- 29 Mar, 2016 1 commit
-
-
Laurent Pinchart authored
Instead of forcing bridges to implement empty callbacks make them all optional. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456480266-7904-1-git-send-email-laurent.pinchart+renesas@ideasonboard.comAcked-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
- 21 Mar, 2016 2 commits
-
-
Christian König authored
A fence is never later than itself. This caused a bunch of overhead for AMDGPU. v2: simplify check as suggested by Michel. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Just a bit of wording polish plus mentioning that it can fail and must be restarted. Requested by Sumit. v2: Fix them typos (Hans). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Cc: Hans Verkuil <hverkuil@xs4all.nl> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
- 20 Mar, 2016 1 commit
-
-
Luis de Bethencourt authored
Description of expected_size doesn't match any parameter of the function drm_atomic_replace_property_blob. Removing it. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
- 19 Mar, 2016 1 commit
-
-
Chris Wilson authored
Drivers, especially i915.ko, can fail during the initial migration of a dma-buf for CPU access. However, the error code from the driver was not being propagated back to ioctl and so userspace was blissfully ignorant of the failure. Rendering corruption ensues. Whilst fixing the ioctl to return the error code from dma_buf_start_cpu_access(), also do the same for dma_buf_end_cpu_access(). For most drivers, dma_buf_end_cpu_access() cannot fail. i915.ko however, as most drivers would, wants to avoid being uninterruptible (as would be required to guarrantee no failure when flushing the buffer to the device). As userspace already has to handle errors from the SYNC_IOCTL, take advantage of this to be able to restart the syscall across signals. This fixes a coherency issue for i915.ko as well as reducing the uninterruptible hold upon its BKL, the struct_mutex. Fixes commit c11e391d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Feb 11 20:04:51 2016 -0200 dma-buf: Add ioctls to allow userspace to flush Testcase: igt/gem_concurrent_blit/*dmabuf*interruptible Testcase: igt/prime_mmap_coherency/ioctl-errors Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Signed-off-by:
-
- 15 Mar, 2016 2 commits
-
-
Andrzej Hajda authored
DRM core provide helper to access crtc state. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Andrzej Hajda authored
DRM core provide helper to access crtc state. Signed-off-by:
-
- 13 Mar, 2016 2 commits
-
-
Lionel Landwerlin authored
562c5b4d didn't quite fix the issue of dealing with an error pointer. We can't free/unref an error pointer so reset it to NULL. Many thanks to Dan Carpenter for pointing this out again. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Fixes: 562c5b4d ("drm: fix blob pointer check") Signed-off-by:
-
Ville Syrjälä authored
SADs may span multiple CEA audio data blocks in the EDID. CEA-861-E says: "The order of the Data Blocks is not constrained. It is also possible to have more than one of a specific type of data block if necessary to include all of the descriptors needed to describe the sink’s capabilities." Each audio data block can carry up to 10 SADs, whereas the ELD SAD limit is 15 according to HDA 1.0a spec. So we should support at least two data blocks. And apparently some devices take a more liberal interpretation and stuff only one SAD per data block even when they would fit into one. So let's try to extract all the SADs we can fit into the ELD even when they span multiple data blocks. While at it, toss in a comment to explain the 13 byte monitor name string limit which confused me at first. Cc: Arturo Pérez <artur999555@gmail.com> Tested-by:
Arturo Pérez <artur999555@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94197Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 10 Mar, 2016 1 commit
-
-
Lionel Landwerlin authored
Check properly that the allocated blob's pointer is valid. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Daniel Stone <daniels@collabora.com> Fixes: 5488dc16 ("drm: introduce pipe color correction properties") Signed-off-by:
-
- 08 Mar, 2016 6 commits
-
-
Lionel Landwerlin authored
Patch based on a previous series by Shashank Sharma. This introduces optional properties to enable color correction at the pipe level. It relies on 3 transformations applied to every pixels displayed. First a lookup into a degamma table, then a multiplication of the rgb components by a 3x3 matrix and finally another lookup into a gamma table. The following properties can be added to a pipe : - DEGAMMA_LUT : blob containing degamma LUT - DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT - CTM : transformation matrix applied after the degamma LUT - GAMMA_LUT : blob containing gamma LUT - GAMMA_LUT_SIZE : number of elements in GAMMA_LUT DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by the driver to tell userspace applications what sizes should be the lookup tables in DEGAMMA_LUT and GAMMA_LUT. A helper is also provided so legacy gamma correction is redirected through these new properties. v2: Register LUT size properties as range v3: Fix round in drm_color_lut_get_value() helper More docs on how degamma/gamma properties are used v4: Update contributors v5: Rename CTM_MATRIX property to CTM (Doh!) Add legacy gamma_set atomic helper Describe CTM/LUT acronyms in the kernel doc v6: Fix missing blob unref in drm_atomic_helper_crtc_reset Signed-off-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Kumar, Kiran S <kiran.s.kumar@intel.com> Signed-off-by:
Kausal Malladi <kausalmalladi@gmail.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
Rob Bradford <robert.bradford@intel.com> [danvet: CrOS maintainers are also happy with the userspacde side: https://codereview.chromium.org/1182063002/ ] Reviewed-by:
-
Maarten Lankhorst authored
connector_state->crtc can no longer be unset by accident, so that check can be removed. The other code open-codes drm_atomic_get_existing_crtc_state, so use that. Signed-off-by:
-
Maarten Lankhorst authored
Now that only encoders can be stolen that are part of the state steal_encoder no longer needs to inspect all connectors, just those that are part of the atomic state. Changes since v1: - Change return value to void, can no longer fail. Signed-off-by:
-
Maarten Lankhorst authored
The current check doesn't handle the case where we don't steal an encoder, but keep it on the current connector. If we repurpose disable_conflicting_encoders to do the checking, we just have to reject the ones that conflict. Changes since v1: - Return early with empty encoder_mask, drm_for_each_connector requires connection_mutex held. Changes since v2: - Add comments for the loops. Signed-off-by:
-
Maarten Lankhorst authored
Instead of failing with -EINVAL when conflicting encoders are found, the legacy set_config will disable other connectors when encoders conflict. With the previous commit this becomes a lot easier to implement. set_config only adds connectors to the state that are modified, and because of the previous commit that calls add_affected_connectors only on set->crtc it means any connector not part of the modeset can be stolen from. We disable the connector in that case, and possibly the crtc if required. Atomic modeset itself still doesn't allow encoder stealing, the results would be too unpredictable. Signed-off-by:
-
Maarten Lankhorst authored
There's no need to have a separate function to get the crtc which is stolen, this can already be found when actually stealing the encoder. drm_for_each_connector already checks for connection_mutex, so use that macro now. Changes since v1: - Do not check for NULL crtc in connector_state, this may happen when a crtc is disabled and its encoder stolen. - Because of this, use connector->state->crtc instead of conn_state->crtc. Signed-off-by:
-
- 04 Mar, 2016 17 commits
-
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Carlos Palminha <palminha@synopsys.com> Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Maarten Lankhorst authored
Minor cleanup, connector and connector_state are always non-NULL here. Signed-off-by:
-
Maarten Lankhorst authored
With the addition of crtc_state->connector_mask other connectors from different crtc's aren't needed any more to determine if a crtc has connectors, so only call add_affected_connectors on the target crtc. This allows a cleanup to first remove all current connectors, then add all set->connectors to the target crtc. Signed-off-by:
-
- 29 Feb, 2016 1 commit
-
-
Liu Ying authored
The function __drm_framebuffer_unregister() has boilerplate code to drop idr reference. Let's replace it with drm_mode_object_put() to simplify the code. Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
-
- 26 Feb, 2016 6 commits
-
-
http://git.agner.ch/git/linux-drm-fsl-dcuDave Airlie authored
As previously discussed, this is my first pull request for the DCU DRM driver along with the change in MAINTAINERS. https://lkml.org/lkml/2016/1/7/26 The pull contains some code cleanup changes (e.g. removing all error handling for the regmap calls) and several fixes. * 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: fix register initialization drm/fsl-dcu: use mode flags for hsync/vsync polarity drm/fsl-dcu: fix alpha blending drm/fsl-dcu: mask all interrupts on initialization drm/fsl-dcu: handle initialization errors properly drm/fsl-dcu: avoid memory leak on errors drm/fsl-dcu: remove regmap return value checks drm/fsl-dcu: specify volatile registers drm: fsl-dcu: Fix no fb check bug MAINTAINERS: update for Freescale DCU DRM driver
-
Stefan Agner authored
The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for Vybrid) whereas the register enumeration start from 1 (1-10 for LS1021a and 1-9 for Vybrid). The loop started off from 0 for both iterations and initialized the number of layers inclusive, which is one layer too many. All extensively written registers seem to be unassigned, it seems that the write to those registers did not do any harm in practice. Signed-off-by:Stefan Agner <stefan@agner.ch>
-
Stefan Agner authored
The current default configuration is as follows: - Invert VSYNC signal (active LOW) - Invert HSYNC signal (active LOW) The mode flags allow to specify the required polarity per mode. Furthermore, none of the current driver settings is actually a standard polarity. This patch applies the current driver default polarities as explicit flags to the display which has been introduced with the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now also parses the flags field and applies the configuration accordingly, by using the following values as standard polarities: (e.g. when no flags are specified): - VSYNC signal not inverted (active HIGH) - HSYNC signal not inverted (active HIGH) Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Stefan Agner authored
Fix alpha blending by enabling alpha blending for the whole frame if a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also support color modes without alpha channel (DRM_FORMAT_XRGB*) by just not enabling alpha blending on layer level. Signed-off-by: -
Stefan Agner authored
The state of the interrupt mask register on initialization is unknown, e.g. U-Boot could already used the DCU. So depending on the boot loader, the outcome of the interrupt mask register could be different. A defined state is much more preferable. Also, there is no value in keeping interrupts enabled which we don't need. Therefor, mask all interrupts on initialization. Signed-off-by: -
Stefan Agner authored
If initialization fails (e.g. due to missing panel node or deferred probe) make sure to roll-back all operations and return the error code. Signed-off-by:
-
