Pull NVMe fix from Christoph:

"nvme fix for Linux 6.2

 - fix visibility of the CMB sysfs attributes (Keith Busch)"

* tag 'nvme-6.2-2022-02-17' of git://git.infradead.org/nvme:
  nvme-pci: refresh visible attrs for cmb attributes

The sysfs group containing the cmb attributes is registered before the
driver knows if they need to be visible or not. Update the group when
cmb attributes are known to exist so the visibility setting is correct.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217037
Fixes: 86adbf0c ("nvme: simplify transport specific device attribute handling")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - always return an ERR_PTR from nvme_pci_alloc_dev (Irvin Cote)
 - add bogus ID quirk for ADATA SX6000PNP (Daniel Wagner)
 - set the DMA mask earlier (Christoph Hellwig)"

* tag 'nvme-6.2-2023-02-15' of git://git.infradead.org/nvme:
  nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
  nvme-pci: set the DMA mask earlier
  nvme-pci: add bogus ID quirk for ADATA SX6000PNP

Don't mix NULL and ERR_PTR returns.

Fixes: 2e87570b ("nvme-pci: factor out a nvme_pci_alloc_dev helper")
Signed-off-by: Irvin Cote <irvin.cote@insa-lyon.fr>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Set the DMA mask before calling dma_addressing_limited, which depends on it.

Note that this stop checking the return value of dma_set_mask_and_coherent
as this function can only fail for masks < 32-bit.

Fixes: 3f30a79c ("nvme-pci: set constant paramters in nvme_pci_alloc_ctrl")
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Michael Kelley <mikelley@microsoft.com>

Yet another device which needs a quirk:

 nvme nvme1: globally duplicate IDs for nsid 1
 nvme nvme1: VID:DID 10ec:5763 model:ADATA SX6000PNP firmware:V9002s94

Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1207827Reported-by: Gustavo Freitas <freitasmgustavo@gmail.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fix from Christoph:

"nvme fixes for Linux 6.2

 - fix a static checker warning for a variable introduces in the last
   pull request (Tom Rix)"

* tag 'nvme-6.2-2023-02-09' of git://git.infradead.org/nvme:
  nvme-auth: mark nvme_auth_wq static

Fix a smatch report for the newly added nvme_auth_wq.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pul NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel)
 - clear queue pointers on tag_set initialization failure
   (Maurizio Lombardi)
 - use workqueue dedicated to authentication (Shin'ichiro Kawasaki)"

* tag 'nvme-6.2-2023-02-02' of git://git.infradead.org/nvme:
  nvme-auth: use workqueue dedicated to authentication
  nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
  nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
  nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association

We source root cgroup stats from the system-wide stats, see blkcg_print_stat
and blkcg_rstat_flush, so don't update io state for root cgroup.

Fixes blkg leak issue introduced in commit 3b8cc629 ("blk-cgroup: Optimize blkcg_rstat_flush()")
which starts to grab blkg's reference when adding iostat_cpu into percpu
blkcg list, but this state won't be consumed by blkcg_rstat_flush() where
the blkg reference is dropped.
Tested-by: Bart van Assche <bvanassche@acm.org>
Reported-by: Bart van Assche <bvanassche@acm.org>
Fixes: 3b8cc629 ("blk-cgroup: Optimize blkcg_rstat_flush()")
Cc: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230202021804.278582-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

NVMe In-Band authentication uses two kinds of works: chap->auth_work and
ctrl->dhchap_auth_work. The latter work flushes or cancels the former
work. However, the both works are queued to the same workqueue nvme-wq.
It results in the lockdep WARNING as follows:

 WARNING: possible recursive locking detected
 6.2.0-rc4+ #1 Not tainted
 --------------------------------------------
 kworker/u16:7/69 is trying to acquire lock:
 ffff902d52e65548 ((wq_completion)nvme-wq){+.+.}-{0:0}, at: start_flush_work+0x2c5/0x380

 but task is already holding lock:
 ffff902d52e65548 ((wq_completion)nvme-wq){+.+.}-{0:0}, at: process_one_work+0x210/0x410

To avoid the WARNING, introduce a new workqueue nvme-auth-wq dedicated
to chap->auth_work.
Reported-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/linux-nvme/20230130110802.paafkiipmitwtnwr@carbon.lan/
Fixes: f50fff73 ("nvme: implement In-Band authentication")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In nvme_alloc_io_tag_set(), the connect_q pointer should be set to NULL
in case of error to avoid potential invalid pointer dereferences.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If nvme_alloc_admin_tag_set() fails, the admin_q and fabrics_q pointers
are left with an invalid, non-NULL value. Other functions may then check
the pointers and dereference them, e.g. in

  nvme_probe() -> out_disable: -> nvme_dev_remove_admin().

Fix the bug by setting admin_q and fabrics_q to NULL in case of error.

Also use the set variable to free the tag_set as ctrl->admin_tagset isn't
initialized yet.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

As part of nvmet_fc_ls_create_association there is a case where
nvmet_fc_alloc_target_queue fails right after a new association with an
admin queue is created. In this case, no one releases the get taken in
nvmet_fc_alloc_target_assoc.  This fix is adding the missing put.
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Commit 2b3f056f moved a blk_put_queue() call from
blk_mq_destroy_queue() into its callers. Reflect this change in the
documentation block above blk_mq_destroy_queue().

Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 2b3f056f ("blk-mq: move the call to blk_put_queue out of blk_mq_destroy_queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230130211233.831613-1-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

When validating drafted SPDK ublk target, in a case that
assigning large queue depth to multiqueue ublk device,
ublk target would run into a weird incorrect state. During
rounds of review and debug, An overflow bug was found
in ublk driver.

In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means
each ublk queue depth can be set as large as 4096. But
when setting qd for a ublk device,
sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io)
will be larger than 65535 if qd is larger than 2728.
Then queue_size is overflowed, and ublk_get_queue()
references a wrong pointer position. The wrong content of
ublk_queue elements will lead to out-of-bounds memory
access.

Extend queue_size in ublk_device as "unsigned int".
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Fixes: 71f28f31 ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230131070552.115067-1-xiaodong.liu@intel.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

After commit 64dc8c73 ("block, bfq: fix possible uaf for 'bfqq->bic'"),
bic->bfqq will be accessed in bic_set_bfqq(), however, in some context
bic->bfqq will be freed, and bic_set_bfqq() is called with the freed
bic->bfqq.

Fix the problem by always freeing bfqq after bic_set_bfqq().

Fixes: 64dc8c73 ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230130014136.591038-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - flush initial scan_work for async probe (Keith Busch)
 - fix passthrough csi check (Keith Busch)
 - fix nvme-fc initialization order (Ross Lagerwall)"

* tag 'nvme-6.2-2023-01-26' of git://git.infradead.org/nvme:
  nvme: fix passthrough csi check
  nvme-pci: flush initial scan_work for async probe
  nvme-fc: fix initialization order

The 'ublk_chr_class' is needed when deleting ublk char devices in
ublk_exit(), so move it after devices(idle) are removed.

Fixes the following warning reported by Harris, James R:

[  859.178950] sysfs group 'power' not found for kobject 'ublkc0'
[  859.178962] WARNING: CPU: 3 PID: 1109 at fs/sysfs/group.c:278 sysfs_remove_group+0x9c/0xb0
Reported-by: "Harris, James R" <james.r.harris@intel.com>
Fixes: 71f28f31 ("ublk_drv: add io_uring based userspace block driver")
Link: https://lore.kernel.org/linux-block/Y9JlFmSgDl3+zy3N@T590/T/#tSigned-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Link: https://lore.kernel.org/r/20230126115346.263344-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The namespace head saves the Command Set Indicator enum, so use that
instead of the Command Set Selected. The two values are not the same.

Fixes: 831ed60c ("nvme: also return I/O command effects from nvme_command_effects")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The nvme device may have a namespace with the root partition, so make
sure we've completed scanning before returning from the async probe.

Fixes: eac3ef26 ("nvme-pci: split the initial probe from the rest path")
Reported-by: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

ctrl->ops is used by nvme_alloc_admin_tag_set() but set by
nvme_init_ctrl() so reorder the calls to avoid a NULL pointer
dereference.

Fixes: 6dfba1c0 ("nvme-fc: use the tagset alloc/free helpers")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - fix  controller shutdown regression in nvme-apple (Janne Grunau)
 - fix a polling on timeout regression in nvme-pci (Keith Busch)"

* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
  nvme-pci: fix timeout request state check
  nvme-apple: only reset the controller when RTKit is running
  nvme-apple: reset controller during shutdown

Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.

This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.

Fixes: bf392a5d ("nvme-pci: Remove tag from process cq")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This is a functional revert of c76b8308 ("nvme-apple: fix controller
shutdown in apple_nvme_disable").

The commit broke suspend/resume since apple_nvme_reset_work() tries to
disable the controller on resume. This does not work for the apple NVMe
controller since register access only works while the co-processor
firmware is running.

Disabling the NVMe controller in the shutdown path is also required
for shutting the co-processor down. The original code was appropriate
for this hardware. Add a comment to prevent a similar breaking changes
in the future.

Fixes: c76b8308 ("nvme-apple: fix controller shutdown in apple_nvme_disable")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/all/20230110174745.GA3576@jannau.net/Signed-off-by: Janne Grunau <j@jannau.net>
[hch: updated with a more descriptive comment from Hector Martin]
Signed-off-by: Christoph Hellwig <hch@lst.de>

When there are no read queues read requests will be assigned a
default queue on allocation. However, blk_mq_get_cached_request() is not
prepared for that and will fail all attempts to grab read requests from
the cache. Worst case it doubles the number of requests allocated,
roughly half of which will be returned by blk_mq_free_plug_rqs().

It only affects batched allocations and so is io_uring specific.
For reference, QD8 t/io_uring benchmark improves by 20-35%.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/80d4511011d7d4751b4cf6375c4e38f237d935e3.1673955390.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We need to pass 'end - 1' to ida_alloc_max after switch from
ida_simple_get to ida_alloc_max.

Otherwise smatch warns.

drivers/block/rnbd/rnbd-clt.c:1460 init_dev() error: Calling ida_alloc_max() with a 'max' argument which is a power of 2. -1 missing?

Fixes: 24afc15d ("block/rnbd: Remove a useless mutex")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20221230010926.32243-1-guoqing.jiang@linux.devSigned-off-by: Jens Axboe <axboe@kernel.dk>

If the policy defines pd_online_fn(), it should be called after
pd_init_fn(), like blkg_create().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230103112833.2013432-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The revert of the removal of this driver happened after we fixed up
the split limits for NOWAIT issue, hence it got missed. Ensure that
we check for a NULL bio after splitting, in case it should be retried.

Marking this as fixing both commits, so that stable backport will do
this correctly.

Cc: stable@vger.kernel.org
Fixes: 9cea62b2 ("block: don't allow splitting of a REQ_NOWAIT bio")
Fixes: 4b83e99e ("Revert "pktcdvd: remove driver."")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however,
during code review, we found that bfq_pd_free() update 'bfqg->ref'
without holding the lock, which is problematic:

1) bfq_pd_free() triggered by removing cgroup is called asynchronously;
2) bfqq will grab bfqg reference, and exit bfqq will drop the reference,
which can concurrent with 1).

Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already
be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull MD fix from Song:

"It fixes an issue introduced by recent code refactor."

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: fix incorrect declaration about claim_rdev in md_import_device

Commit fb541ca4 ("md: remove lock_bdev / unlock_bdev") removes
wrappers for blkdev_get/blkdev_put. However, the uninitialized local
static variable of pointer type 'claim_rdev' in md_import_device()
is NULL, which leads to the following warning call trace:

  WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150
  CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69
  ..
  RIP: 0010:bd_prepare_to_claim+0x131/0x150
  ..
  Call Trace:
   <TASK>
   ? _raw_spin_unlock+0x15/0x30
   ? iput+0x6a/0x220
   blkdev_get_by_dev.part.0+0x4b/0x300
   md_import_device+0x126/0x1d0
   new_dev_store+0x184/0x240
   md_attr_store+0x80/0xf0
   kernfs_fop_write_iter+0x128/0x1c0
   vfs_write+0x2be/0x3c0
   ksys_write+0x5f/0xe0
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

It turns out the md device cannot be used:

  md: could not open device unknown-block(259,0).
  md: md127 stopped.

Fix the issue by declaring the local static variable of struct type
and passing the pointer of the variable to blkdev_get_by_dev().

Fixes: fb541ca4 ("md: remove lock_bdev / unlock_bdev")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - Identify quirks for Apple controllers (Hector Martin)
 - fix error handling in nvme_pci_enable (Tong Zhang)
 - refuse unprivileged passthrough on partitions (Christoph Hellwig)
 - fix MAINTAINERS to not match nvmem subsystem headers (Russell King)"

* tag 'nvme-6.2-2023-01-12' of git://git.infradead.org/nvme:
  MAINTAINERS: stop nvme matching for nvmem files
  nvme: don't allow unprivileged passthrough on partitions
  nvme: replace the "bool vec" arguments with flags in the ioctl path
  nvme: remove __nvme_ioctl
  nvme-pci: fix error handling in nvme_pci_enable()
  nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers
  nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression

The nvme patterns detect all include files starting with nvme, which
also picks up the nvmem subsystem header files. Fix this by using
a more specific pattern.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[hch: switched to a purely inclusive pattern instead of excluding nvmem*]
Signed-off-by: Christoph Hellwig <hch@lst.de>

Passthrough commands can always access the entire device, and thus
submitting them on partitions is an privelege escalation.

In hindsight we should have never allowed any passthrough commands on
partitions, but it's probably too late to change that decision now.

Fixes: e4fbcf32 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

To prepare for passing down more information, replace the boolean
vec argument with a more extensible flags one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Open code __nvme_ioctl in the two callers to make future changes that
pass down additional paramters in the ioctl path easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

There are two issues in nvme_pci_enable():

 1) If pci_alloc_irq_vectors() fails, device is left enabled. Fix this by
    adding a goto disable statement.
 2) nvme_pci_configure_admin_queue could return -ENODEV, in this case,
    we will need to free IRQ properly.  Otherwise the following warning
    could be triggered:

[    5.286752] WARNING: CPU: 0 PID: 33 at kernel/irq/irqdomain.c:253 irq_domain_remove+0x12d/0x140
[    5.290547] Call Trace:
[    5.290626]  <TASK>
[    5.290695]  msi_remove_device_irq_domain+0xc9/0xf0
[    5.290843]  msi_device_data_release+0x15/0x80
[    5.290978]  release_nodes+0x58/0x90
[    5.293788] WARNING: CPU: 0 PID: 33 at kernel/irq/msi.c:276 msi_device_data_release+0x76/0x80
[    5.297573] Call Trace:
[    5.297651]  <TASK>
[    5.297719]  release_nodes+0x58/0x90
[    5.297831]  devres_release_all+0xef/0x140
[    5.298339]  device_unbind_cleanup+0x11/0xc0
[    5.298479]  really_probe+0x296/0x320

Fixes: a6ee7f19 ("nvme-pci: call nvme_pci_configure_admin_queue from nvme_pci_enable")
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This mirrors the quirk added to Apple Silicon controllers in apple.c.
These controllers do not support the Active NS ID List command and
behave identically to the SoC version judging by existing user
reports/syslogs, so will need the same fix. This quirk reverts
back to NVMe 1.0 behavior and disables the broken commands.

Fixes: 811f4de0 ("nvme: avoid fallback to sequential scan due to transient issues")
Signed-off-by: Hector Martin <marcan@marcan.st>
Tested-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>