- 09 Feb, 2021 31 commits
-
-
Huazhong Tan authored
Parameter vf in hclge_vf_rate_param_check() is unused now, so remove it. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
Since hns3_uninit_all_ring() only returns 0, so remove this redundant return value and function declaration in hns3_enet.h. Signed-off-by:
-
Peng Li authored
The type of parameter mpf_bd_num and pf_bd_num in hclge_query_bd_num() should be u32* instead of int*, so change them. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
The type of parameters in hclge_parse_speed() should be unsigned type, so change them. Signed-off-by:
-
Jiaran Zhang authored
Fix an issue where the formatting symbol of the formatting input and output function does not match the actual type. Signed-off-by:
Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by:
-
Yufeng Mo authored
In macro definitions, parentheses are unnecessary in some cases, such as the calling parameter of a function, the left variable of the equal sign, and so on. So remove these unnecessary parentheses according to these rules. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Peng Li authored
To make the code more readable, this patch adds a definition for the magic number 126 used for the default shaper param ir_b, and rename macro DIVISOR_IR_B_126. No functional change. Signed-off-by:
-
Jian Shen authored
Since the real tx queue number and real rx queue number always be updated when netdev opens, it's redundant to call hclge_client_setup_tc to do the same thing. So remove it. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Yonglong Liu authored
queue_id, qset_id and other IDs are unsigned type, so modify the corresponding local variables' type in hclge_dbg_dump_tm_map() from signed to unsigned. kstrtouint() and the print format should be updated as well. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
David S. Miller authored
Wei Wang says: ==================== implement kthread based napi polle The idea of moving the napi poll process out of softirq context to a kernel thread based context is not new. Paolo Abeni and Hannes Frederic Sowa have proposed patches to move napi poll to kthread back in 2016. And Felix Fietkau has also proposed patches of similar ideas to use workqueue to process napi poll just a few weeks ago. The main reason we'd like to push forward with this idea is that the scheduler has poor visibility into cpu cycles spent in softirq context, and is not able to make optimal scheduling decisions of the user threads. For example, we see in one of the application benchmark where network load is high, the CPUs handling network softirqs has ~80% cpu util. And user threads are still scheduled on those CPUs, despite other more idle cpus available in the system. And we see very high tail latencies. In this case, we have to explicitly pin away user threads from the CPUs handling network softirqs to ensure good performance. With napi poll moved to kthread, scheduler is in charge of scheduling both the kthreads handling network load, and the user threads, and is able to make better decisions. In the previous benchmark, if we do this and we pin the kthreads processing napi poll to specific CPUs, scheduler is able to schedule user threads away from these CPUs automatically. And the reason we prefer 1 kthread per napi, instead of 1 workqueue entity per host, is that kthread is more configurable than workqueue, and we could leverage existing tuning tools for threads, like taskset, chrt, etc to tune scheduling class and cpu set, etc. Another reason is if we eventually want to provide busy poll feature using kernel threads for napi poll, kthread seems to be more suitable than workqueue. Furthermore, for large platforms with 2 NICs attached to 2 sockets, kthread is more flexible to be pinned to different sets of CPUs. In this patch series, I revived Paolo and Hannes's patch in 2016 and made modifications. Then there are changes proposed by Felix, Jakub, Paolo and myself on top of those, with suggestions from Eric Dumazet. In terms of performance, I ran tcp_rr tests with 1000 flows with various request/response sizes, with RFS/RPS disabled, and compared performance between softirq vs kthread vs workqueue (patchset proposed by Felix Fietkau). Host has 56 hyper threads and 100Gbps nic, 8 rx queues and only 1 numa node. All threads are unpinned. req/resp QPS 50%tile 90%tile 99%tile 99.9%tile softirq 1B/1B 2.75M 337us 376us 1.04ms 3.69ms kthread 1B/1B 2.67M 371us 408us 455us 550us workq 1B/1B 2.56M 384us 435us 673us 822us softirq 5KB/5KB 1.46M 678us 750us 969us 2.78ms kthread 5KB/5KB 1.44M 695us 789us 891us 1.06ms workq 5KB/5KB 1.34M 720us 905us 1.06ms 1.57ms softirq 1MB/1MB 11.0K 79ms 166ms 306ms 630ms kthread 1MB/1MB 11.0K 75ms 177ms 303ms 596ms workq 1MB/1MB 11.0K 79ms 180ms 303ms 587ms When running workqueue implementation, I found the number of threads used is usually twice as much as kthread implementation. This probably introduces higher scheduling cost, which results in higher tail latencies in most cases. I also ran an application benchmark, which performs fixed qps remote SSD read/write operations, with various sizes. Again, both with RFS/RPS disabled. The result is as follows: op_size QPS 50%tile 95%tile 99%tile 99.9%tile softirq 4K 572.6K 385us 1.5ms 3.16ms 6.41ms kthread 4K 572.6K 390us 803us 2.21ms 6.83ms workq 4k 572.6K 384us 763us 3.12ms 6.87ms softirq 64K 157.9K 736us 1.17ms 3.40ms 13.75ms kthread 64K 157.9K 745us 1.23ms 2.76ms 9.87ms workq 64K 157.9K 746us 1.23ms 2.76ms 9.96ms softirq 1M 10.98K 2.03ms 3.10ms 3.7ms 11.56ms kthread 1M 10.98K 2.13ms 3.21ms 4.02ms 13.3ms workq 1M 10.98K 2.13ms 3.20ms 3.99ms 14.12ms In this set of tests, the latency is predominant by the SSD operation. Also, the user threads are much busier compared to tcp_rr tests. We have to pin the kthreads/workqueue threads to limit to a few CPUs, to not disturb user threads, and provide some isolation. Changes since v9: Small change in napi_poll() in patch 1. Split napi_kthread_stop() functionality to add separately in napi_disable() and netif_napi_del() in patch 2. Add description for napi_set_threaded() and return dev->threaded when dev->napi_list is empty for threaded sysfs in patch 3. Changes since v8: Added description for threaded param in struct net_device in patch 2. Changes since v7: Break napi_set_threaded() into 2 parts, one to create kthread called from netif_napi_add(), the other to set threaded bit in napi_enable(), to get rid of inconsistency through all napi in 1 dev. Added documentation for /sys/class/net/<dev>/threaded. Changes since v6: Added memory barrier in napi_set_threaded(). Changed /sys/class/net/<dev>/thread to a ternary value. Change dev->threaded to a bit instead of bool. Changes since v5: Removed ASSERT_RTNL() from napi_set_threaded() and removed rtnl_lock() operation from napi_enable(). Changes since v4: Recorded the threaded setting in dev and restore it in napi_enable(). Changes since v3: Merged and rearranged patches in a logical order for easier review. Changed sysfs control to be per device. Changes since v2: Corrected typo in patch 1, and updated the cover letter with more detailed and updated test results. Changes since v1: Replaced kthread_create() with kthread_run() in patch 5 as suggested by Felix Fietkau. Changes since RFC: Renamed the kthreads to be napi/<dev>-<napi_id> in patch 5 as suggested by Hannes Frederic Sowa. ==================== Signed-off-by: -
Wei Wang authored
This patch adds a new sysfs attribute to the network device class. Said attribute provides a per-device control to enable/disable the threaded mode for all the napi instances of the given network device, without the need for a device up/down. User sets it to 1 or 0 to enable or disable threaded mode. Note: when switching between threaded and the current softirq based mode for a napi instance, it will not immediately take effect if the napi is currently being polled. The mode switch will happen for the next time napi_schedule() is called. Co-developed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Wei Wang <weiwan@google.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
Wei Wang authored
This patch allows running each napi poll loop inside its own kernel thread. The kthread is created during netif_napi_add() if dev->threaded is set. And threaded mode is enabled in napi_enable(). We will provide a way to set dev->threaded and enable threaded mode without a device up/down in the following patch. Once that threaded mode is enabled and the kthread is started, napi_schedule() will wake-up such thread instead of scheduling the softirq. The threaded poll loop behaves quite likely the net_rx_action, but it does not have to manipulate local irqs and uses an explicit scheduling point based on netdev_budget. Co-developed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Felix Fietkau authored
This commit introduces a new function __napi_poll() which does the main logic of the existing napi_poll() function, and will be called by other functions in later commits. This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and is proposed as part of the patch to move napi work to work_queue context. This commit by itself is a code restructure. Signed-off-by:
-
Rafał Miłecki authored
BCM4908 SoCs family uses Ethernel controller that includes UniMAC but uses different DMA engine (than other controllers) and requires different programming. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Rafał Miłecki authored
BCM4908 is a family of SoCs with integrated Ethernet controller. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-02-09 1) Support TSO on xfrm interfaces. From Eyal Birger. 2) Variable calculation simplifications in esp4/esp6. From Jiapeng Chong / Jiapeng Zhong. 3) Fix a return code in xfrm_do_migrate. From Zheng Yongjun. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Jay Vosburgh authored
Provide documentation for src_valid_mark sysctl, which was added in commit 28f6aeea ("net: restore ip source validation"). Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Michael Walle authored
It is nowhere used in the kernel. It also seems to be lacking the proper fiber advertise flags. Remove it. Signed-off-by:
Michael Walle <michael@walle.cc> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Michael Walle authored
genphy_read_status() is already the default for the .read_status() op. Drop the unnecessary references. Signed-off-by:
-
David S. Miller authored
net: Add support for route offload failure notifications Ido Schimmel says: ==================== This is a complementary series to the one merged in commit 389cb1ec ("Merge branch 'add-notifications-when-route-hardware-flags-change'"). The previous series added RTM_NEWROUTE notifications to user space whenever a route was successfully installed in hardware or when its state in hardware changed. This allows routing daemons to delay advertisement of routes until they are installed in hardware. However, if route installation failed, a routing daemon will wait indefinitely for a notification that will never come. The aim of this series is to provide a failure notification via a new flag (RTM_F_OFFLOAD_FAILED) in the RTM_NEWROUTE message. Upon such a notification a routing daemon may decide to withdraw the route from the FIB. Series overview: Patch #1 adds the new RTM_F_OFFLOAD_FAILED flag Patches #2-#3 and #4-#5 add failure notifications to IPv4 and IPv6, respectively Patches #6-#8 teach netdevsim to fail route installation via a new knob in debugfs Patch #9 extends mlxsw to mark routes with the new flag Patch #10 adds test cases for the new notification over netdevsim ==================== Signed-off-by:
-
Amit Cohen authored
Add cases to verify that when debugfs variable "fail_route_offload" is set, notification with "rt_offload_failed" flag is received. Extend the existing cases to verify that when sysctl "fib_notify_on_flag_change" is set to 2, the kernel emits notifications only for failed route installation. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv4 route offload failed [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] TEST: IPv6 route offload failed [ OK ] Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Amit Cohen authored
When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and route insertion fails, FIB abort is triggered. After aborting, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: -
Amit Cohen authored
Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: -
Ido Schimmel authored
Initialize the dummy FIB offload module after debugfs, so that the FIB module could create its own directory there. Signed-off-by:
-
Amit Cohen authored
The next patch will add the ability to fail route offload controlled by debugfs variable called "fail_route_offload". If we vetoed the addition, we might get a delete or append notification for a route we do not have. Therefore, do not warn if route was not found. Signed-off-by:
-
Amit Cohen authored
Add the value '2' to 'fib_notify_on_flag_change' to allow sending notifications only for failed route installation. Separate value is added for such notifications because there are less of them, so they do not impact performance and some users will find them more important. Signed-off-by:
-
Amit Cohen authored
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv6 routes, so that users will have better visibility into the offload process. 'struct fib6_info' is extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase struct size. Signed-off-by:
-
Amit Cohen authored
Add the value '2' to 'fib_notify_on_flag_change' to allow sending notifications only for failed route installation. Separate value is added for such notifications because there are less of them, so they do not impact performance and some users will find them more important. Signed-off-by:
-
Amit Cohen authored
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias', and 'struct fib_rt_info' are extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase structs size. Signed-off-by:
-
Amit Cohen authored
The flag indicates to user space that route offload failed. Previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, but if the offload fails there is no indication to user-space. The flag will be used in subsequent patches by netdevsim and mlxsw to indicate to user space that route offload failed, so that users will have better visibility into the offload process. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-updates-2021-02-04 Vlad Buslov says: ================= Implement support for VF tunneling Abstract Currently, mlx5 only supports configuration with tunnel endpoint IP address on uplink representor. Remove implicit and explicit assumptions of tunnel always being terminated on uplink and implement necessary infrastructure for configuring tunnels on VF representors and updating rules on such tunnels according to routing changes. SW TC model From TC perspective VF tunnel configuration requires two rules in both directions: TX rules 1. Rule that redirects packets from UL to VF rep that has the tunnel endpoint IP address: $ tc -s filter show dev enp8s0f0 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac 16:c9:a0:2d:69:2c src_mac 0c:42:a1:58:ab:e4 eth_type ipv4 ip_flags nofrag in_hw in_hw_count 1 action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen index 3 ref 1 bind 1 installed 377 sec used 0 sec Action statistics: Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 114096 bytes 952 pkt backlog 0b 0p requeues 0 cookie 878fa48d8c423fc08c3b6ca599b50a97 no_percpu used_hw_stats delayed 2. Rule that decapsulates the tunneled flow and redirects to destination VF representor: $ tc -s filter show dev vxlan_sys_4789 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac ca:2e:a7:3f:f5:0f src_mac 0a:40:bd:30:89:99 eth_type ipv4 enc_dst_ip 7.7.7.5 enc_src_ip 7.7.7.1 enc_key_id 98 enc_dst_port 4789 enc_tos 0 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 installed 434 sec used 434 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen index 4 ref 1 bind 1 installed 434 sec used 0 sec Action statistics: Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 129936 bytes 1082 pkt backlog 0b 0p requeues 0 cookie ac17cf398c4c69e4a5b2f7aabd1b88ff no_percpu used_hw_stats delayed RX rules 1. Rule that encapsulates the tunneled flow and redirects packets from source VF rep to tunnel device: $ tc -s filter show dev enp8s0f0_1 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac 0a:40:bd:30:89:99 src_mac ca:2e:a7:3f:f5:0f eth_type ipv4 ip_tos 0/0x3 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key set src_ip 7.7.7.5 dst_ip 7.7.7.1 key_id 98 dst_port 4789 nocsum ttl 64 pipe index 1 ref 1 bind 1 installed 411 sec used 411 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 no_percpu used_hw_stats delayed action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen index 1 ref 1 bind 1 installed 411 sec used 0 sec Action statistics: Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 5615833 bytes 4028 pkt backlog 0b 0p requeues 0 cookie bb406d45d343bf7ade9690ae80c7cba4 no_percpu used_hw_stats delayed 2. Rule that redirects from tunnel device to UL rep: $ tc -s filter show dev vxlan_sys_4789 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac ca:2e:a7:3f:f5:0f src_mac 0a:40:bd:30:89:99 eth_type ipv4 enc_dst_ip 7.7.7.5 enc_src_ip 7.7.7.1 enc_key_id 98 enc_dst_port 4789 enc_tos 0 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 installed 434 sec used 434 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen index 4 ref 1 bind 1 installed 434 sec used 0 sec Action statistics: Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 129936 bytes 1082 pkt backlog 0b 0p requeues 0 cookie ac17cf398c4c69e4a5b2f7aabd1b88ff no_percpu used_hw_stats delayed HW offloads model For hardware offload the goal is to mach packet on both rules without exposing it to software on tunnel endpoint VF. In order to achieve this for tx, TC implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification rule to overwrite packet source port to the value of tunnel VF. Eswitch code is modified to recirculate such packets after source port value is changed, which allows second tx rules to match. For rx path indirect table infrastructure is used to allow fully processing VF tunnel traffic in hardware. To implement such pipeline driver needs to program the hardware after matching on UL rule to overwrite source vport from UL to tunnel VF and recirculate the packet to the root table to allow matching on the rule installed on tunnel VF. For this, indirect table matches all encapsulated traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by the miss rule. Such configuration will cause packet to appear on VF representor instead of VF itself if packet has been matches by indirect table rule based on tunnel parameters but missed on second rule (after recirculation). Handle such case by marking packets processed by indirect table with special 0xFFF value in reg_c1 and extending slow table with additional flow group that matches on reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF mark). When creating offloads fdb tables, install one rule per VF vport to match on recirculated miss packets and redirect them to appropriate VF vport. Routing events In order to support routing changes and migration of tunnel device between different endpoint VFs, implement routing infrastructure and update it with FIB events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel rule is attached to a routing entry, which is shared for rules of same tunnel. On FIB event the work is scheduled to delete/recreate all rules of affected tunnel. Note: only vxlan tunnel type is supported by this series. =================
-
- 08 Feb, 2021 9 commits
-
-
Heiner Kallweit authored
It is likely that this is a leftover from T3 driver heritage. cxgb4 uses the PCI core VPD access code that handles detection of VPD capabilities. Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Looking through patchwork I don't see that there was any consensus to use switchdev notifiers only in case of netlink provided port flags but not sysfs (as a sort of deprecation, punishment or anything like that), so we should probably keep the user interface consistent in terms of functionality. http://patchwork.ozlabs.org/project/netdev/patch/20170605092043.3523-3-jiri@resnulli.us/ http://patchwork.ozlabs.org/project/netdev/patch/20170608064428.4785-3-jiri@resnulli.us/ Fixes: 3922285d ("net: bridge: Add support for offloading port attributes") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Phil Sutter authored
Kernel's key folding basically consists of shifting away least significant zero bits in mask and masking the resulting value with (divisor - 1). Test for u32's 'sample' option to behave identical. Suggested-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Xin Long authored
In rxrpc_open_socket(), now it's using sock_create_kern() and kernel_bind() to create a udp tunnel socket, and other kernel APIs to set up it. These code can be replaced with udp tunnel APIs udp_sock_create() and setup_udp_tunnel_sock(), and it'll simplify rxrpc_open_socket(). Note that with this patch, the udp tunnel socket will always bind to a random port if transport is not provided by users, which is suggested by David Howells, thanks! Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by:
-
Alexander Duyck authored
In order to access the suboordinate dev for a device we should be holding the rtnl_lock when outside of the transmit path. The existing code was not doing that for the sysfs dump function and as a result we were open to a possible race. To resolve that take the rtnl lock prior to accessing the sb_dev field of the Tx queue and release it after we have retrieved the tc for the queue. Signed-off-by:
-
wengjianfeng authored
The variable r is defined at the beginning and initialized to 0 until the function returns r, and the variable r is not reassigned.Therefore, we do not need to define the variable r, just return 0 directly at the end of the function. Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./tools/testing/selftests/net/so_txtime.c:199:3-4: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Andrea Mayer authored
The set of required attributes for a given SRv6 behavior is identified using a bitmap stored in an unsigned long, since the initial design of SRv6 networking in Linux. Recently the same approach has been used for identifying the optional attributes. However, the number of attributes supported by SRv6 behaviors depends on the size of the unsigned long type which changes with the architecture. Indeed, on a 64-bit architecture, an SRv6 behavior can support up to 64 attributes while on a 32-bit architecture it can support at most 32 attributes. To fool-proof the processing of SRv6 behaviors we verify, at compile time, that the set of all supported SRv6 attributes can be encoded into a bitmap stored in an unsigned long. Otherwise, kernel build fails forcing developers to reconsider adding a new attribute or extend the total number of supported attributes by the SRv6 behaviors. Moreover, we replace all patterns (1 << i) with the macro SEG6_F_ATTR(i) in order to address potential overflow issues caused by 32-bit signed arithmetic. Thanks to Colin Ian King for catching the overflow problem, providing a solution and inspiring this patch. Thanks to Jakub Kicinski for his useful suggestions during the design of this patch. v2: - remove the SEG6_LOCAL_MAX_SUPP which is not strictly needed: it can be derived from the unsigned long type. Thanks to David Ahern for pointing it out. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210206170934.5982-1-andrea.mayer@uniroma2.itSigned-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== This feature/cleanup patchset is an updated version of the pull request of Feb 2nd (batadv-next-pullrequest-20210202) and includes the following patches: - Bump version strings, by Simon Wunderlich (added commit log) - Drop publication years from copyright info, by Sven Eckelmann (replaced the previous patch which updated copyright years, as per our discussion) - Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged) - Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged) * tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge: batman-adv: Fix names for kernel-doc blocks batman-adv: Avoid sizeof on flexible structure batman-adv: Drop publication years from copyright info batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20210208165938.13262-1-sw@simonwunderlich.deSigned-off-by:
-
