- 18 Mar, 2010 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: PCMCIA: resource, fix lock imbalance pcmcia: add important if statement pcmcia: re-route Cardbus IRQ to ISA on ti1130 bridges if necessary pcmcia: allow for cb_irq to differ from pci_dev's irq in yenta_socket pcmcia: honor saved flags in yenta_socket's I365_CSCINT register pcmcia: revert "irq probe can be done without risking an IRQ storm" pcmcia: pd6729, i82092: use parent (PCI) resources pcmcia/vrc4171: use local spinlock for device local lock.
-
Heiko Carstens authored
Implement arch specific arch_get_memory_phys_device function and initialize phys_device for each memory section. That way we finally can tell which piece of memory belongs to which physical device. This makes s390's /sys/devices/system/memory/memoryX/phys_device display the correct thing? Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Heiko Carstens authored
/sys/devices/system/memory/memoryX/phys_device is supposed to contain the number of the physical device that the corresponding piece of memory belongs to. In case a physical device should be replaced or taken offline for whatever reason it is necessary to set all corresponding memory pieces offline. The current implementation always sets phys_device to '0' and there is no way or hook to change that. Seems like there was a plan to implement that but it wasn't finished for whatever reason. So add a weak function which architectures can override to actually set the phys_device from within add_memory_block(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Replace open-coded loop with for_each_set_bit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use bitmap_weight() instead of doing hweight32() for each u32 element in the page. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Venkatesh Pallipadi authored
jffs2 uses rb_node = NULL; to zero rb_root. The problem with this is that 17d9ddc7 ("rbtree: Add support for augmented rbtrees") in the linux-next tree adds a new field to that struct which needs to be NULL as well. This patch uses RB_ROOT as the intializer so all of the relevant fields will be NULL'd. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Eric Paris <eparis@redhat.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
swap_cgroup uses 2bytes data and uses cmpxchg in a new operation. 2byte cmpxchg/xchg is not available on some archs. This patch replaces cmpxchg/xchg with operations under lock. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reported-by: Sachin Sant <sachinp@in.ibm.com> wrote: Acked-by: Balbir Singh <balbir@in.ibm.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Mar, 2010 1 commit
-
-
Jiri Slaby authored
Stanse found that one error path (when alloc_skb fails) in netdev_tx omits to unlock hw_priv->hwlock. Fix that by moving away from unlock in each fail path. Unlock at one place instead. Introduced in 94a819f8 (pcmcia: assert locking to struct pcmcia_device) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
- 15 Mar, 2010 28 commits
-
-
Dan Carpenter authored
There was a problem introduced in Jul 2008 by: 0e6f9d27 pcmcia: use pcmcia_loop_config in scsi pcmcia drivers Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Jens Künzer authored
As the PCI irq pin of the ti1130 pcmcia bridge is not connected (at least on some old IBM Thinkpad 760ED notebooks), the Cardbus IRQ has to be routed to an ISA irq. Part 3 of a series to allow the ISA irq to be used for Cardbus devices if the socket's PCI irq is unusable. [linux@dominikbrodowski.net: split up the original patch, commit message, cleanup] Signed-off-by: Jens Kuenzer <Jens.Kuenzer@fpga.homeip.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Jens Künzer authored
cb_irq is presumed to be the same as the pci_dev's irq. This won't be true any more as soon as we allow the ISA irq to be used for Cardbus devices. Therefore, use the pci_dev's irq explicitely whenever we care about it. Part 2 of a series to allow the ISA irq to be used for Cardbus devices if the socket's PCI irq is unusable. [linux@dominikbrodowski.net: split up the original patch, commit message] Signed-off-by: Jens Kuenzer <Jens.Kuenzer@fpga.homeip.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Jens Künzer authored
Instead of overwriting the I365_CSCINT register, save the old value and merely change the bits we care about. Part 1 of a series to allow the ISA irq to be used for Cardbus devices if the socket's PCI irq is unusable. [linux@dominikbrodowski.net: split up the original patch, commit message] Signed-off-by: Jens Kuenzer <Jens.Kuenzer@fpga.homeip.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
This reverts commit 635416ef. The argument passed to request_irq() only affects action->flags (IRQF_*), but IRQ_NOAUTOEN relates to desc->status. Reported-by: Jan Beulich <JBeulich@novell.com> CC: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
A newly added parent resource entry for the root PCI bus, such as 40000000-ffffffff : PCI Bus #00 means that the pd6729 and i82092 drivers cannot allocate iomem as freely as before, unless they do so as PCI devices. Therefore, set socket->cb_dev so that rsrc_nonstatic.c does the right thing. Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Yoichi Yuasa authored
struct pcmcia_socket lock had been used before. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI: processor: push file static MADT pointer into internal map_madt_entry() ACPI: processor: refactor internal map_lsapic_id() ACPI: processor: refactor internal map_x2apic_id() ACPI: processor: refactor internal map_lapic_id() ACPI: processor: driver doesn't need to evaluate _PDC ACPI: processor: remove early _PDC optin quirks ACPI: processor: add internal processor_physically_present() ACPI: processor: move acpi_get_cpuid into processor_core.c ACPI: processor: export acpi_get_cpuid() ACPI: processor: mv processor_pdc.c processor_core.c ACPI: processor: mv processor_core.c processor_driver.c ACPI: plan to delete "acpi=ht" boot option ACPI: remove "acpi=ht" DMI blacklist PNPACPI: add bus number support PNPACPI: add window support resource: add window support resource: add bus number support resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type acpiphp: Execute ACPI _REG method for hotadded devices ACPI video: Be more liberal in validating _BQC behaviour ...
-
Wolfram Sang authored
Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute.") introduced this requirement. First, at25 was fixed manually. Then, other occurences were found with coccinelle and the following semantic patch. Results were reviewed and fixed up: @ init @ identifier struct_name, bin; @@ struct struct_name { ... struct bin_attribute bin; ... }; @ main extends init @ expression E; statement S; identifier name, err; @@ ( struct struct_name *name; | - struct struct_name *name = NULL; + struct struct_name *name; ) ... ( sysfs_bin_attr_init(&name->bin); | + sysfs_bin_attr_init(&name->bin); if (sysfs_create_bin_file(E, &name->bin)) S | + sysfs_bin_attr_init(&name->bin); err = sysfs_create_bin_file(E, &name->bin); ) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Len Brown authored
Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
-
Alex Chiang authored
There's no real need for a pointer to the MADT to be global. The only function who uses it is map_madt_entry. This allows us to remove some more ugly #ifdefs. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Un-nest the if statements for readability. Remove comments that re-state the obvious. Change the control flow so that we no longer need a temp variable. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Untangle the nested if conditions to make this function look more similar to the other map_*apic_id() functions. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Untangle the if() statement a little for readability. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Now that the early _PDC evaluation path knows how to correctly evaluate _PDC on only physically present processors, there's no need for the processor driver to evaluate it later when it loads. To cover the hotplug case, push _PDC evaluation down into the hotplug paths. Cc: x86@kernel.org Cc: Tony Luck <tony.luck@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Now that we check for physically present processors before blindly evaluating _PDC, we no longer need to maintain a DMI opt-in table nor a kernel param. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Detect if a processor is physically present before evaluating _PDC. We want this because some BIOS will provide a _PDC even for processors that are not present. These bogus _PDC methods then attempt to load non-existent tables, which causes problems. Avoid those bogus landmines. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Enumerating processors (via MADT/_MAT) belongs in the processor core, which is always built-in, rather than living in the processor driver which may not be built. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
Rename static get_cpu_id() to acpi_get_cpuid() and export it. This change also gives us an opportunity to remove the #ifndef CONFIG_SMP from processor_driver.c and into a header file where it properly belongs. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
We've renamed the old processor_core.c to processor_driver.c, to convey the idea that it can be built modular and has driver-like bits. Now let's re-create a processor_core.c for the bits needed statically by the rest of the kernel. The contents of processor_pdc.c are a good starting spot, so let's just rename that file and complete our three card monte. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alex Chiang authored
The ACPI processor driver can be built as a module. But it has pieces of code that should always be built statically into the kernel. The plan is for processor_core.c to contain the static bits while processor_driver.c contains the module-like bits. Since the bulk of the code in the current processor_core.c is module-like, first step is to rename the file to processor_driver.c Next step will re-create processor_core.c and cherry-pick out the static bits. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Len Brown authored
Signed-off-by: Len Brown <len.brown@intel.com>
-
Len Brown authored
SuSE added these entries when deploying ACPI in Linux-2.4. I pulled them into Linux-2.6 on 2003-08-09. Over the last 6+ years, several entries have proven to be unnecessary and deleted, while no new entries have been added. Matthew suggests that they now have negative value, and I agree. Based-on-patch-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Len Brown <len.brown@intel.com>
-
Bjorn Helgaas authored
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Previously, PNP ignored bus number resources. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Bjorn Helgaas authored
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. This does not add support for *setting* windows via the /proc interface. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Bjorn Helgaas authored
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Bjorn Helgaas authored
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Bjorn Helgaas authored
No functional change; this just makes room for another resource type. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
- 14 Mar, 2010 4 commits
-
-
Dan Carpenter authored
The original code returns a freed pointer. This function is expected to return NULL on errors. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
-
Shaohua Li authored
Per ACPI spec, _ERG method should be executed before device driver gets control for hotpluged device. Firmware might do some configuration there. See http://bugzilla.kernel.org/show_bug.cgi?id=10805. In this machine, _REG method of docked device will configure cardbus bridge. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Tested-by: Paul Martin <pm@debian.org> Signed-off-by: Len Brown <len.brown@intel.com>
-
Matthew Garrett authored
Right now, if _BQC returns a value we don't understand we immediately invalidate it. Change this behaviour so we only invalidate it if it continues to give an invalid answer after we've already set a brightness. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/mce: Fix build bug with CONFIG_PROVE_LOCKING=y && CONFIG_X86_MCE_INTEL=y
-