Pull SCSI fixes from James Bottomley:
 "Twelve patches mostly small but obvious fixes or cosmetic but small
  updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix Nport ID display value
  scsi: qla2xxx: Fix N2N link up fail
  scsi: qla2xxx: Fix N2N link reset
  scsi: qla2xxx: Optimize NPIV tear down process
  scsi: qla2xxx: Fix stale mem access on driver unload
  scsi: qla2xxx: Fix unbound sleep in fcport delete path.
  scsi: qla2xxx: Silence fwdump template message
  scsi: hisi_sas: Make three functions static
  scsi: megaraid: disable device when probe failed after enabled device
  scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
  scsi: qedf: Remove always false 'tmp_prio < 0' statement
  scsi: ufs: skip shutdown if hba is not powered
  scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF

This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space.  And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.

I really wanted to do this during the merge window, but didn't have
time.  The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.

It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned.  But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.

* branch 'readdir':
  Make filldir[64]() verify the directory entry filename is valid
  Convert filldir[64]() from __put_user() to unsafe_put_user()

This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption.  It's really more
"protect user space from bad behavior" as pointed out by Jann.  But
since Eric Biederman looked up the POSIX wording, here it is for context:

 "From readdir:

   The readdir() function shall return a pointer to a structure
   representing the directory entry at the current position in the
   directory stream specified by the argument dirp, and position the
   directory stream at the next entry. It shall return a null pointer
   upon reaching the end of the directory stream. The structure dirent
   defined in the <dirent.h> header describes a directory entry.

  From definitions:

   3.129 Directory Entry (or Link)

   An object that associates a filename with a file. Several directory
   entries can associate names with the same file.

  ...

   3.169 Filename

   A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
   characters composing the name may be selected from the set of all
   character values excluding the slash character and the null byte. The
   filenames dot and dot-dot have special meaning. A filename is
   sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.

Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.

Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.

So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface.  Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.

This also makes the dirent name copy use unsafe_put_user() with a couple
of macros.  We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.

Note that this doesn't bother with the legacy cases.  Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.

 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
    Dumazet.

 3) txq null deref in mac80211, from Miaoqing Pan.

 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.

 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.

 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.

 7) Various xgmac fixes in stmmac driver from Jose Abreu.

 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
    Michal Kubecek.

 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.

10) Fix sleep while atomic in sja1105, from Vladimir Oltean.

11) Suspend/resume deadlock in stmmac, from Thierry Reding.

12) Various UDP GSO fixes from Josh Hunt.

13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
    Dumazet.

14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.

15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  selftests/net: add nettest to .gitignore
  net: qlogic: Fix memory leak in ql_alloc_large_buffers
  nfc: fix memory leak in llcp_sock_bind()
  sch_dsmark: fix potential NULL deref in dsmark_init()
  net: phy: at803x: use operating parameters from PHY-specific status
  net: phy: extract pause mode
  net: phy: extract link partner advertisement reading
  net: phy: fix write to mii-ctrl1000 register
  ipv6: Handle missing host route in __ipv6_ifa_notify
  net: phy: allow for reset line to be tied to a sleepy GPIO controller
  net: ipv4: avoid mixed n_redirects and rate_tokens usage
  r8152: Set macpassthru in reset_resume callback
  cxgb4:Fix out-of-bounds MSI-X info array access
  Revert "ipv6: Handle race in addrconf_dad_work"
  net: make sock_prot_memory_pressure() return "const char *"
  rxrpc: Fix rxrpc_recvmsg tracepoint
  qmi_wwan: add support for Cinterion CLS8 devices
  tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
  lib: textsearch: fix escapes in example code
  udp: only do GSO if # of segs > 1
  ...

Pull s390 fixes from Vasily Gorbik:

 - defconfig updates

 - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
   constraint for function arguments. Two kvm changes acked-by Christian
   Borntraeger.

 - Fix -Wunused-but-set-variable warnings in mm code.

 - Avoid a constant misuse in qdio.

 - Handle a case when cpumf is temporarily unavailable.

* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390: mark __insn32_query() as __always_inline
  KVM: s390: fix __insn32_query() inline assembly
  s390: update defconfigs
  s390/pci: mark function(s) __always_inline
  s390/mm: mark function(s) __always_inline
  s390/jump_label: mark function(s) __always_inline
  s390/cpu_mf: mark function(s) __always_inline
  s390/atomic,bitops: mark function(s) __always_inline
  s390/mm: fix -Wunused-but-set-variable warnings
  s390: mark __cpacf_query() as __always_inline
  s390/qdio: clarify size of the QIB parm area
  s390/cpumf: Fix indentation in sampling device driver
  s390/cpumsf: Check for CPU Measurement sampling
  s390/cpumf: Use consistant debug print format

__insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.

Fix and simplify the code and just use a "memory" clobber.

Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

nettest is missing from gitignore.

Fixes: acda655f ("selftests: Add nettest")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.

Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysbot reported a memory leak after a bind() has failed.

While we are at it, abort the operation if kmemdup() has failed.

BUG: memory leak
unreferenced object 0xffff888105d83ec0 (size 32):
  comm "syz-executor067", pid 7207, jiffies 4294956228 (age 19.430s)
  hex dump (first 32 bytes):
    00 69 6c 65 20 72 65 61 64 00 6e 65 74 3a 5b 34  .ile read.net:[4
    30 32 36 35 33 33 30 39 37 5d 00 00 00 00 00 00  026533097]......
  backtrace:
    [<0000000036bac473>] kmemleak_alloc_recursive /./include/linux/kmemleak.h:43 [inline]
    [<0000000036bac473>] slab_post_alloc_hook /mm/slab.h:522 [inline]
    [<0000000036bac473>] slab_alloc /mm/slab.c:3319 [inline]
    [<0000000036bac473>] __do_kmalloc /mm/slab.c:3653 [inline]
    [<0000000036bac473>] __kmalloc_track_caller+0x169/0x2d0 /mm/slab.c:3670
    [<000000000cd39d07>] kmemdup+0x27/0x60 /mm/util.c:120
    [<000000008e57e5fc>] kmemdup /./include/linux/string.h:432 [inline]
    [<000000008e57e5fc>] llcp_sock_bind+0x1b3/0x230 /net/nfc/llcp_sock.c:107
    [<000000009cb0b5d3>] __sys_bind+0x11c/0x140 /net/socket.c:1647
    [<00000000492c3bbc>] __do_sys_bind /net/socket.c:1658 [inline]
    [<00000000492c3bbc>] __se_sys_bind /net/socket.c:1656 [inline]
    [<00000000492c3bbc>] __x64_sys_bind+0x1e/0x30 /net/socket.c:1656
    [<0000000008704b2a>] do_syscall_64+0x76/0x1a0 /arch/x86/entry/common.c:296
    [<000000009f4c57a4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 30cc4587 ("NFC: Move LLCP code to the NFC top level diirectory")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure TCA_DSMARK_INDICES was provided by the user.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline]
RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline]
RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339
Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca
RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09
RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004
RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159
R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940
R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000
FS:  0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237
 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440369

Fixes: 758cc43c ("[PKT_SCHED]: Fix dsmark to apply changes consistent")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
Fix regression with AR8035 speed downgrade

The following series attempts to address an issue spotted by tinywrkb
with the AR8035 on the Cubox-i2 in a situation where the PHY downgrades
the negotiated link.

This is version 2, not much has changed other than rebasing on the
current net tree.  Changes have happend to patch 2 due to conflicts,
so I dropped Andrew's reviewed-by.  Minor context changes to patch 4
which I don't consider important enough to warrant dropping the
reviewed-by.

Before commit 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in
genphy_read_status"), we would read not only the link partner's
advertisement, but also our own advertisement from the PHY registers,
and use both to derive the PHYs current link mode.  This works when the
AR8035 downgrades the speed, because it appears that the AR8035 clears
link mode bits in the advertisement registers as part of the downgrade.

Commentary: what is not yet known is whether the AR8035 restores the
            advertisement register when the link goes down to the
	    previous state.

However, since the above referenced commit, we no longer use the PHYs
advertisement registers, instead converting the link partner's
advertisement to the ethtool link mode array, and combine that with
phylib's cached version of our advertisement - which is not updated on
speed downgrade.

This results in phylib disagreeing with the actual operating mode of
the PHY.

Commentary: I wonder how many more PHY drivers are broken by this
	    commit, but have yet to be discovered.

The obvious way to address this would be to disable the downgrade
feature, and indeed this does fix the problem in tinywrkb's case - his
link partner instead downgrades the speed by reducing its
advertisement, resulting in phylib correctly evaluating a slower speed.

However, it has a serious drawback - the gigabit control register (MII
register 9) appears to become read only.  It seems the only way to
update the register is to re-enable the downgrade feature, reset the
PHY, changing register 9, disable the downgrade feature, and reset the
PHY again.

This series attempts to address the problem using a different approach,
similar to the approach taken with Marvell PHYs.  The AR8031, AR8033
and AR8035 have a PHY-Specific Status register which reports the
actual operating mode of the PHY - both speed and duplex.  This
register correctly reports the operating mode irrespective of whether
autoneg is enabled or not.  We use this register to fill in phylib's
speed and duplex parameters.

In detail:

Patch 1 fixes a bug where writing to register 9 does not update
phylib's advertisement mask in the same way that writing register 4
does; this looks like an omission from when gigabit PHY support came
into being.

Patch 2 seperates the generic phylib code which reads the link partners
advertisement from the PHY, so that we can re-use this in the Atheros
PHY driver.

Patch 3 seperates the generic phylib pause mode; phylib provides no
help for MAC drivers to ascertain the negotiated pause mode, it merely
copies the link partner's pause mode bits into its own variables.

Commentary: Both the aforementioned Atheros PHYs and Marvell PHYs
            provide the resolved pause modes in terms of whether
	    we should transmit pause frames, or whether we should
	    allow reception of pause frames.  Surely the resolution
	    of this should be in phylib?

Patch 4 provides the Atheros PHY driver with a private "read_status"
implementation that fills in phylib's speed and duplex settings
depending on the PHY-Specific status register.  This ensures that
phylib and the MAC driver match the operating mode that the PHY has
decided to use.  Since the register also gives us MDIX status, we
can trivially fill that status in as well.

Note that, although the bits mentioned in this patch for this register
match those in th Marvell PHY driver, and it is located at the same
address, the meaning of other register bits varies between the PHYs.
Therefore, I do not feel that it would be appropriate to make this some
kind of generic function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Read the PHY-specific status register for the current operating mode
(speed and duplex) of the PHY.  This register reflects the actual
mode that the PHY has resolved depending on either the advertisements
of autoneg is enabled, or the forced mode if autoneg is disabled.

This ensures that phylib's software state always tracks the hardware
state.

It seems both AR8033 (which uses the AR8031 ID) and AR8035 support
this status register.  AR8030 is not known at the present time.

This patch depends on "net: phy: extract pause mode" and "net: phy:
extract link partner advertisement reading".
Reported-by: tinywrkb <tinywrkb@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: tinywrkb <tinywrkb@gmail.com>
Fixes: 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extract the update of phylib's software pause mode state from
genphy_read_status(), so that we can re-use this functionality with
PHYs that have alternative ways to read the negotiation results.
Tested-by: tinywrkb <tinywrkb@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move reading the link partner advertisement out of genphy_read_status()
into its own separate function.  This will allow re-use of this code by
PHY drivers that are able to read the resolved status from the PHY.
Tested-by: tinywrkb <tinywrkb@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When userspace writes to the MII_ADVERTISE register, we update phylib's
advertising mask and trigger a renegotiation.  However, writing to the
MII_CTRL1000 register, which contains the gigabit advertisement, does
neither.  This can lead to phylib's copy of the advertisement becoming
de-synced with the values in the PHY register set, which can result in
incorrect negotiation resolution.

Fixes: 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rajendra reported a kernel panic when a link was taken down:

    [ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
    [ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290

    <snip>

    [ 6870.570501] Call Trace:
    [ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40
    [ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0
    [ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260
    [ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430
    [ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
    [ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430
    [ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490
    [ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430
    [ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0
    [ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
    [ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60
    [ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70
    [ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0

addrconf_dad_work is kicked to be scheduled when a device is brought
up. There is a race between addrcond_dad_work getting scheduled and
taking the rtnl lock and a process taking the link down (under rtnl).
The latter removes the host route from the inet6_addr as part of
addrconf_ifdown which is run for NETDEV_DOWN. The former attempts
to use the host route in __ipv6_ifa_notify. If the down event removes
the host route due to the race to the rtnl, then the BUG listed above
occurs.

Since the DAD sequence can not be aborted, add a check for the missing
host route in __ipv6_ifa_notify. The only way this should happen is due
to the previously mentioned race. The host route is created when the
address is added to an interface; it is only removed on a down event
where the address is kept. Add a warning if the host route is missing
AND the device is up; this is a situation that should never happen.

Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mdio_device_reset() makes use of the atomic-pretending API flavor for
handling the PHY reset GPIO line.

I found no hint that mdio_device_reset() is called from atomic context
and indeed it uses usleep_range() since long time, so I would assume that
it is OK to sleep there.

This patch switch to gpiod_set_value_cansleep() in mdio_device_reset().
This is relevant if e.g. the PHY reset line is tied to a I2C GPIO
controller.

This has been tested on a ZynqMP board running an upstream 4.19 kernel and
then hand-ported on current kernel tree.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit c09551c6 ("net: ipv4: use a dedicated counter
for icmp_v4 redirect packets") we use 'n_redirects' to account
for redirect packets, but we still use 'rate_tokens' to compute
the redirect packets exponential backoff.

If the device sent to the relevant peer any ICMP error packet
after sending a redirect, it will also update 'rate_token' according
to the leaking bucket schema; typically 'rate_token' will raise
above BITS_PER_LONG and the redirect packets backoff algorithm
will produce undefined behavior.

Fix the issue using 'n_redirects' to compute the exponential backoff
in ip_rt_send_redirect().

Note that we still clear rate_tokens after a redirect silence period,
to avoid changing an established behaviour.

The root cause predates git history; before the mentioned commit in
the critical scenario, the kernel stopped sending redirects, after
the mentioned commit the behavior more randomic.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Fixes: c09551c6 ("net: ipv4: use a dedicated counter for icmp_v4 redirect packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152 may fail to establish network connection after resume from system
suspend.

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When fetching free MSI-X vectors for ULDs, check for the error code
before accessing MSI-X info array. Otherwise, an out-of-bounds access is
attempted, which results in kernel panic.

Fixes: 94cdb8bb ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit a3ce2a21.

Eric reported tests failings with commit. After digging into it,
the bottom line is that the DAD sequence is not to be messed with.
There are too many cases that are expected to proceed regardless
of whether a device is up.

Revert the patch and I will send a different solution for the
problem Rajendra reported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function returns string literals which are "const char *".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the rxrpc_recvmsg tracepoint to handle being called with a NULL call
parameter.

Fixes: a25e21f0 ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for Cinterion CLS8 devices.
Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets.

T:  Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b0 Rev= 3.18
S:  Manufacturer=GEMALTO
S:  Product=USB Modem
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS fixes from Paul Burton:

 - Build fixes for Cavium Octeon & PMC-Sierra MSP systems, as well as
   all pre-MIPSr6 configurations built with binutils < 2.25.

 - Boot fixes for 64-bit Loongson systems & SGI IP28 systems.

 - Wire up the new clone3 syscall.

 - Clean ups for a few build-time warnings.

* tag 'mips_fixes_5.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: fw/arc: Remove unused addr variable
  MIPS: pmcs-msp71xx: Remove unused addr variable
  MIPS: pmcs-msp71xx: Add missing MAX_PROM_MEM definition
  mips: Loongson: Fix the link time qualifier of 'serial_exit()'
  MIPS: init: Prevent adding memory before PHYS_OFFSET
  MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem start
  MIPS: VDSO: Fix build for binutils < 2.25
  MIPS: VDSO: Remove unused gettimeofday.c
  MIPS: Wire up clone3 syscall
  MIPS: octeon: Include required header; fix octeon ethernet build
  MIPS: cpu-bugs64: Mark inline functions as __always_inline
  MIPS: dts: ar9331: fix interrupt-controller size
  MIPS: Loongson64: Fix boot failure after dropping boot_mem_map

Pull RISC-V fixes from Paul Walmsley:

 - Ensure that exclusive-load reservations are terminated after system
   call or exception handling. This primarily affects QEMU, which does
   not expire load reservations.

 - Fix an issue primarily affecting RV32 platforms that can cause the DT
   header to be corrupted, causing boot failures.

* tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix memblock reservation for device tree blob
  RISC-V: Clear load reservations while restoring hart contexts

Pull DeviceTree fixes from Rob Herring:
 "Fix several 'dt_binding_check' build failures"

* tag 'devicetree-fixes-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: phy: lantiq: Fix Property Name
  dt-bindings: iio: ad7192: Fix DTC warning in the example
  dt-bindings: iio: ad7192: Fix Regulator Properties
  dt-bindings: media: rc: Fix redundant string
  dt-bindings: dsp: Fix fsl,dsp example

The addr variable in prom_free_prom_memory() has been unused since
commit 0df10076 ("MIPS: fw: Record prom memory"), leading to a
compiler warning:

  arch/mips/fw/arc/memory.c:163:16:
    warning: unused variable 'addr' [-Wunused-variable]

Fix this by removing the unused variable.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 0df10076 ("MIPS: fw: Record prom memory")
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org

Pull KVM fixes from Paolo Bonzini:
 "ARM and x86 bugfixes of all kinds.

  The most visible one is that migrating a nested hypervisor has always
  been busted on Broadwell and newer processors, and that has finally
  been fixed"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
  KVM: x86: omit "impossible" pmu MSRs from MSR list
  KVM: nVMX: Fix consistency check on injected exception error code
  KVM: x86: omit absent pmu MSRs from MSR list
  selftests: kvm: Fix libkvm build error
  kvm: vmx: Limit guest PMCs to those supported on the host
  kvm: x86, powerpc: do not allow clearing largepages debugfs entry
  KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
  KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
  selftests: kvm: add test for dirty logging inside nested guests
  KVM: x86: fix nested guest live migration with PML
  KVM: x86: assign two bits to track SPTE kinds
  KVM: x86: Expose XSAVEERPTR to the guest
  kvm: x86: Enumerate support for CLZERO instruction
  kvm: x86: Use AMD CPUID semantics for AMD vCPUs
  kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
  KVM: X86: Fix userspace set invalid CR4
  kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
  KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
  KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
  arm64: KVM: Kill hyp_alternate_select()
  ...

Pull xen fixes and cleanups from Juergen Gross:

 - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some
   cases, plus a follow-on cleanup series for that driver

 - a patch for introducing non-blocking EFI callbacks in Xen's EFI
   driver, plu a cleanup patch for Xen EFI handling merging the x86 and
   ARM arch specific initialization into the Xen EFI driver

 - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning
   up after a user process has died

 - a fix for Xen on ARM after removal of ZONE_DMA

 - a cleanup patch for avoiding build warnings for Xen on ARM

* tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: fix self-deadlock after killing user process
  xen/efi: have a common runtime setup function
  arm: xen: mm: use __GPF_DMA32 for arm64
  xen/balloon: Clear PG_offline in balloon_retrieve()
  xen/balloon: Mark pages PG_offline in balloon_append()
  xen/balloon: Drop __balloon_append()
  xen/balloon: Set pages PageOffline() in balloon_add_region()
  ARM: xen: unexport HYPERVISOR_platform_op function
  xen/efi: Set nonblocking callbacks

Merge tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull copy_struct_from_user() helper from Christian Brauner:
 "This contains the copy_struct_from_user() helper which got split out
  from the openat2() patchset. It is a generic interface designed to
  copy a struct from userspace.

  The helper will be especially useful for structs versioned by size of
  which we have quite a few. This allows for backwards compatibility,
  i.e. an extended struct can be passed to an older kernel, or a legacy
  struct can be passed to a newer kernel. For the first case (extended
  struct, older kernel) the new fields in an extended struct can be set
  to zero and the struct safely passed to an older kernel.

  The most obvious benefit is that this helper lets us get rid of
  duplicate code present in at least sched_setattr(), perf_event_open(),
  and clone3(). More importantly it will also help to ensure that users
  implementing versioning-by-size end up with the same core semantics.

  This point is especially crucial since we have at least one case where
  versioning-by-size is used but with slighly different semantics:
  sched_setattr(), perf_event_open(), and clone3() all do do similar
  checks to copy_struct_from_user() while rt_sigprocmask(2) always
  rejects differently-sized struct arguments.

  With this pull request we also switch over sched_setattr(),
  perf_event_open(), and clone3() to use the new helper"

* tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  usercopy: Add parentheses around assignment in test_copy_struct_from_user
  perf_event_open: switch to copy_struct_from_user()
  sched_setattr: switch to copy_struct_from_user()
  clone3: switch to copy_struct_from_user()
  lib: introduce copy_struct_from_user() helper

Pull clone3/pidfd fixes from Christian Brauner:
 "This contains a couple of fixes:

   - Fix pidfd selftest compilation (Shuah Kahn)

     Due to a false linking instruction in the Makefile compilation for
     the pidfd selftests would fail on some systems.

   - Fix compilation for glibc on RISC-V systems (Seth Forshee)

     In some scenarios linux/uapi/linux/sched.h is included where
     __ASSEMBLY__ is defined causing a build failure because struct
     clone_args was not guarded by an #ifndef __ASSEMBLY__.

   - Add missing clone3() and struct clone_args kernel-doc (Christian Brauner)

     clone3() and struct clone_args were missing kernel-docs. (The goal
     is to use kernel-doc for any function or type where it's worth it.)
     For struct clone_args this also contains a comment about the fact
     that it's versioned by size"

* tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  sched: add kernel-doc for struct clone_args
  fork: add kernel-doc for clone3
  selftests: pidfd: Fix undefined reference to pthread_create()
  sched: Add __ASSEMBLY__ guards around struct clone_args

Pull drm fixes from Dave Airlie:
 "Been offline for 3 days, got back and had some fixes queued up.

  Nothing too major, the i915 dp-mst fix is important, and amdgpu has a
  bulk move speedup fix and some regressions, but nothing too insane for
  an rc2 pull. The intel fixes are also 2 weeks worth, they missed the
  boat last week.

  core:
   - writeback fixes

  i915:
   - Fix DP-MST crtc_mask
   - Fix dsc dpp calculations
   - Fix g4x sprite scaling stride check with GTT remapping
   - Fix concurrence on cases where requests where getting retired at
     same time as resubmitted to HW
   - Fix gen9 display resolutions by setting the right max plane width
   - Fix GPU hang on preemption
   - Mark contents as dirty on a write fault. This was breaking cursor
     sprite with dumb buffers.

  komeda:
   - memory leak fix

  tilcdc:
   - include fix

  amdgpu:
   - Enable bulk moves
   - Power metrics fixes for Navi
   - Fix S4 regression
   - Add query for tcc disabled mask
   - Fix several leaks in error paths
   - randconfig fixes
   - clang fixes"

* tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  Revert "drm/i915: Fix DP-MST crtc_mask"
  drm/omap: fix max fclk divider for omap36xx
  drm/i915: Fix g4x sprite scaling stride check with GTT remapping
  drm/i915/dp: Fix dsc bpp calculations, v5.
  drm/amd/display: fix dcn21 Makefile for clang
  drm/amd/display: hide an unused variable
  drm/amdgpu: display_mode_vba_21: remove uint typedef
  drm/amdgpu: hide another #warning
  drm/amdgpu: make pmu support optional, again
  drm/amd/display: memory leak
  drm/amdgpu: fix multiple memory leaks in acp_hw_init
  drm/amdgpu: return tcc_disabled_mask to userspace
  drm/amdgpu: don't increment vram lost if we are in hibernation
  Revert "drm/amdgpu: disable stutter mode for renoir"
  drm/amd/powerplay: add sensor lock support for smu
  drm/amd/powerplay: change metrics update period from 1ms to 100ms
  drm/amdgpu: revert "disable bulk moves for now"
  drm/tilcdc: include linux/pinctrl/consumer.h again
  drm/komeda: prevent memory leak in komeda_wb_connector_add
  drm: Clear the fence pointer when writeback job signaled
  ...

Pull block fixes from Jens Axboe:

 - Mandate timespec64 for the io_uring timeout ABI (Arnd)

 - Set of NVMe changes via Sagi:
     - controller removal race fix from Balbir
     - quirk additions from Gabriel and Jian-Hong
     - nvme-pci power state save fix from Mario
     - Add 64bit user commands (for 64bit registers) from Marta
     - nvme-rdma/nvme-tcp fixes from Max, Mark and Me
     - Minor cleanups and nits from James, Dan and John

 - Two s390 dasd fixes (Jan, Stefan)

 - Have loop change block size in DIO mode (Martijn)

 - paride pg header ifdef guard (Masahiro)

 - Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
   devices and suboptimal performance on others (Ming)

* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
  block: sed-opal: fix sparse warning: convert __be64 data
  block: sed-opal: fix sparse warning: obsolete array init.
  block: pg: add header include guard
  Revert "s390/dasd: Add discard support for ESE volumes"
  s390/dasd: Fix error handling during online processing
  io_uring: use __kernel_timespec in timeout ABI
  loop: change queue block size to match when using DIO
  blk-mq: apply normal plugging for HDD
  blk-mq: honor IO scheduler for multiqueue devices
  nvme-rdma: fix possible use-after-free in connect timeout
  nvme: Move ctrl sqsize to generic space
  nvme: Add ctrl attributes for queue_count and sqsize
  nvme: allow 64-bit results in passthru commands
  nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
  nvmet-tcp: remove superflous check on request sgl
  Added QUIRKs for ADATA XPG SX8200 Pro 512GB
  nvme-rdma: Fix max_hw_sectors calculation
  nvme: fix an error code in nvme_init_subsystem()
  nvme-pci: Save PCI state before putting drive into deepest state
  nvme-tcp: fix wrong stop condition in io_work
  ...

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Always inline asm inlines with variable operands for "i" constraints,
since they won't compile if the compiler would decide to not inline
them.
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Always inline asm inlines with variable operands for "i" constraints,
since they won't compile if the compiler would decide to not inline
them.
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Always inline asm inlines with variable operands for "i" constraints,
since they won't compile if the compiler would decide to not inline
them.
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>