- 23 Mar, 2019 40 commits
-
-
Marc Kleine-Budde authored
[ Upstream commit 22233f7b ] This patch fixes the following checkpatch warning: | Macro argument 'x' may be better as '(x)' to avoid precedence issues Fixes: cbffaf7a ("can: flexcan: Always use last mailbox for TX") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mark Walton authored
commit c378b3aa upstream. If a PCA953x gpio was used as an interrupt and then released, the shutdown function was trying to extract the pca953x_chip pointer directly from the irq_data, but in reality was getting the gpio_chip structure. The net effect was that the subsequent writes to the data structure corrupted data in the gpio_chip structure, which wasn't immediately obvious until attempting to use the GPIO again in the future, at which point the kernel panics. This fix correctly extracts the pca953x_chip structure via the gpio_chip structure, as is correctly done in the other irq functions. Fixes: 0a70fe00 ("gpio: pca953x: Clear irq trigger type on irq shutdown") Cc: stable@vger.kernel.org Signed-off-by:
Mark Walton <mark.walton@serialtek.com> Reviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Loic Poulain authored
commit 1d4c41f3 upstream. According to the ov5640 specification (2.7 power up sequence), host can access the sensor's registers 20ms after reset. Trying to access them before leads to undefined behavior and result in sporadic initialization errors. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Adam Ford <aford173@gmail.com> Signed-off-by:
-
Sowjanya Komatineni authored
commit f4e3f4ae upstream. Tegra186 and prior supports maximum 4K bytes per packet transfer including 12 bytes of packet header. This patch fixes max write length limit to account packet header size for transfers. Cc: stable@vger.kernel.org # 4.4+ Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
QiaoChong authored
commit 21698fd5 upstream. In the original code before 181bf1e8 the loop was continuing until it finds the first matching superios[i].io and p->base. But after 181bf1e8 the logic changed and the loop now returns the pointer to the first mismatched array element which is then used in get_superio_dma() and get_superio_irq() and thus returning the wrong value. Fix the condition so that it now returns the correct pointer. Fixes: 181bf1e8 ("parport_pc: clean up the modified while loops using for") Cc: Alan Cox <alan@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
QiaoChong <qiaochong@loongson.cn> [rewrite the commit message] Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Alexander Shishkin authored
commit 9ed3f222 upstream. When an output port driver is removed, also remove references to it from any masters. Failing to do this causes a NULL ptr dereference when configuring another output port: > BUG: unable to handle kernel NULL pointer dereference at 000000000000000d > RIP: 0010:master_attr_store+0x9d/0x160 [intel_th_gth] > Call Trace: > dev_attr_store+0x1b/0x30 > sysfs_kf_write+0x3c/0x50 > kernfs_fop_write+0x125/0x1a0 > __vfs_write+0x3a/0x190 > ? __vfs_write+0x5/0x190 > ? _cond_resched+0x1a/0x50 > ? rcu_all_qs+0x5/0xb0 > ? __vfs_write+0x5/0x190 > vfs_write+0xb8/0x1b0 > ksys_write+0x55/0xc0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x5a/0x140 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: b27a6a3f ("intel_th: Add Global Trace Hub driver") CC: stable@vger.kernel.org # v4.4+ Reported-by:
Ammy Yi <ammy.yi@intel.com> Signed-off-by:
-
Heikki Krogerus authored
commit 2b6e4924 upstream. With string type property entries we need to use sizeof(const char *) instead of the number of characters as the length of the entry. If the string was shorter then sizeof(const char *), attempts to read it would have failed with -EOVERFLOW. The problem has been hidden because all build-in string properties have had a string longer then 8 characters until now. Fixes: a85f4204 ("device property: helper macros for property entry creation") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Zev Weiss authored
commit 8cf7630b upstream. This bug has apparently existed since the introduction of this function in the pre-git era (4500e917 in Thomas Gleixner's history.git, "[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of neighbour sysctls."). As a minimal fix we can simply duplicate the corresponding check in do_proc_dointvec_conv(). Link: http://lkml.kernel.org/r/20190207123426.9202-3-zev@bewilderbeest.netSigned-off-by:
Zev Weiss <zev@bewilderbeest.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> [2.6.2+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Stancek authored
commit fc8efd2d upstream. LTP testcase mtest06 [1] can trigger a crash on s390x running 5.0.0-rc8. This is a stress test, where one thread mmaps/writes/munmaps memory area and other thread is trying to read from it: CPU: 0 PID: 2611 Comm: mmap1 Not tainted 5.0.0-rc8+ #51 Hardware name: IBM 2964 N63 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 00000000001ac8d8 (__lock_acquire+0x7/0x7a8) Call Trace: ([<0000000000000000>] (null)) [<00000000001adae4>] lock_acquire+0xec/0x258 [<000000000080d1ac>] _raw_spin_lock_bh+0x5c/0x98 [<000000000012a780>] page_table_free+0x48/0x1a8 [<00000000002f6e54>] do_fault+0xdc/0x670 [<00000000002fadae>] __handle_mm_fault+0x416/0x5f0 [<00000000002fb138>] handle_mm_fault+0x1b0/0x320 [<00000000001248cc>] do_dat_exception+0x19c/0x2c8 [<000000000080e5ee>] pgm_check_handler+0x19e/0x200 page_table_free() is called with NULL mm parameter, but because "0" is a valid address on s390 (see S390_lowcore), it keeps going until it eventually crashes in lockdep's lock_acquire. This crash is reproducible at least since 4.14. Problem is that "vmf->vma" used in do_fault() can become stale. Because mmap_sem may be released, other threads can come in, call munmap() and cause "vma" be returned to kmem cache, and get zeroed/re-initialized and re-used: handle_mm_fault | __handle_mm_fault | do_fault | vma = vmf->vma | do_read_fault | __do_fault | vma->vm_ops->fault(vmf); | mmap_sem is released | | | do_munmap() | remove_vma_list() | remove_vma() | vm_area_free() | # vma is released | ... | # same vma is allocated | # from kmem cache | do_mmap() | vm_area_alloc() | memset(vma, 0, ...) | pte_free(vma->vm_mm, ...); | page_table_free | spin_lock_bh(&mm->context.lock);| <crash> | Cache mm_struct to avoid using potentially stale "vma". [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/mem/mtest06/mmap1.c Link: http://lkml.kernel.org/r/5b3fdf19e2a5be460a384b936f5b56e13733f1b8.1551595137.git.jstancek@redhat.comSigned-off-by:
Jan Stancek <jstancek@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Acked-by:
Rafael Aquini <aquini@redhat.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Roman Penyaev authored
commit 401592d2 upstream. When VM_NO_GUARD is not set area->size includes adjacent guard page, thus for correct size checking get_vm_area_size() should be used, but not area->size. This fixes possible kernel oops when userspace tries to mmap an area on 1 page bigger than was allocated by vmalloc_user() call: the size check inside remap_vmalloc_range_partial() accounts non-existing guard page also, so check successfully passes but vmalloc_to_page() returns NULL (guard page does not physically exist). The following code pattern example should trigger an oops: static int oops_mmap(struct file *file, struct vm_area_struct *vma) { void *mem; mem = vmalloc_user(4096); BUG_ON(!mem); /* Do not care about mem leak */ return remap_vmalloc_range(vma, mem, 0); } And userspace simply mmaps size + PAGE_SIZE: mmap(NULL, 8192, PROT_WRITE|PROT_READ, MAP_PRIVATE, fd, 0); Possible candidates for oops which do not have any explicit size checks: *** drivers/media/usb/stkwebcam/stk-webcam.c: v4l_stk_mmap[789] ret = remap_vmalloc_range(vma, sbuf->buffer, 0); Or the following one: *** drivers/video/fbdev/core/fbmem.c static int fb_mmap(struct file *file, struct vm_area_struct * vma) ... res = fb->fb_mmap(info, vma); Where fb_mmap callback calls remap_vmalloc_range() directly without any explicit checks: *** drivers/video/fbdev/vfb.c static int vfb_mmap(struct fb_info *info, struct vm_area_struct *vma) { return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff); } Link: http://lkml.kernel.org/r/20190103145954.16942-2-rpenyaev@suse.deSigned-off-by:
Roman Penyaev <rpenyaev@suse.de> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joe Perches <joe@perches.com> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
zhongjiang authored
commit 46612b75 upstream. When soft_offline_in_use_page() runs on a thp tail page after pmd is split, we trigger the following VM_BUG_ON_PAGE(): Memory failure: 0x3755ff: non anonymous thp __get_any_page: 0x3755ff: unknown zero refcount page type 2fffff80000000 Soft offlining pfn 0x34d805 at process virtual address 0x20fff000 page:ffffea000d360140 count:0 mapcount:0 mapping:0000000000000000 index:0x1 flags: 0x2fffff80000000() raw: 002fffff80000000 ffffea000d360108 ffffea000d360188 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:519! soft_offline_in_use_page() passed refcount and page lock from tail page to head page, which is not needed because we can pass any subpage to split_huge_page(). Naoya had fixed a similar issue in c3901e72 ("mm: hwpoison: fix thp split handling in memory_failure()"). But he missed fixing soft offline. Link: http://lkml.kernel.org/r/1551452476-24000-1-git-send-email-zhongjiang@huawei.com Fixes: 61f5d698 ("mm: re-enable THP") Signed-off-by:
zhongjiang <zhongjiang@huawei.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by:
-
Phuong Nguyen authored
commit d9140a0d upstream. This commit fixes the issue that USB-DMAC hangs silently after system resumes on R-Car Gen3 hence renesas_usbhs will not work correctly when using USB-DMAC for bulk transfer e.g. ethernet or serial gadgets. The issue can be reproduced by these steps: 1. modprobe g_serial 2. Suspend and resume system. 3. connect a usb cable to host side 4. Transfer data from Host to Target 5. cat /dev/ttyGS0 (Target side) 6. echo "test" > /dev/ttyACM0 (Host side) The 'cat' will not result anything. However, system still can work normally. Currently, USB-DMAC driver does not have system sleep callbacks hence this driver relies on the PM core to force runtime suspend/resume to suspend and reinitialize USB-DMAC during system resume. After the commit 17218e00 ("PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"), PM core will not force runtime suspend/resume anymore so this issue happens. To solve this, make system suspend resume explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks. SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC suspended after and initialized before renesas_usbhs." Signed-off-by:
Phuong Nguyen <phuong.nguyen.xw@renesas.com> Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ [shimoda: revise the commit log and add Cc tag] Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Nikolaus Voss authored
commit 8a863a60 upstream. Commit 1a2f474d handles block _reads_ separately with plain-I2C adapters, but the problem described with regmap-i2c not handling SMBus block transfers (i.e. read and writes) correctly also exists with writes. As workaround, this patch adds a block write function the same way 1a2f474d adds a block read function. Fixes: 1a2f474d ("usb: typec: tps6598x: handle block reads separately with plain-I2C adapters") Fixes: 0a4c005b ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by:
Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
Dmitry Osipenko authored
commit 563b9372 upstream. The ChipIdea's platform device need to be unregistered on Tegra's driver module removal. Fixes: dfebb5f4 ("usb: chipidea: Add support for Tegra20/30/114/124") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Paul Cercueil authored
commit 7ca4c922 upstream. The 'div' field does not represent a number of bits used to divide (understand: right-shift) the divider, but a number itself used to divide the divider. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Paul Cercueil authored
commit bc5d922c upstream. Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz. This results in a theorical divider of 41.999993 which is then rounded up to 42. The .round_rate function would then return (180 MHz / 42) as the clock, rounded down, so 4.285714 MHz. Calling clk_set_rate on 4.285714 MHz would round the rate again, and give a theorical divider of 42,0000028, now rounded up to 43, and the rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not what we requested. Fix this by rounding up the divisions. Signed-off-by:
-
Krzysztof Kozlowski authored
commit 785c9f41 upstream. Platform driver driver_override field should not be initialized from const memory because the core later kfree() it. If driver_override is manually set later through sysfs, kfree() of old value leads to: $ echo "new_value" > /sys/bus/platform/drivers/.../driver_override kernel BUG at ../mm/slub.c:3960! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kfree) from [<c058e8c0>] (platform_set_driver_override+0x84/0xac) (platform_set_driver_override) from [<c058e908>] (driver_override_store+0x20/0x34) (driver_override_store) from [<c031f778>] (kernfs_fop_write+0x100/0x1dc) (kernfs_fop_write) from [<c0296de8>] (__vfs_write+0x2c/0x17c) (__vfs_write) from [<c02970c4>] (vfs_write+0xa4/0x188) (vfs_write) from [<c02972e8>] (ksys_write+0x4c/0xac) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) The clk-exynos5-subcmu driver uses override only for the purpose of creating meaningful names for children devices (matching names of power domains, e.g. DISP, MFC). The driver_override was not developed for this purpose so just switch to default names of devices to fix the issue. Fixes: b06a532b ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 5f0b6216 upstream. During initialization of subdevices if platform_device_alloc() failed, returned NULL pointer will be later dereferenced. Add proper error paths to exynos5_clk_register_subcmu(). The return value of this function is still ignored because at this stage of init there is nothing we can do. Fixes: b06a532b ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tony Lindgren authored
commit 5ae51d67 upstream. I noticed that modprobe clk-twl6040 can fail after a cold boot with: abe_cm:clk:0010:0: failed to enable ... Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20 WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24 ... (clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90) (_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244) (_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44) (omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108) (sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8) (__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80) (rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694) (rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84) (__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c) (sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98) After searching around for a similar issue, I came across an earlier fix that never got merged upstream in the Android tree for glass-omap-xrr02. There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata" by Misael Lopez Cruz <misael.lopez@ti.com>. Based on my observations, this fix is also needed when cold booting devices, and not just for deeper idle modes. Since we now have a clock driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare(). Cc: Misael Lopez Cruz <misael.lopez@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kunihiko Hayashi authored
commit 52128223 upstream. Need to set the update bit in UNIPHIER_CLK_CPUGEAR_UPD to update the CPU-gear value. Fixes: d08f1f0d ("clk: uniphier: add CPU-gear change (cpufreq) support") Cc: linux-stable@vger.kernel.org Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Jan Kara authored
commit 1c2d1421 upstream. When ext2 filesystem is created with 64k block size, ext2_max_size() will return value less than 0. Also, we cannot write any file in this fs since the sb->maxbytes is less than 0. The core of the problem is that the size of block index tree for such large block size is more than i_blocks can carry. So fix the computation to count with this possibility. File size limits computed with the new function for the full range of possible block sizes look like: bits file_size 10 17247252480 11 275415851008 12 2196873666560 13 2197948973056 14 2198486220800 15 2198754754560 16 2198888906752 CC: stable@vger.kernel.org Reported-by:
yangerkun <yangerkun@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vaibhav Jain authored
commit edeb304f upstream. Within cxl module, iteration over array 'adapter->afu' may be racy at few points as it might be simultaneously read during an EEH and its contents being set to NULL while driver is being unloaded or unbound from the adapter. This might result in a NULL pointer to 'struct afu' being de-referenced during an EEH thereby causing a kernel oops. This patch fixes this by making sure that all access to the array 'adapter->afu' is wrapped within the context of spin-lock 'adapter->afu_list_lock'. Fixes: 9e8df8a2 ("cxl: EEH support") Cc: stable@vger.kernel.org # v4.3+ Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Acked-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael J. Ruhl authored
commit bc5add09 upstream. When disabling and removing a receive context, it is possible for an asynchronous event (i.e IRQ) to occur. Because of this, there is a race between cleaning up the context, and the context being used by the asynchronous event. cpu 0 (context cleanup) rc->ref_count-- (ref_count == 0) hfi1_rcd_free() cpu 1 (IRQ (with rcd index)) rcd_get_by_index() lock ref_count+++ <-- reference count race (WARNING) return rcd unlock cpu 0 hfi1_free_ctxtdata() <-- incorrect free location lock remove rcd from array unlock free rcd This race will cause the following WARNING trace: WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1] CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015 Call Trace: dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_null+0x1d/0x20 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1] is_rcv_urgent_int+0x24/0x90 [hfi1] general_interrupt+0x1b6/0x210 [hfi1] __handle_irq_event_percpu+0x44/0x1c0 handle_irq_event_percpu+0x32/0x80 handle_irq_event+0x3c/0x60 handle_edge_irq+0x7f/0x150 handle_irq+0xe4/0x1a0 do_IRQ+0x4d/0xf0 common_interrupt+0x162/0x162 The race can also lead to a use after free which could be similar to: general protection fault: 0000 1 SMP CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015 task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230 Call Trace: ? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1] hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1] hfi1_aio_write+0xba/0x110 [hfi1] do_sync_readv_writev+0x7b/0xd0 do_readv_writev+0xce/0x260 ? handle_mm_fault+0x39d/0x9b0 ? pick_next_task_fair+0x5f/0x1b0 ? sched_clock_cpu+0x85/0xc0 ? __schedule+0x13a/0x890 vfs_writev+0x35/0x60 SyS_writev+0x7f/0x110 system_call_fastpath+0x22/0x27 Use the appropriate kref API to verify access. Reorder context cleanup to ensure context removal before cleanup occurs correctly. Cc: stable@vger.kernel.org # v4.14.0+ Fixes: f683c80c ("IB/hfi1: Resolve kernel panics by reference counting receive contexts") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Lucas Stach authored
commit 3afc8299 upstream. Since 7c5925af (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925af ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dongdong Liu authored
commit 9f08a5d8 upstream. Previously dpc_handler() called aer_get_device_error_info() without initializing info->severity, so aer_get_device_error_info() relied on uninitialized data. Add dpc_get_aer_uncorrect_severity() to read the port's AER status, mask, and severity registers and set info->severity. Also, clear the port's AER fatal error status bits. Fixes: 8aefa9b0 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by:
Dongdong Liu <liudongdong3@huawei.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Bjorn Helgaas authored
commit 10ecc818 upstream. RussianNeuroMancer reported that the Intel 7265 wifi on a Dell Venue 11 Pro 7140 table stopped working after wakeup from suspend and bisected the problem to 9ab105de ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR"). David Ward reported the same problem on a Dell Latitude 7350. After af8bb9f8 ("PCI/ACPI: Request LTR control from platform before using it"), we don't enable LTR unless the platform has granted LTR control to us. In addition, we don't notice if the platform had already enabled LTR itself. After 9ab105de ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR"), we avoid using LTR if we don't think the path to the device has LTR enabled. The combination means that if the platform itself enables LTR but declines to give the OS control over LTR, we unnecessarily avoided using ASPM L1.2. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201469 Fixes: 9ab105de ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR") Fixes: af8bb9f8 ("PCI/ACPI: Request LTR control from platform before using it") Reported-by:
RussianNeuroMancer <russianneuromancer@ya.ru> Reported-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
Jan Kara authored
commit f96c3ac8 upstream. When computing maximum size of filesystem possible with given number of group descriptor blocks, we forget to include s_first_data_block into the number of blocks. Thus for filesystems with non-zero s_first_data_block it can happen that computed maximum filesystem size is actually lower than current filesystem size which confuses the code and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on flex_gd->count == 0. The problem can be reproduced like: truncate -s 100g /tmp/image mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768 mount -t ext4 -o loop /tmp/image /mnt resize2fs /dev/loop0 262145 resize2fs /dev/loop0 300000 Fix the problem by properly including s_first_data_block into the computed number of filesystem blocks. Fixes: 1c6bd717 "ext4: convert file system to meta_bg if needed..." Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
yangerkun authored
commit abdc644e upstream. The reason is that while swapping two inode, we swap the flags too. Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things since we're not resetting the address operations structure. The simplest way to keep things sane is to restrict the flags that can be swapped. Signed-off-by:
-
yangerkun authored
commit aa507b5f upstream. While do swap between two inode, they swap i_data without update quota information. Also, swap_inode_boot_loader can do "revert" somtimes, so update the quota while all operations has been finished. Signed-off-by:
-
yangerkun authored
commit a46c68a3 upstream. While do swap, we should make sure there has no new dirty page since we should swap i_data between two inode: 1.We should lock i_mmap_sem with write to avoid new pagecache from mmap read/write; 2.Change filemap_flush to filemap_write_and_wait and move them to the space protected by inode lock to avoid new pagecache from buffer read/write. Signed-off-by:
-
yangerkun authored
commit 67a11611 upstream. Before really do swap between inode and boot inode, something need to check to avoid invalid or not permitted operation, like does this inode has inline data. But the condition check should be protected by inode lock to avoid change while swapping. Also some other condition will not change between swapping, but there has no problem to do this under inode lock. Signed-off-by:
-
Arnd Bergmann authored
commit 9505b98c upstream. pxa_cpufreq_init_voltages() is marked __init but usually inlined into the non-__init pxa_cpufreq_init() function. When building with clang, it can stay as a standalone function in a discarded section, and produce this warning: WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages() The function pxa_cpufreq_init() references the function __init pxa_cpufreq_init_voltages(). This is often because pxa_cpufreq_init lacks a __init annotation or the annotation of pxa_cpufreq_init_voltages is wrong. Fixes: 50e77fcd ("ARM: pxa: remove __init from cpufreq_driver->init()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Yangtao Li authored
commit 446fae2b upstream. of_cpu_device_node_get() will increase the refcount of device_node, it is necessary to call of_node_put() at the end to release the refcount. Fixes: 9eb15dbb ("cpufreq: Add cpufreq driver for Tegra124") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Viresh Kumar authored
commit 0334906c upstream. Commit 5ad7346b ("cpufreq: kryo: Add module remove and exit") made it possible to build the kryo cpufreq driver as a module, but it failed to release all the resources, i.e. OPP tables, when the module is unloaded. This patch fixes it by releasing the OPP tables, by calling dev_pm_opp_put_supported_hw() for them, from the qcom_cpufreq_kryo_remove() routine. The array of pointers to the OPP tables is also allocated dynamically now in qcom_cpufreq_kryo_probe(), as the pointers will be required while releasing the resources. Compile tested only. Cc: 4.18+ <stable@vger.kernel.org> # v4.18+ Fixes: 5ad7346b ("cpufreq: kryo: Add module remove and exit") Reviewed-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
-
Masami Hiramatsu authored
commit 0192e653 upstream. Prohibit probing on optprobe template code, since it is not a code but a template instruction sequence. If we modify this template, copied template must be broken. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 9326638c ("kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation") Link: http://lkml.kernel.org/r/154998787911.31052.15274376330136234452.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Doug Berger authored
commit 33517881 upstream. Using the irq_gc_lock/irq_gc_unlock functions in the suspend and resume functions creates the opportunity for a deadlock during suspend, resume, and shutdown. Using the irq_gc_lock_irqsave/ irq_gc_unlock_irqrestore variants prevents this possible deadlock. Cc: stable@vger.kernel.org Fixes: 7f646e92 ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> [maz: tidied up $SUBJECT] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Zenghui Yu authored
commit 8d565748 upstream. In current logic, its_parse_indirect_baser() will be invoked twice when allocating Device tables. Add a *break* to omit the unnecessary and annoying (might be ...) invoking. Fixes: 32bd44dc ("irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size") Cc: stable@vger.kernel.org Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Lubomir Rintel authored
commit 607076a9 upstream. It doesn't make sense and the USB core warns on each submit of such URB, easily flooding the message buffer with tracebacks. Analogous issue was fixed in regular libertas driver in commit 6528d880 ("libertas: don't set URB_ZERO_PACKET on IN USB transfer"). Cc: stable@vger.kernel.org Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Reviewed-by:
Steve deRosier <derosier@cal-sierra.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
commit baef1c90 upstream. Using the batch API from the interconnect driver sometimes leads to a KASAN error due to an access to freed memory. This is easier to trigger with threadirqs on the kernel commandline. BUG: KASAN: use-after-free in rpmh_tx_done+0x114/0x12c Read of size 1 at addr fffffff51414ad84 by task irq/110-apps_rs/57 CPU: 0 PID: 57 Comm: irq/110-apps_rs Tainted: G W 4.19.10 #72 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c print_address_description+0x74/0x240 kasan_report+0x250/0x26c __asan_report_load1_noabort+0x20/0x2c rpmh_tx_done+0x114/0x12c tcs_tx_done+0x450/0x768 irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 Allocated by task 385: kasan_kmalloc+0xac/0x148 __kmalloc+0x170/0x1e4 rpmh_write_batch+0x174/0x540 qcom_icc_set+0x8dc/0x9ac icc_set+0x288/0x2e8 a6xx_gmu_stop+0x320/0x3c0 a6xx_pm_suspend+0x108/0x124 adreno_suspend+0x50/0x60 pm_generic_runtime_suspend+0x60/0x78 __rpm_callback+0x214/0x32c rpm_callback+0x54/0x184 rpm_suspend+0x3f8/0xa90 pm_runtime_work+0xb4/0x178 process_one_work+0x544/0xbc0 worker_thread+0x514/0x7d0 kthread+0x248/0x260 ret_from_fork+0x10/0x18 Freed by task 385: __kasan_slab_free+0x12c/0x1e0 kasan_slab_free+0x10/0x1c kfree+0x134/0x588 rpmh_write_batch+0x49c/0x540 qcom_icc_set+0x8dc/0x9ac icc_set+0x288/0x2e8 a6xx_gmu_stop+0x320/0x3c0 a6xx_pm_suspend+0x108/0x124 adreno_suspend+0x50/0x60 cr50_spi spi5.0: SPI transfer timed out pm_generic_runtime_suspend+0x60/0x78 __rpm_callback+0x214/0x32c rpm_callback+0x54/0x184 rpm_suspend+0x3f8/0xa90 pm_runtime_work+0xb4/0x178 process_one_work+0x544/0xbc0 worker_thread+0x514/0x7d0 kthread+0x248/0x260 ret_from_fork+0x10/0x18 The buggy address belongs to the object at fffffff51414ac80 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 260 bytes inside of 512-byte region [fffffff51414ac80, fffffff51414ae80) The buggy address belongs to the page: page:ffffffbfd4505200 count:1 mapcount:0 mapping:fffffff51e00c680 index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 ffffffbfd4529008 ffffffbfd44f9208 fffffff51e00c680 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: fffffff51414ac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fffffff51414ad00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >fffffff51414ad80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ fffffff51414ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fffffff51414ae80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc The batch API sets the same completion for each rpmh message that's sent and then loops through all the messages and waits for that single completion declared on the stack to be completed before returning from the function and freeing the message structures. Unfortunately, some messages may still be in process and 'stuck' in the TCS. At some later point, the tcs_tx_done() interrupt will run and try to process messages that have already been freed at the end of rpmh_write_batch(). This will in turn access the 'needs_free' member of the rpmh_request structure and cause KASAN to complain. Furthermore, if there's a message that's completed in rpmh_tx_done() and freed immediately after the complete() call is made we'll be racing with potentially freed memory when accessing the 'needs_free' member: CPU0 CPU1 ---- ---- rpmh_tx_done() complete(&compl) wait_for_completion(&compl) kfree(rpm_msg) if (rpm_msg->needs_free) <KASAN warning splat> Let's fix this by allocating a chunk of completions for each message and waiting for all of them to be completed before returning from the batch API. Alternatively, we could wait for the last message in the batch, but that may be a more complicated change because it looks like tcs_tx_done() just iterates through the indices of the queue and completes each message instead of tracking the last inserted message and completing that first. Fixes: c8790cb6 ("drivers: qcom: rpmh: add support for batch RPMH request") Cc: Lina Iyer <ilina@codeaurora.org> Cc: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Reviewed-by:
Lina Iyer <ilina@codeaurora.org> Reviewed-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Filipe Manana authored
commit 8e928218 upstream. In the past we had data corruption when reading compressed extents that are shared within the same file and they are consecutive, this got fixed by commit 005efedf ("Btrfs: fix read corruption of compressed and shared extents") and by commit 808f80b4 ("Btrfs: update fix for read corruption of compressed and shared extents"). However there was a case that was missing in those fixes, which is when the shared and compressed extents are referenced with a non-zero offset. The following shell script creates a reproducer for this issue: #!/bin/bash mkfs.btrfs -f /dev/sdc &> /dev/null mount -o compress /dev/sdc /mnt/sdc # Create a file with 3 consecutive compressed extents, each has an # uncompressed size of 128Kb and a compressed size of 4Kb. for ((i = 1; i <= 3; i++)); do head -c 4096 /dev/zero for ((j = 1; j <= 31; j++)); do head -c 4096 /dev/zero | tr '\0' "\377" done done > /mnt/sdc/foobar sync echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)" # Clone the first extent into offsets 128K and 256K. xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar sync echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)" # Punch holes into the regions that are already full of zeroes. xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar sync echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)" echo "Dropping page cache..." sysctl -q vm.drop_caches=1 echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)" umount /dev/sdc When running the script we get the following output: Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar linked 131072/131072 bytes at offset 131072 128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec) linked 131072/131072 bytes at offset 262144 128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec) Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar Dropping page cache... Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar This happens because after reading all the pages of the extent in the range from 128K to 256K for example, we read the hole at offset 256K and then when reading the page at offset 260K we don't submit the existing bio, which is responsible for filling all the page in the range 128K to 256K only, therefore adding the pages from range 260K to 384K to the existing bio and submitting it after iterating over the entire range. Once the bio completes, the uncompressed data fills only the pages in the range 128K to 256K because there's no more data read from disk, leaving the pages in the range 260K to 384K unfilled. It is just a slightly different variant of what was solved by commit 005efedf ("Btrfs: fix read corruption of compressed and shared extents"). Fix this by forcing a bio submit, during readpages(), whenever we find a compressed extent map for a page that is different from the extent map for the previous page or has a different starting offset (in case it's the same compressed extent), instead of the extent map's original start offset. A test case for fstests follows soon. Reported-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Fixes: 808f80b4 ("Btrfs: update fix for read corruption of compressed and shared extents") Fixes: 005efedf ("Btrfs: fix read corruption of compressed and shared extents") Cc: stable@vger.kernel.org # 4.3+ Tested-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
