- 17 Sep, 2014 3 commits
-
-
Jan Kara authored
commit 77ea2a4b upstream. free_holes_block() passed local variable as a block pointer to ext4_clear_blocks(). Thus ext4_clear_blocks() zeroed out this local variable instead of proper place in inode / indirect block. We later zero out proper place in inode / indirect block but don't dirty the inode / buffer again which can lead to subtle issues (some changes e.g. to inode can be lost). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Kevin Hao authored
commit a152056c upstream. I got the following panic on my fsl p5020ds board. Unable to handle kernel paging request for data at address 0x7375627379737465 Faulting instruction address: 0xc000000000100778 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 CoreNet Generic Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145 task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000 NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000 REGS: c0000000fe08aa00 TRAP: 0300 Not tainted (3.15.0-next-20140613) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad2e24 XER: 00000000 DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1 GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80 GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000 GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200 GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000 GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8 GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10 GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400 GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80 NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168 LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168 Call Trace: [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable) [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90 [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130 [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64 [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8 [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384 [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8 [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654 [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4 [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514 [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4 [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94 [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368 [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104 [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734 [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84 [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104 [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4 [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38 [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158 [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80 [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30 [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238 [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268 [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008 7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2 ---[ end trace b4c9a94804a42d40 ]--- It seems that the corrupted partition header on my mtd device triggers a bug in the ftl. In function build_maps() it will allocate the buffers needed by the mtd partition, but if something goes wrong such as kmalloc failure, mtd read error or invalid partition header parameter, it will free all allocated buffers and then return non-zero. In my case, it seems that partition header parameter 'NumTransferUnits' is invalid. And the ftl_freepart() is a function which free all the partition buffers allocated by build_maps(). Given the build_maps() is a self cleaning function, so there is no need to invoke this function even if build_maps() return with error. Otherwise it will causes the buffers to be freed twice and then weird things would happen. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Peter Hurley authored
commit ae84db96 upstream. When a tty is opened for the serial console, the termios c_cflag settings are inherited from the console line settings. However, if the tty is subsequently closed, the termios settings are lost. This results in a garbled console if the console is later suspended and resumed. Preserve the termios c_cflag for the serial console when the tty is shutdown; this reflects the most recent line settings. Fixes: Bugzilla #69751, 'serial console does not wake from S3' Reported-by:
Valerio Vanni <valerio.vanni@inwind.it> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 15 Sep, 2014 22 commits
-
-
Steven Rostedt authored
commit 485d4402 upstream. [ I'm currently running my tests on it now, and so far, after a few hours it has yet to blow up. I'll run it for 24 hours which it never succeeded in the past. ] The tracing code has a way to make directories within the debugfs file system as well as deleting them using mkdir/rmdir in the instance directory. This is very limited in functionality, such as there is no renames, and the parent directory "instance" can not be modified. The tracing code creates the instance directory from the debugfs code and then replaces the dentry->d_inode->i_op with its own to allow for mkdir/rmdir to work. When these are called, the d_entry and inode locks need to be released to call the instance creation and deletion code. That code has its own accounting and locking to serialize everything to prevent multiple users from causing harm. As the parent "instance" directory can not be modified this simplifies things. I created a stress test that creates several threads that randomly creates and deletes directories thousands of times a second. The code stood up to this test and I submitted it a while ago. Recently I added a new test that adds readers to the mix. While the instance directories were being added and deleted, readers would read from these directories and even enable tracing within them. This test was able to trigger a bug: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 3 PID: 17789 Comm: rmdir Tainted: G W 3.15.0-rc2-test+ #41 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000 RIP: 0010:[<ffffffff811ed5eb>] [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367 RSP: 0018:ffff880077019df8 EFLAGS: 00010246 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7 FS: 00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0 Stack: ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640 0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000 00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28 Call Trace: [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3 [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139 [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08 RIP [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367 RSP <ffff880077019df8> It took a while, but every time it triggered, it was always in the same place: list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) { Where the child->d_u.d_child seemed to be corrupted. I added lots of trace_printk()s to see what was wrong, and sure enough, it was always the child's d_u.d_child field. I looked around to see what touches it and noticed that in __dentry_kill() which calls dentry_free(): static void dentry_free(struct dentry *dentry) { /* if dentry was never visible to RCU, immediate free is OK */ if (!(dentry->d_flags & DCACHE_RCUACCESS)) __d_free(&dentry->d_u.d_rcu); else call_rcu(&dentry->d_u.d_rcu, __d_free); } I also noticed that __dentry_kill() unlinks the child->d_u.child under the parent->d_lock spin_lock. Looking back at the loop in debugfs_remove_recursive() it never takes the parent->d_lock to do the list walk. Adding more tracing, I was able to prove this was the issue: ftrace-t-15385 1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600 rmdir-15409 2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058 The dentry_kill freed ffff88006d573600 just as the remove recursive was walking it. In order to fix this, the list walk needs to be modified a bit to take the parent->d_lock. The safe version is no longer necessary, as every time we remove a child, the parent->d_lock must be released and the list walk must start over. Each time a child is removed, even though it may still be on the list, it should be skipped by the first check in the loop: if (!debugfs_positive(child)) continue; Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Bryan O'Donoghue authored
commit 6e693739 upstream. The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000 USB host controller, and the default value is 0x20 dwords. The in/out threshold can be programmed to 0x80 dwords (512 Bytes) to maximize the perfomrance, but only when isochronous/interrupt transactions are not initiated by the USB host controller. This patch is to reconfigure the packet buffer in/out threshold as maximal as possible to maximize the performance, and 0x7F dwords (508 Bytes) should be used because the USB host controller initiates isochronous/interrupt transactions. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Dave Chiluk authored
commit b76fc285 upstream. Stable_kernel_rules should point submitters of network stable patches to the netdev_FAQ.txt as requests for stable network patches should go to netdev first. Signed-off-by:
Dave Chiluk <chiluk@canonical.com> Signed-off-by:
-
David E. Box authored
commit 8aa5e56e upstream. Adds return status check on copy routines to delete the allocated destination object if either copy fails. Reported by Colin Ian King on bugs.acpica.org, Bug 1087. The last applicable commit: Commit: 3371c19c Subject: ACPICA: Remove ACPI_GET_OBJECT_TYPE macro Link: https://bugs.acpica.org/show_bug.cgi?id=1087Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Guido Martínez authored
commit c9a3ad25 upstream. display_timings_release calls kfree on the display_timings object passed to it. Calling kfree after it is wrong. SLUB debug showed the following warning: ============================================================================= BUG kmalloc-64 (Tainted: G W ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in of_get_display_timings+0x2c/0x214 age=601 cpu=0 pid=884 __slab_alloc.constprop.79+0x2e0/0x33c kmem_cache_alloc+0xac/0xdc of_get_display_timings+0x2c/0x214 panel_probe+0x7c/0x314 [tilcdc] platform_drv_probe+0x18/0x48 [..snip..] INFO: Freed in panel_destroy+0x18/0x3c [tilcdc] age=0 cpu=0 pid=907 __slab_free+0x34/0x330 panel_destroy+0x18/0x3c [tilcdc] tilcdc_unload+0xd0/0x118 [tilcdc] drm_dev_unregister+0x24/0x98 [..snip..] Signed-off-by:
Guido Martínez <guido@vanguardiasur.com.ar> Tested-by:
Darren Etheridge <detheridge@ti.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Guido Martínez authored
commit eb565a2b upstream. Unregister resources in the correct order on tilcdc_drm_fini, which is the reverse order they were registered during tilcdc_drm_init. This also means unregistering the driver before releasing its resources. Signed-off-by:
-
Guido Martínez authored
commit 3a490122 upstream. The driver did not unregister the allocated framebuffer, which caused memory leaks (and memory manager WARNs) when unloading. Also, the framebuffer device under /dev still existed after unloading. Add a call to drm_fbdev_cma_fini when unloading the module to prevent both issues. Signed-off-by:
-
Guido Martínez authored
commit 16dcbdef upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver, otherwise we will get a warning about a duplicate filename in sysfs. Signed-off-by:
-
Guido Martínez authored
commit daa15b4c upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: tda998x 0-0070: found TDA19988 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 825 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-HDMI-A-1' Modules linked in: [..] CPU: 0 PID: 825 Comm: modprobe Not tainted 3.15.0-rc4-00027-g9dcdef4 #82 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1b40>] (slave_modeset_init+0x120/0x1bc [tilcdc]) [<bf0b1b40>] (slave_modeset_init [tilcdc]) from [<bf0b2be8>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2be8>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [..snip..] ---[ end trace 4df8d614936ebdee ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by:
-
Guido Martínez authored
commit e396900e upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 824 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-LVDS-1' Modules linked in: [...] CPU: 0 PID: 824 Comm: modprobe Not tainted 3.15.0-rc4-00027-g6484f96-dirty #81 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1fec>] (panel_modeset_init+0xb8/0x134 [tilcdc]) [<bf0b1fec>] (panel_modeset_init [tilcdc]) from [<bf0b2bf0>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2bf0>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [ .. snip .. ] ---[ end trace b2d09cd9578b0497 ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by:
-
Sylwester Nawrocki authored
commit d3d4e524 upstream. We should save/restore relevant I2S registers regardless of the dai->active flag, otherwise some settings are being lost after system suspend/resume cycle. E.g. I2S slave mode set only during dai initialization is not preserved and the device ends up in master mode after system resume. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Nikesh Oswal authored
commit 5b919f3e upstream. WM5110/8280 devices do not support bypass mode for LDO1 so remove the bypass callbacks registered with regulator core. Signed-off-by:
Nikesh Oswal <nikesh@opensource.wolfsonmicro.com> Signed-off-by:
-
Praveen Diwakar authored
commit 0a37c6ef upstream. Since MODULE_LICENSE is missing the module load fails, so add this for module. Signed-off-by:
Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Daniel Mack authored
commit 3ad80b82 upstream. Fix a long standing bug in the read register routing of adau1701. The bytes arrive in the buffer in big-endian, so the result has to be shifted before and-ing the bytes in the loop. Signed-off-by:
Daniel Mack <zonque@gmail.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Chin-Ran Lo authored
commit 396e04f4 upstream. After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete suspend procedure. Without this patch the suspend handler would return success earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event comes in the controller driver could have already turned off the bus clock. This causes kernel crash or system reboot eventually. Signed-off-by:
Chin-Ran Lo <crlo@marvell.com> Signed-off-by:
Jeff CF Chen <jeffc@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Arnd Bergmann authored
commit e1f8859e upstream. The interrupt handler in the ux500 crypto driver has an obviously incorrect way to access the data buffer, which for a while has caused this build warning: ../ux500/cryp/cryp_core.c: In function 'cryp_interrupt_handler': ../ux500/cryp/cryp_core.c:234:5: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default] writel_relaxed(ctx->indata, ^ In file included from ../include/linux/swab.h:4:0, from ../include/uapi/linux/byteorder/big_endian.h:12, from ../include/linux/byteorder/big_endian.h:4, from ../arch/arm/include/uapi/asm/byteorder.h:19, from ../include/asm-generic/bitops/le.h:5, from ../arch/arm/include/asm/bitops.h:340, from ../include/linux/bitops.h:33, from ../include/linux/kernel.h:10, from ../include/linux/clk.h:16, from ../drivers/crypto/ux500/cryp/cryp_core.c:12: ../include/uapi/linux/swab.h:57:119: note: expected '__u32' but argument is of type 'const u8 *' static inline __attribute_const__ __u32 __fswab32(__u32 val) There are at least two, possibly three problems here: a) when writing into the FIFO, we copy the pointer rather than the actual data we want to give to the hardware b) the data pointer is an array of 8-bit values, while the FIFO is 32-bit wide, so both the read and write access fail to do a proper type conversion c) This seems incorrect for big-endian kernels, on which we need to byte-swap any register access, but not normally FIFO accesses, at least the DMA case doesn't do it either. This converts the bogus loop to use the same readsl/writesl pair that we use for the two other modes (DMA and polling). This is more efficient and consistent, and probably correct for endianess. The bug has existed since the driver was first merged, and was probably never detected because nobody tried to use interrupt mode. It might make sense to backport this fix to stable kernels, depending on how the crypto maintainers feel about that. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: linux-crypto@vger.kernel.org Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Qiao Zhou authored
commit 7ed9de76 upstream. we need to release dapm widget list after dpcm_path_get in soc_dpcm_runtime_update. otherwise, there will be potential memory leak. add dpcm_path_put to fix it. Signed-off-by:
Qiao Zhou <zhouqiao@marvell.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 64ea37bb upstream. It seems that there's a bug at au0828 hardware/firmware related to alternate setting: when the device is already at alt 5, a further call causes the URBs to receive -ESHUTDOWN. I found two different encarnations of this issue: 1) at qv4l2, it fails the second time we try to open the video screen; 2) at xawtv, when audio underrun occurs, with is very frequent, at least on my test machine. The fix is simple: just check if alt=5 before calling set_usb_interface(). Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Nadav Amit authored
commit 9e8919ae upstream. Return unhandlable error on inter-privilege level ret instruction. This is since the current emulation does not check the privilege level correctly when loading the CS, and does not pop RSP/SS as needed. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jarkko Nikula authored
commit 4adeb0cc upstream. max98090.c doesn't free the threaded interrupt it requests. This causes an oops when doing "cat /proc/interrupts" after snd-soc-max98090.ko is unloaded. Fix this by requesting the interrupt by using devm_request_threaded_irq(). Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
commit e51daefc upstream. The field is assigned but never read, remove it. This fixes a bug caused by the struct vb2_buffer field not being be the very first field of the vsp1_video_buffer buffer structure as required by videobuf2. Reported-by:
Takanari Hayama <taki@igel.co.jp> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Charles Keepax authored
commit b3831417 upstream. wm1811_micd_stop takes the accdet_lock mutex, and is called from two places, one of which is already holding the accdet_lock. This obviously causes a lock up. This patch fixes this issue by removing the lock from wm1811_micd_stop and ensuring that it is always locked externally. Signed-off-by:
-
- 02 Sep, 2014 15 commits
-
-
Ilan Peer authored
commit 12d423e8 upstream. Instead of always calling ieee80211_beacon_loss() on every missed beacons notification, call this function only if the number of consecutive missed beacons from last rx is higher than a predefined threshold. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Ming Lei authored
commit 0fec08b4 upstream. blk_rq_init() is called in req's complete handler to initialize the request, so the members of start_time and start_time_ns might become inaccurate when it is allocated in future. The patch initializes the two members in blk_mq_rq_ctx_init() to fix the problem. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Clemens Ladisch authored
commit 53da5ebf upstream. The BOSS ME-25 turns out not to have any useful descriptors in its MIDI interface, so its needs a quirk entry after all. Reported-and-tested-by:
Kees van Veen <kees.vanveen@gmail.com> Fixes: 8e5ced83 ("ALSA: usb-audio: remove superfluous Roland quirks") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Kees van Veen <kees.vanveen@gmail.com> Signed-off-by:
-
wenxiong@linux.vnet.ibm.com authored
commit 0c0e6341 upstream. When injecting EEH error to bnx2x adapter, adapter couldn't be recovery and caused recursive EEH errors. The patch fixes the issue. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
wenxiong@linux.vnet.ibm.com authored
commit 9aaae044 upstream. A rmb() is required to ensure that the CQE is not read before it is written by the adapter DMA. PCI ordering rules will make sure the other fields are written before the marker at the end of struct eth_fast_path_rx_cqe but without rmb() a weakly ordered processor can process stale data. Without the barrier we have observed various crashes including bnx2x_tpa_start being called on queues not stopped (resulting in message start of bin not in stop) and NULL pointer exceptions from bnx2x_rx_int. Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
-
Andy Lutomirski authored
commit 7209a75d upstream. This moves the espfix64 logic into native_iret. To make this work, it gets rid of the native patch for INTERRUPT_RETURN: INTERRUPT_RETURN on native kernels is now 'jmp native_iret'. This changes the 16-bit SS behavior on Xen from OOPSing to leaking some bits of the Xen hypervisor's RSP (I think). [ hpa: this is a nonzero cost on native, but probably not enough to measure. Xen needs to fix this in their own code, probably doing something equivalent to espfix64. ] Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit 34273f41 upstream. Embedded systems, which may be very memory-size-sensitive, are extremely unlikely to ever encounter any 16-bit software, so make it a CONFIG_EXPERT option to turn off support for any 16-bit software whatsoever. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.comSigned-off-by:
-
H. Peter Anvin authored
commit 197725de upstream. Make espfix64 a hidden Kconfig option. This fixes the x86-64 UML build which had broken due to the non-existence of init_espfix_bsp() in UML: since UML uses its own Kconfig, this option does not appear in the UML build. This also makes it possible to make support for 16-bit segments a configuration option, for the people who want to minimize the size of the kernel. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
H. Peter Anvin authored
commit 20b68535 upstream. Header guard is #ifndef, not #ifdef... Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit e1fe9ed8 upstream. Sparse warns that the percpu variables aren't declared before they are defined. Rather than hacking around it, move espfix definitions into a proper header file. Reported-by:
-
H. Peter Anvin authored
commit 3891a04a upstream. The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. This causes some 16-bit software to break, but it also leaks kernel state to user space. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 64-bit mode. In checkin: b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels we "solved" this by forbidding 16-bit segments on 64-bit kernels, with the logic that 16-bit support is crippled on 64-bit kernels anyway (no V86 support), but it turns out that people are doing stuff like running old Win16 binaries under Wine and expect it to work. This works around this by creating percpu "ministacks", each of which is mapped 2^16 times 64K apart. When we detect that the return SS is on the LDT, we copy the IRET frame to the ministack and use the relevant alias to return to userspace. The ministacks are mapped readonly, so if IRET faults we promote #GP to #DF which is an IST vector and thus has its own stack; we then do the fixup in the #DF handler. (Making #GP an IST exception would make the msr_safe functions unsafe in NMI/MC context, and quite possibly have other effects.) Special thanks to: - Andy Lutomirski, for the suggestion of using very small stack slots and copy (as opposed to map) the IRET frame there, and for the suggestion to mark them readonly and let the fault promote to #DF. - Konrad Wilk for paravirt fixup and testing. - Borislav Petkov for testing help and useful comments. Reported-by:
Brian Gerst <brgerst@gmail.com> Signed-off-by:
-
H. Peter Anvin authored
commit 7ed6fb9b upstream. This reverts commit fa81511b in preparation of merging in the proper fix (espfix64). Signed-off-by:
-
Jeff Layton authored
commit 6aa23d76 upstream. Currently, the client will attempt to use krb5i in the SETCLIENTID call even if rpc.gssd isn't running. When that fails, it'll then fall back to RPC_AUTH_UNIX. This introduced a delay when mounting if rpc.gssd isn't running, and causes warning messages to pop up in the ring buffer. Check to see if rpc.gssd is running before even attempting to use krb5i auth, and just silently skip trying to do so if it isn't. In the event that the admin is actually trying to mount with krb5*, it will still fail at a later stage of the mount attempt. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Jeff Layton authored
commit 89f84243 upstream. Now that we have a more reliable method to tell if gssd is running, we can replace the sn->gssd_running flag with a function that will query to see if it's up and running. There's also no need to attempt an upcall that we know will fail, so just return -EACCES if gssd isn't running. Finally, fix the warn_gss() message not to claim that that the upcall timed out since we don't necesarily perform one now when gssd isn't running, and remove the extraneous newline from the message. Signed-off-by:
-
Jeff Layton authored
commit 4b9a445e upstream. rpc.gssd will naturally hold open any pipe named */clnt*/gssd that shows up under rpc_pipefs. That behavior gives us a reliable mechanism to tell whether it's actually running or not. Create a new toplevel "gssd" directory in rpc_pipefs when it's mounted. Under that directory create another directory called "clntXX", and then within that a pipe called "gssd". We'll never send an upcall along that pipe, and any downcall written to it will just return -EINVAL. Signed-off-by:
-
