove extra variable in id-desclist ed57951da453 nvmet: remove extra variable in smart log nsid be384b8c24dc nvmet: set right status on error in id-ns handler NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0xb) Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Klaus Jensen authored
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled by the host. Signed-off-by:
Klaus Jensen <k.jensen@samsung.com> [hch: avoid a local variable and add a comment] Signed-off-by:
-
Chao Leng authored
Each name space has a request queue, if complete request long time, multi request queues may have time out requests at the same time, nvme_tcp_timeout will execute concurrently. Multi requests in different request queues may be queued in the same tcp queue, multi nvme_tcp_timeout may call nvme_tcp_stop_queue at the same time. The first nvme_tcp_stop_queue will clear NVME_TCP_Q_LIVE and continue stopping the tcp queue(cancel io_work), but the others check NVME_TCP_Q_LIVE is already cleared, and then directly complete the requests, complete request before the io work is completely canceled may lead to a use-after-free condition. Add a multex lock to serialize nvme_tcp_stop_queue. Signed-off-by:
Chao Leng <lengchao@huawei.com> Signed-off-by:
-
Chao Leng authored
A crash happens when inject completing request long time(nearly 30s). Each name space has a request queue, when inject completing request long time, multi request queues may have time out requests at the same time, nvme_rdma_timeout will execute concurrently. Multi requests in different request queues may be queued in the same rdma queue, multi nvme_rdma_timeout may call nvme_rdma_stop_queue at the same time. The first nvme_rdma_timeout will clear NVME_RDMA_Q_LIVE and continue stopping the rdma queue(drain qp), but the others check NVME_RDMA_Q_LIVE is already cleared, and then directly complete the requests, complete request before the qp is fully drained may lead to a use-after-free condition. Add a multex lock to serialize nvme_rdma_stop_queue. Signed-off-by:
Israel Rukshin <israelr@nvidia.com> Reviewed-by:
-
Revanth Rajashekar authored
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and the metadata size play a vital role in deteriming the host buffer size. If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer, instead the controller adds it. Signed-off-by:
Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by:
-
- 14 Jan, 2021 5 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - don't initialize hwmon for discover controllers (Sagi Grimberg) - fix iov_iter handling in nvme-tcp (Sagi Grimberg) - fix a preempt warning in nvme-tcp (Sagi Grimberg) - fix a possible NULL pointer dereference in nvme (Israel Rukshin)" * tag 'nvme-5.11-2021-01-14' of git://git.infradead.org/nvme: nvme: don't intialize hwmon for discovery controllers nvme-tcp: fix possible data corruption with bio merges nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
-
Sagi Grimberg authored
Discovery controllers usually don't support smart log page command. So when we connect to the discovery controller we see this warning: nvme nvme0: Failed to read smart log (error 24577) nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009 nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" Introduce a new helper to understand if the controller is a discovery controller and use this helper to skip nvme_init_hwmon (also use it in other places that we check if the controller is a discovery controller). Fixes: 400b6a7b ("nvme: Add hardware monitoring support") Signed-off-by:
-
Sagi Grimberg authored
When a bio merges, we can get a request that spans multiple bios, and the overall request payload size is the sum of all bios. When we calculate how much we need to send from the existing bio (and bvec), we did not take into account the iov_iter byte count cap. Since multipage bvecs support, bvecs can split in the middle which means that when we account for the last bvec send we should also take the iov_iter byte count cap as it might be lower than the last bvec size. Reported-by:
Hao Wang <pkuwangh@gmail.com> Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver") Tested-by:
-
Sagi Grimberg authored
We shouldn't call smp_processor_id() in a preemptible context, but this is advisory at best, so instead call __smp_processor_id(). Fixes: db5ad6b7 ("nvme-tcp: try to send request in queue_rq context") Reported-by:
Or Gerlitz <gerlitz.or@gmail.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
-
Israel Rukshin authored
When setting port traddr to INADDR_ANY, the listening cm_id->device is NULL. The associate IB device is known only when a connect request event arrives, so checking T10-PI device capability should be done at this stage. Fixes: b09160c3 ("nvmet-rdma: add metadata/T10-PI support") Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by:
-
- 09 Jan, 2021 5 commits
-
-
Coly Li authored
If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature set, it means the cache device is created with obsoleted layout with obso_bucket_site_hi. Now bcache does not support this feature bit, a new BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added for a better layout to support large bucket size. For the legacy compatibility purpose, if a cache device created with obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache devices attached to this cache set should be set to read-only. Then the dirty data can be written back to backing device before re-create the cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit by the latest bcache-tools. This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit when running a cache set and attach a bcache device to the cache set. If this bit is set, - When run a cache set, print an error kernel message to indicate all following attached bcache device will be read-only. - When attach a bcache device, print an error kernel message to indicate the attached bcache device will be read-only, and ask users to update to latest bcache-tools. Such change is only for cache device whose bucket size >= 32MB, this is for the zoned SSD and almost nobody uses such large bucket size at this moment. If you don't explicit set a large bucket size for a zoned SSD, such change is totally transparent to your bcache device. Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Coly Li authored
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET was introduced into the incompat feature set. It used bucket_size_hi (which was added at the tail of struct cache_sb_disk) to extend current 16bit bucket size to 32bit with existing bucket_size in struct cache_sb_disk. This is not a good idea, there are two obvious problems, - Bucket size is always value power of 2, if store log2(bucket size) in existing bucket_size of struct cache_sb_disk, it is unnecessary to add bucket_size_hi. - Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in struct cache_sb_disk, bucket_size_hi was added after d[] which makes csum_set calculate an unexpected super block checksum. To fix the above problems, this patch introduces a new incompat feature bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it means bucket_size in struct cache_sb_disk stores the order of power-of-2 bucket size value. When user specifies a bucket size larger than 32768 sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to incompat feature set, and bucket_size stores log2(bucket size) more than store the real bucket size value. The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore, it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only recognized by kernel driver for legacy compatible purpose. The previous bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk and not used in bcache-tools anymore. For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature, bcache-tools and kernel driver still recognize the feature string and display it as "obso_large_bucket". With this change, the unnecessary extra space extend of bcache on-disk super block can be avoided, and csum_set() may generate expected check sum as well. Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by:
-
Coly Li authored
This patch adds the check for features which is incompatible for current supported feature sets. Now if the bcache device created by bcache-tools has features that current kernel doesn't support, read_super() will fail with error messoage. E.g. if an unsupported incompatible feature detected, bcache register will fail with dmesg "bcache: register_bcache() error : Unsupported incompatible feature found". Fixes: d721a43f ("bcache: increase super block version for cache device and backing device") Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by:
-
Coly Li authored
This patch fixes the following typos, from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP Fixes: d721a43f ("bcache: increase super block version for cache device and backing device") Fixes: ffa47032 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by:
-
Yi Li authored
There is no need to reassign pdev_set_uuid in the second loop iteration, so move it to the place before second loop. Signed-off-by:
Yi Li <yili@winhong.com> Signed-off-by:
-
- 08 Jan, 2021 7 commits
-
-
John Garry authored
Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives something like: root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3 Add the decoding for that flag. Fixes: 32bc15af ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by:
-
Jack Wang authored
We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c2 ("block/rnbd: client: main functionality") Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by:
Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by:
-
Swapnil Ingle authored
Adding name to the Contributors List Signed-off-by:
Swapnil Ingle <ingleswapnil@gmail.com> Acked-by:
Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by:
-
Guoqing Jiang authored
Since dynamically allocate sglist is used for rnbd_iu, we can't free sg table after send_usr_msg since the callback function (cqe.done) could still access the sglist. Otherwise KASAN reports UAF issue: [ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290 [ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0 [ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 4856.601766] Call Trace: [ 4856.601785] <IRQ> [ 4856.601822] dump_stack+0x99/0xcb [ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.601888] print_address_description.constprop.7+0x1e/0x230 [ 4856.601913] ? freeze_kernel_threads+0x73/0x73 [ 4856.601965] ? mark_held_locks+0x29/0xa0 [ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602079] kasan_report.cold.9+0x37/0x7c [ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib] [ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602256] dma_direct_unmap_sg+0x53/0x290 [ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client] [ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client] [ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib] [ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0 [ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0 [ 4856.602647] ? rwlock_bug.part.1+0x60/0x60 [ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client] [ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client] [ 4856.602857] ? check_flags.part.31+0x6c/0x1f0 [ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core] [ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core] [ 4856.603358] irq_poll_softirq+0xe6/0x280 [ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210 [ 4856.603446] __do_softirq+0x10d/0x646 [ 4856.603540] asm_call_irq_on_stack+0x12/0x20 [ 4856.603563] </IRQ> [ 4856.605096] Allocated by task 8914: [ 4856.605510] kasan_save_stack+0x19/0x40 [ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 4856.605552] __kmalloc+0x155/0x320 [ 4856.605574] __sg_alloc_table+0x155/0x1c0 [ 4856.605594] sg_alloc_table+0x1f/0x50 [ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client] [ 4856.605646] remap_devs+0x71/0x210 [rnbd_client] [ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.605728] process_one_work+0x521/0xa90 [ 4856.605748] worker_thread+0x65/0x5b0 [ 4856.605769] kthread+0x1f2/0x210 [ 4856.605789] ret_from_fork+0x22/0x30 [ 4856.606159] Freed by task 8914: [ 4856.606559] kasan_save_stack+0x19/0x40 [ 4856.606580] kasan_set_track+0x1c/0x30 [ 4856.606601] kasan_set_free_info+0x1b/0x30 [ 4856.606622] __kasan_slab_free+0x108/0x150 [ 4856.606642] slab_free_freelist_hook+0x64/0x190 [ 4856.606661] kfree+0xe2/0x650 [ 4856.606681] __sg_free_table+0xa4/0x100 [ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client] [ 4856.606733] remap_devs+0x71/0x210 [rnbd_client] [ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.606813] process_one_work+0x521/0xa90 [ 4856.606833] worker_thread+0x65/0x5b0 [ 4856.606853] kthread+0x1f2/0x210 [ 4856.606872] ret_from_fork+0x22/0x30 The solution is to free iu's sgtable after the iu is not used anymore. And also move sg_alloc_table into rnbd_get_iu accordingly. Fixes: 5a1328d0 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Signed-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
-
Jack Wang authored
KASAN detect following BUG: [ 778.215311] ================================================================== [ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842 [ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 778.220555] Call Trace: [ 778.220609] dump_stack+0x99/0xcb [ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220715] print_address_description.constprop.7+0x1e/0x230 [ 778.220750] ? freeze_kernel_threads+0x73/0x73 [ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220994] kasan_report.cold.9+0x37/0x7c [ 778.221066] ? kobject_put+0x80/0x270 [ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.221304] ? sysfs_file_ops+0x90/0x90 [ 778.221353] kernfs_fop_write+0x141/0x240 [ 778.221451] vfs_write+0x142/0x4d0 [ 778.221553] ksys_write+0xc0/0x160 [ 778.221602] ? __ia32_sys_read+0x50/0x50 [ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210 [ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50 [ 778.221821] do_syscall_64+0x33/0x40 [ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.221896] RIP: 0033:0x7f4affdd9504 [ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504 [ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003 [ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540 [ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520 [ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002 [ 778.222764] Allocated by task 3212: [ 778.223285] kasan_save_stack+0x19/0x40 [ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 778.223347] kmem_cache_alloc_trace+0x186/0x350 [ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server] [ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server] [ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core] [ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 778.223743] process_one_work+0x521/0xa90 [ 778.223773] worker_thread+0x65/0x5b0 [ 778.223802] kthread+0x1f2/0x210 [ 778.223833] ret_from_fork+0x22/0x30 [ 778.224296] Freed by task 8842: [ 778.224800] kasan_save_stack+0x19/0x40 [ 778.224829] kasan_set_track+0x1c/0x30 [ 778.224860] kasan_set_free_info+0x1b/0x30 [ 778.224889] __kasan_slab_free+0x108/0x150 [ 778.224919] slab_free_freelist_hook+0x64/0x190 [ 778.224947] kfree+0xe2/0x650 [ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server] [ 778.225011] kobject_put+0xda/0x270 [ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server] [ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.225111] kernfs_fop_write+0x141/0x240 [ 778.225140] vfs_write+0x142/0x4d0 [ 778.225169] ksys_write+0xc0/0x160 [ 778.225198] do_syscall_64+0x33/0x40 [ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00 which belongs to the cache kmalloc-512 of size 512 [ 778.227464] The buggy address is located 40 bytes inside of 512-byte region [ffff88b1d6516c00, ffff88b1d6516e00) The problem is in the sess_dev release function we call rnbd_destroy_sess_dev, and could free the sess_dev already, but we still set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use after free. To fix it, move the keep_id before the sysfs removal, and cache the rnbd_srv_session for lock accessing, Fixes: 78699805 ("block/rnbd-srv: close a mapped device from server side.") Signed-off-by: -
Jack Wang authored
lkp reboot following build error: drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn': >> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration] 387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT); | ^~~~~~~~~~~~~~~~~~~~~ The reason is CONFIG_SG_POOL is not enabled in the config, to avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT. Fixes: 5a1328d0 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Christoph Hellwig authored
bdev_evict_inode and bdev_free_inode are also called for the root inode of bdevfs, for which bdev_alloc is never called. Move the zeroing o f struct block_device and the initialization of the bd_bdi field into bdev_alloc_inode to make sure they are initialized for the root inode as well. Fixes: e6cb5382 ("block: initialize struct block_device in bdev_alloc") Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by:
-
- 07 Jan, 2021 2 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for 5.11: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im)" * tag 'nvme-5.11-2021-01-07' of git://git.infradead.org/nvme: nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context
-
Satya Tangirala authored
freeze/thaw_bdev() currently use bdev->bd_fsfreeze_count to infer whether or not bdev->bd_fsfreeze_sb is valid (it's valid iff bd_fsfreeze_count is non-zero). thaw_bdev() doesn't nullify bd_fsfreeze_sb. But this means a freeze_bdev() call followed by a thaw_bdev() call can leave bd_fsfreeze_sb with a non-null value, while bd_fsfreeze_count is zero. If freeze_bdev() is called again, and this time get_active_super() returns NULL (e.g. because the FS is unmounted), we'll end up with bd_fsfreeze_count > 0, but bd_fsfreeze_sb is *untouched* - it stays the same (now garbage) value. A subsequent thaw_bdev() will decide that the bd_fsfreeze_sb value is legitimate (since bd_fsfreeze_count > 0), and attempt to use it. Fix this by always setting bd_fsfreeze_sb to NULL when bd_fsfreeze_count is successfully decremented to 0 in thaw_sb(). Alternatively, we could set bd_fsfreeze_sb to whatever get_active_super() returns in freeze_bdev() whenever bd_fsfreeze_count is successfully incremented to 1 from 0 (which can be achieved cleanly by moving the line currently setting bd_fsfreeze_sb to immediately after the "sync:" label, but it might be a little too subtle/easily overlooked in future). This fixes the currently panicking xfstests generic/085. Fixes: 040f04bd ("fs: simplify freeze_bdev/thaw_bdev") Signed-off-by:
Satya Tangirala <satyat@google.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
- 06 Jan, 2021 3 commits
-
-
Max Gurtovoy authored
The only used argument in this function is the "req". Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by:
-
Israel Rukshin authored
When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some requests at rsp_wait_list. In case a disconnect occurs at this state, no one will empty this list and will return the requests to free_rsps list. Normally nvmet_rdma_queue_established() free those requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in this case __nvmet_rdma_queue_disconnect() is called before. The crash happens at nvmet_rdma_free_rsps() when calling list_del(&rsp->free_list), because the request exists only at the wait list. To fix the issue, simply clear rsp_wait_list when destroying the queue. Signed-off-by:
-
Minwoo Im authored
There are no callers for nvme_reset_ctrl_sync() and nvme_alloc_request_qid() so that we keep the symbols exported. Unexport those functions, mark them static and update the header file respectively. Signed-off-by:
-
