- 13 Jan, 2019 11 commits
-
-
Pan Bian authored
[ Upstream commit 708abf74 ] In the error handling block, nla_nest_cancel(skb, atd) is called to cancel the nest operation. But then, ipset_nest_end(skb, atd) is unexpected called to end the nest operation. This patch calls the ipset_nest_end only on the branch that nla_nest_cancel is not called. Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tony Lindgren authored
[ Upstream commit e2ca26ec ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9ae4f842 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 530aad77 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by:
Neel Mehta <nmehta@google.com> Reported-by:
Shane Huntley <shuntley@google.com> Reported-by:
Heather Adkins <argv@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit ca92e173 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit f1733a1d ] There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Hutterer authored
[ Upstream commit c201e380 ] ABS_RESERVED was added in d9ca1c99 and accidentally removed as part of ffe0e7cf when the high-resolution scrolling code was removed. Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
-
Fabio Estevam authored
[ Upstream commit f15096f1 ] According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 56354959 ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 1e434b70 ] The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f08 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Paul Mackerras authored
[ Upstream commit 5564597d ] Commit 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware. This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program. Fixes: 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 614b1868 ] We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8 ("pinctrl: meson: fix pinconf bias disable") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 09 Jan, 2019 29 commits
-
-
Greg Kroah-Hartman authored
-
Lukas Wunner authored
commit 29bdedfd upstream. Commit e82b0b38 ("spi: bcm2835: Fix race on DMA termination") broke the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit operands (xtensa, older arm ISAs). Fix by changing the dma_pending flag's type from bool to unsigned int. Fixes: e82b0b38 ("spi: bcm2835: Fix race on DMA termination") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
commit 2ba5780c upstream. tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> (For TPM 2.0) Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit 3cc9ffbb upstream. Add the missing adjustment of the month range on alarm reads from the RTC, correcting an issue coming from commit 9c6dfed9 ("rtc: m41t80: add alarm functionality"). The range is 1-12 for hardware and 0-11 for `struct rtc_time', and is already correctly handled on alarm writes to the RTC. It was correct up until commit 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") too, which removed the previous implementation of alarm support. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: 9c6dfed9 ("rtc: m41t80: add alarm functionality") References: 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Will Deacon authored
commit df655b75 upstream. Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as signed, which is sign-extended when assigning to kvm->arch.vtcr. Lucky for us, the architecture currently treats these upper bits as RES0 so, whilst we've been naughty, we haven't set fire to anything yet. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit d391f120 upstream. I was investigating an issue with seabios >= 1.10 which stopped working for nested KVM on Hyper-V. The problem appears to be in handle_ept_violation() function: when we do fast mmio we need to skip the instruction so we do kvm_skip_emulated_instruction(). This, however, depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS. However, this is not the case. Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when EPT MISCONFIG occurs. While on real hardware it was observed to be set, some hypervisors follow the spec and don't set it; we end up advancing IP with some random value. I checked with Microsoft and they confirmed they don't fill VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG. Fix the issue by doing instruction skip through emulator when running nested. Fixes: 68c3b4d1Suggested-by:
Radim Krčmář <rkrcmar@redhat.com> Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> [mhaboustak: backport to 4.9.y] Signed-off-by:
Mike Haboustak <haboustak@gmail.com> Signed-off-by:
-
Georgy A Bystrenin authored
commit 9a596f5b upstream. While resolving a bug with locks on samba shares found a strange behavior. When a file locked by one node and we trying to lock it from another node it fail with errno 5 (EIO) but in that case errno must be set to (EACCES | EAGAIN). This isn't happening when we try to lock file second time on same node. In this case it returns EACCES as expected. Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in mount options). Further investigation showed that the mapping from status_to_posix_error is different for SMB1 and SMB2+ implementations. For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock] (See fs/cifs/netmisc.c line 66) but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO] (see fs/cifs/smb2maperror.c line 383) Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue. BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971Signed-off-by:
Georgy A Bystrenin <gkot@altlinux.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Aaro Koskinen authored
commit edefae94 upstream. Commit 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") added RGMII interface detection for OCTEON III, but it results in the following logs: [ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe [ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe The current RGMII routines are valid only for older OCTEONS that use GMX/ASX hardware blocks. On later chips AGL should be used, but support for that is missing in the mainline. Until that is added, mark the interface as disabled. Fixes: 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
-
Huacai Chen authored
commit bec0de4c upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Huacai Chen authored
commit 92aa0718 upstream. This patch is borrowed from ARM64 to ensure pmd_present() returns false after pmd_mknotpresent(). This is needed for THP. References: 5bb1cc0f ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()") Reviewed-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit e5f71a27 upstream. text[s] is a signed char, so using that as index into the font8x16 array can result in negative indices. Cast it to u8 to be safe. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit 560ccb75 upstream. When vivid_update_format_cap() is called it should free any overlay bitmap since the compose size will change. Signed-off-by:
-
Nava kishore Manne authored
commit 26068313 upstream. This patch Correct the RX interrupt mask value to handle the RX interrupts properly. Fixes: c8dbdc84 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by:
Nava kishore Manne <nava.manne@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Martin Blumenstingl authored
commit 88960068 upstream. Treat "block_count" from struct f2fs_super_block as 64-bit little endian value in sanity_check_raw_super() because struct f2fs_super_block declares "block_count" as "__le64". This fixes a bug where the superblock validation fails on big endian devices with the following error: F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0) F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0) F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock As result of this the partition cannot be mounted. With this patch applied the superblock validation works fine and the partition can be mounted again: F2FS-fs (sda1): Mounted with checkpoint version = 7c84 My little endian x86-64 hardware was able to mount the partition without this fix. To confirm that mounting f2fs filesystems works on big endian machines again I tested this on a 32-bit MIPS big endian (lantiq) device. Fixes: 0cfe75c5 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows") Cc: stable@vger.kernel.org Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Macpaul Lin authored
commit eafb27fa upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Johan Jonker authored
commit 8b19faf6 upstream. Fix typo in common_clk_branches. Make spdif_pre parent of spdif_frac. Fixes: 66746420 ("clk: rockchip: include downstream muxes into fractional dividers") Cc: stable@vger.kernel.org Signed-off-by:
Johan Jonker <jbx9999@hotmail.com> Acked-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Lukas Wunner authored
commit 56c17234 upstream. The IRQ handler bcm2835_spi_interrupt() first reads as much as possible from the RX FIFO, then writes as much as possible to the TX FIFO. Afterwards it decides whether the transfer is finished by checking if the TX FIFO is empty. If very few bytes were written to the TX FIFO, they may already have been transmitted by the time the FIFO's emptiness is checked. As a result, the transfer will be declared finished and the chip will be reset without reading the corresponding received bytes from the RX FIFO. The odds of this happening increase with a high clock frequency (such that the TX FIFO drains quickly) and either passing "threadirqs" on the command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ handler may be preempted between filling the TX FIFO and checking its emptiness). Fix by instead checking whether rx_len has reached zero, which means that the transfer has been received in full. This is also more efficient as it avoids one bus read access per interrupt. Note that bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine whether the transfer has finished. Signed-off-by:
-
Lukas Wunner authored
commit dbc94411 upstream. If submission of a DMA TX transfer succeeds but submission of the corresponding RX transfer does not, the BCM2835 SPI driver terminates the TX transfer but neglects to reset the dma_pending flag to false. Thus, if the next transfer uses interrupt mode (because it is shorter than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout, dmaengine_terminate_all() will be called both for TX (once more) and for RX (which was never started in the first place). Fix it. Signed-off-by:
-
Lukas Wunner authored
commit e82b0b38 upstream. If a DMA transfer finishes orderly right when spi_transfer_one_message() determines that it has timed out, the callbacks bcm2835_spi_dma_done() and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(), potentially leading to double termination. Prevent by atomically changing the dma_pending flag before calling dmaengine_terminate_all(). Signed-off-by:
-
Theodore Ts'o authored
commit fde87268 upstream. Some time back, nfsd switched from calling vfs_fsync() to using a new commit_metadata() hook in export_operations(). If the file system did not provide a commit_metadata() hook, it fell back to using sync_inode_metadata(). Unfortunately doesn't work on all file systems. In particular, it doesn't work on ext4 due to how the inode gets journalled --- the VFS writeback code will not always call ext4_write_inode(). So we need to provide our own ext4_nfs_commit_metdata() method which calls ext4_write_inode() directly. Google-Bug-Id: 121195940 Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit a805622a upstream. In ext4_expand_extra_isize_ea(), we calculate the total size of the xattr header, plus the xattr entries so we know how much of the beginning part of the xattrs to move when expanding the inode extra size. We need to include the terminating u32 at the end of the xattr entries, or else if there is uninitialized, non-zero bytes after the xattr entries and before the xattr values, the list of xattr entries won't be properly terminated. Reported-by:
Steve Graham <stgraham2000@gmail.com> Signed-off-by:
-
ruippan (潘睿) authored
commit e647e291 upstream. Commit e2b911c5 ("ext4: clean up feature test macros with predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was not noticed since only very old versions of resize2fs (before e2fsprogs 1.42) use this ioctl. However, using a new kernel with an enterprise Linux userspace will cause attempts to use online resize to fail with "No reserved GDT blocks". Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate...") Cc: stable@kernel.org # v4.4 Signed-off-by:
ruippan (潘睿) <ruippan@tencent.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 132d00be upstream. In case of error, ext4_try_to_write_inline_data() should unlock and release the page it holds. Fixes: f19d5870 ("ext4: add normal write support for inline data") Cc: stable@kernel.org # 3.8 Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Pan Bian authored
commit 61157b24 upstream. The function frees qf_inode via iput but then pass qf_inode to lockdep_set_quota_inode on the failure path. This may result in a use-after-free bug. The patch frees df_inode only when it is never used. Fixes: daf647d2 ("ext4: add lockdep annotations for i_data_sem") Cc: stable@kernel.org # 4.6 Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Ben Hutchings authored
commit 11a64a05 upstream. Depending on which functions are inlined in util/pmu.c, the snprintf() calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a warning: util/pmu.c: In function 'pmu_aliases': util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=] snprintf(path, PATH_MAX, "%s/%s.unit", dir, name); ^~ I found this when trying to build perf from Linux 3.16 with gcc 8. However I can reproduce the problem in mainline if I force __perf_pmu__new_alias() to be inlined. Suppress this by using scnprintf() as has been done elsewhere in perf. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181111184524.fux4taownc6ndbx6@decadent.org.ukSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Miquel Raynal authored
commit 81b1e6e6 upstream. Since the addition of platform MSI support, there were two helpers supposed to allocate/free IRQs for a device: platform_msi_domain_alloc_irqs() platform_msi_domain_free_irqs() In these helpers, IRQ descriptors are allocated in the "alloc" routine while they are freed in the "free" one. Later, two other helpers have been added to handle IRQ domains on top of MSI domains: platform_msi_domain_alloc() platform_msi_domain_free() Seen from the outside, the logic is pretty close with the former helpers and people used it with the same logic as before: a platform_msi_domain_alloc() call should be balanced with a platform_msi_domain_free() call. While this is probably what was intended to do, the platform_msi_domain_free() does not remove/free the IRQ descriptor(s) created/inserted in platform_msi_domain_alloc(). One effect of such situation is that removing a module that requested an IRQ will let one orphaned IRQ descriptor (with an allocated MSI entry) in the device descriptors list. Next time the module will be inserted back, one will observe that the allocation will happen twice in the MSI domain, one time for the remaining descriptor, one time for the new one. It also has the side effect to quickly overshoot the maximum number of allocated MSI and then prevent any module requesting an interrupt in the same domain to be inserted anymore. This situation has been met with loops of insertion/removal of the mvpp2.ko module (requesting 15 MSIs each time). Fixes: 552c494a ("platform-msi: Allow creation of a MSI-based stacked irq domain") Cc: stable@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Sean Christopherson authored
commit e8143499 upstream. ____kvm_handle_fault_on_reboot() provides a generic exception fixup handler that is used to cleanly handle faults on VMX/SVM instructions during reboot (or at least try to). If there isn't a reboot in progress, ____kvm_handle_fault_on_reboot() treats any exception as fatal to KVM and invokes kvm_spurious_fault(), which in turn generates a BUG() to get a stack trace and die. When it was originally added by commit 4ecac3fd ("KVM: Handle virtualization instruction #UD faults during reboot"), the "call" to kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value is the RIP of the faulting instructing. The PUSH+JMP trickery is necessary because the exception fixup handler code lies outside of its associated function, e.g. right after the function. An actual CALL from the .fixup code would show a slightly bogus stack trace, e.g. an extra "random" function would be inserted into the trace, as the return RIP on the stack would point to no known function (and the unwinder will likely try to guess who owns the RIP). Unfortunately, the JMP was replaced with a CALL when the macro was reworked to not spin indefinitely during reboot (commit b7c4145b "KVM: Don't spin on virt instruction faults during reboot"). This causes the aforementioned behavior where a bogus function is inserted into the stack trace, e.g. my builds like to blame free_kvm_area(). Revert the CALL back to a JMP. The changelog for commit b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") contains nothing that indicates the switch to CALL was deliberate. This is backed up by the fact that the PUSH <insn RIP> was left intact. Note that an alternative to the PUSH+JMP magic would be to JMP back to the "real" code and CALL from there, but that would require adding a JMP in the non-faulting path to avoid calling kvm_spurious_fault() and would add no value, i.e. the stack trace would be the same. Using CALL: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0 R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000 FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0 Call Trace: free_kvm_area+0x1044/0x43ea [kvm_intel] ? vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace 9775b14b123b1713 ]--- Using JMP: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0 R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40 FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0 Call Trace: vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace f9daedb85ab3ddba ]--- Fixes: b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Patrick Dreyer authored
commit 7db54c89 upstream. This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by:
Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Bjørn Mork authored
commit 102cd909 upstream. SIMCOM are reusing a single device ID for many (all of their?) different modems, based on different chipsets and firmwares. Newer Qualcomm chipset generations require setting DTR to wake the QMI function. The SIM7600E modem is using such a chipset, making it fail to work with this driver despite the device ID match. Fix by unconditionally enabling the SET_DTR quirk for all SIMCOM modems using this specific device ID. This is similar to what we already have done for another case of device IDs recycled over multiple chipset generations: 14cf4a77 ("drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201") Initial testing on an older SIM7100 modem shows no immediate side effects. Reported-by:
Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Cc: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
