- 21 Sep, 2010 40 commits
-
-
Pekka Enberg authored
The wbsoft_tx() function is a simple wrapper on top of MLMESendFrame() so inline the latter to the former. Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Pekka Enberg authored
This patch changes MLMESendFrame to return NETDEV_TX_BUSY if MLME frame is in use so that wbsoft_tx() doesn't blindly return NETDEV_TX_OK in that case. Cc: Sandro Bonazzola <sandro.bonazzola@gmail.com> Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
This patch removes unused fields from "struct wbsoft_priv". Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
This patch removes unused spinlocks from "struct mlme_frame" and "struct wbsoft_priv". Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
The mlme_s.h header is included in one place. As the header is very small, just inline it to core.h. Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
There's bunch of macros in mlme_s.h that aren't used for anything. Kill them off. Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
The scan_s.h header is not actually used for anything so just kill it off. Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
This patch removes remaining typedef declarations from the w35und driver. Most of them were unused so I just killed them off completely. Cc: Lars Lindley <lindley@coyote.org> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
Fixes an uninitialized variable access in _rx_iq_calibration_loop_winbond(): CC [M] drivers/staging/winbond/phy_calibration.o drivers/staging/winbond/phy_calibration.c: In function ‘_rx_iq_calibration_loop_winbond’: drivers/staging/winbond/phy_calibration.c:1138: warning: ‘val’ is used uninitialized in this function Cc: Lars Lindley <lindley@coyote.org> Acked-by: -
Jonathan Cameron authored
Also remove no unused precision attr. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by:
-
Jonathan Cameron authored
This has been replaced by a separate _index attribute Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Also fixes a missing NULL to terminate one of the attribute arrays. Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
As Manuel Stahl observed, putting data into the naming of an attribute (beyond what it is for) breaks the one value per attribute rule (in spirit at least). Hence we introduce a separate _index attribute for each scan element to tell userspace the ordering in output from the buffer. This will generate a lot of sparse warnings as all drivers will have unused iio_const_attrs created. The rest of the set will clean these up. The final patch will remove the old indexing method. It is not here so as to maintain one or other interface for all devices as this set progresses. Signed-off-by:
-
Jonathan Cameron authored
The job this was intended to do (never implemented) is now done by explicit definition of _type attributes in all drivers Signed-off-by:
-
Jonathan Cameron authored
The bit depth of 14 for the supply adc on the datasheet is highly suspicious. Confirmation requested from Analog. Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Note some of the in driver type specifications do not match the data sheet. I am assuming the datasheet is correct. This bug would not have been apparent in the driver as these values were unusued. Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
As both signed and unsigned in attributes exist, each element must be fully specified. Signed-off-by:
-
Jonathan Cameron authored
Also, adds a macro to make defining such attributes simple. Signed-off-by:
-
Henry Ptasinski authored
This patch to the existing bcm80211 directory in the staging tree adds fullmac driver support for the BCM4329 SDIO chip from Broadcom. Configuration of the mac80211 driver or the fullmac driver can be done through menuconfig. Signed-off-by:
Henry Ptasinski <henryp@broadcom.com> Signed-off-by:
Nohee Ko <noheek@broadcom.com> Signed-off-by:
-
Markus Grabner authored
Signed-off-by:
Markus Grabner <grabner@icg.tugraz.at> Signed-off-by:
-
Vasiliy Kulikov authored
g_pBlockTable has only DeviceInfo.wDataBlockNum elements. Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Signed-off-by:
-
Vasiliy Kulikov authored
kmalloc() may fail, if so return error code. Signed-off-by:
-
Pavan Savoy authored
move all the header information to ti_wilink_st.h. This header would then not only serve the local modules like the st_core.c, st_kim.c and st_ll.c but also the external modules/protocol drivers that are dependent on the shared transport driver. Modify the source files to include the new header ti_wilink_st.h, Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Signed-off-by:
-
Pavan Savoy authored
replace uint and family by a much more proper u8/u16 types. This is required specifically for data members of structures coming in from the chip and data members parsed from the binary firmware file. Signed-off-by:
-
Vipin Mehta authored
The commit fixes a race condition in the initialization portion of the driver. The problem was observed while testing with the kernel in the staging-next tree. The wait on the ready event is signalled prematurely before setting the arVersion.wlan_ver and arVersion.abi_ver. The code waiting on this semaphore checks for the validity of these values and hence may proceed with an un-updated values of these fields. The wakeup signal is now sent after these values are set. Signed-off-by:
Vipin Mehta <vmehta@atheros.com> Signed-off-by:
-
Vipin Mehta authored
The commit fixes a compilation error that was encountered while using a specific kernel configuration file. The problem was the use of some functions defined in <linux/semaphore.h> without including the header file explicitly. It was probably working before because of the dependency getting implicitly satisfied via some other header file. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Vipin Mehta authored
Eliminating the inclusion of the same header file more than once. The files being removed are already included by osapi_linux.h. Reported-by:
-
