- 30 May, 2019 19 commits
-
-
Willem de Bruijn authored
TCP zerocopy takes a uarg reference for every skb, plus one for the tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero as it builds, sends and frees skbs inside its inner loop. UDP and RAW zerocopy do not send inside the inner loop so do not need the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit 52900d22288ed ("udp: elide zerocopy operation in hot path") introduced extra_uref to pass the initial reference taken in sock_zerocopy_alloc to the first generated skb. But, sock_zerocopy_realloc takes this extra reference at the start of every call. With MSG_MORE, no new skb may be generated to attach the extra_uref to, so refcnt is incorrectly 2 with only one skb. Do not take the extra ref if uarg && !tcp, which implies MSG_MORE. Update extra_uref accordingly. This conditional assignment triggers a false positive may be used uninitialized warning, so have to initialize extra_uref at define. Changes v1->v2: fix typo in Fixes SHA1 Fixes: 52900d22 ("udp: elide zerocopy operation in hot path") Reported-by:syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
When parsing an ethtool flow spec to build a flow_rule, the code checks if both the vlan etype and the vlan tci are specified by the user to add a FLOW_DISSECTOR_KEY_VLAN match. However, when the user only specified a vlan etype or a vlan tci, this check silently ignores these parameters. For example, the following rule : ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0 will result in no error being issued, but the equivalent rule will be created and passed to the NIC driver : ethtool -N eth0 flow-type udp4 action -1 loc 0 In the end, neither the NIC driver using the rule nor the end user have a way to know that these keys were dropped along the way, or that incorrect parameters were entered. This kind of check should be left to either the driver, or the ethtool flow spec layer. This commit makes so that ethtool parameters are forwarded as-is to the NIC driver. Since none of the users of ethtool_rx_flow_rule_create are using the VLAN dissector, I don't think this qualifies as a regression. Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Pablo Neira Ayuso <pablo@gnumonks.org> Signed-off-by:
-
Jakub Kicinski authored
af_inet sets sock->sk to NULL which trips strparser over: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.2.0-rc1-00139-g14629453a6d3 #21 RIP: 0010:tcp_peek_len+0x10/0x60 RSP: 0018:ffffc02e41c54b98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9cf924c4e030 RCX: 0000000000000051 RDX: 0000000000000000 RSI: 000000000000000c RDI: ffff9cf97128f480 RBP: ffff9cf9365e0300 R08: ffff9cf94fe7d2c0 R09: 0000000000000000 R10: 000000000000036b R11: ffff9cf939735e00 R12: ffff9cf91ad9ae40 R13: ffff9cf924c4e000 R14: ffff9cf9a8fcbaae R15: 0000000000000020 FS: 0000000000000000(0000) GS:ffff9cf9af7c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 000000013920a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> strp_data_ready+0x48/0x90 tls_data_ready+0x22/0xd0 [tls] tcp_rcv_established+0x569/0x620 tcp_v4_do_rcv+0x127/0x1e0 tcp_v4_rcv+0xad7/0xbf0 ip_protocol_deliver_rcu+0x2c/0x1c0 ip_local_deliver_finish+0x41/0x50 ip_local_deliver+0x6b/0xe0 ? ip_protocol_deliver_rcu+0x1c0/0x1c0 ip_rcv+0x52/0xd0 ? ip_rcv_finish_core.isra.20+0x380/0x380 __netif_receive_skb_one_core+0x7e/0x90 netif_receive_skb_internal+0x42/0xf0 napi_gro_receive+0xed/0x150 nfp_net_poll+0x7a2/0xd30 [nfp] ? kmem_cache_free_bulk+0x286/0x310 net_rx_action+0x149/0x3b0 __do_softirq+0xe3/0x30a ? handle_irq_event_percpu+0x6a/0x80 irq_exit+0xe8/0xf0 do_IRQ+0x85/0xd0 common_interrupt+0xf/0xf </IRQ> RIP: 0010:cpuidle_enter_state+0xbc/0x450 To avoid this issue set sock->sk after sk_prot->close. My grepping and testing did not discover any code which would depend on the current behaviour. Fixes: c46234eb ("tls: RX path for ktls") Reported-by:
David Beckett <david.beckett@netronome.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Eric Dumazet authored
If a network driver provides to napi_gro_frags() an skb with a page fragment of exactly 14 bytes, the call to gro_pull_from_frag0() will 'consume' the fragment by calling skb_frag_unref(skb, 0), and the page might be freed and reused. Reading eth->h_proto at the end of napi_frags_skb() might read mangled data, or crash under specific debugging features. BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline] BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 Read of size 2 at addr ffff88809366840c by task syz-executor599/8957 CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142 napi_frags_skb net/core/dev.c:5833 [inline] napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037 call_write_iter include/linux/fs.h:1872 [inline] do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693 do_iter_write fs/read_write.c:970 [inline] do_iter_write+0x184/0x610 fs/read_write.c:951 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015 do_writev+0x15b/0x330 fs/read_write.c:1058 Fixes: a50e233c ("net-gro: restore frag0 optimization") Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for DSA tagging using 802.1Q During the prototyping for the "Decoupling PHYLINK from struct net_device" patchset, the CPU port of the sja1105 driver was moved to a different spot. This uncovered an issue in the tag_8021q DSA code, which used to work by mistake - the CPU port was the last hardware port numerically, and this was masking an ordering issue which is very likely to be seen in other drivers that make use of 802.1Q tags. A question was also raised whether the VID numbers bear any meaning, and the conclusion was that they don't, at least not in an absolute sense. The second patch defines bit fields inside the DSA 802.1Q VID so that tcpdump can decode it unambiguously (although the meaning is now clear even by visual inspection). ==================== Signed-off-by: -
Vladimir Oltean authored
Tools like tcpdump need to be able to decode the significance of fake VLAN headers that DSA uses to separate switch ports. But currently these have no global significance - they are simply an ordered list of DSA_MAX_SWITCHES x DSA_MAX_PORTS numbers ending at 4095. The reason why this is submitted as a fix is that the existing mapping of VIDs should not enter into a stable kernel, so we can pretend that only the new format exists. This way tcpdump won't need to try to make something out of the VLAN tags on 5.2 kernels. Fixes: f9bbe447 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ioana Ciornei authored
The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on the CPU port. For the ingress path of a 802.1Q switch to work, the RX VID of a port needs to be seen as tagged egress on the CPU port. While configuring the other front-panel ports to be part of this VID, for bridge scenarios, the untagged flag is applied even on the CPU port in dsa_switch_vlan_add. This happens because DSA applies the same flags on the CPU port as on the (bridge-controlled) slave ports, and the effect in this case is that the CPU port tagged settings get deleted. Instead of fixing DSA by introducing a way to control VLAN flags on the CPU port (and hence stop inheriting from the slave ports) - a hard, perhaps intractable problem - avoid this situation by moving the setup part of the RX VID on the CPU port after all the other front-panel ports have been added to the VID. Fixes: f9bbe447 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Antoine Tenart authored
MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but the current code is passing the global tx queue offset, so it ends up writing to unknown registers (between 0x8280 and 0x82fc, which seemed to be unused by the hardware). This fixes the issue by using the logical queue id instead. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Young Xiao authored
The TCP option parsing routines in tcp_parse_options function could read one byte out of the buffer of the TCP options. 1 while (length > 0) { 2 int opcode = *ptr++; 3 int opsize; 4 5 switch (opcode) { 6 case TCPOPT_EOL: 7 return; 8 case TCPOPT_NOP: /* Ref: RFC 793 section 3.1 */ 9 length--; 10 continue; 11 default: 12 opsize = *ptr++; //out of bound access If length = 1, then there is an access in line2. And another access is occurred in line 12. This would lead to out-of-bound access. Therefore, in the patch we check that the available data length is larger enough to pase both TCP option code and size. Signed-off-by:Young Xiao <92siuyang@gmail.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Two small fixes Patch #1 from Jiri fixes an issue specific to Spectrum-2 where the insertion of two identical flower filters with different priorities would trigger a warning. Patch #2 from Amit prevents the driver from trying to configure a port with a speed of 56Gb/s and autoneg off as this is not supported and results in error messages from firmware. Please consider patch #1 for stable. ==================== Signed-off-by: -
Amit Cohen authored
Force of 56G is not supported by hardware in Ethernet devices. This configuration fails with a bad parameter error from firmware. Add check of this case. Instead of trying to set 56G with autoneg off, return a meaningful error. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
When identical rules are inserted, the latter one goes to C-TCAM. For that, a second eRP with the same mask is created. These 2 eRPs by the nature cannot be merged and also one cannot be parent of another. Teach mlxsw_sp_acl_erp_delta_fill() about this possibility and handle it gracefully. Reported-by:
Alex Kushnarov <alexanderk@mellanox.com> Fixes: c22291f7 ("mlxsw: spectrum: acl: Implement delta for ERP") Signed-off-by:
-
Rasmus Villemoes authored
Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends up in bits 47:32 of the return value, instead of bits 31:16 as they should. Fixes: 6e46e2d8 ("net: dsa: mv88e6xxx: Fix u64 statistics") Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
(At least) RTL8168e forgets its MAC address in PCI D3. To fix this set the MAC address when resuming. For resuming from runtime-suspend we had this in place already, for resuming from S3/S5 it was missing. The commit referenced as being fixed isn't wrong, it's just the first one where the patch applies cleanly. Fixes: 0f07bd85 ("r8169: use dev_get_drvdata where possible") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reported-by:
Albert Astals Cid <aacid@kde.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-05-28 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.13: ('net/mlx5: Allocate root ns memory using kzalloc to match kfree') For -stable v4.16: ('net/mlx5: Avoid double free in fs init error unwinding path') For -stable v4.18: ('net/mlx5e: Disable rxhash when CQE compress is enabled') ==================== Signed-off-by: -
David S. Miller authored
Stephen Hemminger says: ==================== XDP generic fixes This set of patches came about while investigating XDP generic on Azure. The split brain nature of the accelerated networking exposed issues with the stack device model. ==================== Signed-off-by: -
Stephen Hemminger authored
When a device is stacked like (team, bonding, failsafe or netvsc) the XDP generic program for the parent device was not called. Move the call to XDP generic inside __netif_receive_skb_core where it can be done multiple times for stacked case. Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
The netvsc VF skb handler should make sure that skb is not shared. Similar logic already exists in bonding and team device drivers. This is not an issue in practice because the VF devicex does not send up shared skb's. But the netvsc driver should do the right thing if it did. Fixes: 0c195567 ("netvsc: transparent VF management") Signed-off-by:
-
Sean Tranchetti authored
Currently, when resegmenting an unexpected UDP GRO packet, the full UDP checksum will be calculated for every new SKB created by skb_segment() because the netdev features passed in by udp_rcv_segment() lack any information about checksum offload capabilities. Usually, we have no need to perform this calculation again, as 1) The GRO implementation guarantees that any packets making it to the udp_rcv_segment() function had correct checksums, and, more importantly, 2) Upon the successful return of udp_rcv_segment(), we immediately pull the UDP header off and either queue the segment to the socket or hand it off to a new protocol handler. Unless userspace has set the IP_CHECKSUM sockopt to indicate that they want the final checksum values, we can pass the needed netdev feature flags to __skb_gso_segment() to avoid checksumming each segment in skb_segment(). Fixes: cf329aa4 ("udp: cope with UDP GRO packet misdirection") Cc: Paolo Abeni <pabeni@redhat.com> Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:Sean Tranchetti <stranche@codeaurora.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
- 29 May, 2019 17 commits
-
-
David S. Miller authored
Max Uvarov says: ==================== net: phy: dp83867: add some fixes v3: use phy_modify_mmd() v2: fix minor comments by Heiner Kallweit and Florian Fainelli ==================== Signed-off-by: -
Max Uvarov authored
PHY_INTERFACE_MODE_RGMII_RXID is less then TXID so code to set tx delay is never called. Fixes: 2a10154a ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by:
Max Uvarov <muvarov@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Max Uvarov authored
Phy state machine calls _config_init just after reset. Signed-off-by:
-
Max Uvarov authored
After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01). That is not enough to finalize autonegatiation on some devices. Increase this timer duration to maximum supported 16ms. Signed-off-by:
-
Max Uvarov authored
For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit of DP83867_10M_SGMII_CFG register has to be cleared by software. That does not affect speeds 100 and 1000 so can be done on init. Signed-off-by:
-
Russell King authored
Some boards do not have the PHY firmware programmed in the 3310's flash, which leads to the PHY not working as expected. Warn the user when the PHY fails to boot the firmware and refuse to initialise. Fixes: 20b2af32 ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King authored
Ensure that we supply the same phy interface mode to mac_link_down() as we did for the corresponding mac_link_up() call. This ensures that MAC drivers that use the phy interface mode in these methods can depend on mac_link_down() always corresponding to a mac_link_up() call for the same interface mode. Signed-off-by:
-
Yoshihiro Shimoda authored
The sh_eth_close() resets the MAC and then calls phy_stop() so that mdio read access result is incorrect without any error according to kernel trace like below: ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff According to the hardware manual, the RMII mode should be set to 1 before operation the Ethernet MAC. However, the previous code was not set to 1 after the driver issued the soft_reset in sh_eth_dev_exit() so that the mdio read access result seemed incorrect. To fix the issue, this patch adds a condition and set the RMII mode register in sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs. Note that when I have tried to move the sh_eth_dev_exit() calling after phy_stop() on sh_eth_close(), but it gets worse (kernel panic happened and it seems that a register is accessed while the clock is off). Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Saeed Mahameed authored
When CQE compression is enabled (Multi-host systems), compressed CQEs might arrive to the driver rx, compressed CQEs don't have a valid hash offload and the driver already reports a hash value of 0 and invalid hash type on the skb for compressed CQEs, but this is not good enough. On a congested PCIe, where CQE compression will kick in aggressively, gro will deliver lots of out of order packets due to the invalid hash and this might cause a serious performance drop. The only valid solution, is to disable rxhash offload at all when CQE compression is favorable (Multi-host systems). Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
wenxu authored
When register indr block for vlan device, it should check the real_dev of vlan device is same as uplink device. Or it will set offload rule to mlx5e which will never hit. Fixes: 35a605db ("net/mlx5e: Offload TC e-switch rules with ingress VLAN device") Signed-off-by:
wenxu <wenxu@ucloud.cn> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Parav Pandit authored
root ns is yet another fs core node which is freed using kfree() by tree_put_node(). Rest of the other fs core objects are also allocated using kmalloc variants. However, root ns memory is allocated using kvzalloc(). Hence allocate root ns memory using kzalloc(). Fixes: 25302363 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Parav Pandit authored
In below code flow, for ingress acl table root ns memory leads to double free. mlx5_init_fs init_ingress_acls_root_ns() init_ingress_acl_root_ns kfree(steering->esw_ingress_root_ns); /* steering->esw_ingress_root_ns is not marked NULL */ mlx5_cleanup_fs cleanup_ingress_acls_root_ns steering->esw_ingress_root_ns non NULL check passes. kfree(steering->esw_ingress_root_ns); /* double free */ Similar issue exist for other tables. Hence zero out the pointers to not process the table again. Fixes: 9b93ab98 ("net/mlx5: Separate ingress/egress namespaces for each vport") Fixes: 40c3eebb49e51 ("net/mlx5: Add support in RDMA RX steering") Signed-off-by: -
Parav Pandit authored
When root ns setup for rdma, sniffer tx and sniffer rx fails, such root ns cleanup is done by the error unwinding path of mlx5_cleanup_fs(). Below call graph shows an example for sniffer_rx_root_ns. mlx5_init_fs() init_sniffer_rx_root_ns() cleanup_root_ns(steering->sniffer_rx_root_ns); mlx5_cleanup_fs() cleanup_root_ns(steering->sniffer_rx_root_ns); /* double free of sniffer_rx_root_ns */ Hence, use the existing cleanup_fs to cleanup. Fixes: d83eb50e ("net/mlx5: Add support in RDMA RX steering") Fixes: 87d22483 ("net/mlx5: Add sniffer namespaces") Signed-off-by: -
Saeed Mahameed authored
In case mlx5_core_set_hca_defaults fails, it should jump to mlx5_cleanup_fs, fix that. Fixes: c85023e1 ("IB/mlx5: Add raw ethernet local loopback support") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
Both sysfs-bus-mdio and sysfs-class-net-phydev contain the same duplication information. There is not currently any MDIO bus specific attribute, but there are PHY device (struct phy_device) specific attributes. Use the more precise description from sysfs-bus-mdio and carry that over to sysfs-class-net-phydev. Fixes: 86f22d04 ("net: sysfs: Document PHY device sysfs attributes") Signed-off-by:
-
Eric Dumazet authored
If llc_mac_hdr_init() returns an error, we must drop the skb since no llc_build_and_send_ui_pkt() caller will take care of this. BUG: memory leak unreferenced object 0xffff8881202b6800 (size 2048): comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.590s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 1a 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<00000000e25b5abe>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000e25b5abe>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000e25b5abe>] slab_alloc mm/slab.c:3326 [inline] [<00000000e25b5abe>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000e25b5abe>] __kmalloc+0x161/0x2c0 mm/slab.c:3669 [<00000000a1ae188a>] kmalloc include/linux/slab.h:552 [inline] [<00000000a1ae188a>] sk_prot_alloc+0xd6/0x170 net/core/sock.c:1608 [<00000000ded25bbe>] sk_alloc+0x35/0x2f0 net/core/sock.c:1662 [<000000002ecae075>] llc_sk_alloc+0x35/0x170 net/llc/llc_conn.c:950 [<00000000551f7c47>] llc_ui_create+0x7b/0x140 net/llc/af_llc.c:173 [<0000000029027f0e>] __sock_create+0x164/0x250 net/socket.c:1430 [<000000008bdec225>] sock_create net/socket.c:1481 [inline] [<000000008bdec225>] __sys_socket+0x69/0x110 net/socket.c:1523 [<00000000b6439228>] __do_sys_socket net/socket.c:1532 [inline] [<00000000b6439228>] __se_sys_socket net/socket.c:1530 [inline] [<00000000b6439228>] __x64_sys_socket+0x1e/0x30 net/socket.c:1530 [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff88811d750d00 (size 224): comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.600s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 f0 0c 24 81 88 ff ff 00 68 2b 20 81 88 ff ff ...$.....h+ .... backtrace: [<0000000053026172>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000053026172>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000053026172>] slab_alloc_node mm/slab.c:3269 [inline] [<0000000053026172>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000fa8f3c30>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<00000000d96fdafb>] alloc_skb include/linux/skbuff.h:1058 [inline] [<00000000d96fdafb>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327 [<000000000a34a2e7>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225 [<00000000ee39999b>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242 [<00000000e034d810>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933 [<00000000c0bc8445>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000c0bc8445>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<000000003b687167>] __sys_sendto+0x148/0x1f0 net/socket.c:1964 [<00000000922d78d9>] __do_sys_sendto net/socket.c:1976 [inline] [<00000000922d78d9>] __se_sys_sendto net/socket.c:1972 [inline] [<00000000922d78d9>] __x64_sys_sendto+0x2a/0x30 net/socket.c:1972 [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: -
Stefano Brivio authored
In the pmtu_vti6_link_change_mtu test, both local and remote addresses for the vti6 tunnel are assigned to the same address given to the dummy interface that we use as encapsulating device with a known MTU. This works as long as the dummy interface is actually selected, via rt6_lookup(), as encapsulating device. But if the remote address of the tunnel is a local address too, the loopback interface could also be selected, and there's nothing wrong with it. This is what some older -stable kernels do (3.18.z, at least), and nothing prevents us from subtly changing FIB implementation to revert back to that behaviour in the future. Define an IPv6 prefix instead, and use two separate addresses as local and remote for vti6, so that the encapsulating device can't be a loopback interface. Reported-by:
Xiumei Mu <xmu@redhat.com> Fixes: 1fad59ea ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
- 28 May, 2019 3 commits
-
-
Madalin Bucur authored
Make sure only the portals for the online CPUs are used. Without this change, there are issues when someone boots with maxcpus=n, with n < actual number of cores available as frames either received or corresponding to the transmit confirmation path would be offered for dequeue to the offline CPU portals, getting lost. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Jisheng Zhang authored
Fix below issues in err code path of probe: 1. we don't need to unregister_netdev() because the netdev isn't registered. 2. when register_netdev() fails, we also need to destroy bm pool for HWBM case. Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Thierry Reding authored
If the subdriver defers probe, do not show an error message. It's perfectly fine for this error to occur since the driver will get another chance to probe after some time and will usually succeed after all of the resources that it requires have been registered. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
- 27 May, 2019 1 commit
-
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: various fixes May, 2019 Here is a set of various bug fixes found on recent verification stage. ==================== Signed-off-by:
-
