- 13 Jun, 2012 1 commit
-
-
Paul Mundt authored
This switches to using irq_alloc_desc() directly for subgroup IRQs. We still need to call activate_irq() on these in order to make them requestable, at least up until these get moved in to their own irq domain.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 24 May, 2012 4 commits
-
-
Paul Mundt authored
Now that all of the users have been converted away, kill off the remnants of the old API. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Follows the se7722 change, see there for more information. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This implements a total rewrite of the rather buggy SE7722 FPGA IRQ code, utilizing a linear irq domain as well as the generic irq chip type. While the interaction between the two APIs is a bit clunky (ie, revmap lookup for gc irq_base), they work well enough together that it's easy enough to work with going forward. While we're at it, deal with irq_mask_ack/unmask of the chained IRQ in the demux handler to prevent smc91x screaming about spurious interrupts. There's also some more improvement that can be made to the irqdomain code to create backing irqdescs for the entire linear range in one bang instead of iterating over the number of hwirqs and doing it irq-at-a-time. This is easily dealt with at a later point, though. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
In the interest of getting off of the create_irq() API we can get all of the functionality we're interested in through a linear IRQ domain. Fairly straightforward conversion utilizing a single linear domain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 18 May, 2012 3 commits
-
-
Paul Mundt authored
Switches from create_irq_nr() to irq_alloc_descs(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Switches from create_irq_nr() to irq_alloc_descs(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The generic hardirq layer provides all of the routines that we need these days, so we don't require any of the dynamic IRQ API wrapping, and can call in to irq_alloc_descs() directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 12 May, 2012 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of minor qla and virto fixes plus one major regression fix (oops in all legacy host drivers)." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] virtio_scsi: fix TMF use-after-free [SCSI] fix oops in all legacy host adapters caused by 6f381fa3 [SCSI] qla2xxx: Update version number to 8.04.00.03-k. [SCSI] qla2xxx: Properly check for current state after the fabric-login request. [SCSI] qla2xxx: Proper completion to scsi-ml for scsi status task_set_full and busy. [SCSI] qla2xxx: Block flash access from application when device is initialized for ISP82xx. [SCSI] qla2xxx: Fix reset time out as qla2xxx not ack to reset request.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David S. Miller: 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the entry is dead before returning it to our caller. 2) openvswitch locking and packet validation fixes from Ansis Atteka, Jesse Gross, and Pravin B Shelar. 3) Fix PM resume locking in IGB driver, from Benjamin Poirier. 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor. 5) Revert a bogus network namespace isolation change that was causing regressions on S390 networking devices. 6) If bonding decides to process and handle a LACPDU frame, we shouldn't bump the rx_dropped counter. From Jiri Bohac. 7) Fix mis-calculation of available TX space in r8169 driver when doing TSO, which can lead to crashes and/or hung device. From Julien Ducourthial. 8) SCTP does not validate cached routes properly in all cases, from Nicolas Dichtel. 9) Link status interrupt needs to be handled in ks8851 driver, from Stephen Boyd. 10) Use capable(), not cap_raised(), in connector/userns netlink code. From Eric W. Biederman via Andrew Morton. 11) Fix pktgen OOPS on module unload, from Eric Dumazet. 12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet. 13) Cure division by zero in SFC driver, from Ben Hutchings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ks8851: Update link status during link change interrupt macvtap: restore vlan header on user read vhost-net: fix handle_rx buffer size bonding: don't increase rx_dropped after processing LACPDUs connector/userns: replace netlink uses of cap_raised() with capable() sctp: check cached dst before using it pktgen: fix crash at module unload Revert "net: maintain namespace isolation between vlan and real device" ehea: fix losing of NEQ events when one event occurred early igb: fix rtnl race in PM resume path ipv4: Do not use dead fib_info entries. r8169: fix unsigned int wraparound with TSO sfc: Fix division by zero when using one RX channel and no SR-IOV openvswitch: Validation of IPv6 set port action uses IPv4 header net: compare_ether_addr[_64bits]() has no ordering cdc_ether: Ignore bogus union descriptor for RNDIS devices bnx2x: bug fix when loading after SAN boot e1000: Silence sparse warnings by correcting type igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper fixes from Alasdair G Kergon: "Fix a couple of serious memory leaks in device-mapper thin provisioning and tidy its MODULE_DESCRIPTION. Mitigate occasional reported hangs associated with multipath scsi_dh module loading." * tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton
-
Rafael J. Wysocki authored
Since cpufreq has no official maintainer at the moment, I'm willing to maintain it along some other power management core code I've been maintaining already. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Snitzer authored
If the requested scsi_dh module is already loaded then skip request_module(). Multipath table loads can hang in an unnecessary __request_module. Reported-by: Ben Marzinski <bmarzins@redhat.com> Cc: stable@kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Alasdair G Kergon authored
Remove duplicate copy of string "device-mapper" (DM_NAME) from MODULE_DESCRIPTION. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Fix two places in commit 104655fd ("dm thin: support discards") that didn't use pool->lock to protect against concurrent changes to the prepared_discards list. Without this fix, thin_endio() can race with process_discard(), leading to concurrent list_add()s that result in the processes locking up with an error like the following: WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0() ... list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0). ... Pid: 17205, comm: kworker/u:1 Tainted: G W O 3.4.0-rc3.snitm+ #1 Call Trace: [<ffffffff8103ca1f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8103cb16>] warn_slowpath_fmt+0x46/0x50 [<ffffffffa04f6ce6>] ? bio_detain+0xc6/0x210 [dm_thin_pool] [<ffffffff8124ff3f>] __list_add+0x8f/0xa0 [<ffffffffa04f70d2>] process_discard+0x2a2/0x2d0 [dm_thin_pool] [<ffffffffa04f6a78>] ? remap_and_issue+0x38/0x50 [dm_thin_pool] [<ffffffffa04f7c3b>] process_deferred_bios+0x7b/0x230 [dm_thin_pool] [<ffffffffa04f7df0>] ? process_deferred_bios+0x230/0x230 [dm_thin_pool] [<ffffffffa04f7e42>] do_worker+0x52/0x60 [dm_thin_pool] [<ffffffff81056fa9>] process_one_work+0x129/0x450 [<ffffffff81059b9c>] worker_thread+0x17c/0x3c0 [<ffffffff81059a20>] ? manage_workers+0x120/0x120 [<ffffffff8105eabe>] kthread+0x9e/0xb0 [<ffffffff814ceda4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ea20>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff814ceda0>] ? gs_change+0x13/0x13 ---[ end trace 7e0a523bc5e52692 ]--- Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Fix a significant memory leak inadvertently introduced during simplification of cell_release_singleton() in commit 6f94a4c4 ("dm thin: fix stacked bi_next usage"). A cell's hlist_del() must be accompanied by a mempool_free(). Use __cell_release() to do this, like before. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
- 11 May, 2012 18 commits
-
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull GPIO omap bug fix from Grant Likely. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/omap: fix incorrect initialization of omap_gpio_mod_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull another powerpc irq fix from Benjamin Herrenschmidt: "It looks like my previous fix for the lazy irq masking problem wasn't quite enough. There was another problem related to performance monitor interrupts acting as NMIs leaving the flags in an incorrect state. Here's a fix that finally seems to make perf solid again." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/irq: Fix another case of lazy IRQ state getting out of sync
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull target fix from Nicholas Bellinger: "This patch removes some incorrect legacy code to free se_lun_acl memory in the NodeACL release path that could potentially trigger an OOPS during shutdown once dynamic -> explicit initiator NodeACL conversion has occurred. That said, we've been able to trigger an OOPS in v4.0 code for this special case when the associated MappedLUNs had not also been made explicit based on active TPG LUN layout during the conversion, so it really makes senses to go ahead and drop this extra cruft to avoid any possible issues here. This ends up only effecting iscsi-target module code (it's the only user) and is CC'ed to stable." * '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion
-
Benjamin Herrenschmidt authored
So we have another case of paca->irq_happened getting out of sync with the HW irq state. This can happen when a perfmon interrupt occurs while soft disabled, as it will return to a soft disabled but hard enabled context while leaving a stale PACA_IRQ_HARD_DIS flag set. This patch fixes it, and also adds a test for the condition of those flags being out of sync in arch_local_irq_restore() when CONFIG_TRACE_IRQFLAGS is enabled. This helps catching those gremlins faster (and so far I can't seem see any anymore, so that's good news). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Stephen Boyd authored
If a link change interrupt comes in we just clear the interrupt and continue along without notifying the upper networking layers that the link has changed. Use the mii_check_link() function to update the link status whenever a link change interrupt occurs. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Basil Gor authored
Ethernet vlan header is not on the packet and kept in the skb->vlan_tci when it comes from lower dev. This patch inserts vlan header in user buffer during skb copy on user read. Signed-off-by: Basil Gor <basil.gor@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Basil Gor authored
Take vlan header length into account, when vlan id is stored as vlan_tci. Otherwise tagged packets coming from macvtap will be truncated. Signed-off-by: Basil Gor <basil.gor@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicholas Bellinger authored
This patch removes some potentially problematic legacy code within core_clear_initiator_node_from_tpg() that was originally intended to release left over se_lun_acl setup during dynamic NodeACL+MappedLUN generate when running with TPG demo-mode operation. Since we now only ever expect to allocate and release se_lun_acl from within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and target_fabric_drop_mappedlun() context respectively, this code for demo-mode release is incorrect and needs to be removed. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull a m68knommu fix from Greg Ungerer: "It contains a single fix for including the ColdFire QSPI interface setup code when enabled as a module. This was broken in the consolidation of the ColdFire SoC device tables in the 3.4 merge window." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m
-
Hugh Dickins authored
Why is there less MemFree than there used to be? It perturbed a test, so I've just been bisecting linux-next, and now find the offender went upstream yesterday. Commit 93278814 "mm: fix division by 0 in percpu_pagelist_fraction()" mistakenly initialized percpu_pagelist_fraction to the sysctl's minimum 8, which leaves 1/8th of memory on percpu lists (on each cpu??); but most of us expect it to be left unset at 0 (and it's not then used as a divisor). MemTotal: 8061476kB 8061476kB 8061476kB 8061476kB 8061476kB 8061476kB Repetitive test with percpu_pagelist_fraction 8: MemFree: 6948420kB 6237172kB 6949696kB 6840692kB 6949048kB 6862984kB Same test with percpu_pagelist_fraction back to 0: MemFree: 7945000kB 7944908kB 7948568kB 7949060kB 7948796kB 7948812kB Signed-off-by: Hugh Dickins <hughd@google.com> [ We really should fix the crazy sysctl interface too, but that's a separate thing - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Bohac authored
Since commit 3aba891d, bonding processes LACP frames (802.3ad mode) with bond_handle_frame(). Currently a copy of the skb is made and the original is left to be processed by other rx_handlers and the rest of the network stack by returning RX_HANDLER_ANOTHER. As there is no protocol handler for PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped increased. Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED if bonding has processed the LACP frame. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
In 2009 Philip Reiser notied that a few users of netlink connector interface needed a capability check and added the idiom cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise that netlink was asynchronous. In 2011 Patrick McHardy noticed we were being silly because netlink is synchronous and removed eff_cap from the netlink_skb_params and changed the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN). Looking at those spots with a fresh eye we should be calling capable(CAP_SYS_ADMIN). The only reason I can see for not calling capable is that it once appeared we were not in the same task as the caller which would have made calling capable() impossible. In the initial user_namespace the only difference between between cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets PF_SUPERPRIV if we use the capability. Since we are going to be using root privilege setting PF_SUPERPRIV seems the right thing to do. The motivation for this that patch is that in a child user namespace cap_raised(current_cap(),...) tests your capabilities with respect to that child user namespace not capabilities in the initial user namespace and thus will allow processes that should be unprivielged to use the kernel services that are only protected with cap_raised(current_cap(),..). To fix possible user_namespace issues and to just clean up the code replace cap_raised(current_cap(), CAP_SYS_ADMIN) with capable(CAP_SYS_ADMIN). Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: Andrew G. Morgan <morgan@kernel.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
dst_check() will take care of SA (and obsolete field), hence IPsec rekeying scenario is taken into account. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yaseivch <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit 7d3d43da (net: In unregister_netdevice_notifier unregister the netdevices.) makes pktgen crashing at module unload. [ 296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267 [ 296.820719] lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1 [ 296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254 [ 296.821079] Call Trace: [ 296.821211] [<ffffffff8168a715>] spin_dump+0x8a/0x8f [ 296.821345] [<ffffffff8168a73b>] spin_bug+0x21/0x26 [ 296.821507] [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140 [ 296.821648] [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20 [ 296.821786] [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen] [ 296.821928] [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen] [ 296.822073] [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100 [ 296.822216] [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen] [ 296.822357] [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0 [ 296.822502] [<ffffffff81699652>] system_call_fastpath+0x16/0x1b Hold the pktgen_thread_lock while splicing pktgen_threads, and test pktgen_exiting in pktgen_device_event() to make unload faster. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 8a83a00b. It causes regressions for S390 devices, because it does an unconditional DST drop on SKBs for vlans and the QETH device needs the neighbour entry hung off the DST for certain things on transmit. Arnd can't remember exactly why he even needed this change. Conflicts: drivers/net/macvlan.c net/8021q/vlan_dev.c net/core/dev.c Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
The NEQ interrupt is only triggered when there was no previous pending interrupt. If we request irq handling after an interrupt has occurred, we will never get an interrupt until we call H_RESET_EVENTS. Events seem to be cleared when we first register the NEQ. So, when we requested irq handling right after registering it, a possible race with an interrupt was much less likely. Now, there is a chance we may lose this race and never get any events. The fix here is to poll and acknowledge any events that might have happened right after registering the irq handler. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin Poirier authored
Since the caller (PM resume code) is not the one holding rtnl, when taking the 'else' branch rtnl may be released at any moment, thereby defeating the whole purpose of this code block. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Due to RCU lookups and RCU based release, fib_info objects can be found during lookup which have fi->fib_dead set. We must ignore these entries, otherwise we risk dereferencing the parts of the entry which are being torn down. Reported-by: Yevgen Pronenko <yevgen.pronenko@sonymobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 May, 2012 6 commits
-
-
Linus Torvalds authored
Merge PA-RISC compile fixes from Rolf Eike Beer: "Since commit d66acc39 ("bitops: Optimise get_order()") getorder.h includes log2.h which leads to an include loop on PA-RISC, bringing a bunch of other breakage to light. This patchset fixes the compilation of the current state of 3.4 on HPPA. Unchanged against the first version, just added an Ack by Grant." * emailed from Rolf Eike Beer <eike-kernel@sf-tec.de>: (5 patches) parisc: move definition of PAGE0 to asm/page.h parisc: add missing include of asm/page.h to asm/pgtable.h parisc: drop include of asm/pdc.h from asm/hardware.h parisc: add missing forward declarations in asm/hardware.h parisc: add missing includes in asm/spinlock.h
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton. * emailed from Andrew Morton <akpm@linux-foundation.org>: (8 patches) MAINTAINERS: add maintainer for LED subsystem mm: nobootmem: fix sign extend problem in __free_pages_memory() drivers/leds: correct __devexit annotations memcg: free spare array to avoid memory leak namespaces, pid_ns: fix leakage on fork() failure hugetlb: prevent BUG_ON in hugetlb_fault() -> hugetlb_cow() mm: fix division by 0 in percpu_pagelist_fraction() proc/pid/pagemap: correctly report non-present ptes and holes between vmas
-
Rolf Eike Beer authored
This was defined in asm/pdc.h which needs to include asm/page.h for __PAGE_OFFSET. This leads to an include loop so that page.h eventually will include pdc.h again. While this is no problem because of header guards, it is a problem because some symbols may be undefined. Such an error is this: In file included from include/linux/bitops.h:35:0, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/processor.h:16, from arch/parisc/include/asm/spinlock.h:6, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from include/linux/sysfs.h:20, from include/linux/kobject.h:21, from include/linux/device.h:17, from include/linux/eisa.h:5, from arch/parisc/kernel/pci.c:11: arch/parisc/include/asm/bitops.h: In function ‘set_bit’: arch/parisc/include/asm/bitops.h:82:2: error: implicit declaration of function ‘_atomic_spin_lock_irqsave’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/bitops.h:84:2: error: implicit declaration of function ‘_atomic_spin_unlock_irqrestore’ [-Werror=implicit-function-declaration] Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rolf Eike Beer authored
Fixes these errors: In file included from arch/parisc/include/asm/io.h:5:0, from include/linux/io.h:22, from include/linux/pci.h:54, from arch/parisc/kernel/setup.c:35: arch/parisc/include/asm/pgtable.h:92:6: warning: "PAGE_SHIFT" is not defined [-Wundef] arch/parisc/include/asm/pgtable.h:92:6: warning: "PAGE_SHIFT" is not defined [-Wundef] arch/parisc/include/asm/pgtable.h:92:6: warning: "BITS_PER_PTE_ENTRY" is not defined [-Wundef] Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rolf Eike Beer authored
It seems none of the symbols defined by pdc.h is needed, but it introduces an include loop causing compile errors: In file included from arch/parisc/include/asm/spinlock.h:4:0, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from arch/parisc/include/asm/bitops.h:56, from include/linux/bitops.h:35, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/hardware.h:5, from arch/parisc/kernel/hardware.c:30: arch/parisc/include/asm/processor.h:74:16: error: field ‘cpu_type’ has incomplete type arch/parisc/include/asm/processor.h:77:20: error: field ‘model’ has incomplete type arch/parisc/include/asm/processor.h: In function ‘parisc_requires_coherency’: arch/parisc/include/asm/processor.h:349:36: error: ‘mako’ undeclared (first use in this function) arch/parisc/include/asm/processor.h:349:36: note: each undeclared identifier is reported only once for each function it appears in arch/parisc/include/asm/processor.h:350:30: error: ‘mako2’ undeclared (first use in this function) Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Acked-by: Grant Grundler <grantgrundler@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rolf Eike Beer authored
Fixes this warnings: In file included from arch/parisc/include/asm/processor.h:15:0, from arch/parisc/include/asm/spinlock.h:4, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from arch/parisc/include/asm/bitops.h:11, from include/linux/bitops.h:22, from include/linux/kernel.h:19, from include/linux/sched.h:55, from arch/parisc/kernel/asm-offsets.c:31: arch/parisc/include/asm/hardware.h:106:10: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] arch/parisc/include/asm/hardware.h:106:10: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] arch/parisc/include/asm/hardware.h:116:59: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] arch/parisc/include/asm/hardware.h:118:47: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] arch/parisc/include/asm/hardware.h:119:57: warning: ‘struct hardware_path’ declared inside parameter list [enabled by default] Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-