- 08 Jan, 2009 40 commits
-
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Alan Cox authored
This matters for some controllers and in one or two cases almost doubles PIO performance. Add a bmdma32 operations set we can inherit and activate it for some controllers Signed-off-by:
-
Shane Huang authored
There is an issue in ATI SB600/SB700 SATA that PxSERR.E should not be set on some conditions, which will lead to many SATA ODD error messages. commit 55a61604 is the workaround. Since SB800 fixed this HW issue, IGN_SERR_INTERNAL should be withdrawn for SB800. Signed-off-by:
Shane Huang <shane.huang@amd.com> Signed-off-by:
-
Tejun Heo authored
Reimplement mode programming logic of pata_hpt366 such that it's identical to that of IDE hpt366 driver. The differences were... * pata_hpt366 used 0xCFFF8FFFF to mask pio modes and 0x3FFFFFFF dma modes. IDE hpt366 uses 0xC1F8FFFF for PIO, 0x303800FF for MWDMA and 0x30070000 for UDMA. * pata_hpt366 doesn't set 0x08000000 for PIO unless it's already set and always turns it on for MWDMA/UDMA. IDE hpt366 doesn't bother with the bit. It always uses what was there. * IDE hpt366 always clears 0xC0000000. pata_hpt366 doesn't. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by: -
David Daney authored
According to the Compact Flash specification r4.1, PIO modes 5 and 6 do not use iordy. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
-
Sonic Zhang authored
-- UPD include/linux/compile.h `___pata_platform_remove' referenced in section `__ksymtab_gpl' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o make: *** [.tmp_vmlinux1] Error 1 -- __pata_platform_remove() should not be in discarded section __pata_platform_remove(struct device *dev) is invoked in both pata_platform.c and pata_of_platform.c by reomve function defined in discarded section ".devexit.text". An exported function should not be put into discarded section. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Grant Grundler authored
AFAICT, struct sil24_port_multiplier isn't used anywhere. Remove it. Signed-off-by:
Grant Grundler <grundler@google.com> Signed-off-by:
-
Shane Huang authored
The present AHCI driver seems to support SATA GEN 3 speed, but the related messages should be modified. Signed-off-by:
-
Tejun Heo authored
Certain ACPI implementations mess up IOCFG on _STM making libata detect cable type incorrectly after a suspend/resume cycle. This patch makes ata_piix save IOCFG on attach, use the saved value for things which aren't dynamic and restore it on detach so that the next driver also gets the BIOS initialized value. This patch contains the following changes. * makes ich_pata_cable_detect() use saved_iocfg. * make piix_iocfg_bit18_quirk() take @host and use saved_iocfg. * hpriv allocation moved upwards to save iocfg before doing anything else. This fixes bz#11879. Andreas Mohr reported and diagnosed the problem. Signed-off-by:
-
Alan Cox authored
In very obscure cases this can cause problems. We need to help the hardware out a bit to avoid DMA problems on a reset. Signed-off-by:
-
Alan Cox authored
We can't assume some of the setup here on non x86 boxes. Signed-off-by:
-
Alan Cox authored
Correct the DMA bit flags (UDMA and MWDMA were swapped) Add workarounds so that we clear ERR and INTR bits before issuing a DMA Add workarounds so that we stop a live DMA before touching the CTL register Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits) serial: Add driver for the Cell Network Processor serial port NWP device powerpc: enable dynamic ftrace powerpc/cell: Fix the prototype of create_vma_map() powerpc/mm: Make clear_fixmap() actually work powerpc/kdump: Use ppc_save_regs() in crash_setup_regs() powerpc: Export cacheable_memzero as its now used in a driver powerpc: Fix missing semicolons in mmu_decl.h powerpc/pasemi: local_irq_save uses an unsigned long powerpc/cell: Fix some u64 vs. long types powerpc/cell: Use correct types in beat files powerpc: Use correct type in prom_init.c powerpc: Remove unnecessary casts mtd/ps3vram: Use _PAGE_NO_CACHE in memory ioremap mtd/ps3vram: Use msleep in waits mtd/ps3vram: Use proper kernel types mtd/ps3vram: Cleanup ps3vram driver messages mtd/ps3vram: Remove ps3vram debug routines mtd/ps3vram: Add modalias support to the ps3vram driver mtd/ps3vram: Add ps3vram driver for accessing video RAM as MTD powerpc: Fix iseries drivers build failure without CONFIG_VIOPATH ...
-
Coly Li authored
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by:
Coly Li <coyli@suse.de> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
Building an allnoconfig kernel, sparse asked whether these could be static, so I checked, and they are only used in the file where they are declared. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
Wu Fengguang <wfg@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
-
Wu Fengguang authored
There have been some local definitions of swap(), it's time to replace them all with a uniform one. Signed-off-by:
-
Wu Fengguang authored
This is to avoid name clashes for the introduction of a global swap() macro. Signed-off-by:
-
Wu Fengguang authored
In preparation for the introduction of a generic swap() macro. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wu Fengguang authored
In preparation for the introduction of a generic swap() macro. Signed-off-by:
-
Fernando Carrijo authored
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
Theodore Ts'o <tytso@mit.edu> Acked-by:
Mark Fasheh <mfasheh@suse.com> Acked-by:
Casey Schaufler <casey@schaufler-ca.com> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
roel kluin authored
romfs_strnlen() returns int unsigned X >= 0 is always true [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Magnus Damm authored
Remove the saved_max_pfn check from the /proc/vmcore function read_from_oldmem(). No need to verify, we should be able to just trust that "elfcorehdr=" is correctly passed to the crash kernel on the kernel command line like we do with other parameters. The read_from_oldmem() function in fs/proc/vmcore.c is quite similar to read_from_oldmem() in drivers/char/mem.c, but only in the latter it makes sense to use saved_max_pfn. For oldmem it is used to determine when to stop reading. For vmcore we already have the elf header info pointing out the physical memory regions, no need to pass the end-of- old-memory twice. Removing the saved_max_pfn check from vmcore makes it possible for architectures to skip oldmem but still support crash dump through vmcore - without the need for the old saved_max_pfn cruft. Architectures that want to play safe can do the saved_max_pfn check in copy_oldmem_page(). Not sure why anyone would want to do that, but that's even safer than today - the saved_max_pfn check in vmcore removed by this patch only checks the first page. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Acked-by:
Simon Horman <horms@verge.net.au> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Evgeniy Polyakov authored
Send completion status of the commands to the userspace. Message and protocol are described in the documentation. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: Paul Alfille <paul.alfille@gmail.com> Signed-off-by:
-
Evgeniy Polyakov authored
Command which allows to reset the bus. Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Evgeniy Polyakov authored
This small patchset extendes existing commands with reset, master IO and status messages. Reset is used to reset the bus for given master device, master IO command allows to initiate IO against bus itself not selecting slave device first, which can be used to probe the device for example. And status messages carry command completion status back to the userspace (namely very useful to get -ENODEV from when requested device was not found). Great thanks to Paul Alfille of OWFS for testing and commands suggestions. This patch: Allow starting of IO not against already found slave devices, but against the bus itself, which can be used for example to probe devices. [akpm@linux-foundation.org: reindent switch statements] Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Evgeniy Polyakov authored
Initiates search (or alarm search) and returns all found devices to userspace. Found devices are not added into the system (i.e. they are not attached to family devices or bus masters), it will be done via (if was not done yet) usual timed searching. Signed-off-by:
-
Evgeniy Polyakov authored
Writes and returns sampled data back to userspace. Signed-off-by:
-
Evgeniy Polyakov authored
This patch series introduces and extends several userspace commands used with netlink protocol. Touch block command allows to write data and return sampled data to the userspace. Extended search and alarm seach commands to return list of slave devices found during given search. List masters command allows to send all registered master IDs to the userspace. Great thanks to Paul Alfille (owfs) who tested this implementation and wrote w1-to-network daemon http://sourceforge.net/projects/w1repeater/ and Frederik Deweerdt and Randy Dunlap for review. This patch: Returns list of registered bus master devices. Signed-off-by:
-
Sascha Hauer authored
This patch adds support for the 1-wire master interface for i.MX27 and i.MX31. Signed-off-by:
Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
David Smith authored
Signed-off-by:
Marcel Selhorst <tpm@selhorst.net> Signed-off-by:
-
Matthew Garrett authored
Add a driver for controlling Dell-specific backlight and rfkill interfaces. This driver makes use of the dcdbas interface to the Dell firmware to allow the backlight and rfkill interfaces on Dell systems to be driven through the standardised sysfs interfaces. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Ivo van Doorn <ivdoorn@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Matthew Garrett authored
The dcdbas code allows calls to be made into the firmware on Dell systems. Exporting this to other drivers allows them to implement Dell-specific functionality in a safe way. Signed-off-by:
-
Kees Cook authored
While discussing[1] the need for glibc to have access to random bytes during program load, it seems that an earlier attempt to implement AT_RANDOM got stalled. This implements a random 16 byte string, available to every ELF program via a new auxv AT_RANDOM vector. [1] http://sourceware.org/ml/libc-alpha/2008-10/msg00006.html Ulrich said: glibc needs right after startup a bit of random data for internal protections (stack canary etc). What is now in upstream glibc is that we always unconditionally open /dev/urandom, read some data, and use it. For every process startup. That's slow. ... The solution is to provide a limited amount of random data to the starting process in the aux vector. I suggested 16 bytes and this is what the patch implements. If we need only 16 bytes or less we use the data directly. If we need more we'll use the 16 bytes to see a PRNG. This avoids the costly /dev/urandom use and it allows the kernel to use the most adequate source of random data for this purpose. It might not be the same pool as that for /dev/urandom. Concerns were expressed about the depletion of the randomness pool. But this patch doesn't make the situation worse, it doesn't deplete entropy more than happens now. Signed-off-by:
Kees Cook <kees.cook@canonical.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by:
-
