- 04 Feb, 2010 28 commits
-
-
John Fastabend authored
Processing multiple ixgbe_watchdog_task calls may cause the link_up variable and IXGBE_FLAG_NEED_LINK_UPDATE flag to be set incorrectly. In the worse case this is causing the netif_carrier_off to be called inappropriately which results in an interface that can't be brought up. Although schedule_work() will only schedule the task if it is not already on the work queue the WORK_STRUCT_PENDING bits are cleared just before calling the work function. This allows WORK_STRUCT_PENDING to be cleared, the work function to start and meanwhile schedule another task. This patch adds a mutex to the watchdog task. This bug is actualized by changing DCB settings or doing extended cable pull or reset tests. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Krishna Kumar authored
a developer had complained of getting lots of warnings: "eth16 selects TX queue 98, but real number of TX queues is 64" http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html As there was no follow up on that bug, I am submitting this patch assuming that the other return points will not return invalid txq's, and also that this fixes the bug (not tested). Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
Anton Blanchard authored
Commit e5a43549 (ixgbe: remove skb_dma_map/unmap calls from driver) looks to have introduced a bug in ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards through count until it becomes -1 and return that. The caller of ixgbe_tx_map expects 0 on error, so return that instead. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Amit Kumar Salecha authored
o context resources can be in used, while resource cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump. Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Amit Kumar Salecha authored
For NX2031, first try to scrub interrupt before requesting firmware reset. Return statement was missing after scrubbbing interrupt. Signed-off-by:
Vernon Mauery <vernux@us.ibm.com> Signed-off-by:
-
Ben Hutchings authored
Earlier refactoring has made these inclusions unnecessary. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
In particular, the comment about EVQ_RPTR_REG is based on inconsistent preliminary hardware documentation, though the following code was fixed long before release. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Steve Hodgson authored
Signed-off-by:
-
Guido Barzini authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
SFC9000-family boards do not all use MDIO PHYs, so we need a different test for PHY aliveness. Introduce a PHY operation test_alive(). For PHYs attached to Falcon, use a common implementation based on the existing PHY MDIO test. For PHYs managed through MCDI, use the appropriate MCDI request. Change test name in ethtool from 'core mdio' to 'phy alive'. Rename test_results::mdio to phy_alive and test_results::phy to phy_ext. Signed-off-by:
-
Steve Hodgson authored
Signed-off-by:
-
Steve Hodgson authored
This allows the driver to recover if the MC firmware has crashed due to an assertion failure. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Gerrit Renker authored
This fixes commit (38ff3e6b) ("dccp_probe: Fix module load dependencies between dccp and dccp_probe", from 15 Jan). It fixes the construction of the first argument of try_then_request_module(), where only valid return codes from the first argument should be returned. What we do now is assign the result of register_jprobe() to ret, without the side effect of the comparison. Acked-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Gerrit Renker authored
This fixes a bug introduced in commit de4ef86c ("dccp: fix dccp rmmod when kernel configured to use slub", 17 Jan): the vsnprintf used sizeof(slab_name_fmt), which became truncated to 4 bytes, since slab_name_fmt is now a 4-byte pointer and no longer a 32-character array. This lead to error messages such as FATAL: Error inserting dccp: No buffer space available >> kernel: [ 1456.341501] kmem_cache_create: duplicate cache cci generated due to the truncation after the 3rd character. Fixed for the moment by introducing a symbolic constant. Tested to fix the bug. Signed-off-by:
-
Joe Perches authored
String constants that are continued on subsequent lines with \ are not good. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Pavel Cheblakov authored
This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) Changes since v1: - Added some defines for static inline int plx_pci_check_sja1000(...) - static struct pci_device_id plx_pci_tbl[] replaced by static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) - Typo fixed Signed-off-by:
Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Divy Le Ray authored
Add memory barriers to fix crashes observed on newest PowerPC platforms. The HW and driver state of the receive rings were getting out of sync. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
stephen hemminger authored
The book keeping structure for transmit always had the flags value cleared so transmit DMA maps were never released correctly. Based on patch by Jarek Poplawski, problem observed by Michael Breuer. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Andreas Mohr authored
ChangeLog: Implement .reset_resume support to retain a live network connection during suspend despite USB power loss. - rework operation to reference cached data in mcs7830_data and netdev->dev_addr - update netdev->dev_addr only in case new MAC was set successfully . Tests done: . ethtool -d pre-/post-suspend: register values match . running ssh session suspend, resume: works . ifdown device, suspend, resume: works . ifup, suspend, unplug, resume: WORKS (eth1 is removed, re-ifup of eth1 after card replug works) . verified identical MAC in ifconfig post-resume (ok, should be verified on network side to be fully certain...) Keywords: suspend resume network connection dead interface down Signed-off-by:Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Andreas Mohr authored
ChangeLog: - rename register, add comment Signed-off-by:
-
Andreas Mohr authored
ChangeLog: - spelling corrections / whitespace Signed-off-by:
-
Andreas Mohr authored
ChangeLog: - evaluate Rx error statistics from trailing Rx status byte - add driver TODO list - add myself to authors Quilt series run-tested, based on 2.6.33-rc4 (net-2.6.git mcs7830 has idle history, should be good to go). Signed-off-by:
-
Alexey Dobriyan authored
Netlink code does module autoload if protocol userspace is asking for is not ready. However, module can dissapear right after it was autoloaded. Example: modprobe/rmmod stress-testing and xfrm_user.ko providing NETLINK_XFRM. netlink_create() in such situation _will_ create userspace socket and _will_not_ pin module. Now if module was removed and we're going to call ->netlink_rcv into nothing: BUG: unable to handle kernel paging request at ffffffffa02f842a ^^^^^^^^^^^^^^^^ modules are loaded near these addresses here IP: [<ffffffffa02f842a>] 0xffffffffa02f842a PGD 161f067 PUD 1623063 PMD baa12067 PTE 0 Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent CPU 1 Pid: 11515, comm: ip Not tainted 2.6.33-rc5-netns-00594-gaaa5728-dirty #6 P5E/P5E RIP: 0010:[<ffffffffa02f842a>] [<ffffffffa02f842a>] 0xffffffffa02f842a RSP: 0018:ffff8800baa3db48 EFLAGS: 00010292 RAX: ffff8800baa3dfd8 RBX: ffff8800be353640 RCX: 0000000000000000 RDX: ffffffff81959380 RSI: ffff8800bab7f130 RDI: 0000000000000001 RBP: ffff8800baa3db58 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000011 R13: ffff8800be353640 R14: ffff8800bcdec240 R15: ffff8800bd488010 FS: 00007f93749656f0(0000) GS:ffff880002300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa02f842a CR3: 00000000ba82b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 11515, threadinfo ffff8800baa3c000, task ffff8800bab7eb30) Stack: ffffffff813637c0 ffff8800bd488000 ffff8800baa3dba8 ffffffff8136397d <0> 0000000000000000 ffffffff81344adc 7fffffffffffffff 0000000000000000 <0> ffff8800baa3ded8 ffff8800be353640 ffff8800bcdec240 0000000000000000 Call Trace: [<ffffffff813637c0>] ? netlink_unicast+0x100/0x2d0 [<ffffffff8136397d>] netlink_unicast+0x2bd/0x2d0 netlink_unicast_kernel: nlk->netlink_rcv(skb); [<ffffffff81344adc>] ? memcpy_fromiovec+0x6c/0x90 [<ffffffff81364263>] netlink_sendmsg+0x1d3/0x2d0 [<ffffffff8133975b>] sock_sendmsg+0xbb/0xf0 [<ffffffff8106cdeb>] ? __lock_acquire+0x27b/0xa60 [<ffffffff810a18c3>] ? might_fault+0x73/0xd0 [<ffffffff810a18c3>] ? might_fault+0x73/0xd0 [<ffffffff8106db22>] ? __lock_release+0x82/0x170 [<ffffffff810a190e>] ? might_fault+0xbe/0xd0 [<ffffffff810a18c3>] ? might_fault+0x73/0xd0 [<ffffffff81344c77>] ? verify_iovec+0x47/0xd0 [<ffffffff8133a509>] sys_sendmsg+0x1a9/0x360 [<ffffffff813c2be5>] ? _raw_spin_unlock_irqrestore+0x65/0x70 [<ffffffff8106aced>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff813c2bc2>] ? _raw_spin_unlock_irqrestore+0x42/0x70 [<ffffffff81197004>] ? __up_read+0x84/0xb0 [<ffffffff8106ac95>] ? trace_hardirqs_on_caller+0x145/0x190 [<ffffffff813c207f>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100262b>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<ffffffffa02f842a>] 0xffffffffa02f842a RSP <ffff8800baa3db48> CR2: ffffffffa02f842a If module was quickly removed after autoloading, return -E. Return -EPROTONOSUPPORT if module was quickly removed after autoloading. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
1. After sock_register() returns, it's possible to create sockets, even if module still not initialized fully (blame generic module code for that!) 2. Consequently, pfkey_create() can be called with pfkey_net_id still not initialized which will BUG_ON in net_generic(): kernel BUG at include/net/netns/generic.h:43! 3. During netns shutdown, netns ops should be unregistered after key manager unregistered because key manager calls can be triggered from xfrm_user module: general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC pfkey_broadcast+0x111/0x210 [af_key] pfkey_send_notify+0x16a/0x300 [af_key] km_state_notify+0x41/0x70 xfrm_flush_sa+0x75/0x90 [xfrm_user] 4. Unregister netns ops after socket ops just in case and for symmetry. Reported by Luca Tettamanti. Signed-off-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
- 02 Feb, 2010 12 commits
-
-
Evgeniy Polyakov authored
On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote: > > There are at least two ways to fix it: using a big cannon and a small > > one. The former way is to disable notification registration, since it is > > not used by anyone at all. Second way is to check whether calling > > process is root and its destination group is -1 (kind of priveledged > > one) before command is dispatched to workqueue. > > Well if no one is using it, removing it makes the most sense, right? > > No objection from me, care to make up a patch either way for this? Getting it is not used, let's drop support for notifications about (un)registered events from connector. Another option was to check credentials on receiving, but we can always restore it without bugs if needed, but genetlink has a wider code base and none complained, that userspace can not get notification when some other clients were (un)registered. Kudos for Sebastian Krahmer <krahmer@suse.de>, who found a bug in the code. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Amit Kumar Salecha authored
Loopback test (offline) added in ethtool self test. o Set device in loopback mode o Send packets o Process receive packets in qlcnic_process_rcv_ring_diag() o Compare packets o Reset device in normal mode. Signed-off-by:
-
Amit Kumar Salecha authored
Interrupt test (offline) added in ethtool self test. Register a temporary interrupt handler and then send command to fw to raise an interrupt. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Sucheta Chakraborty authored
Added support of device identification by blinking LED for specified time. Signed-off-by:
-
Amit Kumar Salecha authored
o context resources can be in used, while resoruce cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump and FW health registers should be dump in any case. Signed-off-by:
-
Amit Kumar Salecha authored
o After firmware recovery, clear device reset state transition register. Otherwise firmware reload can occur unnecessary. Signed-off-by:
-
Amit Kumar Salecha authored
Added missing identifier that distinguishes between FCOE/ISCSI/ETHERNET functions. Signed-off-by:
Rajesh K Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
-
Amit Kumar Salecha authored
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by:
-
Jarek Poplawski authored
Btw of the dma-debug problem reported by Michael Breuer I spotted a tiny misspelling in TX_MAP_PAGE definition introduced by commit 6b84daca. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Shirley Ma authored
virtio_net receives packets from its pre-allocated vring buffers, then it delivers these packets to upper layer protocols as skb buffs. So it's not necessary to pre-allocate skb for each mergable buffer, then frees extra skbs when buffers are merged into a large packet. This patch has deferred skb allocation in receiving packets for both big packets and mergeable buffers to reduce skb pre-allocations and skb frees. It frees unused buffers by calling detach_unused_buf in vring, so recv skb queue is not needed. Signed-off-by:
Shirley Ma <xma@us.ibm.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Shirley Ma authored
There's currently no way for a virtio driver to ask for unused buffers, so it has to keep a list itself to reclaim them at shutdown. This is redundant, since virtio_ring stores that information. So add a new hook to do this. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Use atomic_inc_return() in get_acqseq() to avoid taking a spinlock Signed-off-by:
-
