SLUB is now the only remaining allocator after the SLAB removal and it
was the default already before that, so no need to mention it in the
defconfig files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

CONFIG_NET_ETHERNET was removed a long time ago in f860b052 ("drivers/net:
Kconfig and Makefile cleanup"). Remove the last references to in in ARM
defconfig files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

These were removed last year in commit 721da5ce ("driver core:
remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2"),
so remove the last references to them in arm config files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

As part of general housekeeping, change the defconfig files to
sort lines based on the 'make savedefconfig' output, to make
it easier to do additional changes on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A number of options got reorganized over time wihtin Kconfig, so make sure
everything is where it belongs in order to simplify defconfig changes
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The STM32 systems have a mailbox used for communication with non-Linux
processors like the M4 on the STM32MP157A.  Enable the driver for the
mailbox so it is available for testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107-arm-defconfig-stm32-ipcc-v1-1-924721db5661@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig

A few more Qualcomm Arm64 defconfig updates for v6.8

This enables the base drivers necessary to boot devices on the X1E
platform.
The GPU clock controller for SM8450/SM8550 is enabled and the SC8280XP
camera clock controller is enabled, to enable respective functionality
on these platforms.

* tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Enable Qualcomm SC8280XP camera clock controller
  arm64: defconfig: enable GPU clock controller for SM8[45]50
  arm64: defconfig: Enable X1E80100 SoC base configs

Link: https://lore.kernel.org/r/20231231034648.3262882-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

With the camera clock controller added to the DeviceTree of SC8280XP the
interconnect providers no longer reaches sync_state, resulting in a
noticeable reduction in battery life.

Enable the camera clock controller (as a module) to avoid this, and
hopefully soon provide some level of camera support.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231221-enable-sc8280xp-camcc-v1-1-2249581dd538@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

These allow user-space programs to create RPMSG endpoints and have
those endpoints show up as device files. They are enabled in the
ARM64 defconfig and are useful for the same reasons here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enables support of STM32 DCMIPP V4L2 media driver.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20231215100656.729094-1-alexandre.torgue@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig

Qualcomm ARM64 defconfig updates for v6.8

Core platform-specific drivers for SM8650, SM4450, and SDX75 are
enabled. The sound drivers for SC8280XP and SM8650 are enabled.
Lastly the UEFI Secure App driver, providing EFI variable access on some
platforms is enabled.

* tag 'qcom-arm64-defconfig-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: enable Qualcomm WSA884x driver
  arm64: defconfig: enable Qualcomm UEFI Secure App driver
  arm64: defconfig: enable Qualcomm sc8280xp sound drivers
  arm64: defconfig: enable clock controller and pinctrl
  arm64: deconfig: enable Qualcomm SM8650 SoC drivers
  arm64: defconfig: Enable GCC, pinctrl and interconnect for SDX75
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-config-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig

TI K3 defconfig updates for v6.8

- Enable TI K3 SoC components PRUSS, CSI2RX, POWERVR for various boards.
- Enable TC358767 for Iot2050 board
- Increase 8250_NR_UARTS from 4 to 8 to support AM62x verdin boards (minor increase in kernel image)

* tag 'ti-k3-config-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: defconfig: Enable DRM_POWERVR
  arm64: defconfig: Enable J721E CSI2RX
  arm64: defconfig: Increase SERIAL_8250_NR_UARTS
  arm64: defconfig: Enable TI_ICSSG_PRUETH
  arm64: defconfig: Enable Toshiba TC358767 bridge

Link: https://lore.kernel.org/r/20231218153102.ptduqsvtsq7sxs5n@tinselSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mtk-defconfig-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig

MediaTek ARM64 defconfig updates for v6.8

Those defconfig changes enable booting the MT8173 Chromebooks with the
enablement of the DA9211 regulator driver and adds modules for sound,
AudioDSP, DisplayPort and LVTS Thermal for MT8192/MT8195, and module
for the ChromeOS Keyboard LED backlight which is present on various
Google Chromebooks.

* tag 'mtk-defconfig-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
  arm64: defconfig: Enable configs for MT8195-Cherry-Tomato Chromebook
  arm64: defconfig: Enable DA9211 regulator

Link: https://lore.kernel.org/r/20231212114515.121695-3-angelogioacchino.delregno@collabora.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.8/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/defconfig

Defconfig changes for omaps

Defconfig changes to enable I2C devices for bt200 as loadable modules
for the PMIC, sensors and LEDs.

* tag 'omap-for-v6.8/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: enable I2C devcies of bt200

Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable GPU Clock Controller for SM8450 and SM8550 to allow using
Adreno GPU on these SoCs.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-sm8x50-upstream-gpucc-defconfig-v2-1-e5892470a10b@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable GCC, Pinctrl and Interconnect configs for Qualcomm's X1E80100 SoC
which is required to boot X1E80100 QCP/CRD boards to a console shell. The
configs are required to be marked as builtin and not modules due to the
console driver dependencies.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-6-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the Qualcomm WSA884x driver, used speakers on boards with
Qualcomm SM8550 like QRD8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106073048.24553-1-krzysztof.kozlowski@linaro.org
[bjorn: Rebased on Johan's patch adding SC8280XP and WSA883x, rewrote commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the Qualcomm QSEECOM interface driver and the UEFI Secure
Application client driver which are needed to access EFI variables on
machines like the Lenovo ThinkPad X13s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-3-johan+linaro@kernel.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the Qualcomm sc8280xp machine driver and the wsa833x speaker
codec driver that are needed for sound on machines like the Lenovo
ThinkPad X13s.

Note that the wcd938x headphone codec driver is currently implicitly
enabled as it is selected by the sc7280 machine driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-2-johan+linaro@kernel.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable global clock controller and pinctrl for support the Qualcomm
SM4450 platform to boot to UART console.

The serial engine depends on some global clock controller and pinctrl, but
as the serial console driver is only available as built-in, so the global
clock controller and pinctrl also needs be built-in for the UART device to
probe and register the console.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-7-quic_tengfan@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the PowerVR DRM driver, as it's used for the GPU in platforms
using the TI AM62x SoCs, such as the TI SK-AM62 and BeaglePlay (2023).
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Acked-by: Darren Etheridge <detheridge@ti.com>
Link: https://lore.kernel.org/r/2f6af3ebfe9e36c80c03de2dcc2e940dd5dc2c4b.1701773390.git.donald.robson@imgtec.comSigned-off-by: Nishanth Menon <nm@ti.com>

Enable missing configs needed to boot the MT8195-Cherry-Tomato
Chromebook with full support on the defconfig.

The configs enabled bring in support for the DSP and sound card,
display, thermal sensor and keyboard backlight.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231122181335.535498-1-nfraprado@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Mediatek mt8173 board fails to boot with DA9211 regulator disabled.
Enabling CONFIG_REGULATOR_DA9211=y in drm-ci fixes the issue.

So enable it in the defconfig since kernel-ci also requires it.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230911104139.617448-1-vignesh.raman@collabora.comSigned-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Enable Clocks, Pinctrl and Interconnect drivers in the ARM64
defconfig for the Qualcomm SM8650 SoC to boot the SM8650 MTP
(Mobile Test Platform) and QRD (Qualcomm Reference Device) boards.

TCSRCC, GCC, Interconnect, and Pinctrl config are marked as builtin and
not modules due to boot dependencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231121-topic-sm8650-upstream-defconfig-v1-1-2500565fc21b@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable Global Clock controller, pinctrl and interconnect framework
support for Qualcomm's SDX75 SoC which is required to boot to
console on sdx75-idp platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117055849.534671-1-quic_rohiagar@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Merge tag 'renesas-arm-defconfig-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig

Renesas ARM defconfig updates for v6.8

  - Enable support for the Renesas VersaClock 3 clock generator in the
    arm64 defconfig,
  - Enable support for the Renesas EtherAVB module in the arm multi_v7
    defconfig,
  - Refresh shmobile_defconfig for v6.7-rc1.

* tag 'renesas-arm-defconfig-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: defconfig: Refresh for v6.7-rc1
  ARM: multi_v7_defconfig: Enable CONFIG_RAVB
  arm64: defconfig: Enable Renesas VersaClock 3 clock generator config

Link: https://lore.kernel.org/r/cover.1701433487.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

SCMI reset controllers are used in the ARMv7 STMicroelectronics stm32mp
boards:
- for STM32MP13: stm32mp135f-dk
- for STM32MP15 boards with SCMI variant, introduced by commit 5b7e5831
  ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
  * stm32mp157c-ev1-scmi
  * stm32mp157c-ed1-scmi
  * stm32mp157c-dk2-scmi
  * stm32mp157a-dk1-scmi

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Link: https://lore.kernel.org/r/20231103085400.2924282-1-etienne.carriere@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AM62 and other K3 based SoCs use Cadence DPHY and CSI-RX bridge
drivers, along with a DMA wrapper CSI IP for the camera pipeline.

Enable the same to get camera functionality on AM62x-SK, BeaglePlay and
AM62Ax SK among other platforms.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231201-csi_dts-v3-1-9f06f31080fe@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Increase CONFIG_SERIAL_8250_NR_UARTS from 4 to 8, the current legacy value
is not adequate for embedded systems that use SoCs where it's common to
have a large number of serial ports.

No need to change CONFIG_SERIAL_8250_RUNTIME_UARTS, see commit 9d86719f
("serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS").

The need to increase this value was noticed while working with Toradex
Verdin AM62, this board has 4 serial UART instances available to the user
plus an internal one that is connected to a Bluetooth module. Without this
change the fifth UART connected to the BT module is not instantiated and BT
is not working.

Instead of increasing the number to the bare minimum (5) that would be
required to solve this specific issue, we increase this to 8 which seems a
more reasonable number to have in the defconfig and should cover more valid
use cases.

With this change the kernel image size increases by ~3.2kB. bloat-o-meter
summary: add/remove: 1/1 grow/shrink: 7/0 up/down: 3220/-8 (3212)

Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20231201195732.4931-1-francesco@dolcini.itSigned-off-by: Nishanth Menon <nm@ti.com>

The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.

Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231128084537.3946895-1-danishanwar@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Siemens' SIMATIC IOT2050 platform[0], based on Texas Instruments'
AM65x SoC[1], uses Toshiba TC358767[2] to convert DPI video to
DisplayPort (DP) video output. The original DPI signals are generated
by AM65x's Display SubSystem (DSS).

Toshiba TC358767 is also capable of other video format conversions, viz,
DPI to (e)DP, DSI to (e)DP, and DSI to DPI.

Enable the video bridge Toshiba TC358767.

[0]: https://www.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
[1]: https://www.ti.com/product/AM6548
[2]: https://toshiba.semicon-storage.com/info/datasheet_en_20230731.pdf?did=36657Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231030152834.18450-1-a-bhatia1@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Enable all available I2C drivers needed for the Epson Moverio BT200,
that are:
- LED
- Subdevs of the TWL6032 PMIC
- IMU sensors
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231120215635.4187399-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Refresh the defconfig for Renesas ARM systems:
  - Disable CONFIG_SERIAL_8250_EXAR (auto-enabled since commit
    5939ff7f ("tty: serial: 8250_exar: Does not use anything
    from 8250_pci")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b9bdb0fe3635a7eb51a7eca9a06e8146d6ad82db.1700667824.git.geert+renesas@glider.be

The Renesas Ethernet AVB driver is used by various iWave RZ/G1
development boards.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120070024.4079344-15-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable the config for the Renesas VersaClock 3 programmable clock
generator, as it is populated on RZ/{G2L,G2LC} and RZ/V2L SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230824083006.88944-1-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Pull tracing fixes from Steven Rostedt::
 "Eventfs fixes:

   - With the usage of simple_recursive_remove() recommended by Al Viro,
     the code should not be calling "d_invalidate()" itself. Doing so is
     causing crashes. The code was calling d_invalidate() on the race of
     trying to look up a file while the parent was being deleted. This
     was detected, and the added dentry was having d_invalidate() called
     on it, but the deletion of the directory was also calling
     d_invalidate() on that same dentry.

   - A fix to not free the eventfs_inode (ei) until the last dput() was
     called on its ei->dentry made the ei->dentry exist even after it
     was marked for free by setting the ei->is_freed. But code elsewhere
     still was checking if ei->dentry was NULL if ei->is_freed is set
     and would trigger WARN_ON if that was the case. That's no longer
     true and there should not be any warnings when it is true.

   - Use GFP_NOFS for allocations done under eventfs_mutex. The
     eventfs_mutex can be taken on file system reclaim, make sure that
     allocations done under that mutex do not trigger file system
     reclaim.

   - Clean up code by moving the taking of inode_lock out of the helper
     functions and into where they are needed, and not use the parameter
     to know to take it or not. It must always be held but some callers
     of the helper function have it taken when they were called.

   - Warn if the inode_lock is not held in the helper functions.

   - Warn if eventfs_start_creating() is called without a parent. As
     eventfs is underneath tracefs, all files created will have a parent
     (the top one will have a tracefs parent).

  Tracing update:

   - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"

* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
  eventfs: Make sure that parent->d_inode is locked in creating files/dirs
  eventfs: Do not allow NULL parent to eventfs_start_creating()
  eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
  eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
  eventfs: Do not invalidate dentry in create_file/dir_dentry()
  eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL

Pull parisc architecture fixes from Helge Deller:
 "This patchset fixes and enforces correct section alignments for the
  ex_table, altinstructions, parisc_unwind, jump_table and bug_table
  which are created by inline assembly.

  Due to not being correctly aligned at link & load time they can
  trigger unnecessarily the kernel unaligned exception handler at
  runtime. While at it, I switched the bug table to use relative
  addresses which reduces the size of the table by half on 64-bit.

  We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
  from HP-UX, which now trigger build-issues with glibc. We can simply
  remove them.

  Most of the patches are tagged for stable kernel series.

  Summary:

   - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
     build issues

   - Fix section alignments for ex_table, altinstructions, parisc unwind
     table, jump_table and bug_table

   - Reduce size of bug_table on 64-bit kernel by using relative
     pointers"

* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Reduce size of the bug_table on 64-bit kernel by half
  parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
  parisc: Use natural CPU alignment for bug_table
  parisc: Ensure 32-bit alignment on parisc unwind section
  parisc: Mark lock_aligned variables 16-byte aligned on SMP
  parisc: Mark jump_table naturally aligned
  parisc: Mark altinstructions read-only and 32-bit aligned
  parisc: Mark ex_table entries 32-bit aligned in uaccess.h
  parisc: Mark ex_table entries 32-bit aligned in assembly.h

Pull x86 microcode fixes from Ingo Molnar:
 "Fix/enhance x86 microcode version reporting: fix the bootup log spam,
  and remove the driver version announcement to avoid version confusion
  when distros backport fixes"

* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Rework early revisions reporting
  x86/microcode: Remove the driver announcement and version

Pull x86 perf event fix from Ingo Molnar:
 "Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
  code resulting in non-working events on those platforms"

* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities