- 23 May, 2014 9 commits
-
-
Stefan Agner authored
Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Thomas Petazzoni authored
The Marvell Armada 38x platform has a SDHCI interface managed by the sdhci-pxav3 MMC host driver. It therefore makes sense to enable this driver in multi_v7_defconfig, which supports the Armada 38x platform. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Gregory CLEMENT authored
The Marvell Armada 38x platform needs the xhci_mvebu driver enabled for the xHCI USB hosts, so this commit enables the corresponding Kconfig option in multi_v7_defconfig. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: arm@kernel.org Cc: Kevin Hilman <khilman@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
These are from the next/boards branch, and we decided to split out the defconfig changes now. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'qcom-defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/defconfig Merge "Qualcomm ARM Based defconfig Updates for v3.16" from Kumar Gala: * Add a new qcom_defconfig for mach-qcom * Update msm_defconfig for handling building the old mach-msm * tag 'qcom-defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: config: Update msm_defconfig ARM: config: Add qcom_defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
https://github.com/mripard/linuxArnd Bergmann authored
Merge "Allwinner defconfig changes, take 2" from Maxime Ripard: Add the A31 reset driver to the sunxi-related defconfigs * tag 'sunxi-defconfig-for-3.16-2' of https://github.com/mripard/linux: ARM: multi_v7: Add Allwinner reset drivers to multi_v7_defconfig ARM: sunxi: Add A31 reset driver to sunxi_defconfig ARM: sunxi: drop CONFIG_COMMON_CLK_DEBUG Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Merge "mvebu defconfig changes for v3.16 (incremental #2)" from Jason Cooper: - mvebu - enable MSI and XHCI in mvebu_v7_defconfig * tag 'mvebu-defconfig-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: enable MSI support in mvebu_v7_defconfig ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig ARM: multi_v5_defconfig: Enable sound modules needed for t5325 ARM: mvebu_v5_defconfig: Enable sound modules needed for t5325 ARM: mvebu: defconfig: add MTD_SPI_NOR (new dependency for M25P80) ARM: configs: add ahci_mvebu to mvebu_v7_defconfig ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the mvebu_v7_defconfig ARM: mvebu: enable fhandle in the defconfigs ARM: mvebu: Enable nfsroot in the defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Maxime Ripard authored
Now that the reset code are part of drivers of their own, we need those in the defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
Now that the A31 reset code is a driver of its own, we need it in the defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 22 May, 2014 2 commits
-
-
Stephen Boyd authored
Now that DT based platforms are split out of mach-msm into mach-qcom, put back a non-DT based SoC into the msm_defconfig and stop selecting unsupported drivers. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
-
Thomas Petazzoni authored
Since Armada 370, XP, 375 and 38x have PCI MSI support, it makes sense to enable CONFIG_PCI_MSI in mvebu_v7_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1400598964-2062-1-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>
-
- 16 May, 2014 2 commits
-
-
Stephen Boyd authored
Add a defconfig for mach-qcom platforms (copied from msm_defconfig). Although these platforms are part of the multi-platform kernel, it's useful to have a stripped down version of the defconfig that just selects the DT based Qualcomm platforms and drivers. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
-
Gregory CLEMENT authored
The Marvell Armada 38x platform needs the xhci_mvebu driver enabled for the xHCI USB hosts, so this commit enables the corresponding Kconfig option in mvebu_v7_defconfig. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1400149062-32661-13-git-send-email-gregory.clement@free-electrons.comSigned-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1400149062-32661-13-git-send-email-gregory.clement@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>
-
- 14 May, 2014 1 commit
-
-
Stephen Warren authored
AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
- 10 May, 2014 1 commit
-
-
Lad, Prabhakar authored
this patch drops CONFIG_COMMON_CLK_DEBUG option as this config option is now obsolete. CC: Maxime Ripard <maxime.ripard@free-electrons.com> CC: Olof Johansson <olof@lixom.net> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 05 May, 2014 8 commits
-
-
Alexandre Belloni authored
Now that we support Berlin BG2Q, select CONFIG_MACH_BERLIN_BG2Q so that we can boot BG2Q based boards like the BG2Q DMP. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Antoine Ténart authored
The newly integrated dwapb gpio driver handles the Berlin SoCs GPIOs. Add this driver to the multi_v7_defconfig. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Stephen Warren authored
This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-defconfig-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards Merge "Renesas ARM Based SoC Defconfig Updates for v3.16" from Simon Horman: SH Mobile Multi-Platform * Enable USB [EO]HCI HCD, VSP1, HIGHMEM, USBHS, I2C_SH_MOBILE, EEPROM_AT24 and MSIOF * tag 'renesas-defconfig-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig ARM: shmobile: Enable VSP1 in shmobile_defconfig ARM: shmobile: Enable HIGHMEM in shmobile_defconfig ARM: shmobile: Enable USBHS gadget support in shmobile_defconfig ARM: shmobile: Include at24.c in shmobile_defconfig ARM: shmobile: Include i2c-shmobile.c in shmobile_defconfig ARM: shmobile: multiplatform: Enable MSIOF in defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
-
Andrew Lunn authored
Enable simple-card and the CODEC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-10-git-send-email-andrew@lunn.chSigned-off-by: Jason Cooper <jason@lakedaemon.net>
-
Andrew Lunn authored
Enable simple-card and the CODEC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-9-git-send-email-andrew@lunn.chSigned-off-by: Jason Cooper <jason@lakedaemon.net>
-
Linus Torvalds authored
-
Brian Norris authored
These defconfigs contain the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1398925607-7482-9-git-send-email-computersforpeace@gmail.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>
-
- 04 May, 2014 4 commits
-
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking change from Jeff Layton: "Only an email address change to the MAINTAINERS file" * tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux: MAINTAINERS: email address change for Jeff Layton
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "These are mostly arm64 fixes with an additional arm(64) platform fix for the initialisation of vexpress clocks (the latter only affecting arm64; the arch/arm64 code is SoC agnostic and does not rely on early SoC-specific calls) - vexpress platform clocks initialisation moved earlier following the arm64 move of of_clk_init() call in a previous commit - Default DMA ops changed to non-coherent to preserve compatibility with 32-bit ARM DT files. The "dma-coherent" property can be used to explicitly mark a device coherent. The Applied Micro DT file has been updated to avoid DMA cache maintenance for the X-Gene SATA controller (the only arm64 related driver with such assumption in -rc mainline) - Fixmap correction for earlyprintk - kern_addr_valid() fix for huge pages" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: vexpress: Initialise the sysregs before setting up the clocks arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent arm64: Use bus notifiers to set per-device coherent DMA ops arm64: Make default dma_ops to be noncoherent arm64: fixmap: fix missing sub-page offset for earlyprintk arm64: Fix for the arm64 kern_addr_valid() function
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is two patches both fixing bugs in drivers (virtio-scsi and mpt2sas) causing an oops in certain circumstances" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq [SCSI] mpt2sas: Don't disable device twice at suspend.
-
Catalin Marinas authored
Following arm64 commit bc3ee18a (arm64: init: Move of_clk_init to time_init()), vexpress_osc_of_setup() is called via of_clk_init() long before initcalls are issued. Initialising the vexpress oscillators requires the vespress sysregs to be already initialised, so this patch adds an explicit call to vexpress_sysreg_of_early_init() in vexpress oscillator setup function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Mike Turquette <mturquette@linaro.org>
-
- 03 May, 2014 11 commits
-
-
Catalin Marinas authored
Since the default DMA ops for arm64 are non-coherent, mark the X-Gene controller explicitly as dma-coherent to avoid additional cache maintenance. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Loc Ho <lho@apm.com>
-
Catalin Marinas authored
Recently, the default DMA ops have been changed to non-coherent for alignment with 32-bit ARM platforms (and DT files). This patch adds bus notifiers to be able to set the coherent DMA ops (with no cache maintenance) for devices explicitly marked as coherent via the "dma-coherent" DT property. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Ritesh Harjani authored
Currently arm64 dma_ops is by default made coherent which makes it opposite in default policy from arm. Make default dma_ops to be noncoherent (same as arm), as currently there aren't any dma-capable drivers which assumes coherent ops Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Marc Zyngier authored
Commit d57c33c5 (add generic fixmap.h) added (among other similar things) set_fixmap_io to deal with early ioremap of devices. More recently, commit bf4b558e (arm64: add early_ioremap support) converted the arm64 earlyprintk to use set_fixmap_io. A side effect of this conversion is that my virtual machines have stopped booting when I pass "earlyprintk=uart8250-8bit,0x3f8" to the guest kernel. Turns out that the new earlyprintk code doesn't care at all about sub-page offsets, and just assumes that the earlyprintk device will be page-aligned. Obviously, that doesn't play well with the above example. Further investigation shows that set_fixmap_io uses __set_fixmap instead of __set_fixmap_offset. A fix is to introduce a set_fixmap_offset_io that uses the latter, and to remove the superflous call to fix_to_virt (which only returns the value that set_fixmap_io has already given us). With this applied, my VMs are back in business. Tested on a Cortex-A57 platform with kvmtool as platform emulation. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Dave Anderson authored
Fix for the arm64 kern_addr_valid() function to recognize virtual addresses in the kernel logical memory map. The function fails as written because it does not check whether the addresses in that region are mapped at the pmd level to 2MB or 512MB pages, continues the page table walk to the pte level, and issues a garbage value to pfn_valid(). Tested on 4K-page and 64K-page kernels. Signed-off-by: Dave Anderson <anderson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "This udpate delivers: - A fix for dynamic interrupt allocation on x86 which is required to exclude the GSI interrupts from the dynamic allocatable range. This was detected with the newfangled tablet SoCs which have GPIOs and therefor allocate a range of interrupts. The MSI allocations already excluded the GSI range, so we never noticed before. - The last missing set_irq_affinity() repair, which was delayed due to testing issues - A few bug fixes for the armada SoC interrupt controller - A memory allocation fix for the TI crossbar interrupt controller - A trivial kernel-doc warning fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: irq-crossbar: Not allocating enough memory irqchip: armanda: Sanitize set_irq_affinity() genirq: x86: Ensure that dynamic irq allocation does not conflict linux/interrupt.h: fix new kernel-doc warnings irqchip: armada-370-xp: Fix releasing of MSIs irqchip: armada-370-xp: implement the ->check_device() msi_chip operation irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update brings along: - Two fixes for long standing bugs in the hrtimer code, one which prevents remote enqueuing and the other preventing arbitrary delays after a interrupt hang was detected - A fix in the timer wheel which prevents math overflow - A fix for a long standing issue with the architected ARM timer related to the C3STOP mechanism. - A trivial compile fix for nspire SoC clocksource" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Prevent overflow in apply_slack hrtimer: Prevent remote enqueue of leftmost timers hrtimer: Prevent all reprogramming if hang detected clocksource: nspire: Fix compiler warning clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "This is a small fix where the trigger code used the wrong rcu_dereference(). It required rcu_dereference_sched() instead of the normal rcu_dereference(). It produces a nasty RCU lockdep splat due to the incorrect rcu notation" Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> * tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use rcu_dereference_sched() for trace event triggers
-
Steven Rostedt (Red Hat) authored
As trace event triggers are now part of the mainline kernel, I added my trace event trigger tests to my test suite I run on all my kernels. Now these tests get run under different config options, and one of those options is CONFIG_PROVE_RCU, which checks under lockdep that the rcu locking primitives are being used correctly. This triggered the following splat: =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc2-test+ #11 Not tainted ------------------------------- kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by swapper/1/0: #0: ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be #1: (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283 #2: (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8 #3: (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8 stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006 ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20 0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18 Call Trace: <IRQ> [<ffffffff819f53a5>] dump_stack+0x4f/0x7c [<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110 [<ffffffff810ee51c>] event_triggers_call+0x99/0x108 [<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4 [<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c [<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff [<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61 [<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8 [<ffffffff8106eb77>] wake_up_process+0x36/0x3b [<ffffffff810575cc>] wake_up_worker+0x24/0x26 [<ffffffff810578bc>] insert_work+0x5c/0x65 [<ffffffff81059982>] __queue_work+0x26c/0x283 [<ffffffff81059999>] ? __queue_work+0x283/0x283 [<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20 [<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M [<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be [<ffffffff81059999>] ? __queue_work+0x283/0x283 [<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M [<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M [<ffffffff81046d03>] irq_exit+0x42/0x97 [<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44 [<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80 <EOI> [<ffffffff8100a5d8>] ? default_idle+0x21/0x32 [<ffffffff8100a5d6>] ? default_idle+0x1f/0x32 [<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11 [<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213 [<ffffffff8102a23c>] start_secondary+0x212/0x219 The cause is that the triggers are protected by rcu_read_lock_sched() but the data is dereferenced with rcu_dereference() which expects it to be protected with rcu_read_lock(). The proper reference should be rcu_dereference_sched(). Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "A bunch of regression fixes this time. They fix two regressions in the PNP subsystem, one in the ACPI processor driver and one in the ACPI EC driver, four cpufreq driver regressions and an unrelated bug in one of the drivers. The regressions are recent or introduced in 3.14. Specifics: - There are two bugs in the ACPI PNP core that cause errors to be returned if optional ACPI methods are not present. After an ACPI core change made in 3.14 one of those errors leads to serial port suspend failures on some systems. Fix from Rafael J Wysocki. - A recently added PNP quirk related to Intel chipsets intorduced a build error in unusual configurations (PNP without PCI). Fix from Bjorn Helgaas. - An ACPI EC workaround related to system suspend on Samsung machines added in 3.14 introduced a race causing some valid EC events to be discarded. Fix from Kieran Clancy. - The acpi-cpufreq driver fails to load on some systems after a 3.14 commit related to APIC ID parsing that overlooked one corner case. Fix from Lan Tianyu. - Fix for a recently introduced build problem in the ppc-corenet cpufreq driver from Tim Gardner. - A recent cpufreq core change to ensure serialization of frequency transitions for drivers with a ->target_index() callback overlooked the fact that some of those drivers had been doing operations introduced by it into the core already by themselves. That resulted in a mess in which the core and the drivers try to do the same thing and block each other which leads to deadlocks. Fixes for the powernow-k7, powernow-k6, and longhaul cpufreq drivers from Srivatsa S Bhat. - Fix for a computational error in the powernow-k6 cpufreq driver from Srivatsa S Bhat" * tag 'pm+acpi-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Fix failure of loading acpi-cpufreq driver PNP / ACPI: Do not return errors if _DIS or _SRS are not present PNP: Fix compile error in quirks.c ACPI / EC: Process rather than discard events in acpi_ec_clear cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix incorrect comparison with max_multipler cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end
-
git://git.secretlab.ca/git/linuxLinus Torvalds authored
Pull driver core deferred probe fix from Grant Likely: "Drivercore race condition fix (exposed by devicetree) This branch fixes a bug where a device can get stuck in the deferred list even though all its dependencies are met. The bug has existed for a long time, but new platform conversions to device tree have exposed it. This patch is needed to get those platforms working. This was the pending bug fix I mentioned in my previous pull request. Normally this would go through Greg's tree seeing that it is a drivercore change, but devicetree exposes the problem. I've discussed with Greg and he okayed me asking you to pull directly" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: drivercore: deferral race condition fix
-
- 02 May, 2014 2 commits
-
-
Rafael J. Wysocki authored
* acpi-ec: ACPI / EC: Process rather than discard events in acpi_ec_clear * acpi-processor: ACPI / processor: Fix failure of loading acpi-cpufreq driver
-
Rafael J. Wysocki authored
* pnp: PNP / ACPI: Do not return errors if _DIS or _SRS are not present PNP: Fix compile error in quirks.c
-