Pull xfs updates from Darrick Wong:
 "The big new feature here is that the mount code now only bothers to
  try to free stale COW staging extents if the fs unmounted uncleanly.
  This should reduce mount times, particularly on filesystems supporting
  reflink and containing a large number of allocation groups.

  Everything else this cycle are bugfixes, as the iomap folios
  conversion should be plenty enough excitement for anyone. That and I
  ran out of brain bandwidth after Thanksgiving last year.

  Summary:

   - Fix log recovery with da btree buffers when metauuid is in use.

   - Fix type coercion problems in xattr buffer size validation.

   - Fix a bug in online scrub dir leaf bestcount checking.

   - Only run COW recovery when recovering the log.

   - Fix symlink target buffer UAF problems and symlink locking problems
     by not exposing xfs innards to the VFS.

   - Fix incorrect quotaoff lock usage.

   - Don't let transactions cancel cleanly if they have deferred work
     items attached.

   - Fix a UAF when we're deciding if we need to relog an intent item.

   - Reduce kvmalloc overhead for log shadow buffers.

   - Clean up sysfs attr group usage.

   - Fix a bug where scrub's bmap/rmap checking could race with a quota
     file block allocation due to insufficient locking.

   - Teach scrub to complain about invalid project ids"

* tag 'xfs-5.17-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: warn about inodes with project id of -1
  xfs: hold quota inode ILOCK_EXCL until the end of dqalloc
  xfs: Remove redundant assignment of mp
  xfs: reduce kvmalloc overhead for CIL shadow buffers
  xfs: sysfs: use default_groups in kobj_type
  xfs: prevent UAF in xfs_log_item_in_current_chkpt
  xfs: prevent a WARN_ONCE() in xfs_ioc_attr_list()
  xfs: Fix comments mentioning xfs_ialloc
  xfs: check sb_meta_uuid for dabuf buffer recovery
  xfs: fix a bug in the online fsck directory leaf1 bestcount check
  xfs: only run COW extent recovery when there are no live extents
  xfs: don't expose internal symlink metadata buffers to the vfs
  xfs: fix quotaoff mutex usage now that we don't support disabling it
  xfs: shut down filesystem if we xfs_trans_cancel with deferred work items

Pull btrfs updates from David Sterba:
 "This end of the year branch is intentionally not that exciting. Most
  of the changes are under the hood, but there are some minor user
  visible improvements and several performance improvements too.

  Features:

   - make send work with concurrent block group relocation.

     We're not allowed to prevent send failing or silently producing
     some bad stream but with more fine grained locking and checks it's
     possible. The send vs deduplication exclusion could reuse the same
     logic in the future.

   - new exclusive operation 'balance paused' to allow adding a device
     to filesystem with paused balance

   - new sysfs file for fsid stored in the per-device directory to help
     distinguish devices when seeding is enabled, the fsid may differ
     from the one reported by the filesystem

  Performance improvements:

   - less metadata needed for directory logging, directory deletion is
     20-40% faster

   - in zoned mode, cache zone information during mount to speed up
     repeated queries (about 50% speedup)

   - free space tree entries get indexed and searched by size (latency
     -30%, search run time -30%)

   - less contention in tree node locking when inserting a key and no
     splits are needed (files/sec in fsmark improves by 1-20%)

  Fixes:

   - fix ENOSPC failure when attempting direct IO write into NOCOW range

   - fix deadlock between quota enable and other quota operations

   - global reserve minimum calculations fixed to account for free space
     tree

   - in zoned mode, fix condition for chunk allocation that may not find
     the right zone for reuse and could lead to early ENOSPC

  Core:

   - global reserve stealing got simplified and cleaned up in evict

   - remove async transaction commit based on manual transaction refs,
     reuse existing kthread and mechanisms to let it commit transaction
     before timeout

   - preparatory work for extent tree v2, add wrappers for global tree
     roots, truncation path cleanups

   - remove readahead framework, it's a bit overengineered and used only
     for scrub, and yet it does not cover all its needs, there is
     another readahead built in the b-tree search that is now used,
     performance drop on HDD is about 5% which is acceptable and scrub
     is often throttled anyway, on SSDs there's no reported drop but
     slight improvement

   - self tests report extent tree state when error occurs

   - replace assert with debugging information when an uncommitted
     transaction is found at unmount time

  Other:

   - error handling improvements

   - other cleanups and refactoring"

* tag 'for-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
  btrfs: output more debug messages for uncommitted transaction
  btrfs: respect the max size in the header when activating swap file
  btrfs: fix argument list that the kdoc format and script verified
  btrfs: remove unnecessary parameter type from compression_decompress_bio
  btrfs: selftests: dump extent io tree if extent-io-tree test failed
  btrfs: scrub: cleanup the argument list of scrub_stripe()
  btrfs: scrub: cleanup the argument list of scrub_chunk()
  btrfs: remove reada infrastructure
  btrfs: scrub: use btrfs_path::reada for extent tree readahead
  btrfs: scrub: remove the unnecessary path parameter for scrub_raid56_parity()
  btrfs: refactor unlock_up
  btrfs: skip transaction commit after failure to create subvolume
  btrfs: zoned: fix chunk allocation condition for zoned allocator
  btrfs: add extent allocator hook to decide to allocate chunk or not
  btrfs: zoned: unset dedicated block group on allocation failure
  btrfs: zoned: drop redundant check for REQ_OP_ZONE_APPEND and btrfs_is_zoned
  btrfs: zoned: sink zone check into btrfs_repair_one_zone
  btrfs: zoned: simplify btrfs_check_meta_write_pointer
  btrfs: zoned: encapsulate inode locking for zoned relocation
  btrfs: sysfs: add devinfo/fsid to retrieve actual fsid from the device
  ...

Pull erofs updates from Gao Xiang:
 "In this cycle, tail-packing data inline for compressed files is now
  supported so that tail pcluster can be stored and read together with
  inode metadata in order to save data I/O and storage space.

  In addition to that, to prepare for the upcoming subpage, folio and
  fscache features, we also introduce meta buffers to get rid of
  erofs_get_meta_page() since it was too close to the page itself.

  In addition, in order to show supported kernel features and control
  sync decompression strategy, new sysfs nodes are introduced in this
  cycle as well.

  Summary:

   - add sysfs interface and a sysfs node to control sync decompression

   - add tail-packing inline support for compressed files

   - get rid of erofs_get_meta_page()"

* tag 'erofs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: use meta buffers for zmap operations
  erofs: use meta buffers for xattr operations
  erofs: use meta buffers for super operations
  erofs: use meta buffers for inode operations
  erofs: introduce meta buffer operations
  erofs: add on-disk compressed tail-packing inline support
  erofs: support inline data decompression
  erofs: support unaligned data decompression
  erofs: introduce z_erofs_fixup_insize
  erofs: tidy up z_erofs_lz4_decompress
  erofs: clean up erofs_map_blocks tracepoints
  erofs: Replace zero-length array with flexible-array member
  erofs: add sysfs node to control sync decompression strategy
  erofs: add sysfs interface
  erofs: rename lz4_0pading to zero_padding

Currently, yenta_dev_suspend_noirq(), yenta_dev_resume_noirq(), and
yenta_pm_ops are covered by "#ifdef CONFIG_PM", which results in
compiler warnings in kernels built with CONFIG_PM_SLEEP=n and
CONFIG_PM=y:

  drivers/pcmcia/yenta_socket.c:1322:12: warning: ‘yenta_dev_resume_noirq’ defined but not used [-Wunused-function]
   1322 | static int yenta_dev_resume_noirq(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~
  drivers/pcmcia/yenta_socket.c:1303:12: warning: ‘yenta_dev_suspend_noirq’ defined but not used [-Wunused-function]
   1303 | static int yenta_dev_suspend_noirq(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~

This affects kernels built without suspend and hibernation.

Avoid these warnings by using "#ifdef CONFIG_PM_SLEEP".

Fixes: 3daaf2c7 ("pcmcia: Make use of the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fs idmapping updates from Christian Brauner:
 "This contains the work to enable the idmapping infrastructure to
  support idmapped mounts of filesystems mounted with an idmapping.

  In addition this contains various cleanups that avoid repeated
  open-coding of the same functionality and simplify the code in quite a
  few places.

  We also finish the renaming of the mapping helpers we started a few
  kernel releases back and move them to a dedicated header to not
  continue polluting the fs header needlessly with low-level idmapping
  helpers. With this series the fs header only contains idmapping
  helpers that interact with fs objects.

  Currently we only support idmapped mounts for filesystems mounted
  without an idmapping themselves. This was a conscious decision
  mentioned in multiple places (cf. [1]).

  As explained at length in [3] it is perfectly fine to extend support
  for idmapped mounts to filesystem's mounted with an idmapping should
  the need arise. The need has been there for some time now (cf. [2]).

  Before we can port any filesystem that is mountable with an idmapping
  to support idmapped mounts in the coming cycles, we need to first
  extend the mapping helpers to account for the filesystem's idmapping.
  This again, is explained at length in our documentation at [3] and
  also in the individual commit messages so here's an overview.

  Currently, the low-level mapping helpers implement the remapping
  algorithms described in [3] in a simplified manner as we could rely on
  the fact that all filesystems supporting idmapped mounts are mounted
  without an idmapping.

  In contrast, filesystems mounted with an idmapping are very likely to
  not use an identity mapping and will instead use a non-identity
  mapping. So the translation step from or into the filesystem's
  idmapping in the remapping algorithm cannot be skipped for such
  filesystems.

  Non-idmapped filesystems and filesystems not supporting idmapped
  mounts are unaffected by this change as the remapping algorithms can
  take the same shortcut as before. If the low-level helpers detect that
  they are dealing with an idmapped mount but the underlying filesystem
  is mounted without an idmapping we can rely on the previous shortcut
  and can continue to skip the translation step from or into the
  filesystem's idmapping. And of course, if the low-level helpers detect
  that they are not dealing with an idmapped mount they can simply
  return the relevant id unchanged; no remapping needs to be performed
  at all.

  These checks guarantee that only the minimal amount of work is
  performed. As before, if idmapped mounts aren't used the low-level
  helpers are idempotent and no work is performed at all"

Link: 2ca4dcc4 ("fs/mount_setattr: tighten permission checks") [1]
Link: https://github.com/containers/podman/issues/10374 [2]
Link: Documentations/filesystems/idmappings.rst [3]
Link: a65e58e7 ("fs: document and rename fsid helpers") [4]

* tag 'fs.idmapped.v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: support mapped mounts of mapped filesystems
  fs: add i_user_ns() helper
  fs: port higher-level mapping helpers
  fs: remove unused low-level mapping helpers
  fs: use low-level mapping helpers
  docs: update mapping documentation
  fs: account for filesystem mappings
  fs: tweak fsuidgid_has_mapping()
  fs: move mapping helpers
  fs: add is_idmapped_mnt() helper

Pull integrity subsystem updates from Mimi Zohar:
 "The few changes are all kexec related:

   - The MOK keys are loaded onto the .platform keyring in order to
     verify the kexec kernel image signature.

     However, the MOK keys should only be trusted when secure boot is
     enabled. Before loading the MOK keys onto the .platform keyring,
     make sure the system is booted in secure boot mode.

   - When carrying the IMA measurement list across kexec, limit dumping
     the measurement list to when dynamic debug or CONFIG_DEBUG is
     enabled.

   - kselftest: add kexec_file_load selftest support for PowerNV and
     other cleanup"

* tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  selftests/kexec: Enable secureboot tests for PowerPC
  ima: silence measurement list hexdump during kexec
  selftests/kexec: update searching for the Kconfig
  selftest/kexec: fix "ignored null byte in input" warning
  integrity: Do not load MOK and MOKx when secure boot be disabled
  ima: Fix undefined arch_ima_get_secureboot() and co

Pull audit updates from Paul Moore:
 "Four audit patches for v5.17:

   - Harden the code through additional use of the struct_size() macro
     and zero-length arrays to flexible-array conversions.

   - Ensure that processes which generate userspace audit records are
     not exempt from the kernel's audit throttling when the audit queues
     are being overrun"

* tag 'audit-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: replace zero-length array with flexible-array member
  audit: use struct_size() helper in audit_[send|make]_reply()
  audit: ensure userspace is penalized the same as the kernel when under pressure
  audit: use struct_size() helper in kmalloc()

Pull selinux updates from Paul Moore:
 "Nothing too significant, but five SELinux patches for v5.17 that do
  the following:

   - Harden the code through additional use of the struct_size() macro

   - Plug some memory leaks

   - Clean up the code via removal of the security_add_mnt_opt() LSM
     hook and minor tweaks to selinux_add_opt()

   - Rename security_task_getsecid_subj() to better reflect its actual
     behavior/use - now called security_current_getsecid_subj()"

* tag 'selinux-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: minor tweaks to selinux_add_opt()
  selinux: fix potential memleak in selinux_add_opt()
  security,selinux: remove security_add_mnt_opt()
  selinux: Use struct_size() helper in kmalloc()
  lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()

Merge tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull TPM updates from Jarkko Sakkinen:
 "Other than bug fixes for TPM, this includes a patch for asymmetric
  keys to allow to look up and verify with self-signed certificates
  (keys without so called AKID - Authority Key Identifier) using a new
  "dn:" prefix in the query"

* tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  lib: remove redundant assignment to variable ret
  tpm: fix NPE on probe for missing device
  tpm: fix potential NULL pointer access in tpm_del_char_device
  tpm: Add Upgrade/Reduced mode support for TPM2 modules
  char: tpm: cr50: Set TPM_FIRMWARE_POWER_MANAGED based on device property
  keys: X.509 public key issuer lookup without AKID
  tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
  tpm: tpm_tis_spi_cr50: Add default RNG quality
  tpm/st33zp24: drop unneeded over-commenting
  tpm: add request_locality before write TPM_INT_ENABLE

Pull pcmcia updates from Dominik Brodowski:
 "A number of odd cleanups and fixes, including one for a small race in
  the handling of the pccardd kernel thread"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: fix setting of kthread task states
  MAINTAINERS: update PCMCIA tree
  pcmcia: use sysfs_emit{,_at} for sysfs output
  pcmcia: make pcmcia_release_io() void, as no-one is interested in return value
  pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
  pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
  pcmcia: comment out unused exca_readw() function
  pcmcia: Make use of the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS()
  pcmcia: clean up dead drivers for CompuLab CM-X255/CM-X270 boards

Pull gpio updates from Bartosz Golaszewski:
 "The gpio-sim module is back, this time without any changes to
  configfs. This results in a less elegant user-space interface but I
  never got any follow-up on the committable items and didn't want to
  delay this module for several more months.

  Other than that we have support for several new models and some
  support going away. We started working on converting GPIO drivers to
  using fwnode exclusively in order to limit references to OF symbols to
  gpiolib-of.c exclusively. We also have regular tweaks and improvements
  all over the place.

  Summary:

   - new testing module: gpio-sim that is scheduled to replace
     gpio-mockup

   - initial changes aiming at converting all GPIO drivers to using the
     fwnode interface and limiting any references to OF symbols to
     gpiolib-of.c

   - add support for Tegra234 and Tegra241 to gpio-tegra186

   - add support for new models (SSD201 and SSD202D) to gpio-msc313

   - add basic support for interrupts to gpio-aggregator

   - add support for AMDIF031 HID device to gpio-amdpt

   - drop support for unused platforms in gpio-xlp

   - cleanup leftovers from the removal of the legacy Samsung Exynos
     GPIO driver

   - use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
     PREEMPT_RT happy

   - generalize the common 'ngpios' device property by reading it in the
     core gpiolib code so that we can remove duplicate reads from
     drivers

   - allow line names from device properties to override names set by
     drivers

   - code shrink in gpiod_add_lookup_table()

   - add new model to the DT bindings for gpio-vf610

   - convert DT bindings for tegra devices to YAML

   - improvements to interrupt handling in gpio-rcar and gpio-rockchip

   - updates to intel drivers from Andy (details in the merge commit)

   - some minor tweaks, improvements and coding-style fixes all around
     the subsystem"

* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
  gpio: rcar: Propagate errors from devm_request_irq()
  gpio: rcar: Use platform_get_irq() to get the interrupt
  gpio: ts5500: Use platform_get_irq() to get the interrupt
  gpio: dwapb: Switch to use fwnode instead of of_node
  gpiolib: acpi: make fwnode take precedence in struct gpio_chip
  dt-bindings: gpio: samsung: drop unused bindings
  gpio: max3191x: Use bitmap_free() to free bitmap
  gpio: regmap: Switch to use fwnode instead of of_node
  gpio: tegra186: Add support for Tegra241
  dt-bindings: gpio: Add Tegra241 support
  gpio: brcmstb: Use local variable to access OF node
  gpio: Remove unused local OF node pointers
  gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
  gpio: msc313: Add support for SSD201 and SSD202D
  gpio: msc313: Code clean ups
  dt-bindings: gpio: msc313: Add offsets for ssd20xd
  dt-bindings: gpio: msc313: Add compatible for ssd20xd
  gpio: sim: fix uninitialized ret variable
  gpio: Propagate firmware node from a parent device
  gpio: Setup parent device and get rid of unnecessary of_node assignment
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Use common polling loop for CMD1
   - Add support for DT compatibles for card quirks and use it for ti,wl1251
   - Fixup storing of the OCR mask for MMC_QUIRK_NONSTD_SDIO

  MMC host:
   - dw_mmc: Add support for MMC_GEN_CMDs
   - dw_mmc: Fixup calculation of the data timeout
   - dw_mmc-exynos: Add support for the ARTPEC-8 variant
   - jz4740: Add support for bi-directional DMA channels
   - mmci: Add support for eMMC HS200 mode for the stm32 sdmmc variant
   - mmci: Add support for stm32 sdmmc variant revision v2.2
   - mtk-sd: A couple of various minor improvements
   - omap_hsmmc: Drop redundant initialization for the ti,wl1251 chip
   - sdhci-esdhc-imx: Add support for the i.MXRT series variant
   - sdhci-esdhc-imx: Add Haibo Chen as maintainer
   - sdhci-pci: Add support for the Intel ADL variant
   - sdhci-pci-gli: GL975[50]: Add support for the Apple ARM64 variant
   - sdhci-pci-o2micro: Improve support for SDR104/HS200"

* tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits)
  dt-bindings: mmc: synopsys-dw-mshc: integrate Altera and Imagination
  mmc: pwrseq: Use bitmap_free() to free bitmap
  dt-bindings: mmc: PL18x stop relying on order of dma-names
  dt-bindings: mmc: sdhci-msm: Add compatible string for msm8994
  mmc: au1xmmc: propagate errors from platform_get_irq()
  mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequency
  mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode
  mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs
  mmc: mtk-sd: Fix usage of devm_clk_get_optional()
  mmc: mtk-sd: Take action for no-sdio device-tree parameter
  mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields
  mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling
  MAINTAINERS: Add i.MX sdhci maintainer
  mmc: jz4740: Support using a bi-directional DMA channel
  dt-bindings: mmc: ingenic: Support using bi-directional DMA channel
  mmc: dw_mmc: Do not wait for DTO in case of error
  mmc: dw_mmc: Add driver callbacks for data read timeout
  mmc: dw_mmc-exynos: Add support for ARTPEC-8
  dt-bindings: mmc: exynos-dw-mshc: Add support for ARTPEC-8
  mmc: meson-mx-sdio: add IRQ check
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Prepare and add support for ACPI enumeration; lp855x_bl

  Fix-ups:
   - Use Regmap API to conduct endianess conversions; qcom-wled
   - Remove superfluous code; qcom-wled
   - Fix formatting issues; qcom-wled

  Bug Fixes:
   - Provide error checking/validation of DT supplied strings; qcom-wled
   - Request dynamic amount of values when reading from DT; qcom-wled
   - Fix off-by-one issue when reading from DT; qcom-wled"

* tag 'backlight-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: qcom-wled: Respect enabled-strings in set_brightness
  backlight: qcom-wled: Remove unnecessary double whitespace
  backlight: qcom-wled: Provide enabled_strings default for WLED 4 and 5
  backlight: qcom-wled: Remove unnecessary 4th default string in WLED3
  backlight: qcom-wled: Override default length with qcom,enabled-strings
  backlight: qcom-wled: Fix off-by-one maximum with default num_strings
  backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
  backlight: qcom-wled: Pass number of elements to read to read_u32_array
  backlight: qcom-wled: Validate enabled string indices in DT
  backlight: lp855x: Add support ACPI enumeration
  backlight: lp855x: Add dev helper variable to lp855x_probe()
  backlight: lp855x: Move device_config setting out of lp855x_configure()

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for Lakefield PCH to Intel LPSS PCI

  Remove Device Support:
   - Remove support for ROHM BD70528 Power Management IC

  New Functionality:
   - Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC
   - Enable I2C4 on Microsoft Surface Go & Go 2

  Fix-ups:
   - Device Tree changes (inc. YAML conversion); maxim,max77686,
     rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec
   - Use __maybe_unused instead of #ifery; atmel-flexcom
   - Allow the Regmap API to handle endianess internally; ntxec
   - Utilise I2C's .resume_noirq call-back; atmel-flexcom
   - Remove unused code; ti_am335x_tscadc
   - Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core
   - Allow device to power-off right from .probe(); tps65910
   - Trivial (whitespace, typos, etc); da9063

  Bug Fixes:
   - Fix ordering issues during probe; intel-lpss-acpi
   - Fix correct clock speed; intel-lpss-pci"

* tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
  mfd: google,cros-ec: Fix property name for MediaTek rpmsg
  dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
  mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16
  mfd: tps65910: Set PWR_OFF bit during driver probe
  mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants
  mfd: intel-lpss: Fix I2C4 not being available on the Microsoft Surface Go & Go 2
  dt-bindings: mfd: Add Broadcom's Timer-Watchdog block
  dt-bindings: mfd: Add Freecom system controller
  mfd: Kconfig: Change INTEL_SOC_PMIC_CHTDC_TI to bool
  dt-bindings: mfd: syscon: Add samsung,exynos850-sysreg
  mfd: da9062: Support SMBus and I2C mode
  mfd: intel-lpss-pci: Fix clock speed for 38a8 UART
  mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()
  mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macro
  mfd: stmpe: Support disabling sub-functions
  mfd: atmel-flexcom: Use .resume_noirq
  mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP
  dt-bindings: mfd: bd9571mwv: Convert to json-schema
  mfd: intel-lpss: Add Intel Lakefield PCH PCI IDs
  dt-bindings: mfd: maxim,max77686: Convert to dtschema
  ...

Pull spi updates from Mark Brown:
 "This has mostly been a quiet release for the SPI subsystem, almost all
  cleanups and fixes to existing drivers.

  A couple of changes that stand out:

   - Cleanups and support for version specific features in the
     DesignWare controller.

   - Removal of support for Netlogic devices from the XLP driver, the
     platform had previously been removed by MIPS so the support
     couldn't be used.

   - Conversion of several DT bindings to YAML format"

* tag 'spi-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (53 commits)
  spi: don't include ptp_clock_kernel.h in spi.h
  spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
  spi: atmel: Fix typo
  spi: dt-bindings: mediatek,spi-mtk-nor: Fix example 'interrupts' property
  spi: qcom: geni: handle timeout for gpi mode
  spi: qcom: geni: set the error code for gpi transfer
  spi: spi-mux: Add reference to spi-peripheral-props.yaml schema
  spi: ar934x: fix transfer size
  spi: pxa2xx: Propagate firmware node
  spi: dw: Propagate firmware node
  spi: dln2: Propagate firmware node
  spi: ar934x: fix transfer and word delays
  spi: uniphier: Fix a bug that doesn't point to private data correctly
  spi: spi-mtk-nor: add new clock name 'axi' for spi nor
  spi: atmel,quadspi: Define sama7g5 QSPI
  spi: atmel,quadspi: Convert to json-schema
  spi: Fix incorrect cs_setup delay handling
  dt-bindings: mtd: spi-nor: Add a reference to spi-peripheral-props.yaml
  spi: dt-bindings: cdns,qspi-nor: Move peripheral-specific properties out
  spi: dt-bindings: add schema listing peripheral-specific properties
  ...

Pull regulator updates from Mark Brown:
 "This has been a fairly quiet release for the regulator API, the main
  thing has been the addition of helpers for interrupt handling from
  Matti Vaittinen.

  We do also have support for quite a few new devices.

  Summary:

   - Helpers for trivial interrupt notifications, making it easier for
     drivers to handle error interrupts.

   - Support for Dialog DA914x, Maxim MAX2008x, Qualcomm PM8826,
     PMG1100, and PM8450 and TI TPS68470"

* tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (30 commits)
  regulator: Add MAX20086-MAX20089 driver
  dt-bindings: regulators: Add bindings for Maxim MAX20086-MAX20089
  regulator: qcom_smd: Align probe function with rpmh-regulator
  regulator: remove redundant ret variable
  regulator: qcom-labibb: OCP interrupts are not a failure while disabled
  regulator: dt-bindings: samsung,s5m8767: Move fixed string BUCK9 to 'properties'
  regulator: Introduce tps68470-regulator driver
  drivers/regulator: remove redundant ret variable
  regulator: fix bullet lists of regulator_ops comment
  regulator: Fix type of regulator-coupled-max-spread property
  regulator: maxim,max8973: Document interrupts property
  regulator: qcom-rpmh: Add support for PM8450 regulators
  regulator: qcom,rpmh: Add compatible for PM8450
  regulator: da9121: Add DA914x binding info
  regulator: da9121: Remove erroneous compatible from binding
  regulator: da9121: Add DA914x support
  regulator: da9121: Prevent current limit change when enabled
  regulator: qcom-rpmh: Add PMG1110 regulators
  dt-bindings: regulator: Add compatible for pmg1110
  regulator: qcom_spmi: Add pm8226 regulators
  ...

Pull regmap updates from Mark Brown:
 "A very quiet release for regmap:

   - Allow a custom _update_bits() operation for devices with no bus.

   - Fix an issue with creation of the debugfs directory when attaching
     a device to an existing no device regmap.

   - A trivial formatting fix"

[ The custom _update_bits comit came in earlier through the networking
  tree that had merged it for its own needs ]

* tag 'regmap-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Fix indentation
  regmap: Call regmap_debugfs_exit() prior to _init()

Pull MTD updates from Miquel Raynal:
 "MTD core changes:

   - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl

   - gen_probe: Use bitmap_zalloc() when applicable

   - Introduce an expert mode for forensics and debugging purposes

   - Clear out unregistered devices a bit more

   - Provide unique name for nvmem device

   - Remove unused header file <linux/mtd/latch-addr-flash.h>

   - Fixed breaking list in __mtd_del_partition.

  MTD device changes:

   - Warn about failure to unregister mtd device in sst25l, mchp48l640,
     mchp23k256, and dataflash drivers.

  Raw NAND core changes:

   - Export nand_read_page_hwecc_oob_first()

  GPMC memory controller for OMAP2 NAND controller changes:

   - Add support for AM64 SoC and allow build on K3 platforms

   - Use a compatible match table when checking for NAND controller

   - Use platform_get_irq() to get the interrupt

  Raw NAND controller changes:

   - OMAP2 NAND controller:
      - Document the missing 'rb-gpios' DT property
      - Drop unused variable
      - Fix force_8bit flag behaviour for DMA mode
      - Move to exec_op interface
      - Use platform_get_irq() to get the interrupt

   - Renesas:
      - Add new NAND controller driver with its bindings and MAINTAINERS entry

   - Onenand:
      - Remove redundant variable ooblen

   - MPC5121:
      - Remove unused variable in ads5121_select_chip()

   - GPMI:
      - Add ERR007117 protection for nfc_apply_timings
      - Remove explicit default gpmi clock setting for i.MX6
      - Use platform_get_irq_byname() to get the interrupt
      - Remove unneeded variable

   - Ingenic:
      - JZ4740 needs 'oob_first' read page function

   - Davinci:
      - Rewrite function description
      - Avoid duplicated page read
      - Don't calculate ECC when reading page

  SPI NOR core changes:

   - Add Pratyush as SPI NOR co-maintainer.

   - Flash parameters initialization was done in a spaghetti way. Clean
     flash parameters initialization.

   - Rework the flash_info flags and clarify where one should be used.

   - Initialize all flash parameters based on JESD216 SFDP where
     possible. Flash parameters and settings that are SFDP discoverable
     should not be duplicated via flash_info flags at flash declaration.

   - Remove debugfs entries that duplicate sysfs entries.

  SPI NOR manufacturer driver changes:

   - Use late_init() hook in various drivers to make it clear that those
     flash parameters are either not declared in the JESD216 SFDP
     standard, or the SFDP tables which define those flash parameters
     are not defined by the flash.

   - Fix mtd size for s3an flashes.

   - Write 2 bytes when disabling Octal DTR mode: 1 byte long
     transactions are not allowed in 8D-8D-8D mode.

  Hyperbus changes:

   - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on
     module remove and for missing check for error value in probe"

* tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits)
  mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries
  mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode
  mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode
  mtd: spi-nor: core: use 2 data bytes for template ops
  mtd: spi-nor: Constify part specific fixup hooks
  mtd: spi-nor: core: Remove reference to spi-nor.c
  mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt
  mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt
  mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3
  memory: omap-gpmc: Use a compatible match table when checking for NAND controller
  memory: omap-gpmc: Add support for GPMC on AM64 SoC
  dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64
  memory: omap-gpmc: Use platform_get_irq() to get the interrupt
  MAINTAINERS: Add an entry for Renesas NAND controller
  mtd: rawnand: renesas: Add new NAND controller driver
  dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
  mtd: rawnand: gpmi: remove unneeded variable
  mtd: rawnand: omap2: drop unused variable
  mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode
  mtd: rawnand: omap2: Add compatible for AM64 SoC
  ...

Merge tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

  New drivers:
   - asus-tf103c-dock
   - intel_crystal_cove_charger
   - lenovo-yogabook-wmi
   - simatic-ipc platform-code + led driver + watchdog driver
   - x86-android-tablets (kernel module to workaround DSDT bugs on
     these)

  amd-pmc:
   - bug-fixes
   - smar trace buffer support

  asus-wmi:
   - support for custom fan curves

  int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
   - ACPI core + int3472 changes to delay enumeration of camera sensor
     I2C clients until the PMIC for the sensor has been fully probed
   - Add support for board data (DSDT info is incomplete) for setting up
     the tps68470 PMIC used on some boards with these cameras
   - Add board data for the Microsoft Surface Go (original, v2 and v3)

  thinkpad_acpi:
   - various cleanups
   - support for forced battery discharging (for battery calibration)
   - support to inhibit battery charging
   - this includes power_supply core changes to add new APIs for this

  think_lmi:
   - enhanced BIOS password support

  various other small fixes and hardware-id additions"

* tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (78 commits)
  power: supply: Provide stubs for charge_behaviour helpers
  platform/x86: x86-android-tablets: Fix GPIO lookup leak on error-exit
  platform/x86: int3472: Add board data for Surface Go 3
  platform/x86: Add Asus TF103C dock driver
  platform/x86: x86-android-tablets: Add TM800A550L data
  platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
  platform/x86: x86-android-tablets: Add Asus TF103C data
  platform/x86: x86-android-tablets: Add support for preloading modules
  platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
  platform/x86: x86-android-tablets: Add support for instantiating serdevs
  platform/x86: x86-android-tablets: Add support for instantiating platform-devs
  platform/x86: x86-android-tablets: Add support for PMIC interrupts
  platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
  platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry
  platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro
  platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
  platform/x86: Add intel_crystal_cove_charger driver
  power: supply: fix charge_behaviour attribute initialization
  platform/x86: intel-uncore-frequency: use default_groups in kobj_type
  x86/platform/uv: use default_groups in kobj_type
  ...

Pull HSI update from Sebastian Reichel:

 - avoid returning free'd object in hsi_new_client error path

* tag 'hsi-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: core: Fix return freed object in hsi_new_client

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:

   - introduce "No Battery" health status

   - use library interpolation

   - add power_supply_battery_info documentation

   - migrate power_supply_battery_info to be fully heap allocated making
     it more obvious that it needs to be free'd manually

  Drivers:

   - max77976-charger: new driver

   - qcom-smbb: add pm8226 charger support

   - bq25890-charger: support battery temperature readings

   - ab8500: continue migrating towards using standard core APIs"

* tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply_core: Pass pointer to battery info
  power: supply: ab8500: Fix the error handling path of ab8500_charger_probe()
  power: reset: mt6397: Check for null res pointer
  power: bq25890: add POWER_SUPPLY_PROP_TEMP
  power: supply: qcom_smbb: support pm8226
  dt-bindings: power: supply: pm8941-charger: add pm8226
  power: supply: ab8500: Standardize capacity lookup
  power: supply: ab8500: Standardize temp res lookup
  power: supply: ab8500: Standardize CV voltage
  power: supply: ab8500: Standardize CC current
  power: supply: ab8500: Make recharge capacity a constant
  power: supply: ab8500: Standardize termination current
  power: supply: ab8500: Standardize internal resistance
  power: supply: ab8500_fg: Init battery data in bind()
  power: supply: ab8500: Standardize voltages
  power: supply: ab8500: Standardize technology
  power: supply: ab8500: Standardize design capacity
  power: supply: ab8500: Use only one battery type
  power: supply: ab8500: Drop unused battery types
  power: supply: ab8500: Standardize operating temperature
  ...

Pull trivial tree removal from Jiri Kosina:
 "Remove any mentions of trivial tree from the documentation and
  MAINTAINERS.

  This has been discussed on ksummit-discuss@ some time ago (link is
  provided in the commit message, together with the reasoning). It's a
  general agreement that reason for such a tree to exist is currently
  pretty much non-existent"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  Documentation: remove trivial tree

Pull HID updates from Jiri Kosina:
 "Highlights:

   - support for USI style pens (Tero Kristo, Mika Westerberg)

   - quirk for devices that need inverted X/Y axes (Alistair Francis)

   - small core code cleanups and deduplication (Benjamin Tissoires)

   - Apple Magic Keyboard support improvements (José Expósito, Alex
     Henrie, Benjamin Berg)

   - locking performance improvement for hidraw code (André Almeida)

   - PM wakeup support for i2c-hid driver (Matthias Kaehlcke

   - new driver to support for LetSketch device (Hans de Goede)

   - proper batter reporting for hid-magicmouse USB-connected devices
     (José Expósito)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (32 commits)
  HID: magicmouse: Fix an error handling path in magicmouse_probe()
  HID: address kernel-doc warnings
  HID: intel-ish-hid: ishtp-fw-loader: Fix a kernel-doc formatting issue
  HID: intel-ish-hid: ipc: Specify no cache snooping on TGL and ADL
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init
  HID: Add new Letsketch tablet driver
  HID: apple: Add Magic Keyboard 2021 with fingerprint reader FN key mapping
  HID: apple: Add 2021 magic keyboard FN key mapping
  HID: magicmouse: set Magic Trackpad 2021 name
  HID: magicmouse: set device name when it has been personalized
  HID: apple: Add 2021 Magic Keyboard with number pad
  HID: apple: Add 2021 Magic Keyboard with fingerprint reader
  HID: i2c-hid-of: Expose the touchscreen-inverted properties
  HID: quirks: Allow inverting the absolute X/Y values
  HID: hidraw: Replace hidraw device table mutex with a rwsem
  HID: thrustmaster use swap() to make code cleaner
  HID: debug: Add USI usages
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - PMBus driver for MPS Multi-phase mp5023

   - PMBus driver for Delta AHE-50DC fan control module

   - Driver for NZXT RGB&Fan Controller/Smart Device v2

   - Driver for Texas Instruments INA238

   - Driver to support X370 Asus WMI

   - Driver to support B550 Asus WMI

  Other notable changes:

   - Cleanup of ntc_thermistor driver, and added support for Samsung
     1404-001221 NTC

   - Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver

   - Clean up tmp401 driver, and convert to with_info API

   - Add support for regulators and IR38060, IR38164 IR38263 to ir38064
     PMBus driver

   - Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to
     k10temp driver

   - Add support for F81966 to f71882fg driver

   - Add support for ONSEMI N34TS04 to jc42 driver

   - Clean up and simplify dell-smm driver

   - Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver

  And various other minor improvements and fixes"

* tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (nzxt-smart2) make array detect_fans_report static const
  hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe
  hwmon: (nzxt-smart2) Fix "unused function" warning
  hwmon: (dell-smm) Pack the whole smm_regs struct
  hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
  hwmon: (mr75203) fix wrong power-up delay value
  hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"
  hwmon/pmbus: (ir38064) Expose a regulator
  hwmon/pmbus: (ir38064) Add of_match_table
  hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263
  hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
  hwmon: (pmbus) Add support for MPS Multi-phase mp5023
  dt-bindings: add Delta AHE-50DC fan control module
  hwmon: (pmbus) Add Delta AHE-50DC fan control module driver
  hwmon: prefix kernel-doc comments for structs with struct
  hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC
  hwmon: (ntc_thermistor) Drop OF dependency
  hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()
  hwmon: (dell-smm) Simplify ioctl handler
  ...

Pull crypto updates from Herbert Xu:
 "Algorithms:

   - Drop alignment requirement for data in aesni

   - Use synchronous seeding from the /dev/random in DRBG

   - Reseed nopr DRBGs every 5 minutes from /dev/random

   - Add KDF algorithms currently used by security/DH

   - Fix lack of entropy on some AMD CPUs with jitter RNG

  Drivers:

   - Add support for the D1 variant in sun8i-ce

   - Add SEV_INIT_EX support in ccp

   - PFVF support for GEN4 host driver in qat

   - Compression support for GEN4 devices in qat

   - Add cn10k random number generator support"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
  crypto: af_alg - rewrite NULL pointer check
  lib/mpi: Add the return value check of kcalloc()
  crypto: qat - fix definition of ring reset results
  crypto: hisilicon - cleanup warning in qm_get_qos_value()
  crypto: kdf - select SHA-256 required for self-test
  crypto: x86/aesni - don't require alignment of data
  crypto: ccp - remove unneeded semicolon
  crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
  crypto: s390/sha512 - Use macros instead of direct IV numbers
  crypto: sparc/sha - remove duplicate hash init function
  crypto: powerpc/sha - remove duplicate hash init function
  crypto: mips/sha - remove duplicate hash init function
  crypto: sha256 - remove duplicate generic hash init function
  crypto: jitter - add oversampling of noise source
  MAINTAINERS: update SEC2 driver maintainers list
  crypto: ux500 - Use platform_get_irq() to get the interrupt
  crypto: hisilicon/qm - disable qm clock-gating
  crypto: omap-aes - Fix broken pm_runtime_and_get() usage
  MAINTAINERS: update caam crypto driver maintainers list
  crypto: octeontx2 - prevent underflow in get_cores_bmap()
  ...

Pull documentation updates from Jonathan Corbet:
 "This isn't a hugely busy cycle for documentation, but a few
  significant things still showed up:

   - A documentation section for ARC processors

   - Reworked and enhanced KUnit documentation

   - The ability to pick your own theme for HTML builds; if the default
     "Read the Docs" theme isn't ugly enough for you, you can now pick
     an uglier one.

   - More Chinese translation work

  Plus the usual assortment of fixes and cleanups"

* tag 'docs-5.17' of git://git.lwn.net/linux: (53 commits)
  scripts: sphinx-pre-install: Fix ctex support on Debian
  docs: discourage use of list tables
  docs: 5.Posting.rst: describe Fixes: and Link: tags
  Documentation: kgdb: Replace deprecated remotebaud
  docs: automarkup.py: Fix invalid HTML link output and broken URI fragments
  Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
  Documentation: kgdb: properly capitalize the MAGIC_SYSRQ config
  docs/zh_CN: Update and fix a couple of typos
  scripts: sphinx-pre-install: add required ctex dependency
  Documentation: KUnit: Restyled Frequently Asked Questions
  Documentation: KUnit: Restyle Test Style and Nomenclature page
  Documentation: KUnit: Rework writing page to focus on writing tests
  Documentation: kunit: Reorganize documentation related to running tests
  Documentation: KUnit: Added KUnit Architecture
  Documentation: KUnit: Rewrite getting started
  Documentation: KUnit: Rewrite main page
  docs/zh_CN: Add zh_CN/accounting/delay-accounting.rst
  Documentation/sphinx: fix typos of "its"
  docs/zh_CN: Add sched-domains translation
  doc: fs: remove bdev_try_to_free_page related doc
  ...

Pull KCSAN updates from Paul McKenney:
 "This provides KCSAN fixes and also the ability to take memory barriers
  into account for weakly-ordered systems. This last can increase the
  probability of detecting certain types of data races"

* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
  kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
  kcsan: Avoid nested contexts reading inconsistent reorder_access
  kcsan: Turn barrier instrumentation into macros
  kcsan: Make barrier tests compatible with lockdep
  kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
  compiler_attributes.h: Add __disable_sanitizer_instrumentation
  objtool, kcsan: Remove memory barrier instrumentation from noinstr
  objtool, kcsan: Add memory barrier instrumentation to whitelist
  sched, kcsan: Enable memory barrier instrumentation
  mm, kcsan: Enable barrier instrumentation
  x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
  x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
  asm-generic/bitops, kcsan: Add instrumentation for barriers
  locking/atomics, kcsan: Add instrumentation for barriers
  locking/barriers, kcsan: Support generic instrumentation
  locking/barriers, kcsan: Add instrumentation for barriers
  kcsan: selftest: Add test case to check memory barrier instrumentation
  kcsan: Ignore GCC 11+ warnings about TSan runtime support
  kcsan: test: Add test cases for memory barrier instrumentation
  kcsan: test: Match reordered or normal accesses
  ...

Pull memory model documentation updates from Paul McKenney:
 "This series contains documentation and litmus tests for locking,
  courtesy of Boqun Feng"

* tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/memory-model: litmus: Add two tests for unlock(A)+lock(B) ordering
  tools/memory-model: doc: Describe the requirement of the litmus-tests directory
  tools/memory-model: Provide extra ordering for unlock+lock pair on the same CPU

Pull RCU updates from Paul McKenney:

 - Documentation updates, perhaps most notably Neil Brown's writeup of
   the reference-counting analogy to RCU.

 - Expedited grace-period cleanups.

 - Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid users. I have asked
   around, posted a blog entry, and sent this series to LKML without
   result.

 - Miscellaneous fixes.

 - RCU callback offloading updates, perhaps most notably Frederic
   Weisbecker's updates allowing CPUs booted in the de-offloaded state
   to be offloaded at runtime.

 - nolibc fixes from Willy Tarreau and Anmar Faizi, but also including
   Mark Brown's addition of gettid().

 - RCU Tasks Trace fixes, including changes that increase the
   scalability of call_rcu_tasks_trace() for the BPF folks (Martin Lau
   and KP Singh).

 - Various fixes including those from Wander Lairson Costa and Li
   Zhijian.

 - Fixes plus addition of tests for the increased call_rcu_tasks_trace()
   scalability.

* tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (87 commits)
  rcu/nocb: Merge rcu_spawn_cpu_nocb_kthread() and rcu_spawn_one_nocb_kthread()
  rcu/nocb: Allow empty "rcu_nocbs" kernel parameter
  rcu/nocb: Create kthreads on all CPUs if "rcu_nocbs=" or "nohz_full=" are passed
  rcu/nocb: Optimize kthreads and rdp initialization
  rcu/nocb: Prepare nocb_cb_wait() to start with a non-offloaded rdp
  rcu/nocb: Remove rcu_node structure from nocb list when de-offloaded
  rcu-tasks: Use fewer callbacks queues if callback flood ends
  rcu-tasks: Use separate ->percpu_dequeue_lim for callback dequeueing
  rcu-tasks: Use more callback queues if contention encountered
  rcu-tasks: Avoid raw-spinlocked wakeups from call_rcu_tasks_generic()
  rcu-tasks: Count trylocks to estimate call_rcu_tasks() contention
  rcu-tasks: Add rcupdate.rcu_task_enqueue_lim to set initial queueing
  rcu-tasks: Make rcu_barrier_tasks*() handle multiple callback queues
  rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations
  rcu-tasks: Abstract invocations of callbacks
  rcu-tasks: Abstract checking of callback lists
  rcu-tasks: Add a ->percpu_enqueue_lim to the rcu_tasks structure
  rcu-tasks: Inspect stalled task's trc state in locked state
  rcu-tasks: Use spin_lock_rcu_node() and friends
  rcutorture: Combine n_max_cbs from all kthreads in a callback flood
  ...

Pull printk updates from Petr Mladek:

 - Remove some twists in the console registration code. It does not
   change the existing behavior except for one corner case. The proper
   default console (with tty binding) will be registered again even when
   it has been removed in the meantime. It is actually a bug fix.
   Anyway, this modified behavior requires some manual interaction.

 - Optimize gdb extension for huge ring buffers.

 - Do not use atomic operations for a local bitmap variable.

 - Update git links in MAINTAINERS.

* tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  MAINTAIERS/printk: Add link to printk git
  MAINTAINERS/vsprintf: Update link to printk git tree
  scripts/gdb: lx-dmesg: read records individually
  printk/console: Clean up boot console handling in register_console()
  printk/console: Remove need_default_console variable
  printk/console: Remove unnecessary need_default_console manipulation
  printk/console: Rename has_preferred_console to need_default_console
  printk/console: Split out code that enables default console
  vsprintf: Use non-atomic bitmap API when applicable

Pull workqueue updates from Tejun Heo:

 - The code around workqueue scheduler hooks got reorganized early 2019
   which unfortuately introdued a couple subtle and rare race conditions
   where preemption can mangle internal workqueue state triggering a
   WARN and possibly causing a stall or at least delay in execution.

   Frederic fixed both early December and the fixes were sitting in
   for-5.16-fixes which I forgot to push. They are here now. I'll
   forward them to stable after they land.

 - The scheduler hook reorganization has more implicatoins for workqueue
   code in that the hooks are now more strictly synchronized and thus
   the interacting operations can become more straight-forward.

   Lai is in the process of simplifying workqueue code and this pull
   request contains some of the patches.

* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Remove the cacheline_aligned for nr_running
  workqueue: Move the code of waking a worker up in unbind_workers()
  workqueue: Remove schedule() in unbind_workers()
  workqueue: Remove outdated comment about exceptional workers in unbind_workers()
  workqueue: Remove the advanced kicking of the idle workers in rebind_workers()
  workqueue: Remove the outdated comment before wq_worker_sleeping()
  workqueue: Fix unbind_workers() VS wq_worker_sleeping() race
  workqueue: Fix unbind_workers() VS wq_worker_running() race
  workqueue: Upgrade queue_work_on() comment

Pull cgroup updates from Tejun Heo:
 "Nothing too interesting. The only two noticeable changes are a subtle
  cpuset behavior fix and trace event id field being expanded to u64
  from int. Most others are code cleanups"

* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: convert 'allowed' in __cpuset_node_allowed() to be boolean
  cgroup/rstat: check updated_next only for root
  cgroup: rstat: explicitly put loop variant in while
  cgroup: return early if it is already on preloaded list
  cgroup/cpuset: Don't let child cpusets restrict parent in default hierarchy
  cgroup: Trace event cgroup id fields should be u64
  cgroup: fix a typo in comment
  cgroup: get the wrong css for css_alloc() during cgroup_init_subsys()
  cgroup: rstat: Mark benign data race to silence KCSAN

A task can end up indefinitely sleeping in do_select() ->
poll_schedule_timeout() when the following race happens:

  TASK1 (thread1)             TASK2                   TASK1 (thread2)
  do_select()
    setup poll_wqueues table
    with 'fd'
                              write data to 'fd'
                                pollwake()
                                  table->triggered = 1
                                                      closes 'fd' thread1 is
                                                        waiting for
    poll_schedule_timeout()
      - sees table->triggered
      table->triggered = 0
      return -EINTR
    loop back in do_select()

But at this point when TASK1 loops back, the fdget() in the setup of
poll_wqueues fails.  So now so we never find 'fd' is ready for reading
and sleep in poll_schedule_timeout() indefinitely.

Treat an fd that got closed as a fd on which some event happened.  This
makes sure cannot block indefinitely in do_select().

Another option would be to return -EBADF in this case but that has a
potential of subtly breaking applications that excercise this behavior
and it happens to work for them.  So returning fd as active seems like a
safer choice.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull device properties framework updates from Rafael Wysocki:
 "These update the handling of software nodes and graph properties, and
  the MAINTAINERS entry for the former.

  Specifics:

   - Remove device_add_properties() which does not work correctly if
     software nodes holding additional device properties are shared or
     reused (Heikki Krogerus).

   - Fix nargs_prop property handling for software nodes (Clément
     Léger).

   - Update documentation of ACPI device properties (Sakari Ailus).

   - Update the handling of graph properties in the generic framework to
     match the DT case (Sakari Ailus).

   - Update software nodes entry in MAINTAINERS (Andy Shevchenko)"

* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Update MAINTAINERS data base
  software node: fix wrong node passed to find nargs_prop
  device property: Drop fwnode_graph_get_remote_node()
  device property: Use fwnode_graph_for_each_endpoint() macro
  device property: Implement fwnode_graph_get_endpoint_count()
  Documentation: ACPI: Update references
  Documentation: ACPI: Fix data node reference documentation
  device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
  device property: Fix fwnode_graph_devcon_match() fwnode leak
  device property: Remove device_add_properties() API
  driver core: Don't call device_remove_properties() from device_del()
  PCI: Convert to device_create_managed_software_node()

Pull thermal control updates from Rafael Wysocki:
 "These add a new driver for Renesas RZ/G2L TSU, update a few existing
  thermal control drivers and clean up the tmon utility.

  Specifics:

   - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
     (Biju Das).

   - Fix missing check when calling reset_control_deassert() in the
     rz2gl thermal driver (Biju Das).

   - In preparation for FORTIFY_SOURCE performing compile-time and
     run-time field bounds checking for memcpy(), avoid intentionally
     writing across neighboring fields in the int340x thermal control
     driver (Kees Cook).

   - Fix RFIM mailbox write commands handling in the int340x thermal
     control driver (Sumeet Pawnikar).

   - Fix PM issue occurring in the iMX thermal control driver during
     suspend/resume by implementing PM runtime support in it (Oleksij
     Rempel).

   - Add 'const' annotation to thermal_cooling_ops in the Intel
     powerclamp driver (Rikard Falkeborn).

   - Fix missing ADC bit set in the iMX8MP thermal driver to enable the
     sensor (Paul Gerber).

   - Drop unused local variable definition from tmon (ran jianping)"

* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/int340x: Fix RFIM mailbox write commands
  thermal/drivers/rz2gl: Add error check for reset_control_deassert()
  thermal/drivers/imx8mm: Enable ADC when enabling monitor
  thermal/drivers: Add TSU driver for RZ/G2L
  dt-bindings: thermal: Document Renesas RZ/G2L TSU
  thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
  thermal/drivers/imx: Implement runtime PM support
  thermal: tools: tmon: remove unneeded local variable
  thermal: int340x: Use struct_group() for memcpy() region

Pull power management updates from Rafael Wysocki:
 "The most signigicant change here is the addition of a new cpufreq
  'P-state' driver for AMD processors as a better replacement for the
  venerable acpi-cpufreq driver.

  There are also other cpufreq updates (in the core, intel_pstate, ARM
  drivers), PM core updates (mostly related to adding new macros for
  declaring PM operations which should make the lives of driver
  developers somewhat easier), and a bunch of assorted fixes and
  cleanups.

  Summary:

   - Add new P-state driver for AMD processors (Huang Rui).

   - Fix initialization of min and max frequency QoS requests in the
     cpufreq core (Rafael Wysocki).

   - Fix EPP handling on Alder Lake in intel_pstate (Srinivas
     Pandruvada).

   - Make intel_pstate update cpuinfo.max_freq when notified of HWP
     capabilities changes and drop a redundant function call from that
     driver (Rafael Wysocki).

   - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
     Stephen Boyd, Vladimir Zapolskiy).

   - Fix double devm_remap() in the Mediatek cpufreq driver (Hector
     Yuan).

   - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
     Luba).

   - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

   - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).

   - Fix two comments in cpuidle code (Jason Wang, Yang Li).

   - Allow model-specific normal EPB value to be used in the intel_epb
     sysfs attribute handling code (Srinivas Pandruvada).

   - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).

   - Add safety net to supplier device release in the runtime PM core
     code (Rafael Wysocki).

   - Capture device status before disabling runtime PM for it (Rafael
     Wysocki).

   - Add new macros for declaring PM operations to allow drivers to
     avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
     update some drivers to use these macros (Paul Cercueil).

   - Allow ACPI hardware signature to be honoured during restore from
     hibernation (David Woodhouse).

   - Update outdated operating performance points (OPP) documentation
     (Tang Yizhou).

   - Reduce log severity for informative message regarding frequency
     transition failures in devfreq (Tzung-Bi Shih).

   - Add DRAM frequency controller devfreq driver for Allwinner sunXi
     SoCs (Samuel Holland).

   - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
     Bergmann).

   - Add support for new layout of Psys PowerLimit Register on SPR to
     the Intel RAPL power capping driver (Zhang Rui).

   - Fix typo in a comment in idle_inject.c (Jason Wang).

   - Remove unused function definition from the DTPM (Dynamit Thermal
     Power Management) power capping framework (Daniel Lezcano).

   - Reduce DTPM trace verbosity (Daniel Lezcano)"

* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  cpuidle: use default_groups in kobj_type
  x86: intel_epb: Allow model specific normal EPB value
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  ...

Pull ACPI updates from Rafael Wysocki:
 "These are usual ACPICA code updates (although there are more of them
  than in the last few releases), a noticeable EC driver update (which
  mostly consists of cleanups, though), the device enumeration quirks
  handling rework from Hans, some updates eliminating unnecessary CPU
  cache flushing in some places (processor idle and system-wide PM code)
  and a bunch of assorted cleanups and fixes.

  Specifics:

   - Update ACPICA code in the kernel to the 20211217 upstream release
     including the following changes:

      - iASL/Disassembler: Additional support for NHLT table (Bob
        Moore).
      - Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
      - Fix a couple of warnings under MSVC (Bob Moore).
      - iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
      - iASL/NHLT table: "Specific Data" field support (Bob Moore).
      - Use original data_table_region pointer for accesses (Jessica
        Clarke).
      - Use original pointer for virtual origin tables (Jessica Clarke).
      - Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
      - Avoid subobject buffer overflow when validating RSDP signature
        (Jessica Clarke).
      - iASL: Add suppport for AGDI table (Ilkka Koskinen).
      - Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
        A. Shutemov).
      - Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
      - Utilities: Avoid deleting the same object twice in a row (Rafael
        Wysocki).
      - Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
        (Rafael Wysocki).
      - Fix AEST Processor generic resource substructure data field byte
        length (Shuuichirou Ishii).
      - Fix wrong interpretation of PCC address (Sudeep Holla).
      - Add support for PCC Opregion special context data (Sudeep
        Holla).

   - Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
     Holla).

   - Introduce acpi_fetch_acpi_dev() as a replacement for
     acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
     Wysocki).

   - Avoid using _CID for device enumaration if _HID is missing or
     invalid (Rafael Wysocki).

   - Rework quirk handling during ACPI device enumeration and add some
     new quirks for known broken platforms (Hans de Goede).

   - Avoid unnecessary or redundant CPU cache flushing during system PM
     transitions (Kirill A. Shutemov).

   - Add PM debug messages related to power resources (Rafael Wysocki).

   - Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang
     Li).

   - Rework flushing of EC work while suspended to idle and clean up the
     handling of events in the ACPI EC driver (Rafael Wysocki).

   - Prohibit ec_sys module parameter write_support from being used when
     the system is locked down (Hans de Goede).

   - Make the ACPI processor thermal driver use cpufreq_cpu_get() to
     check for presence of cpufreq policy (Manfred Spraul).

   - Avoid unnecessary CPU cache flushing in the ACPI processor idle
     driver (Kirill A. Shutemov).

   - Replace kernel.h with the necessary inclusions in the ACPI
     processor driver (Andy Shevchenko).

   - Use swap() instead of open coding it in the ACPI processor idle
     driver (Guo Zhengkui).

   - Fix the handling of defective LPAT in the ACPI xpower PMIC driver
     and clean up some definitions of PMIC data structures (Hans de
     Goede).

   - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).

   - Add AEST to the list of known ACPI table signatures (Shuuichirou
     Ishii).

   - Make ACPI NUMA code take hotpluggable memblocks into account when
     CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).

   - Use default_groups in kobj_type in the ACPI sysfs code (Greg
     Kroah-Hartman).

   - Rearrange _CPC structure documentation (Andy Shevchenko).

   - Drop an always true check from the ACPI thermal driver (Adam
     Borowski).

   - Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
     battery driver (Thomas Weißschuh)"

* tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype
  ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
  ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
  ACPI: processor: thermal: avoid cpufreq_get_policy()
  serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
  i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
  PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
  ACPI: battery: Add the ThinkPad "Not Charging" quirk
  ACPI: sysfs: use default_groups in kobj_type
  ACPICA: Update version to 20211217
  ACPICA: iASL/NHLT table: "Specific Data" field support
  ACPICA: iASL: Add suppport for AGDI table
  ACPICA: iASL: Add TDEL table to both compiler/disassembler
  ACPICA: Fixed a couple of warnings under MSVC
  ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)
  ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
  ACPICA: Add support for PCC Opregion special context data
  ACPICA: Fix wrong interpretation of PCC address
  ...

Commit 2c865a8a ("netfilter: nf_tables: add rule blob layout") never
initialized the new 'data_size' variable.

I'm not sure how it ever worked, but it might have worked almost by
accident - gcc seems to occasionally miss these kinds of 'variable used
uninitialized' situations, but I've seen it do so because it ended up
zero-initializing them due to some other simplification.

But clang is very unhappy about it all, and correctly reports

    net/netfilter/nf_tables_api.c:8278:4: error: variable 'data_size' is uninitialized when used here [-Werror,-Wuninitialized]
                            data_size += sizeof(*prule) + rule->dlen;
                            ^~~~~~~~~
    net/netfilter/nf_tables_api.c:8263:30: note: initialize the variable 'data_size' to silence this warning
            unsigned int size, data_size;
                                        ^
                                         = 0
    1 error generated.

and this fix just initializes 'data_size' to zero before the loop.

Fixes: 2c865a8a ("netfilter: nf_tables: add rule blob layout")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: ov5693

 - A new driver for STM32 Chrom-ART Accelerator

 - Added V4L2 core helper functions for VP9 codec

 - Hantro driver has gained support for VP9 codecs

 - Added support for Maxim MAX96712 Quad GMSL2 Deserializer

 - The staging atomisp driver has gained lots of improvements, fixes and
   cleanups. It now works with userptr

 - Lots of random driver improvements as usual

* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
  media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
  media: ipu3-cio2: Call cio2_bridge_init() before anything else
  media: ipu3-cio2: Defer probing until the PMIC is fully setup
  media: hantro: Add support for Allwinner H6
  media: dt-bindings: allwinner: document H6 Hantro G2 binding
  media: hantro: Convert imx8m_vpu_g2_irq to helper
  media: hantro: move postproc enablement for old cores
  media: hantro: vp9: add support for legacy register set
  media: hantro: vp9: use double buffering if needed
  media: hantro: add support for reset lines
  media: hantro: Fix probe func error path
  media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
  media: i2c: hi846: check return value of regulator_bulk_disable()
  media: hi556: Support device probe in non-zero ACPI D state
  media: ov5675: Support device probe in non-zero ACPI D state
  media: imx208: Support device probe in non-zero ACPI D state
  media: ov2740: support device probe in non-zero ACPI D state
  media: ov5670: Support device probe in non-zero ACPI D state
  media: ov8856: support device probe in non-zero ACPI D state
  media: ov8865: Disable only enabled regulators on error path
  ...