- 10 Sep, 2017 40 commits
-
-
Ioan-Adrian Ratiu authored
[ Upstream commit 13a6c832 ] Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion logic allows us to save a few cpu cycles by returning early, skipping the pending urb in case the stream was stopped; the stop logic handles the urb and sets the completion callbacks to NULL. Signed-off-by:
Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Sergei Shtylyov authored
[ Upstream commit 71eae1ca ] The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25 (bits 0-15 usually used for that are occupied by the packet checksum). Thus we need to set the 'shift_rd0' field in the SH7734 SoC data... Fixes: f0e81fec ("net: sh_eth: Add support SH7734") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 6ef4fb38 ] Recent changes made KERN_CONT mandatory for continued lines. In the absence of KERN_CONT, a newline may be implicit inserted by the core printk code. In show_pte, we (erroneously) use printk without KERN_CONT for continued prints, resulting in output being split across a number of lines, and not matching the intended output, e.g. [ff000000000000] *pgd=00000009f511b003 , *pud=00000009f4a80003 , *pmd=0000000000000000 Fix this by using pr_cont() for all the continuations. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit e19f32da ] Here, pci_iomap can fail, handle this case release selected pci regions and return -ENOMEM. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit 4dcd19bf ] Here, If devm_ioremap will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 7934c98a ] Markus reported that perf segfaults when reading /sys/kernel/notes from a kernel linked with GNU gold, due to what looks like a gold bug, so do some bounds checking to avoid crashing in that case. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Daniel Bristot de Oliveira authored
[ Upstream commit 07485918 ] Currently, the sched:sched_switch tracepoint reports deadline tasks with priority -1. But when reading the trace via perf script I've got the following output: # ./d & # (d is a deadline task, see [1]) # perf record -e sched:sched_switch -a sleep 1 # perf script ... swapper 0 [000] 2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295] d 2593 [000] 2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295] The task d reports the wrong priority [4294967295]. This happens because the "int prio" is stored in an unsigned long long val. Although it is set as a %lld, as int is shorter than unsigned long long, trace_seq_printf prints it as a positive number. The fix is just to cast the val as an int, and print it as a %d, as in the sched:sched_switch tracepoint's "format". The output with the fix is: # ./d & # perf record -e sched:sched_switch -a sleep 1 # perf script ... swapper 0 [000] 4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1] d 10941 [000] 4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120] [1] d.c --- #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #include <linux/types.h> #include <linux/sched.h> struct sched_attr { __u32 size, sched_policy; __u64 sched_flags; __s32 sched_nice; __u32 sched_priority; __u64 sched_runtime, sched_deadline, sched_period; }; int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags) { return syscall(__NR_sched_setattr, pid, attr, flags); } int main(void) { struct sched_attr attr = { .size = sizeof(attr), .sched_policy = SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */ .sched_runtime = 10 * 1000 * 1000, .sched_period = attr.sched_deadline = 30 * 1000 * 1000, }; if (sched_setattr(0, &attr, 0) < 0) { perror("sched_setattr"); return -1; } for(;;); } --- Committer notes: Got the program from the provided URL, http://bristot.me/lkml/d.c, trimmed it and included in the cset log above, so that we have everything needed to test it in one place. Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Tested-by:
-
David Lechner authored
[ Upstream commit 43aef5c2 ] This fixes an error message that was probably copied and pasted. The same message is used for both the in and out endpoints, so it makes it impossible to know which one actually failed because both cases say "IN". Make the out endpoint error message say "OUT". Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit c2a6bbaf ] The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 3ef01c96 ] NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so defconfig needs to be adjusted to silence warnings: warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Moritz Fischer authored
[ Upstream commit c415f9e8 ] The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core which fixes some silicon bugs that needed software workarounds in Version 1.0 that was used on Zynq systems. Signed-off-by:
Moritz Fischer <mdf@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Rob Herring <robh+dt@kernel.org> Acked-by:
Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Michal Simek authored
[ Upstream commit 4ea2a6be ] The patch removes these warnings reported by dtc 1.4: Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by:
-
Stafford Horne authored
[ Upstream commit 086cc1c3 ] The build robot reports: .tmp_kallsyms1.o: In function `kallsyms_relative_base': >> (.rodata+0x8a18): undefined reference to `_text' This is when using 'make alldefconfig'. Adding this _text symbol to mark the start of the kernel as in other architecture fixes this. Signed-off-by:
Stafford Horne <shorne@gmail.com> Acked-by:
Jonas Bonn <jonas@southpole.se> Signed-off-by:
-
Phil Reid authored
[ Upstream commit 13288bdf ] Some system have multiple dw devices. Currently the driver uses a fixed name for the debugfs dir. Append dev name to the debugfs dir name to make it unique. Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 63c3194b ] The RESET register only have one self clearing bit and it should not be cached. If it is cached, when we sync the registers back to the chip we will initiate a software reset as well, which is not desirable. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 45e86971 ] Using ancient compilers (gcc-4.5 or older) on ARM, we get a link failure with the vfio-pci driver: ERROR: "__aeabi_lcmp" [drivers/vfio/pci/vfio-pci.ko] undefined! The reason is that the compiler tries to do a comparison of a 64-bit range. This changes it to convert to a 32-bit number explicitly first, as newer compilers do for themselves. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit a6cb3b86 ] For every submission buffer object one of MSM_SUBMIT_BO_WRITE and MSM_SUBMIT_BO_READ must be set (and nothing else). If we allowed zero then the buffer object would never get queued to be unreferenced. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Jordan Crouse authored
[ Upstream commit 88b333b0 ] Currently the value written to CP_RB_WPTR is calculated on the fly as (rb->next - rb->start). But as the code is designed rb->next is wrapped before writing the commands so if a series of commands happened to fit perfectly in the ringbuffer, rb->next would end up being equal to rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR. The easiest way to fix this is to mask WPTR when writing it to the hardware; it makes the hardware happy and the rest of the ringbuffer math appears to work and there isn't any point in upsetting anything. Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit c1d5f8ff ] This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e2 ("mlx4_core: Support ICM tables in coherent memory") Reported-by:
Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Zheng Li authored
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output [ Upstream commit e4c5e13a ] There is an inconsistent conditional judgement between __ip6_append_data and ip6_finish_output functions, the variable length in __ip6_append_data just include the length of application's payload and udp6 header, don't include the length of ipv6 header, but in ip6_finish_output use (skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ipv6 header. That causes some particular application's udp6 payloads whose length are between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even though the rst->dev support UFO feature. Add the length of ipv6 header to length in __ip6_append_data to keep consistent conditional judgement as ip6_finish_output for ip6 fragment. Signed-off-by:
Zheng Li <james.z.li@ericsson.com> Signed-off-by:
-
Pali Rohár authored
[ Upstream commit 4cf48f1d ] Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of qemu. eMMC itself is not detected and is not working. Real Nokia N900 harware does not have this problem. As eMMC is really not SDIO or SD based such change is harmless and will fix support for qemu. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Chun-Hao Lin authored
[ Upstream commit 610c9087 ] This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by:
Chun-Hao Lin <hau@realtek.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 0dad3a30 ] If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jarkko Sakkinen authored
[ Upstream commit 13b47cfc ] While cleaning up sysfs callback that prints EK we discovered a kernel memory leak. This commit fixes the issue by zeroing the buffer used for TPM command/response. The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or xen-tpmfront. Cc: stable@vger.kernel.org Fixes: 08837438 ("TPM: sysfs functions consolidation") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by:
Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit a24fa22c ] There is no need to use xen_blkif_get()/xen_blkif_put() in the kthread of xen-blkback. Thread stopping is synchronous and using the blkif reference counting in the kthread will avoid to ever let the reference count drop to zero at the end of an I/O running concurrent to disconnecting and multiple rings. Setting ring->xenblkd to NULL after stopping the kthread isn't needed as the kthread does this already. Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Steven Haigh <netwiz@crc.id.au> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6e7bc478 ] My recent change missed fact that UFO would perform a complete UDP checksum before segmenting in frags. In this case skb->ip_summed is set to CHECKSUM_NONE. We need to add this valid case to skb_needs_check() Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Mike Manning authored
[ Upstream commit 308453aa ] The MAC address of the physical interface is only copied to the VLAN when it is first created, resulting in an inconsistency after MAC address changes of only newly created VLANs having an up-to-date MAC. The VLANs should continue inheriting the MAC address of the physical interface until the VLAN MAC address is explicitly set to any value. This allows IPv6 EUI64 addresses for the VLAN to reflect any changes to the MAC of the physical interface and thus for DAD to behave as expected. Signed-off-by:
Mike Manning <mmanning@brocade.com> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit 51d7b120 ] In commit c4004b02 ("x86: remove the kernel code/data/bss resources from /proc/iomem") I was hoping to remove the phyiscal kernel address data from /proc/iomem entirely, but that had to be reverted because some system programs actually use it. This limits all the detailed resource information to properly credentialed users instead. Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit 34dbbcdb ] A lot of seqfile users seem to be using things like %pK that uses the credentials of the current process, but that is actually completely wrong for filesystem interfaces. The unix semantics for permission checking files is to check permissions at _open_ time, not at read or write time, and that is not just a small detail: passing off stdin/stdout/stderr to a suid application and making the actual IO happen in privileged context is a classic exploit technique. So if we want to be able to look at permissions at read time, we need to use the file open credentials, not the current ones. Normal file accesses can just use "f_cred" (or any of the helper functions that do that, like file_ns_capable()), but the seqfile interfaces do not have any such options. It turns out that seq_file _does_ save away the user_ns information of the file, though. Since user_ns is just part of the full credential information, replace that special case with saving off the cred pointer instead, and suddenly seq_file has all the permission information it needs. Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit a2370ba2 ] Bool values should be negated using logical operators. Using bitwise operators results in unexpected and possibly incorrect results. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Valentin Vidic authored
[ Upstream commit 860f01e9 ] systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 975e83cf ] If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5 (PM / Domains: Re-order initialization of generic_pm_domain_data) Cc: 4.4+ <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 575ced7f ] Just return an error upon failure. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 60bcabd0 ] This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by:
-
Calvin Owens authored
[ Upstream commit 5ec8a175 ] In _base_make_ioc_operational(), we walk ioc->reply_queue_list and pull a pointer out of successive elements of ioc->reply_post[] for each entry in that list if RDPQ is enabled. Since the code pulls the pointer for the next iteration at the bottom of the loop, it triggers the a KASAN dump on the final iteration: BUG: KASAN: slab-out-of-bounds in _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] at addr ffff880754816ab0 Read of size 8 by task modprobe/305 <snip> Call Trace: [<ffffffff81dfc591>] dump_stack+0x4d/0x6c [<ffffffff814c9689>] print_trailer+0xf9/0x150 [<ffffffff814ceda4>] object_err+0x34/0x40 [<ffffffff814d1231>] kasan_report_error+0x221/0x530 [<ffffffff814d1673>] __asan_report_load8_noabort+0x43/0x50 [<ffffffffa0043637>] _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] [<ffffffffa0049a51>] mpt3sas_base_attach+0x1991/0x2120 [mpt3sas] [<ffffffffa0053c93>] _scsih_probe+0xeb3/0x16b0 [mpt3sas] [<ffffffff81ebd047>] local_pci_probe+0xc7/0x170 [<ffffffff81ebf2cf>] pci_device_probe+0x20f/0x290 [<ffffffff820d50cd>] really_probe+0x17d/0x600 [<ffffffff820d56a3>] __driver_attach+0x153/0x190 [<ffffffff820cffac>] bus_for_each_dev+0x11c/0x1a0 [<ffffffff820d421d>] driver_attach+0x3d/0x50 [<ffffffff820d378a>] bus_add_driver+0x44a/0x5f0 [<ffffffff820d666c>] driver_register+0x18c/0x3b0 [<ffffffff81ebcb76>] __pci_register_driver+0x156/0x200 [<ffffffffa00c8135>] _mpt3sas_init+0x135/0x1000 [mpt3sas] [<ffffffff81000423>] do_one_initcall+0x113/0x2b0 [<ffffffff813caa5a>] do_init_module+0x1d0/0x4d8 [<ffffffff81273909>] load_module+0x6729/0x8dc0 [<ffffffff81276123>] SYSC_init_module+0x183/0x1a0 [<ffffffff8127625e>] SyS_init_module+0xe/0x10 [<ffffffff828fe7d7>] entry_SYSCALL_64_fastpath+0x12/0x6a Fix this by pulling the value at the beginning of the loop. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jens Axboe <axboe@fb.com> Acked-by:
Chaitra Basappa <chaitra.basappa@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit cb710ab1 ] We already check if the message is empty before calling the client tx_done callback. Calling completion on a wait event is also invalid if the message is empty. This patch moves the existing empty message check earlier. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit cc6eeaa3 ] If a wait_for_completion_timeout() call returns due to a timeout, complete() can get called after returning from the wait which is incorrect and can cause subsequent transmissions on a channel to fail. Since the wait_for_completion_timeout() sees the completion variable is non-zero caused by the erroneous/spurious complete() call, and it immediately returns without waiting for the time as expected by the client. This patch fixes the issue by skipping complete() call for the timer expiry. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Reported-by:
Alexey Klimov <alexey.klimov@arm.com> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit c61b781e ] There exists a race when msg_submit return immediately as there was an active request being processed which may have completed just before it's checked again in mbox_send_message. This will result in return to the caller without waiting in mbox_send_message even when it's blocking Tx. This patch fixes the issue by waiting for the completion always if Tx is in blocking mode. Fixes: 2b6d83e2 ("mailbox: Introduce framework for mailbox") Reported-by:
-
Lior David authored
[ Upstream commit dfb5b098 ] When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by:
Lior David <qca_liord@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Michal Kazior authored
[ Upstream commit 18ae68ff ] WMI ops wrappers did not properly check for null function pointers for spectral scan. This caused null dereference crash with WMI-TLV based firmware which doesn't implement spectral scan. The crash could be triggered with: ip link set dev wlan0 up echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl The crash looked like this: [ 168.031989] BUG: unable to handle kernel NULL pointer dereference at (null) [ 168.037406] IP: [< (null)>] (null) [ 168.040395] PGD cdd4067 PUD fa0f067 PMD 0 [ 168.043303] Oops: 0010 [#1] SMP [ 168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211] [ 168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G W O 4.8.0 #78 [ 168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000 [ 168.061736] RIP: 0010:[<0000000000000000>] [< (null)>] (null) ... [ 168.100620] Call Trace: [ 168.101910] [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core] [ 168.104871] [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0 [ 168.106696] [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core] [ 168.109618] [<ffffffff812da3a1>] full_proxy_write+0x51/0x80 [ 168.111443] [<ffffffff811957b8>] __vfs_write+0x28/0x120 [ 168.113090] [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0 [ 168.114932] [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60 [ 168.116680] [<ffffffff811965f8>] vfs_write+0xb8/0x1a0 [ 168.118293] [<ffffffff81197966>] SyS_write+0x46/0xa0 [ 168.119912] [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 168.121737] Code: Bad RIP value. [ 168.123318] RIP [< (null)>] (null) Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
