From: Domen Puncer <domen@coderock.org>

Did it the way it is in drivers/input/joystick/tmdc.c

From: Daniele Bellucci <bellucda@tiscali.it>

From: Daniele Bellucci <bellucda@tiscali.it>

From: Leann Ogasawara <ogasawara@osdl.org>

From: Leann Ogasawara <ogasawara@osdl.org>

From: Eugene Teo <eugene.teo@eugeneteo.net>

Converted code to use pci_name instead of accessing slot_name directly.

From: Eugene Teo <eugene.teo@eugeneteo.net>

Removed initialisation to zero on static variables.

From: Eugene Teo <eugene.teo@eugeneteo.net>

Removed initialisation to zero on static variables in
sound/oss/ad1816.c.

From: Domen Puncer <domen@coderock.org>

Matthew Wilcox wrote:
>
> This routine looks to be bogus to begin with.  i'd just remove the
> save_flags, cli and restore_flags calls entirely.

From: Leann Ogasawara <ogasawara@osdl.org>

   Uninitialize static variables initialized to 0
   so they are pushed to the .bss instead of .data.

From: Maximilian Attems <janitor@sternwelten.at>

From: Daniele Bellucci <bellucda@tiscali.it>

From: Leann Ogasawara <ogasawara@osdl.org>

From: Daniele Bellucci <bellucda@tiscali.it>

Patch from Julie DeWandel.

This patch has solved the crashes observed during TPC-C runs on the
16-way box.  (I'm confident it will fix the other reported cases as
well.)

The race is the setting of timer->base to NULL, by del_timer() or
__run_timers().  If new_base == old_base in __mod_timer() then we do not
re-check timer->base after getting the lock.  (the only case where we do
not have to re-check the base is in the !old_base case, but the else
branch also includes the old_base==new_base case.)

The __run_timers() case made the lock_timer() patch not work fully - we
cannot use lock_timer() in __run_timers() due to lock ordering.

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

From: Stephen Smalley <sds@epoch.ncsc.mil>

This patch adds a SELINUX entry to the MAINTAINERS file.

From: Stephen Smalley <sds@epoch.ncsc.mil>

This patch reworks the SELinux module code that handles inodes initialized
before the policy is initially loaded to also cover the case where a pseudo
filesystem such as selinuxfs or nfsd directly populate themselves.

The list of inode security structures is split into per-superblock lists
associated with each superblock security structure, and the initialization
is performed by superblock_doinit.

From: Shawn Starr <spstarr@sh0n.net>

opl3 use-after-free fix

From: Michael Still <mikal@stillhq.com>

This patch takes into account requests from various LKML members for the
mandocs output to be more terse.  Information about the copyright, and
formatting of the man page is moved into a comment at the start of the
groff output.

Sample output can be found at:
  http://www.stillhq.com/linux/mandocs/2.6.0-test3-bk1/

From: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>

verify maximum number of bits before using set_bit

Touching a page via follow_page() counts as a reference so we should be
either setting the referenced bit in the pte or running mark_page_accessed().

Altering the pte is tricky because we haven't implemented an atomic
pte_mkyoung().  And mark_page_accessed() is better anyway because it has more
aging state: it can move the page onto the active list.

If POKETEXT modifies the page it needs to tell the VM about it.

From: Stephen Rothwell <sfr@canb.auug.org.au>

Fix the dnotify documentation and code example to reflect reality.

From: Rusty Lynch <rusty@linux.co.intel.com>

While initializing the adm1021 device, the driver is performing a conversion
from fixed point to Celcius on values that were declaired as Celcius.  On my
Dell Precision 220 this results in a shutdown after a couple of minutes
running.

The latch simply removes the conversion.

From: Matthew Wilcox <willy@debian.org>

Introduce a new variable "arg_size" and set it appropriately in each arm of
the CONFIG_STACK_GROWSUP.  This patch fixes a bug for PA-RISC and makes the
code cleaner for everyone.

From: Dave Olien <dmo@osdl.org>

The dynamic queue allocation appears to have exposed a long-standing bug.

From: Todor Todorov <ttodorov@web.de>

A missig line fs/nls/Makefile prevents codepage 1250 from compiling and
installing whatever the .config value.

From: Yoshinori Sato <ysato@users.sourceforge.jp>

It writes one too many zeroes when nulling out the destination.

From: Matthew Dobson <colpatch@us.ibm.com>

16 proc x440 boxen aren't booting mainline kernels right now for many valid
configs.  This patch makes sure NUMA codepaths aren't executed for SMP
configs.  It also adds some sane error messages to the code, and cleans up
some #ifdefs.

From: Josh Boyer <jwboyer@charter.net>

jffs was missed in the statfs64 conversions.

From: Manuel Estrada Sainz <ranty@debian.org>

Add Manuel to MAINTAINERS for request_firmware().

From: Manuel Estrada Sainz <ranty@debian.org>

Add some higher level docs to Documentation/firmware_class/README.

From: Zwane Mwaikambo <zwane@linuxpower.ca>

The code appears to be able to add too many blocks back to
sbinfo->free_blocks in the failure path. We first do;

len = vma->vm_end - vma->vm_start;
sbinfo->free_blocks -= len;

but then later do;
len = (vma->vm_end - vma->vma_start) + (vma->vm_pgoff << HPAGE_SHIFT)

error:
sbinfo->free_blocks += len;

From: Zwane Mwaikambo <zwane@linuxpower.ca>

drivers/char/ipmi/ipmi_kcs_intf.c: In function `acpi_find_bmc':
drivers/char/ipmi/ipmi_kcs_intf.c:1088: warning: long unsigned int format, different type arg (arg 2)
drivers/char/ipmi/ipmi_kcs_intf.c:1088: warning: long unsigned int format, different type arg (arg 2)

From: Albert Cahalan <albert@users.sourceforge.net>

1. allows likely() and unlikely() to work for pointers

2. fixes likely() (in C, any non-zero value is true)