- 14 Jan, 2024 1 commit
-
-
Martin Kaistra authored
The workqueue might still be running, when the driver is stopped. To avoid a use-after-free, call cancel_work_sync() in rtl8xxxu_stop(). Fixes: e542e66b ("rtl8xxxu: add bluetooth co-existence support for single antenna") Signed-off-by:
Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240111163628.320697-2-martin.kaistra@linutronix.de
-
- 12 Jan, 2024 14 commits
-
-
Bitterblue Smith authored
Currently rtl_usb performs register writes using the async usb_submit_urb() function. This appears to work fine for the RTL8192CU, but the RTL8192DU (soon to be supported by rtlwifi) has a problem: it transmits everything at the 1M rate in the 2.4 GHz band. (The 5 GHz band is still untested.) With this patch, rtl_usb performs the register writes using the synchronous usb_control_msg() function, and the RTL8192DU works normally. The RTL8192CU still works. The vendor drivers use the async writes in only one function, rtl8192du_trigger_gpio_0 / rtl8192cu_trigger_gpio_0, which probably doesn't even run in real life. They use sync writes everywhere else. Also, remove "sync" and "async" from the names of the members of struct rtl_io to avoid confusion: write{8,16,32}_async -> write{8,16,32} read{8,16,32}_sync -> read{8,16,32} Signed-off-by:Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by:
-
Dmitry Antipov authored
Remove unreachable branches in 'rtl92ce_tx_fill_desc()', 'rtl92cu_tx_fill_desc()' and 'rtl8723e_tx_fill_desc()'. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
-
Ping-Ke Shih authored
Since coming WiFi 7 and existing chips use different update_beacon() format, add to abstract selection of H2C command. Signed-off-by:
-
Ping-Ke Shih authored
The firmware of coming WiFi 7 chips can support more AP functions, like virtual AP, so extend format of download beacon frame to configure them. Currently rtw89 only enables AP mode as old chips, so leave new fields zeros. Signed-off-by:
-
Ping-Ke Shih authored
Download beacon frame via H2C command for AP mode, and then firmware can issues beacon periodically. Originally TIM offset minus fixed 24 bytes of frame header implicitly in macro, and this patch explicitly uses ieee80211_hdrlen() to get header length, but expected to change nothing at all. Signed-off-by:
-
Ping-Ke Shih authored
New H2C command is introduced to pause/sleep transmitting. That extends more bits to support more MAC ID, and currently we still configure 256 MAC ID at most. This new command is always used by coming WiFi 7 chips, and existing chips can use old or new command because firmware still preserves the old one. Add a firmware feature flag to determine which command is adopted according to firmware version. Signed-off-by:
-
Ping-Ke Shih authored
To reuse this function to support extended H2C command that is used by newer chip, change to use a pointer to fill pause ID and mask. Signed-off-by:
-
Ping-Ke Shih authored
The WiFi 6 chips use these commands to create BA CAM entry when RX BA session is established, this BA CAM can record whether packets are received or not, then reply BA for current status. This patch doesn't change logic. Signed-off-by:
-
Ping-Ke Shih authored
The total BA CAM number of 8922a is 32 instead of 16, and initial 8 entries are dynamic, so update the entry number to 24. Signed-off-by:
-
Ping-Ke Shih authored
Since chips could use different version of BA CAM H2C command, add a chip_ops to abstract the operation. Signed-off-by:
-
Ping-Ke Shih authored
Add a call of feature_init() when bringing interface up. For now, the feature is to reset BA CAM V1 that is only used by upcoming 8922A. Signed-off-by:
-
Ping-Ke Shih authored
BA CAM is used to generate BA frame for received AMPDU packets. To support WiFi 7, change format from V0 to have more fields and enlarge entry number for new need. Signed-off-by:
-
Alexis Lothoré authored
With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data Fixes: c460495e ("staging: wilc1000: fix incorrent type in initializer") Signed-off-by:
Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by:
-
Alexis Lothoré authored
Reorder parameters declaration in wilc_parse_join_bss_param to enforce reverse christmas tree Signed-off-by:
-
- 10 Jan, 2024 25 commits
-
-
Rahul Rameshbabu authored
bcm4331 seems to not function correctly with QoS support. This may be due to issues with currently available firmware or potentially a device specific issue. When queues that are not of the default "best effort" priority are selected, traffic appears to not transmit out of the hardware while no errors are returned. This behavior is present among all the other priority queues: video, voice, and background. While this can be worked around by setting a kernel parameter, the default behavior is problematic for most users and may be difficult to debug. This patch offers a working out-of-box experience for bcm4331 users. Log of the issue (using ssh low-priority traffic as an example): ssh -T -vvvv git@github.com OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023 debug1: Reading configuration data /etc/ssh/ssh_config debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"' debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'' debug3: command returned status 0 debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"' debug2: match found debug1: /etc/ssh/ssh_config line 9: Applying options for * debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts' debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2' debug2: resolving "github.com" port 22 debug3: resolve_host: lookup github.com:22 debug3: channel_clear_timeouts: clearing debug3: ssh_connect_direct: entering debug1: Connecting to github.com [192.30.255.113] port 22. debug3: set_sock_tos: set socket 3 IP_TOS 0x48 Fixes: e6f5b934 ("b43: Add QOS support") Signed-off-by:Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
-
Rahul Rameshbabu authored
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop queue 0 when QoS is disabled to prevent trying to stop a non-existent queue and failing to stop the actual queue instantiated. Fixes: bad69194 ("b43: avoid packet losses in the dma worker code.") Signed-off-by:
-
Rahul Rameshbabu authored
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Fixes: 5100d5ac ("b43: Add PIO support for PCMCIA devices") Signed-off-by:
-
Rahul Rameshbabu authored
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Log of issue before change (with kernel parameter qos=0): [ +5.112651] ------------[ cut here ]------------ [ +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000044] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000055] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)] [ +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00 [ +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097 [ +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900 [ +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0 [ +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000 [ +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40 [ +0.000001] FS: 0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0 [ +0.000002] Call Trace: [ +0.000003] <TASK> [ +0.000001] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000044] ? __warn+0x81/0x130 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000045] ? report_bug+0x171/0x1a0 [ +0.000004] ? handle_bug+0x41/0x70 [ +0.000004] ? exc_invalid_op+0x17/0x70 [ +0.000003] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000043] ieee80211_wake_queue+0x4a/0x80 [mac80211] [ +0.000044] b43_dma_handle_txstatus+0x29c/0x3a0 [b43] [ +0.000016] ? __pfx_irq_thread_fn+0x10/0x10 [ +0.000002] b43_handle_txstatus+0x61/0x80 [b43] [ +0.000012] b43_interrupt_thread_handler+0x3f9/0x6b0 [b43] [ +0.000011] irq_thread_fn+0x23/0x60 [ +0.000002] irq_thread+0xfe/0x1c0 [ +0.000002] ? __pfx_irq_thread_dtor+0x10/0x10 [ +0.000001] ? __pfx_irq_thread+0x10/0x10 [ +0.000001] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- [ +0.000065] ------------[ cut here ]------------ [ +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000073] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000084] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43] [ +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] Workqueue: phy7 b43_tx_work [b43] [ +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 [ +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097 [ +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900 [ +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900 [ +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0 [ +0.000002] FS: 0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0 [ +0.000002] Call Trace: [ +0.000001] <TASK> [ +0.000001] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? __warn+0x81/0x130 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? report_bug+0x171/0x1a0 [ +0.000005] ? handle_bug+0x41/0x70 [ +0.000003] ? exc_invalid_op+0x17/0x70 [ +0.000004] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] ieee80211_stop_queue+0x36/0x50 [mac80211] [ +0.000077] b43_dma_tx+0x550/0x780 [b43] [ +0.000023] b43_tx_work+0x90/0x130 [b43] [ +0.000018] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27b/0x3a0 [ +0.000004] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork_asm+0x1b/0x30 [ +0.000006] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: e6f5b934 ("b43: Add QOS support") Signed-off-by: -
Bitterblue Smith authored
rtl8xxxu_set_basic_rates() sets the wrong initial RTS rate. It sets the next higher rate than the one it should set, e.g. 36M instead of 24M. The while loop was supposed to find the index of the most significant bit which is 1, but it was copied incorrectly from the vendor driver. Use __fls() instead. Signed-off-by:
-
Bitterblue Smith authored
Some devices, like the Comfast CF-826F, use LED1, which already works. Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly. Write the right values to the LED control registers to make LED0 work as well. This is unfortunately tested only with the Comfast CF-826F. Signed-off-by:
-
Martin Kaistra authored
Everything is in place now for concurrent mode, we can tell the system that we support it. We will allow a maximum of 2 virtual interfaces, one of them can be in AP mode. Signed-off-by:
-
Martin Kaistra authored
When the driver is used for concurrent mode, both virtual interfaces can be set to station or AP mode, though only one can be in AP mode at the same time. In order to keep the code simple, use only hw port 0 for AP mode. When an interface is added in AP mode which would be assigned to port 1, use a switch_port function to transparently swap the mapping between virtual interface and hw port. Signed-off-by:
-
Martin Kaistra authored
Add a custom function for allocating entries in the sec cam. This allows us to store multiple keys with the same keyidx. The maximum number of sec cam entries for 8188f is 16 according to the vendor driver. Add the number to rtl8xxxu_fileops, so that other chips which might support more entries, can set a different number there. Set the bssid as mac address for group keys instead of just using the ethernet broadcast address and use BIT(6) in the sec cam ctrl entry for differentiating them from pairwise keys like in the vendor driver. Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx broadcast/multicast packets in AP mode. Finally, allow the usage of rtl8xxxu_set_key() for AP mode. Signed-off-by:
-
Martin Kaistra authored
Now that all uses of priv->vif have been converted to priv->vifs[] remove the old attribute. Signed-off-by:
-
Martin Kaistra authored
Until now, the driver only assigned a dedicated macid for connections made in AP mode, in STA mode the return value of rtl8xxxu_get_macid() was simply 0. To differentiate between port 0 and 1, when both are in STA mode, allocate a second macid (with value 1) and set sta_info->macid according to the used port_num in rtl8xxxu_sta_add(). Signed-off-by:
-
Martin Kaistra authored
Call set_bssid() with the correct port_num now. Signed-off-by:
-
Martin Kaistra authored
Call set_linktype and set_bssid now with correct port_num. Call stop_tx_beacon only for port 0, as we don't support beacons on port 1. Explicit changes to BEACON will only happen for AP type interfaces, so we don't need an additional check there. Signed-off-by:
-
Martin Kaistra authored
Add a custom struct to store in vif->drv_priv with a reference to port_num and fill it when a new interface is added. Choose a free port_num for the newly added interface. As we only want to support AP mode/sending beacons on port 0, only change the beacon settings if a new interface is actually assigned to port 0. Call set_linktype() and set_mac() with the appropriate port_num. Signed-off-by:
-
Martin Kaistra authored
Check first whether priv->vifs[0] exists and is of type STATION, then go to priv->vifs[1]. Make sure to call refresh_rate_mask for both interfaces. Signed-off-by:
-
Martin Kaistra authored
As we only want to support AP mode/sending beacons on port 0, change from priv->vif to priv->vifs[0] in the check for AP mode. Additionally, if we are in AP mode, don't filter RX beacon and probe response frames to still allow working STATION mode on the other interface. Signed-off-by:
-
Martin Kaistra authored
As we only want to support AP mode/sending beacons on port 0, it is enough to replace priv->vif with priv->vifs[0]. Signed-off-by:
-
Martin Kaistra authored
In concurrent mode supported by this driver, both interfaces will use the same channel and same wireless mode. It is therefore possible to get the wireless mode by checking the first connected interface. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, enhance rtl8xxxu_set_bssid() to write the BSSID of the respective interface to REG_BSSID or REG_BSSID1. Like done with rtl8xxxu_set_mac(), call rtl8xxxu_set_bssid() with port_num = 0, until the callers also support multiple interfaces. Signed-off-by:
-
Martin Kaistra authored
If both interfaces are in STATION mode and both are connected to an AP, there might be conflicting CFO values for the two connections. Ignore the CFO information in this case. Signed-off-by:
-
Martin Kaistra authored
The driver will support two interfaces soon, which both can be in station mode, so extend the check, whether cfo information should be parsed, to cover both interfaces. For better code readability put the lines with priv->vifs[port_num] in a separate function. Signed-off-by:
-
Martin Kaistra authored
There are multiple places in the code where the current connection status of wifi is checked. The driver will support two interfaces soon and either one of them (or both) could be connected. Convert all uses of (vif && vif->cfg.assoc) to a new helper function rtl8xxxu_is_assoc() which checks both interfaces. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the mac address of the respective interface to REG_MACID or REG_MACID1. Remove the call to rtl8xxxu_set_mac() from the init function as we set it in rtl8xxxu_add_interface() later anyway. Until rtl8xxxu_add_interface() can handle both interfaces, call rtl8xxxu_set_mac() with port_num = 0. Signed-off-by:
-
Martin Kaistra authored
The driver currently does not support AP or concurrent mode for 8188e, so just use priv->vifs[0] instead of priv->vif for now. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, enhance the set_linktype function to be able to set the linktype in the MSR register for both hardware ports. Until the users of set_linktype can handle multiple interfaces, use port_num = 0. Signed-off-by:
-
