Instead of direct list pointer accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct skb_queue_head pointer accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use skb_queue_walk() instead.

Adjust inner loop test to utilize and skb_queue_is_first().
Unfortunately we have to keep pkt_cnt around because it is
used by a latter loop in this function.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use __skb_peek() instead.
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper, __skb_peek(), and use it in ppp_mp_reconstruct().
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct SKB list accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

By hand copies of SKB list handlers do not belong in individual packet
schedulers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead, adjust __qdisc_enqueue_tail() such that HTB can use it
instead.

The only other caller of __qdisc_enqueue_tail() is
qdisc_enqueue_tail() so we can move the backlog and return value
handling (which HTB doesn't need/want) to the latter.
Signed-off-by: David S. Miller <davem@davemloft.net>

After the conversion to fib6_info, rt6i_prefsrc has a single user that
reads the value and otherwise it is only set. The one reader can be
converted to use rt->from so rt6i_prefsrc can be removed, reducing
rt6_info by another 20 bytes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent commit updated vlan_cmd.dropnovlan_fm but failed to remove
the older assignment.  Fix this by removing the former redundant
assignment.

Detected by CoverityScan, CID#1473290 ("Unused value")

Fixes: a89cdd8e ("cxgb4: impose mandatory VLAN usage when non-zero TAG ID")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

if failover_register failed, 'err' code should be set correctly

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC >= 4 also supports CBS. Lets enable the TC Ops for these versions.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the new locking rule, we have to take tcf_lock for both
->init() and ->dump(), as RTNL will be removed.

Use tcf spinlock to protect private nat action data from concurrent
modification during dump. (nat init already uses tcf spinlock when changing
action state)
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the new locking rule, we have to take tcf_lock for both
->init() and ->dump(), as RTNL will be removed.

Use tcf lock to protect skbedit action struct private data from concurrent
modification in init and dump. Use rcu swap operation to reassign params
pointer under protection of tcf lock. (old params value is not used by
init, so there is no need of standalone rcu dereference step)

Remove rtnl lock assertion that is no longer required.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Essentially reverts commit 8fd75c58 ("i40e: move ethtool
stats boiler plate code to i40e_ethtool_stats.h", 2018-08-30), and
additionally moves the similar code in i40evf into i40evf_ethtool.c.

The code was intially moved from i40e_ethtool.c into i40e_ethtool_stats.h
as a way of better logically organizing the code. This has two problems.
First, we can't have an inline function with variadic arguments on all
platforms. Second, it gave the appearance that we had plans to share
code between the i40e and i40evf drivers, due to having a near copy of
the contents in the i40evf/i40e_ethtool_stats.h file.

Patches which actually attempt to combine or share code between the i40e
and i40evf drivers have not materialized, and are likely a ways off.

Rather than fixing the one function which causes build issues, just move
this code back into the i40e_ethtool.c and i40evf_ethtool.c files. Note
that we also change these functions back from static inlines to just
statics, since they're no longer in a header file.

We can revisit this if/when work is done to actually attempt to share
code between drivers. Alternatively, this stats code could be made more
generic so that it can be shared across drivers as part of ethtool
kernel work.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case B53_SRAB is enabled, but not B53_SERDES, we can get the
following linking error:

ERROR: "b53_serdes_init" [drivers/net/dsa/b53/b53_srab.ko] undefined!

We also need to ifdef the body of b53_srab_serdes_map_lane() since it
would not be used when B53_SERDES is disabled and that would produce a
warning.

Fixes: 0e01491d ("net: dsa: b53: Add SerDes support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a non-zero VLAN Tag ID is passed to t4_set_vlan_acl()
then impose mandatory VLAN Usage with that VLAN ID.
I.e any other VLAN ID should result in packets getting
dropped.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 48875222 ("liquidio: Add spoof checking on a VF MAC address")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As you are already in a tasklet, it is unnecessary to call spin_lock_bh.
Signed-off-by: jun qian <hangdianqj@163.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no way for user-space to know what a given DSA network device's
tagging protocol is. Expose this information through a dsa/tagging
attribute which reflects the tagging protocol currently in use.

This is helpful for configuration (e.g: none behaves dramatically
different wrt. bridges) as well as for packet capture tools when there
is not a proper Ethernet type available.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both WARN_ON() and WARN_ONCE() already contain an unlikely(), so it's not
necessary to wrap it into another.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Madalin Bucur <madalin.bucur@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c: In function 'bnxt_tc_parse_flow':
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:186:6: warning:
 variable 'addr_type' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, OVS only parses the IP protocol number for the first
IPv6 fragment, but sets the IP protocol number for the later fragments
to be NEXTHDF_FRAGMENT.  This patch tries to derive the IP protocol
number for the IPV6 later frags so that we can match that.
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c: In function 'cn23xx_setup_octeon_vf_device':
drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:619:20: warning:
 variable 'ring_flag' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Provide the API to set/unset the spoof checking feature.
2. Add a function to periodically provide the count of found
   packets with spoof VF MAC address.
3. Prevent VF MAC address changing while the spoofchk of the VF is
   on unless the changing MAC address is issued from PF.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5e-updates-2018-09-05

This series provides updates to mlx5 ethernet driver.

1) Starting with a four patches series to optimize flow counters updates,
From Vlad Buslov:
==============================================

By default mlx5 driver updates cached counters each second. Update function
consumes noticeable amount of CPU resources. The goal of this patch series
is to optimize update function.

Investigation revealed following bottlenecks in fs counters
implementation:
 1) Update code(scheduled each second) iterates over all counters twice.
 (first for finding and deleting counters that are marked for deletion,
 second iteration is for actually updating the counters)
 2) Counters are stored in rb tree. Linear iteration over all rb tree
 elements(rb_next in profiling data) consumed ~65% of time spent in
 update function.

Following optimizations were implemented:
 1) Instead of just marking counters for deletion, store them in
 standalone list. This removes first iteration over whole counters tree.
 2) Store counters in sorted list to optimize traversing them and remove
 calls to rb_next.

First implementation of these changes caused degradation of performance,
instead of improving it. Investigation revealed that there first cache
line of struct mlx5_fc is full and adding anything to it causes amount
of cache misses to double. To mitigate that, following refactorings were
implemented:
 - Change 'addlist' list type from double linked to single linked. This
 allowes to get free space for one additional pointer that is used to
 store deletion list(optimization 1)
 - Substitute rb tree with idr. Idr is non-intrusive data structure and
 doesn't require adding any new members to struct mlx5_fc. Use free
 space that became available for double linked sorted list that is used
 for traversing all counters. (optimization 2)

Described changes reduced CPU time spent in mlx5_fc_stats_work from 70%
to 44%. (global perf profile mode)
============================================

The rest of the series are misc updates:

2) From Kamal, Move mlx5e_priv_flags into en_ethtool.c, to avoid a
compilation warning.

3) From Roi Dayan, Move Q counters allocation and drop RQ to init_rx profile
function to avoid allocating Q counters when not required.

4) From Shay Agroskin, Replace PTP clock lock from RW lock to seq lock.
Almost double the packet rate when timestamping is active on multiple TX
queues.

5) From: Natali Shechtman, set ECN for received packets using CQE indication.

6) From: Alaa Hleihel, don't set CHECKSUM_COMPLETE on SCTP packets.
CHECKSUM_COMPLETE is not applicable to SCTP protocol.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: b53: SerDes support

This patch series adds support for the SerDes found on NorthStar Plus
(NSP) which allows us to use the SFP port on the BCM958625HR board (and
other similar designs).

Changes in v3:

- properly hunk the request_threaded_irq() bits into patch #2

Changes in v2:

- migrate to threaded interrupt (Andrew)
- fixed a case where MLO_AN_FIXED's mac_config would still call into
  the serdes_config callback
- added an additional check on the phylink interface in mac_config
- default to ARCH_BCM_NSP instead of ARCH_BCM_IPROC which is really
  the NSP Kconfig bit we want
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the Northstar Plus SerDes which is accessed through a
special page of the switch. Since this is something that most people
probably will not want to use, make it a configurable option with a
default on ARCH_BCM_NSP where it is the most useful currently.

The SerDes supports both SGMII and 1000baseX modes for both lanes, and
2500baseX for one of the lanes, and is internally looking like a
seemingly standard MII PHY, except for the few bits that got repurposed.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for PHYLINK, things are reasonably straight forward since we
do not yet support SerDes interfaces, that leaves us with just
MLO_AN_PHY and MLO_AN_FIXED to deal with.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extract the logic from b53_adjust_link() responsible for overriding a
given port's link, speed, duplex and pause settings and make two helper
functions to set the port's configuration and the port's link settings.
We will make use of both, as separate functions while adding PHYLINK
support next.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the SRAB driver to manage per-port interrupts. Since we cannot
sleep during b53_io_ops, schedule a workqueue whenever we get a port
specific interrupt. We will later make use of this to call back into
PHYLINK when there is e.g: a link state change.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some switches expose individual interrupt line(s) for port specific
event(s), allow configuring these interrupts at an appropriate time
during port_enable/disable callbacks where all port specific resources
are known to be set-up and ready for use.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a new qed firmware with fixes and support for new features.

Fixes:
- Fix a rare case of device crash with iWARP, iSCSI or FCoE offload.
- Fix GRE tunneled traffic when iWARP offload is enabled.
- Fix RoCE failure in ib_send_bw when using inline data.
- Fix latency optimization flow for inline WQEs.
- BigBear 100G fix

RDMA:
- Reduce task context size.
- Application page sizes above 2GB support.
- Performance improvements.

ETH:
- Tenant DCB support.
- Replace RSS indirection table update interface.

Misc:
- Debug Tools changes.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christian Brauner says:

====================
rtnetlink: add IFA_TARGET_NETNSID for RTM_GETADDR

This iteration should mainly addresses the suggestion to use
IFA_TARGET_NETNSID as the property name. Additionally, an an alias for
the already existing IFLA_IF_NETNSID property is added.

Note that two additional cleanup patches (8\9 and 9\9) were added to
address concerns raised that passing more than 6 arguments to a function
will cause additional variables to be pushed onto the stack instead of
being placed into registers. The way I addressed this is by introducing
two new struct inet{6}_fill_args that are used to pass common
information down to inet{6}_fill_if*() functions shortening all those
functions to three pointer arguments.
If this is something more people than Kirill find useful they can be
kept if not they can simply be dropped in later iterations of this
series or when merging.

Here is a short overview:
1. Rename from IFA_IF_NETNSID to IFA_TARGET_NETNSID.
2. Add IFLA_TARGET_NETNSID as an alias for IFA_IFLA_NETNSID and switch
   all occurrences over to the new alias.
3. Add inet4_fill_args struct to avoid passing more than 6 arguments in
   inet_fill_if*() functions.
4. Add inet6_fill_args struct to avoid passing more than 6 arguments in
   inet_fill_if*() functions.

The only functional change is the export of rtnl_get_net_ns_capable()
which is needed in case ipv6 is built as a module.

Note, I did not change the property name to IFA_TARGET_NSID as there was
no clear agreement what would be preferred. My personal preference is to
keep the IFA_IF_NETNSID name because it aligns naturally with the
IFLA_IF_NETNSID property for RTM_*LINK requests. Jiri seems to prefer
this name too.
However, if there is agreement that another property name makes more
sense I'm happy to send a v2 that changes this.

To test this patchset I performed 1 million getifaddrs() requests
against a network namespace containing 5 interfaces (lo, eth{0-4}). The
first test used a network namespace aware getifaddrs() implementation I
wrote and the second test used the traditional setns() + getifaddrs()
method. The results show that this patchsets allows userspace to cut
retrieval time in half:
1. netns_getifaddrs():      82 microseconds
2. setns() + getifaddrs(): 162 microseconds

A while back we introduced and enabled IFLA_IF_NETNSID in
RTM_{DEL,GET,NEW}LINK requests (cf. [1], [2], [3], [4], [5]). This has led
to signficant performance increases since it allows userspace to avoid
taking the hit of a setns(netns_fd, CLONE_NEWNET), then getting the
interfaces from the netns associated with the netns_fd. Especially when a
lot of network namespaces are in use, using setns() becomes increasingly
problematic when performance matters.
Usually, RTML_GETLINK requests are followed by RTM_GETADDR requests (cf.
getifaddrs() style functions and friends). But currently, RTM_GETADDR
requests do not support a similar property like IFLA_IF_NETNSID for
RTM_*LINK requests.
This is problematic since userspace can retrieve interfaces from another
network namespace by sending a IFLA_IF_NETNSID property along but
RTM_GETLINK request but is still forced to use the legacy setns() style of
retrieving interfaces in RTM_GETADDR requests.

The goal of this series is to make it possible to perform RTM_GETADDR
requests on different network namespaces. To this end a new IFA_IF_NETNSID
property for RTM_*ADDR requests is introduced. It can be used to send a
network namespace identifier along in RTM_*ADDR requests.  The network
namespace identifier will be used to retrieve the target network namespace
in which the request is supposed to be fulfilled.  This aligns the behavior
of RTM_*ADDR requests with the behavior of RTM_*LINK requests.

- The caller must have assigned a valid network namespace identifier for
  the target network namespace.
- The caller must have CAP_NET_ADMIN in the owning user namespace of the
  target network namespace.

[1]: commit 7973bfd8 ("rtnetlink: remove check for IFLA_IF_NETNSID")
[2]: commit 5bb8ed07 ("rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK")
[3]: commit b61ad68a ("rtnetlink: enable IFLA_IF_NETNSID for RTM_DELLINK")
[4]: commit c310bfcb ("rtnetlink: enable IFLA_IF_NETNSID for RTM_SETLINK")
[5]: commit 7c4f63ba ("rtnetlink: enable IFLA_IF_NETNSID in do_setlink()")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

inet6_fill_if{addr,mcaddr, acaddr}() already took 6 arguments which
meant the 7th argument would need to be pushed onto the stack on x86.
Add a new struct inet6_fill_args which holds common information passed
to inet6_fill_if{addr,mcaddr, acaddr}() and shortens the functions to
three pointer arguments.
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_fill_ifaddr() already took 6 arguments which meant the 7th argument
would need to be pushed onto the stack on x86.
Add a new struct inet_fill_args which holds common information passed
to inet_fill_ifaddr() and shortens the function to three pointer arguments.
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IFLA_TARGET_NETNSID is the new alias for IFLA_IF_NETNSID. This commit
replaces all occurrences of IFLA_IF_NETNSID with the new alias to
indicate that this identifier is the preferred one.
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds IFLA_TARGET_NETNSID as an alias for IFLA_IF_NETNSID for
RTM_*LINK requests.
The new name is clearer and also aligns with the newly introduced
IFA_TARGET_NETNSID propert for RTM_*ADDR requests.
Signed-off-by: Christian Brauner <christian@brauner.io>
Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I don't see how the type - which is one of
RTM_{GETADDR,GETROUTE,GETNETCONF} - can change. So do the message type
calculation once before entering the for loop.
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>