- 05 Dec, 2022 4 commits
-
-
Josef Bacik authored
Currently if we fail to lock a range we'll return the start of the range that we failed to lock. We'll then search down to this range and wait on any extent states in this range. However we can avoid this search altogether if we simply cache the extent_state that had the contention. We can pass this into wait_extent_bit() and start from that extent_state without doing the search. In the most optimistic case we can avoid all searches, more likely we'll avoid the initial search and have to perform the search after we wait on the failed state, or worst case we must search both times which is what currently happens. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Josef Bacik authored
All of the relocation code avoids using the cached state, despite everywhere using the normal lock_extent() // do something unlock_extent() pattern. Fix this by plumbing a cached state throughout all of these functions in order to allow for less tree searches. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Josef Bacik authored
Now that try_lock_extent() takes a cached_state, plumb the cached_state through btrfs_try_lock_ordered_range() and then use a cached_state in btrfs_check_nocow_lock everywhere to avoid extra tree searches on the extent_io_tree. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Josef Bacik authored
With nowait becoming more pervasive throughout our codebase go ahead and add a cached_state to try_lock_extent(). This allows us to be faster about clearing the locked area if we have contention, and then gives us the same optimization for unlock if we are able to lock the range. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
- 04 Dec, 2022 7 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit f35b5d7d. It has been reported to cause huge performance regressions on some loads (will-it-scale.per_process_ops, but also building the kernel with clang). The commit did speed up gcc builds by a small amount, so it's not an unambiguous regression, but until the big regressions are understood, let's revert it. Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/r/202210181535.7144dd15-yujie.liu@intel.comReported-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/lkml/Y1DNQaoPWxE%2BrGce@dev-arch.thelio-3990X/ Cc: Huang, Ying <ying.huang@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Dabros authored
Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by: Jan Dabros <jsd@semihalf.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/ Cc: stable@vger.kernel.org Fixes: e891db1a ("tpm: turn on TPM on suspend for TPM 1.x") [Jason: reworked commit message, added metadata] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Borislav Petkov: - Fix a use-after-free case where the perf pending task callback would see an already freed event * tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_pending_task() UaF
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Revert a fix to RISC-V timers supposed to address an uncertainty whether clock events are received during S3 or not which locks up other RISC-V platforms. The issue will be fixed differently later. * tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix oops in 32-bit BPF tail call tests - Add missing declaration for machine_check_early_boot() Thanks to Christophe Leroy and Naveen N. Rao. * tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Add missing declaration for machine_check_early_boot() powerpc/bpf/32: Fix Oops on tail call tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: - a fix for Raydium touchscreen driver to stop leaking memory when sending commands to the chip * tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
-
- 03 Dec, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A power state fix in the core for ACPI devices, a regression fix regarding bus recovery for the cadence driver, a DMA handling fix for the imx driver, and two error path fixes (npcm7xx and qcom-geni)" * tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer i2c: cadence: Fix regression with bus recovery i2c: Restore initial power state if probe fails i2c: npcm7xx: Fix error handling in npcm_i2c_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull dax fixes from Dan Williams: "A few bug fixes around the handling of "Soft Reserved" memory and memory tiering information. Linux is starting to enounter more real world systems that deploy an ACPI HMAT to describe different performance classes of memory, as well the "special purpose" (Linux "Soft Reserved") designation from EFI. These fixes result from that testing. It has all appeared in -next for a while with no known issues. - Fix duplicate overlapping device-dax instances for HMAT described "Soft Reserved" Memory - Fix missing node targets in the sysfs representation of memory tiers - Remove a confusing variable initialization" * tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: Fix duplicate 'hmem' device registration ACPI: HMAT: Fix initiator registration for single-initiator systems ACPI: HMAT: remove unnecessary variable initialization
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just a small NVMe merge for this week, fixing protection of the name space list, and a missing clear of a reserved field when unused" * tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux: nvme: fix SRCU protection of nvme_ns_head list nvme-pci: clear the prp2 field when not used
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Three driver fixes. The Intel fix looks like the most important. - Fix a potential divide by zero in pinctrl-singe (OMAP and HiSilicon) - Disable IRQs on startup in the Mediatek driver. This is a classic, we should be looking out for this more. - Save and restore pins in 'direct IRQ' mode in the Intel driver, this works around firmware bugs" * tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: Save and restore pins in "direct IRQ" mode pinctrl: meditatek: Startup with the IRQs disabled pinctrl: single: Fix potential division by zero
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - build fix for the NR_CPUS Kconfig SBI version dependency - fixes to early memory initialization, to fix page permissions in EFI and post-initmem-free - build fix for the VDSO, to avoid trying to profile the VDSO functions - fixes for kexec crash handling, to fix multi-core and interrupt related initialization inside the crash kernel - fix for a race condition when handling multiple concurrect kernel stack overflows * tag 'riscv-for-linus-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: kexec: Fixup crash_smp_send_stop without multi cores riscv: kexec: Fixup irq controller broken in kexec crash path riscv: mm: Proper page permissions after initmem free riscv: vdso: fix section overlapping under some conditions riscv: fix race when vmap stack overflow riscv: Sync efi page table's kernel mappings before switching riscv: Fix NR_CPUS range conditions
-
- 02 Dec, 2022 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix ambiguous TRIM and DISCARD args - Fix removal of debugfs file for mmc_test MMC host: - mtk-sd: Add missing clk_disable_unprepare() in an error path - sdhci: Fix I/O voltage switch delay for UHS-I SD cards - sdhci-esdhc-imx: Fix CQHCI exit halt state check - sdhci-sprd: Fix voltage switch" * tag 'mmc-v6.1-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-sprd: Fix no reset data and command after voltage switch mmc: sdhci: Fix voltage switch delay mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse() mmc: mmc_test: Fix removal of debugfs file mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check mmc: core: Fix ambiguous TRIM and DISCARD arg
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "Intel VT-d fixes: - IO/TLB flush fix - Various pci_dev refcount fixes" * tag 'iommu-fixes-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init() iommu/vt-d: Fix PCI device refcount leak in has_external_pci() iommu/vt-d: Fix PCI device refcount leak in prq_event_thread() iommu/vt-d: Add a fix for devices need extra dtlb flush
-
Pawan Gupta authored
The "force" argument to write_spec_ctrl_current() is currently ambiguous as it does not guarantee the MSR write. This is due to the optimization that writes to the MSR happen only when the new value differs from the cached value. This is fine in most cases, but breaks for S3 resume when the cached MSR value gets out of sync with the hardware MSR value due to S3 resetting it. When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write is skipped. Which results in SPEC_CTRL mitigations not getting restored. Move the MSR write from write_spec_ctrl_current() to a new function that unconditionally writes to the MSR. Update the callers accordingly and rename functions. [ bp: Rework a bit. ] Fixes: caa0ff24 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value") Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zhang Xiaoxu authored
There is a kmemleak when test the raydium_i2c_ts with bpf mock device: unreferenced object 0xffff88812d3675a0 (size 8): comm "python3", pid 349, jiffies 4294741067 (age 95.695s) hex dump (first 8 bytes): 11 0e 10 c0 01 00 04 00 ........ backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff88812d3675c8 (size 8): comm "python3", pid 349, jiffies 4294741070 (age 95.692s) hex dump (first 8 bytes): 22 00 36 2d 81 88 ff ff ".6-.... backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 After BANK_SWITCH command from i2c BUS, no matter success or error happened, the tx_buf should be freed. Fixes: 3b384bd6 ("Input: raydium_ts_i2c - do not split tx transactions") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Likely the last piece for 6.1; the only significant fixes are ASoC core ops fixes, while others are device-specific (rather minor) fixes in ASoC and FireWire drivers. All appear safe enough to take as a late stage material" * tag 'sound-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: dice: fix regression for Lexicon I-ONIX FW810S ASoC: cs42l51: Correct PGA Volume minimum value ASoC: ops: Correct bounds check for second channel on SX controls ASoC: tlv320adc3xxx: Fix build error for implicit function declaration ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() ASoC: ops: Fix bounds check for _sx controls ASoC: fsl_micfil: explicitly clear CHnF flags ASoC: fsl_micfil: explicitly clear software reset bit
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Things do seem to have finally settled down, just four i915 and one amdgpu this week. Probably won't have much for next week if you do push rc8 out. i915: - Fix dram info readout - Remove non-existent pipes from bigjoiner pipe mask - Fix negative value passed as remaining time - Never return 0 if not all requests retired amdgpu: - VCN fix for vangogh" * tag 'drm-fixes-2022-12-02' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: enable Vangogh VCN indirect sram mode drm/i915: Never return 0 if not all requests retired drm/i915: Fix negative value passed as remaining time drm/i915: Remove non-existent pipes from bigjoiner pipe mask drm/i915/mtl: Fix dram info readout
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull misc hotfixes from Andrew Morton: "15 hotfixes, 11 marked cc:stable. Only three or four of the latter address post-6.0 issues, which is hopefully a sign that things are converging" * tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible" Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths mm/khugepaged: fix GUP-fast interaction by sending IPI mm/khugepaged: take the right locks for page table retraction mm: migrate: fix THP's mapcount on isolation mm: introduce arch_has_hw_nonleaf_pmd_young() mm: add dummy pmd_young() for architectures not having it mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep" nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing madvise: use zap_page_range_single for madvise dontneed mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
-
Linus Torvalds authored
The V4L2_MEMORY_USERPTR interface is long deprecated and shouldn't be used (and is discouraged for any modern v4l drivers). And Seth Jenkins points out that the fallback to VM_PFNMAP/VM_IO is fundamentally racy and dangerous. Note that it's not even a case that should trigger, since any normal user pointer logic ends up just using the pin_user_pages_fast() call that does the proper page reference counting. That's not the problem case, only if you try to use special device mappings do you have any issues. Normally I'd just remove this during the merge window, but since Seth pointed out the problem cases, we really want to know as soon as possible if there are actually any users of this odd special case of a legacy interface. Neither Hans nor Mauro seem to think that such mis-uses of the old legacy interface should exist. As Mauro says: "See, V4L2 has actually 4 streaming APIs: - Kernel-allocated mmap (usually referred simply as just mmap); - USERPTR mmap; - read(); - dmabuf; The USERPTR is one of the oldest way to use it, coming from V4L version 1 times, and by far the least used one" And Hans chimed in on the USERPTR interface: "To be honest, I wouldn't mind if it goes away completely, but that's a bit of a pipe dream right now" but while removing this legacy interface entirely may be a pipe dream we can at least try to remove the unlikely (and actively broken) case of using special device mappings for USERPTR accesses. This replaces it with a WARN_ONCE() that we can remove once we've hopefully confirmed that no actual users exist. NOTE! Longer term, this means that a 'struct frame_vector' only ever contains proper page pointers, and all the games we have with converting them to pages can go away (grep for 'frame_vector_to_pages()' and the uses of 'vec->is_pfns'). But this is just the first step, to verify that this code really is all dead, and do so as quickly as possible. Reported-by: Seth Jenkins <sethjenkins@google.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - fix SRCU protection of nvme_ns_head list (Caleb Sander) - clear the prp2 field when not used (Lei Rao)" * tag 'nvme-6.1-2022-01-02' of git://git.infradead.org/nvme: nvme: fix SRCU protection of nvme_ns_head list nvme-pci: clear the prp2 field when not used
-
Xiongfeng Wang authored
for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the error path to avoid reference count leak. Fixes: 2e455289 ("iommu/vt-d: Unify the way to process DMAR device scope array") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221121113649.190393-3-wangxiongfeng2@huawei.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Xiongfeng Wang authored
for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() before 'return true' to avoid reference count leak. Fixes: 89a6079d ("iommu/vt-d: Force IOMMU on for platform opt in hint") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221121113649.190393-2-wangxiongfeng2@huawei.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Yang Yingliang authored
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrease the reference count by calling pci_dev_put(). So call pci_dev_put() after using the 'pdev' to avoid refcount leak. Besides, if the 'pdev' is null or intel_svm_prq_report() returns error, there is no need to trace this fault. Fixes: 06f4b8d0 ("iommu/vt-d: Remove unnecessary SVA data accesses in page fault path") Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221119144028.2452731-1-yangyingliang@huawei.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Jacob Pan authored
QAT devices on Intel Sapphire Rapids and Emerald Rapids have a defect in address translation service (ATS). These devices may inadvertently issue ATS invalidation completion before posted writes initiated with translated address that utilized translations matching the invalidation address range, violating the invalidation completion ordering. This patch adds an extra device TLB invalidation for the affected devices, it is needed to ensure no more posted writes with translated address following the invalidation completion. Therefore, the ordering is preserved and data-corruption is prevented. Device TLBs are invalidated under the following six conditions: 1. Device driver does DMA API unmap IOVA 2. Device driver unbind a PASID from a process, sva_unbind_device() 3. PASID is torn down, after PASID cache is flushed. e.g. process exit_mmap() due to crash 4. Under SVA usage, called by mmu_notifier.invalidate_range() where VM has to free pages that were unmapped 5. userspace driver unmaps a DMA buffer 6. Cache invalidation in vSVA usage (upcoming) For #1 and #2, device drivers are responsible for stopping DMA traffic before unmap/unbind. For #3, iommu driver gets mmu_notifier to invalidate TLB the same way as normal user unmap which will do an extra invalidation. The dTLB invalidation after PASID cache flush does not need an extra invalidation. Therefore, we only need to deal with #4 and #5 in this patch. #1 is also covered by this patch due to common code path with #5. Tested-by: Yuzhang Luo <yuzhang.luo@intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20221130062449.1360063-1-jacob.jun.pan@linux.intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
- 01 Dec, 2022 11 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.1-2022-12-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-12-01: amdgpu: - VCN fix for vangogh Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221201202015.5931-1-alexander.deucher@amd.com
-
Andrew Lunn authored
Recent changes to the DMA code has resulting in the IMX driver failing I2C transfers when the buffer has been vmalloc. Only perform DMA transfers if the message has the I2C_M_DMA_SAFE flag set, indicating the client is providing a buffer which is DMA safe. This is a minimal fix for stable. The I2C core provides helpers to allocate a bounce buffer. For a fuller fix the master should make use of these helpers. Fixes: 4544b9f2 ("dma-mapping: Add vmap checks to dma_map_single()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Wang Yufen authored
Fix to return a negative error code from the gi2c->err instead of 0. Fixes: d8703554 ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Carsten Haitzler authored
Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c devices that have no pinctrl defined. There is no requirement for this to exist in the DT. This has worked perfectly well without this before in at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to talk to a tda99xx phy). Adding the requirement to have pinctrl set up in the device tree (or otherwise be found) is a regression where the whole i2c device is lost entirely (in this case dropping entire devices which then leads to the drm display stack unable to find the phy for display output, thus having no drm display device and so on down the chain). This converts the above commit to an enhancement if pinctrl can be found for the i2c device, providing a timeout on read with recovery, but if not, do what used to be done rather than a fatal loss of a device. This restores the mentioned display devices to their working state again. Fixes: 58b92424 ("i2c: cadence: Add standard bus recovery support") Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Michal Simek <michal.simek@amd.com> [wsa: added braces to else-branch] Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2022-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix dram info readout (Radhakrishna Sripada) - Remove non-existent pipes from bigjoiner pipe mask (Ville Syrjälä) - Fix negative value passed as remaining time (Janusz Krzysztofik) - Never return 0 if not all requests retired (Janusz Krzysztofik) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y4hp+a3TJ13t2ZA1@tursulin-desk
-
Steven Rostedt (Google) authored
The config to be able to inject error codes into any function annotated with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is enabled. But unfortunately, this is always enabled on x86 when KPROBES is enabled, and there's no way to turn it off. As kprobes is useful for observability of the kernel, it is useful to have it enabled in production environments. But error injection should be avoided. Add a prompt to the config to allow it to be disabled even when kprobes is enabled, and get rid of the "def_bool y". This is a kernel debug feature (it's in Kconfig.debug), and should have never been something enabled by default. Cc: stable@vger.kernel.org Fixes: 540adea3 ("error-injection: Separate error-injection from kprobe") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Leo Liu authored
So that uses PSP to initialize HW. Fixes: 0c2c02b6 ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish") Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Palmer Dabbelt authored
This fixes a concrete bug but is also the basis for some cleanup work, so I'm merging it based on the offending commit in order to minimize future conflicts. * commit '7e186433': riscv: fix race when vmap stack overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fix from Ard Biesheuvel: "A single revert for some code that I added during this cycle. The code is not wrong, but it should be a bit more careful about how to handle the shadow call stack pointer, so it is better to revert it for now and bring it back later in improved form. Summary: - Revert runtime service sync exception recovery on arm64" * tag 'efi-fixes-for-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: arm64: efi: Revert "Recover from synchronous exceptions ..."
-
Linus Torvalds authored
Merge tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix refcount leak and NULL pointer access in coretemp driver - Fix UAF in ibmpex driver - Add missing pci_disable_device() to i5500_temp driver - Fix calculation in ina3221 driver - Fix temperature scaling in ltc2947 driver - Check result of devm_kcalloc call in asus-ec-sensors driver * tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() hwmon: (coretemp) Check for null before removing sysfs attrs hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails hwmon: (i5500_temp) fix missing pci_disable_device() hwmon: (ina3221) Fix shunt sum critical calculation hwmon: (ltc2947) fix temperature scaling
-
Yuan Can authored
As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. Fixes: d0ddfd24 ("hwmon: (asus-ec-sensors) add driver for ASUS EC") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
-