This patch changes B_UINT32 to u32 in
cntrl_SignalingInterface.h.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new `auto_attach()` hook in the `struct comedi_driver` instead
of the old `attach_pci()` hook.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new `auto_attach()` hook in the `struct comedi_driver` instead
of the old `attach_usb()` hook.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add inline helper function `comedi_to_usb_interface()` to get the
pointer to `struct usb_interface` associated with the comedi device.
This pointer is set by the call to `comedi_usb_auto_config()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow `comedi_pci_auto_config()` and `comedi_usb_auto_config()` to use
the new `auto_attach()` hook in the low-level driver's `struct
comedi_driver` if it is set and the `attach_pci()` or `attach_usb()`
hook (for PCI or USB respectively) is `NULL`.

Eventually, the `auto_attach()` hook will be the only way of
auto-configuring hardware devices as comedi devices and the bus-type
specific `attach_pci()` and `attach_usb()` hooks will be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add (and export) generic auto-config function `comedi_auto_config()` to
allow hardware devices on arbitrary bus types (e.g. platform devices,
spi devices, etc.) to be auto-configured as comedi devices.  This uses a
new `auto_attach()` hook in the `struct comedi_driver`.  This new hook
will eventually replace the bus-specific `attach_pci()` and
`attach_usb()` hooks in the low-level comedi drivers.

When the `auto_attach()` hook is called in the low-level driver, the
`hw_dev` member of the `struct comedi_device` will have already been set
to the hardware device passed to `comedi_auto_config()`.  The low-level
driver can convert this to some bus-device wrapper structure pointer,
possibly with the help of the `context` parameter that is passed
unchanged from the `comedi_auto_config()` call.

Also export the existing `comedi_auto_unconfig()` function as the
matching call to `comedi_auto_config()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename `comedi_auto_config()` to `comedi_old_auto_config()`, and
`comedi_auto_config_wrapper()` to `comedi_old_auto_config_wrapper()`.
These functions are deprecated and will be removed once the few
remaining low-level comedi drivers that use them have been updated.
(The low-level drivers in question support auto-configuration of
detected comedi devices, but still use the `attach()` hook in their
`struct comedi_driver` to do so.)

This internal change frees up the name `comedi_auto_config` for future
use.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the type of the context parameter passed to
`comedi_auto_config_helper()` from `void *` to `unsigned long`.  It's
currently just an internal change and all current internal usages pass
pointers in the context, but future uses of this function may pass
integer values or pointer values at the whim of a lower-level comedi
driver and the `unsigned long` type expresses this better as it is
commonly used in the Linux kernel to hold such values.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all code and associated preprocessor logic dependent on an old
LINUX_VERSION_CODE since such code is dead for an in-kernel driver.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a coccinelle warning catched by Fengguang's 0-DAY system:
+ drivers/staging/dgrp/dgrp_net_ops.c:1061:11-27: ERROR: nd is NULL but dereferenced.

Put the "done:" label a bit down would solve this issue.

Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When compiling this driver I get these compile warnings:

ieee80211.h:1227:2: warning: '______f' is static but declared in inline
function 'ieee80211_is_empty_essid' which is not static [enabled by
default]
ieee80211.h:1233:3: warning: '______f' is static but declared in inline
function 'ieee80211_is_empty_essid' which is not static [enabled by
default]
ieee80211.h:1248:2: warning: '______f' is static but declared in inline
function 'ieee80211_is_valid_mode' which is not static [enabled by
default]
ieee80211.h:1253:2: warning: '______f' is static but declared in inline
function 'ieee80211_is_valid_mode' which is not static [enabled by
default]
ieee80211.h:1258:2: warning: '______f' is static but declared in inline
function 'ieee80211_is_valid_mode' which is not static [enabled by
default]
ieee80211.h:1272:3: warning: '______f' is static but declared in inline
function 'ieee80211_get_hdrlen' which is not static [enabled by default]
ieee80211.h:1274:3: warning: '______f' is static but declared in inline
function 'ieee80211_get_hdrlen' which is not static [enabled by default]

These functions are declared as extern inline but not 'overloaded'
anywhere so we can declare them static inline and get rid of the
warnings.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When compiling this driver I get these compile warnings:

rtllib.h:2573:2: warning: '______f' is static but declared in inline
function 'rtllib_is_empty_essid' which is not static [enabled by
default]
rtllib.h:2579:3: warning: '______f' is static but declared in inline
function 'rtllib_is_empty_essid' which is not static [enabled by
default]
rtllib.h:2594:2: warning: '______f' is static but declared in inline
function 'rtllib_is_valid_mode' which is not static [enabled by default]
rtllib.h:2599:2: warning: '______f' is static but declared in inline
function 'rtllib_is_valid_mode' which is not static [enabled by default]
rtllib.h:2604:2: warning: '______f' is static but declared in inline
function 'rtllib_is_valid_mode' which is not static [enabled by default]
rtllib.h:2618:3: warning: '______f' is static but declared in inline
function 'rtllib_get_hdrlen' which is not static [enabled by default]
rtllib.h:2620:3: warning: '______f' is static but declared in inline
function 'rtllib_get_hdrlen' which is not static [enabled by default]

These functions are declared as extern inline but not 'overloaded'
anywhere so we can declare them static inline and get rid of the
warnings.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
- WARNING: printk() should include KERN_ facility level
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch errors.
- ERROR: trailing statements should be on next line
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

copy_from_user() returns the number of bytes remaining to be copied,
and it fails if user pointer is invalid, so return -EFAULT
so that the user gets a FAULT.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typos in csr/netdev.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this macro is used for debugging purposes,

it actually defined as

if (unifi_debug >= 5) {
	printk("unifi: <= %s %d\n", __FUNCTION__, (int)rc);
}

which produces too many of those prints if the unifi_debug is >=5.
remove these calls and the macro itself altogether
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this macro is used for debugging purposes,

it actually defined as

if (unifi_debug >= 5) {
	printk("unifi: <= %s\n", __FUNCTION__);
}

which produces too many of those prints if the unifi_debug is >=5.
remove these calls and the macro itself altogether
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this macro is used for debugging purposes,

it actually defined as

if (unifi_debug >= 5) {
	printk("unifi => %s\n", __FUNCTION__);
}

which produces too many of those prints if the unifi_debug is >=5.
remove these calls and the macro itself altogether
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This resolves the conflict with:
	drivers/staging/comedi/drivers/amplc_dio200.c
and syncs up the changes that happened in the staging directory for
3.7-rc3.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ktest confusion fix from Steven Rostedt:
 "With the v3.7-rc2 kernel, the network cards on my target boxes were
  not being brought up.

  I found that the modules for the network was not being installed.
  This was due to the config CONFIG_MODULES_USE_ELF_RELA that came
  before CONFIG_MODULES, and confused ktest in thinking that
  CONFIG_MODULES=y was not found.

  Ktest needs to test all configs and not just stop if something starts
  with CONFIG_MODULES."

* tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA

Pull minor spi MXS fixes from Mark Brown:
 "These fixes are both pretty minor ones and are driver local."

* tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi: mxs: Terminate DMA in case of DMA timeout
  spi: mxs: Assign message status after transfer finished

Pull arm-soc fixes from Arnd Bergmann:
 "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91.

  These come a little later than I had hoped but unfortunately we had a
  few of these patches cause regressions themselves and had to work out
  how to deal with those in the meantime."

* tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  Revert "ARM i.MX25: Fix PWM per clock lookups"
  ARM: versatile: fix versatile_defconfig
  ARM: mvebu: update defconfig with 3.7 changes
  ARM: at91: fix at91x40 build
  ARM: socfpga: Fix socfpga compilation with early_printk() enabled
  ARM: SPEAr: Remove unused empty files
  MAINTAINERS: Add arm-soc tree entry
  ARM: dts: mxs: add the "clock-names" for gpmi-nand
  ARM: ux500: Correct SDI5 address and add some format changes
  ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT
  ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE
  ARM: at91: drop duplicated config SOC_AT91SAM9 entry
  ARM: at91/i2c: change id to let i2c-at91 work
  ARM: at91/i2c: change id to let i2c-gpio work
  ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
  ARM: at91: fix external interrupt specification in board code
  ARM: at91: fix external interrupts in non-DT case
  ARM: at91: at91sam9g10: fix SOC type detection
  ARM: at91/tc: fix typo in the DT document
  ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500
  ...

Functions generic_file_splice_read and generic_file_splice_write access
the pagecache directly. For block devices these functions must be locked
so that block size is not changed while they are in progress.

This patch is an additional fix for commit b87570f5 ("Fix a crash
when block device is read and block size is changed at the same time")
that locked aio_read, aio_write and mmap against block size change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use rcu_read_lock_sched / rcu_read_unlock_sched / synchronize_sched
instead of rcu_read_lock / rcu_read_unlock / synchronize_rcu.

This is an optimization. The RCU-protected region is very small, so
there will be no latency problems if we disable preempt in this region.

So we use rcu_read_lock_sched / rcu_read_unlock_sched that translates
to preempt_disable / preempt_disable. It is smaller (and supposedly
faster) than preemptible rcu_read_lock / rcu_read_unlock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch introduces new barrier pair light_mb() and heavy_mb() for
percpu rw semaphores.

This patch fixes a bug in percpu-rw-semaphores where a barrier was
missing in percpu_up_write.

This patch improves performance on the read path of
percpu-rw-semaphores: on non-x86 cpus, there was a smp_mb() in
percpu_up_read. This patch changes it to a compiler barrier and removes
the "#if defined(X86) ..." condition.

From: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 92063cee, it
was applied prematurely, causing this build error for
imx_v4_v5_defconfig:

arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init':
arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function)
arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in

Sascha Hauer explains:
> There are several gates missing in clk-imx25.c. I have a patch which
> adds support for them and I seem to have missed that the above depends
> on it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is
no longer the default platform, so we need to enable
CONFIG_ARCH_VERSATILE explicitly in order for that to be selected
rather than the multiplatform configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The split of 370 and XP into two Kconfig options and the multiplatform
kernel support has changed a few Kconfig symbols, so let's update the
mvebu_defconfig file with the latest changes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case"
fixed a run-time error on some at91 platforms but did not apply
the same change to at91x40, which now doesn't build.

This changes at91x40 in the same way that the other platforms
were changed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Use the in-kernel min_t() macro for the one place it was being used.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Joe pointed out that I forgot to remove the documentation, so do that
here.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a bunch of unused #defines.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the kernel, we use C.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
-WARNING: printk() should include KERN_ facility level
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this file includes prototypes that doesnt have a function for them,
and some macros which are never used, remove them instead
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

there are macros and functions that are not used, or their
function is missing, so remove them.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking fixes from David Miller:
 "This is what we usually expect at this stage of the game, lots of
  little things, mostly in drivers.  With the occasional 'oops didn't
  mean to do that' kind of regressions in the core code."

 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann

 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu.

 3) Lost error code on return from _rtl_usb_receive(), from Christian
    Lamparter.

 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka.

 5) Release resources on error in pch_gbe driver, from Veaceslav Falico.

 6) Default hop limit not set correctly in ip6_template_metrics[], fix
    from Li RongQing.

 7) Gianfar PTP code requests wrong kind of resource during probe, fix
    from Wei Yang.

 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin.

 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni
    Shoua, Dotan Barak, and Uri Habusha.

10) usbnet leaks memory on TX path, fix from Hemant Kumar.

11) Use socket state test, rather than presence of FIN bit packet, to
    determine FIONREAD/SIOCINQ value.  Fix from Eric Dumazet.

12) Fix cxgb4 build failure, from Vipul Pandya.

13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket
    info dumps.  From Yuchung Cheng.

14) Fix leak of security path in kfree_skb_partial().  Fix from Eric
    Dumazet.

15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from
    Veaceslav Falico.

16) Fix MAINTAINERS file pattern for networking drivers, from Jean
    Delvare.

17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit.

18) VLAN device type change restriction is too strict, and should not
    trigger for the automatically generated vlan0 device.  Fix from Jiri
    Pirko.

19) Make PMTU/redirect flushing work properly again in ipv4, from
    Steffen Klassert.

20) Fix memory corruptions by using kfree_rcu() in netlink_release().
    From Eric Dumazet.

21) More qmi_wwan device IDs, from Bjørn Mork.

22) Fix unintentional change of SNAT/DNAT hooks in generic NAT
    infrastructure, from Elison Niven.

23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
  tilegx: fix some issues in the SW TSO support
  qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan
  net: usb: Fix memory leak on Tx data path
  net/mlx4_core: Unmap UAR also in the case of error flow
  net/mlx4_en: Don't use vlan tag value as an indication for vlan presence
  net/mlx4_en: Fix double-release-range in tx-rings
  bas_gigaset: fix pre_reset handling
  vhost: fix mergeable bufs on BE hosts
  gianfar_ptp: use iomem, not ioports resource tree in probe
  ipv6: Set default hoplimit as zero.
  NET_VENDOR_TI: make available for am33xx as well
  pch_gbe: fix error handling in pch_gbe_up()
  b43: Fix oops on unload when firmware not found
  mwifiex: clean up scan state on error
  mwifiex: return -EBUSY if specific scan request cannot be honored
  brcmfmac: fix potential NULL dereference
  Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"
  ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation
  rt2x00: usb: fix reset resume
  rtlwifi: pass rx setup error code to caller
  ...

Pull slave-dmaengine fixes from Vinod Koul:
 "Three fixes for slave dmanegine.

  Two are for typo omissions in sifr dmaengine driver and the last one
  is for the imx driver fixing a missing unlock"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sirf: fix a typo in moving running dma_desc to active queue
  dmaengine: sirf: fix a typo in dma_prep_interleaved
  dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()