- 25 Feb, 2017 13 commits
-
-
Johannes Weiner authored
Patch series "mm: vmscan: fix kswapd writeback regression". We noticed a regression on multiple hadoop workloads when moving from 3.10 to 4.0 and 4.6, which involves kswapd getting tangled up in page writeout, causing direct reclaim herds that also don't make progress. I tracked it down to the thrash avoidance efforts after 3.10 that make the kernel better at keeping use-once cache and use-many cache sorted on the inactive and active list, with more aggressive protection of the active list as long as there is inactive cache. Unfortunately, our workload's use-once cache is mostly from streaming writes. Waiting for writes to avoid potential reloads in the future is not a good tradeoff. These patches do the following: 1. Wake the flushers when kswapd sees a lump of dirty pages. It's possible to be below the dirty background limit and still have cache velocity push them through the LRU. So start a-flushin'. 2. Let kswapd only write pages that have been rotated twice. This makes sure we really tried to get all the clean pages on the inactive list before resorting to horrible LRU-order writeback. 3. Move rotating dirty pages off the inactive list. Instead of churning or waiting on page writeback, we'll go after clean active cache. This might lead to thrashing, but in this state memory demand outstrips IO speed anyway, and reads are faster than writes. Mel backported the series to 4.10-rc5 with one minor conflict and ran a couple of tests on it. Mix of read/write random workload didn't show anything interesting. Write-only database didn't show much difference in performance but there were slight reductions in IO -- probably in the noise. simoop did show big differences although not as big as Mel expected. This is Chris Mason's workload that similate the VM activity of hadoop. Mel won't go through the full details but over the samples measured during an hour it reported 4.10.0-rc5 4.10.0-rc5 vanilla johannes-v1r1 Amean p50-Read 21346531.56 ( 0.00%) 21697513.24 ( -1.64%) Amean p95-Read 24700518.40 ( 0.00%) 25743268.98 ( -4.22%) Amean p99-Read 27959842.13 ( 0.00%) 28963271.11 ( -3.59%) Amean p50-Write 1138.04 ( 0.00%) 989.82 ( 13.02%) Amean p95-Write 1106643.48 ( 0.00%) 12104.00 ( 98.91%) Amean p99-Write 1569213.22 ( 0.00%) 36343.38 ( 97.68%) Amean p50-Allocation 85159.82 ( 0.00%) 79120.70 ( 7.09%) Amean p95-Allocation 204222.58 ( 0.00%) 129018.43 ( 36.82%) Amean p99-Allocation 278070.04 ( 0.00%) 183354.43 ( 34.06%) Amean final-p50-Read 21266432.00 ( 0.00%) 21921792.00 ( -3.08%) Amean final-p95-Read 24870912.00 ( 0.00%) 26116096.00 ( -5.01%) Amean final-p99-Read 28147712.00 ( 0.00%) 29523968.00 ( -4.89%) Amean final-p50-Write 1130.00 ( 0.00%) 977.00 ( 13.54%) Amean final-p95-Write 1033216.00 ( 0.00%) 2980.00 ( 99.71%) Amean final-p99-Write 1517568.00 ( 0.00%) 32672.00 ( 97.85%) Amean final-p50-Allocation 86656.00 ( 0.00%) 78464.00 ( 9.45%) Amean final-p95-Allocation 211712.00 ( 0.00%) 116608.00 ( 44.92%) Amean final-p99-Allocation 287232.00 ( 0.00%) 168704.00 ( 41.27%) The latencies are actually completely horrific in comparison to 4.4 (and 4.10-rc5 is worse than 4.9 according to historical data for reasons Mel hasn't analysed yet). Still, 95% of write latency (p95-write) is halved by the series and allocation latency is way down. Direct reclaim activity is one fifth of what it was according to vmstats. Kswapd activity is higher but this is not necessarily surprising. Kswapd efficiency is unchanged at 99% (99% of pages scanned were reclaimed) but direct reclaim efficiency went from 77% to 99% In the vanilla kernel, 627MB of data was written back from reclaim context. With the series, no data was written back. With or without the patch, pages are being immediately reclaimed after writeback completes. However, with the patch, only 1/8th of the pages are reclaimed like this. This patch (of 5): We have an elaborate dirty/writeback throttling mechanism inside the reclaim scanner, but for that to work the pages have to go through shrink_page_list() and get counted for what they are. Otherwise, we mess up the LRU order and don't match reclaim speed to writeback. Especially during deactivation, there is never a reason to skip dirty pages; nothing is even trying to write them out from there. Don't mess up the LRU order for nothing, shuffle these pages along. Link: http://lkml.kernel.org/r/20170123181641.23938-2-hannes@cmpxchg.orgSigned-off-by:Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
Now when madvise(MADV_REMOVE) notifies uffd reader, we should verify that appliciation actually sees zeros at the removed range. Link: http://lkml.kernel.org/r/1484814154-1557-4-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by:
-
Mike Rapoport authored
When a page is removed from a shared mapping, the uffd reader should be notified, so that it won't attempt to handle #PF events for the removed pages. We can reuse the UFFD_EVENT_REMOVE because from the uffd monitor point of view, the semantices of madvise(MADV_DONTNEED) and madvise(MADV_REMOVE) is exactly the same. Link: http://lkml.kernel.org/r/1484814154-1557-3-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Mike Rapoport authored
Patch series "userfaultfd: non-cooperative: add madvise() event for MADV_REMOVE request". These patches add notification of madvise(MADV_REMOVE) event to non-cooperative userfaultfd monitor. The first pacth renames EVENT_MADVDONTNEED to EVENT_REMOVE along with relevant functions and structures. Using _REMOVE instead of _MADVDONTNEED describes the event semantics more clearly and I hope it's not too late for such change in the ABI. This patch (of 3): The UFFD_EVENT_MADVDONTNEED purpose is to notify uffd monitor about removal of certain range from address space tracked by userfaultfd. Hence, UFFD_EVENT_REMOVE seems to better reflect the operation semantics. Respectively, 'madv_dn' field of uffd_msg is renamed to 'remove' and the madvise_userfault_dontneed callback is renamed to userfaultfd_remove. Link: http://lkml.kernel.org/r/1484814154-1557-2-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by:
-
Heiko Carstens authored
Provide the name of each memblock type with struct memblock_type. This allows to get rid of the function memblock_type_name() and duplicating the type names in __memblock_dump_all(). The only memblock_type usage out of mm/memblock.c seems to be arch/s390/kernel/crash_dump.c. While at it, give it a name. Link: http://lkml.kernel.org/r/20170120123456.46508-4-heiko.carstens@de.ibm.comSigned-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Since commit 70210ed9 ("mm/memblock: add physical memory list") the memblock structure knows about a physical memory list. The physical memory list should also be dumped if memblock_dump_all() is called in case memblock_debug is switched on. This makes debugging a bit easier. Link: http://lkml.kernel.org/r/20170120123456.46508-3-heiko.carstens@de.ibm.comSigned-off-by:
-
Heiko Carstens authored
Since commit 70210ed9 ("mm/memblock: add physical memory list") the memblock structure knows about a physical memory list. memblock_type_name() should return "physmem" instead of "unknown" if the name of the physmem memblock_type is being asked for. Link: http://lkml.kernel.org/r/20170120123456.46508-2-heiko.carstens@de.ibm.comSigned-off-by:
-
Andrew Morton authored
It has no modular callers. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
mem_hotplug_begin() assumes that it can set mem_hotplug.active_writer and run the hotplug process without racing another thread. Validate this assumption with a lockdep assertion. Link: http://lkml.kernel.org/r/148693886229.16345.1770484669403334689.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
-
Dan Williams authored
The mem_hotplug_{begin,done} lock coordinates with {get,put}_online_mems() to hold off "readers" of the current state of memory from new hotplug actions. mem_hotplug_begin() expects exclusive access, via the device_hotplug lock, to set mem_hotplug.active_writer. Calling mem_hotplug_begin() without locking device_hotplug can lead to corrupting mem_hotplug.refcount and missed wakeups / soft lockups. [dan.j.williams@intel.com: v2] Link: http://lkml.kernel.org/r/148728203365.38457.17804568297887708345.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/148693885680.16345.17802627926777862337.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: f931ab47 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Signed-off-by: -
David Rientjes authored
Commit 82e7d3ab ("oom: print nodemask in the oom report") implicitly sets the allocation nodemask to cpuset_current_mems_allowed when there is no effective mempolicy. cpuset_current_mems_allowed is only effective when cpusets are enabled, which is also printed by dump_header(), so setting the nodemask to cpuset_current_mems_allowed is redundant and prevents debugging issues where ac->nodemask is not set properly in the page allocator. This provides better debugging output since cpuset_print_current_mems_allowed() is already provided. [rientjes@google.com: newline per Hillf] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701200158300.88321@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701191454470.2381@chino.kir.corp.google.comSigned-off-by:
David Rientjes <rientjes@google.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
-
Claudio Imbrenda authored
Some architectures have a set of zero pages (coloured zero pages) instead of only one zero page, in order to improve the cache performance. In those cases, the kernel samepage merger (KSM) would merge all the allocated pages that happen to be filled with zeroes to the same deduplicated page, thus losing all the advantages of coloured zero pages. This behaviour is noticeable when a process accesses large arrays of allocated pages containing zeroes. A test I conducted on s390 shows that there is a speed penalty when KSM merges such pages, compared to not merging them or using actual zero pages from the start without breaking the COW. This patch fixes this behaviour. When coloured zero pages are present, the checksum of a zero page is calculated during initialisation, and compared with the checksum of the current canditate during merging. In case of a match, the normal merging routine is used to merge the page with the correct coloured zero page, which ensures the candidate page is checked to be equal to the target zero page. A sysfs entry is also added to toggle this behaviour, since it can potentially introduce performance regressions, especially on architectures without coloured zero pages. The default value is disabled, for backwards compatibility. With this patch, the performance with KSM is the same as with non COW-broken actual zero pages, which is also the same as without KSM. [akpm@linux-foundation.org: make zero_checksum and ksm_use_zero_pages __read_mostly, per Andrea] [imbrenda@linux.vnet.ibm.com: documentation for coloured zero pages deduplication] Link: http://lkml.kernel.org/r/1484927522-1964-1-git-send-email-imbrenda@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1484850953-23941-1-git-send-email-imbrenda@linux.vnet.ibm.comSigned-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Davidlohr Bueso authored
Given that the arch does not add its own implementations, simply use the asm-generic/current.h (generic-y) header instead of duplicating code. Link: http://lkml.kernel.org/r/1485992878-4780-3-git-send-email-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
- 24 Feb, 2017 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace updates from Eric Biederman: "There is a lot here. A lot of these changes result in subtle user visible differences in kernel behavior. I don't expect anything will care but I will revert/fix things immediately if any regressions show up. From Seth Forshee there is a continuation of the work to make the vfs ready for unpriviled mounts. We had thought the previous changes prevented the creation of files outside of s_user_ns of a filesystem, but it turns we missed the O_CREAT path. Ooops. Pavel Tikhomirov and Oleg Nesterov worked together to fix a long standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only children that are forked after the prctl are considered and not children forked before the prctl. The only known user of this prctl systemd forks all children after the prctl. So no userspace regressions will occur. Holding earlier forked children to the same rules as later forked children creates a semantic that is sane enough to allow checkpoing of processes that use this feature. There is a long delayed change by Nikolay Borisov to limit inotify instances inside a user namespace. Michael Kerrisk extends the API for files used to maniuplate namespaces with two new trivial ioctls to allow discovery of the hierachy and properties of namespaces. Konstantin Khlebnikov with the help of Al Viro adds code that when a network namespace exits purges it's sysctl entries from the dcache. As in some circumstances this could use a lot of memory. Vivek Goyal fixed a bug with stacked filesystems where the permissions on the wrong inode were being checked. I continue previous work on ptracing across exec. Allowing a file to be setuid across exec while being ptraced if the tracer has enough credentials in the user namespace, and if the process has CAP_SETUID in it's own namespace. Proc files for setuid or otherwise undumpable executables are now owned by the root in the user namespace of their mm. Allowing debugging of setuid applications in containers to work better. A bug I introduced with permission checking and automount is now fixed. The big change is to mark the mounts that the kernel initiates as a result of an automount. This allows the permission checks in sget to be safely suppressed for this kind of mount. As the permission check happened when the original filesystem was mounted. Finally a special case in the mount namespace is removed preventing unbounded chains in the mount hash table, and making the semantics simpler which benefits CRIU. The vfs fix along with related work in ima and evm I believe makes us ready to finish developing and merge fully unprivileged mounts of the fuse filesystem. The cleanups of the mount namespace makes discussing how to fix the worst case complexity of umount. The stacked filesystem fixes pave the way for adding multiple mappings for the filesystem uids so that efficient and safer containers can be implemented" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc/sysctl: Don't grab i_lock under sysctl_lock. vfs: Use upper filesystem inode in bprm_fill_uid() proc/sysctl: prune stale dentries during unregistering mnt: Tuck mounts under others instead of creating shadow/side mounts. prctl: propagate has_child_subreaper flag to every descendant introduce the walk_process_tree() helper nsfs: Add an ioctl() to return owner UID of a userns fs: Better permission checking for submounts exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction vfs: open() with O_CREAT should not create inodes with unknown ids nsfs: Add an ioctl() to return the namespace type proc: Better ownership of files for non-dumpable tasks in user namespaces exec: Remove LSM_UNSAFE_PTRACE_CAP exec: Test the ptracer's saved cred to see if the tracee can gain caps exec: Don't reset euid and egid when the tracee has CAP_SETUID inotify: Convert to using per-namespace limits
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
-
Dave Airlie authored
Linus doesn't like it user selectable, so kill it until someone needs it for something else. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Noralf Trønnes authored
BACKLIGHT_CLASS_DEVICE was selected in the last version of the tinydrm patchset to fix the backlight dependency, but the ifdef CONFIG_BACKLIGHT_CLASS_DEVICE was forgotten. Fix that. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Noralf Trønnes authored
This warning is seen on 64-bit builds in functions: 'mipi_dbi_typec1_command': 'mipi_dbi_typec3_command_read': 'mipi_dbi_typec3_command': >> drivers/gpu/drm/tinydrm/mipi-dbi.c:65:20: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \ ^ include/drm/drmP.h:228:40: note: in definition of macro 'DRM_DEBUG_DRIVER' drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) ^~~ >> drivers/gpu/drm/tinydrm/mipi-dbi.c:671:2: note: in expansion of macro 'MIPI_DBI_DEBUG_COMMAND' MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num); ^~~~~~~~~~~~~~~~~~~~~~ Fix by casting 'len' to int in the macro MIPI_DBI_DEBUG_COMMAND(). There is no chance of overflow. Signed-off-by: -
Noralf Trønnes authored
Fix this warning: drivers/gpu/drm/tinydrm/mipi-dbi.c: In function ‘mipi_dbi_debugfs_command_write’: drivers/gpu/drm/tinydrm/mipi-dbi.c:905:8: warning: ‘cmd’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = mipi_dbi_command_buf(mipi, cmd, parameters, i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cmd can't be used uninitialized, but to satisfy the compiler, initialize it to zero. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy test fix from Kees Cook: "Fix for non-MMU ARM testing, from Arnd Bergmann" * tag 'usercopy-v4.11-rc1.fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: ARM NOMMU has no 64-bit get_user
-
- 23 Feb, 2017 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM 64-bit DT updates from Arnd Bergmann: "ARM64 DT updates are fairly small this time, only two new SoCs and a handful of new machines get added, all of them similar to other hardware we already support. New SoC: - HiSilicon Kirin960/Hi3660 and HiKey960 development board - NXP LS1012a with three reference boards: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A New development board: - Banana Pi M64, based on Allwinner A64: http://www.banana-pi.org/m64.html - SolidRun MACCHIATOBin based on Marvell Armada 8K: https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/ - Broadcom BCM958712DxXMC NorthStar2 reference board (another one) A lot of platforms improve support for existing machines by adding extra devices for which a binding and driver is availabe: Allwinner: - MMC, USB ARM Juno: - Coresight, STM Broadcom: - NS2 GICv2m irqchip and PCIe Marvell: - Armada 3700 SPI, I2C, ethernet switch Mediatek: - MT8173 thermal NXP i.MX: - LS1046A thermal Qualcomm: - coresight on MSM8916, HDMI, WCNSS, SCM Renesas: - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd Rockchip: - thermal, eDP, pinctrl enhancements Samsung: - TM2 touchkey, Exynos5433 HDMI and power management improvements UniPhier: - SD reset, eMMC controller ZTE: - oppv2 cpufreq" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits) arm64: dts: qcom: Add msm8916 CoreSight components arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes dt-bindings: clockgen: Add compatible string for LS1012A Documentation: DT: add LS1012A compatible for SCFG and DCFG Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci arm64: tegra: Use symbolic reset identifiers arm64: dts: r8a7796: Mark EthernetAVB device node disabled arm64: dts: r8a7795: Mark EthernetAVB device node disabled arm64: dts: r8a7795: tidyup audma definition order arm64: dts: r8a7796: Link ARM GIC to clock and clock domain arm64: dts: r8a7795: Link ARM GIC to clock and clock domain arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: dts: r8a7795: Add R-Car Gen3 thermal support ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC defconfig updates from Arnd Bergmann: "Defconfig additions, removals, etc. Almost all of them just turn on drivers that we want on some platform, usually after the driver has been merged into mainline. There is now a new defconfig file for tango4" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: multi_v7_defconfig: enable pstore configs ARM: multi_v7_defconfig: enable some newly added crypto modules ARM: davinci_all_defconfig: enable SATA modules arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT arm64: defconfig: enable CONFIG_MTD_BLOCK ARM: Import tango4_defconfig ARM: omap2plus_defconfig: Enable support for RTC M41T80 ARM: omap2plus_defconfig: Enable support for micrell phys ARM: vf610m4: defconfig: enable EXT4 filesystem ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 arm64: defconfig: Enable NUMA and NUMA_BALANCING arm64: defconfig: enable SMMUv3 config ARM: davinci_all_defconfig: enable iio ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER ARM: configs: stm32: Add RTC support in STM32 defconfig ARM: defconfig: qcom: add APQ8060 DragonBoard devices ARM: qcom_defconfig: enable thermal sensors ARM: qcom_defconfig: add ahci configs ARM: qcom_defconfig: add pcie and atl1c ethernet configs ARM: qcom_defconfig: add usb related configs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms, only trivial stuff this time, a few defconfig changes to enable drivers, and a new entry for the Cavium ThunderX2 platform" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add Cavium ThunderX2 entry arm64: add ARCH_THUNDER2 to defconfig arm64: add THUNDER2 processor family MAINTAINERS: Extend ARM/Mediatek SoC support section arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC non-urgent fixes from Arnd Bergmann: "We sometimes collect non-critical fixes that come in during the later part of the merge window in a branch for the next release instead, and this is that contents for v4.11. Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI to only enable on ARM{,64}" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: firmware: arm_scpi: Add hardware dependencies ARM: OMAP3: Fix SoC detection of OMAP36/37 Family ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART ARM: dts: Fix compatible for ti81xx uarts for 8250 ARM: dts: Fix am335x and dm814x scm syscon to probe children ARM: OMAP2+: Fix init for multiple quirks for the same SoC ARM: dts: Fix omap3 off mode pull defines bus: da850-mstpri: fix my e-mail address ARM: davinci: da850: fix da850_set_pll0rate() ARM: davinci: da850: coding style fix -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Some ttm/amd fixes. * 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: fix PSI feature on Polars12. drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/amd/amdgpu: post card if there is real hw resetting performed
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v4.11-rc1 This set contains a couple of cleanups as well as support for a few more simple panels. * tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Specify bus width and flags for EDT displays drm/panel: simple: Add Netron DY E231732 of: Add vendor prefix for Netron DY drm/panel: simple: Add support for Tianma TM070JDHG30 of: Add vendor prefix for Tianma Micro-electronics drm/panel: simple: Add support BOE NV101WXMN51 dt-bindings: display: Add BOE NV101WXMN51 panel binding drm/panel: Constify device node argument to of_drm_find_panel()
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.11-rc1 Just a single change that hooks up the Tegra DRM parent device to the correct device tree node. * tag 'drm/tegra/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux: gpu: host1x: Set OF node for new host1x devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Some 'const'ing in qlogic networking drivers, from Bhumika Goyal. 2) Fix scheduling while atomic in l2tp network namespace exit by deferring the work to the workqueue. From Ridge Kennedy. 3) Fix use after free in dccp timewait handling, from Andrey Ryabinin. 4) mlx5e CQE compression engine not initialized properly, from Tariq Toukan. 5) Some UAPI header fixes from Dmitry V. Levin. 6) Don't overwrite module parameter value in mlx4 driver, from Majd Dibbiny. 7) Fix divide by zero in xt_hashlimit netfilter module, from Alban Browaeys. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) bpf: Fix bpf_xdp_event_output net/mlx4_en: Use __skb_fill_page_desc() net/mlx4_core: Use cq quota in SRIOV when creating completion EQs net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs net/mlx4: Spoofcheck and zero MAC can't coexist net/mlx4: Change ENOTSUPP to EOPNOTSUPP uapi: fix linux/rds.h userspace compilation errors uapi: fix linux/seg6.h and linux/seg6_iptunnel.h userspace compilation errors lib: Remove string from parman config selection forcedeth: Remove return from a void function bpf: fix spelling mistake: "proccessed" -> "processed" uapi: fix linux/llc.h userspace compilation error uapi: fix linux/ip6_tunnel.h userspace compilation errors net/mlx5e: Fix wrong CQE decompression net/mlx5e: Update MPWQE stride size when modifying CQE compress state net/mlx5e: Fix broken CQE compression initialization net/mlx5e: Do not reduce LRO WQE size when not using build_skb net/mlx5e: Register/unregister vport representors on interface attach/detach net/mlx5e: s390 system compilation fix tcp: account for ts offset only if tsecr not zero ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull Mellanox rdma updates from Doug Ledford: "Mellanox specific updates for 4.11 merge window Because the Mellanox code required being based on a net-next tree, I keept it separate from the remainder of the RDMA stack submission that is based on 4.10-rc3. This branch contains: - Various mlx4 and mlx5 fixes and minor changes - Support for adding a tag match rule to flow specs - Support for cvlan offload operation for raw ethernet QPs - A change to the core IB code to recognize raw eth capabilities and enumerate them (touches non-Mellanox code) - Implicit On-Demand Paging memory registration support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits) IB/mlx5: Fix configuration of port capabilities IB/mlx4: Take source GID by index from HW GID table IB/mlx5: Fix blue flame buffer size calculation IB/mlx4: Remove unused variable from function declaration IB: Query ports via the core instead of direct into the driver IB: Add protocol for USNIC IB/mlx4: Support raw packet protocol IB/mlx5: Support raw packet protocol IB/core: Add raw packet protocol IB/mlx5: Add implicit MR support IB/mlx5: Expose MR cache for mlx5_ib IB/mlx5: Add null_mkey access IB/umem: Indicate that process is being terminated IB/umem: Update on demand page (ODP) support IB/core: Add implicit MR flag IB/mlx5: Support creation of a WQ with scatter FCS offload IB/mlx5: Enable QP creation with cvlan offload IB/mlx5: Enable WQ creation and modification with cvlan offload IB/mlx5: Expose vlan offloads capabilities IB/uverbs: Enable QP creation with cvlan offload ... -
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Kconfig fixes for SPAPR_TCE_IOMMU=n (Michael Ellerman) - Module softdep rather than request_module to simplify usage from initrd (Alex Williamson) - Comment typo fix (Changbin Du) * tag 'vfio-v4.11-rc1' of git://github.com/awilliam/linux-vfio: vfio: fix a typo in comment of function vfio_pin_pages vfio: Replace module request with softdep vfio/mdev: Use a module softdep for vfio_mdev vfio: Fix build break when SPAPR_TCE_IOMMU=n
-
Martin KaFai Lau authored
Fix a typo. xdp->data instead of xdp should be copied to the perf-event's dst_buff. Fixes: 4de16969 ("bpf: enable event output helper also for xdp types") Reported-by:
Huapeng Zhou <hzhou@fb.com> Tested-by:
Feixiong Zhang <feixiong@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu: "API: - Try to catch hash output overrun in testmgr - Introduce walksize attribute for batched walking - Make crypto_xor() and crypto_inc() alignment agnostic Algorithms: - Add time-invariant AES algorithm - Add standalone CBCMAC algorithm Drivers: - Add NEON acclerated chacha20 on ARM/ARM64 - Expose AES-CTR as synchronous skcipher on ARM64 - Add scalar AES implementation on ARM64 - Improve scalar AES implementation on ARM - Improve NEON AES implementation on ARM/ARM64 - Merge CRC32 and PMULL instruction based drivers on ARM64 - Add NEON acclerated CBCMAC/CMAC/XCBC AES on ARM64 - Add IPsec AUTHENC implementation in atmel - Add Support for Octeon-tx CPT Engine - Add Broadcom SPU driver - Add MediaTek driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits) crypto: xts - Add ECB dependency crypto: cavium - switch to pci_alloc_irq_vectors crypto: cavium - switch to pci_alloc_irq_vectors crypto: cavium - remove dead MSI-X related define crypto: brcm - Avoid double free in ahash_finup() crypto: cavium - fix Kconfig dependencies crypto: cavium - cpt_bind_vq_to_grp could return an error code crypto: doc - fix typo hwrng: omap - update Kconfig help description crypto: ccm - drop unnecessary minimum 32-bit alignment crypto: ccm - honour alignmask of subordinate MAC cipher crypto: caam - fix state buffer DMA (un)mapping crypto: caam - abstract ahash request double buffering crypto: caam - fix error path for ctx_dma mapping failure crypto: caam - fix DMA API leaks for multiple setkey() calls crypto: caam - don't dma_map key for hash algorithms crypto: caam - use dma_map_sg() return code crypto: caam - replace sg_count() with sg_nents_for_len() crypto: caam - check sg_count() return value crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc() ..
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This introduces an interface for user space to directly communicate on rpmsg endpoints without the implementation of specific kernel drivers, which is useful for e.g. debug channels: * tag 'rpmsg-v4.11' of git://github.com/andersson/remoteproc: rpmsg: rpmsg_create_ept() returns NULL on error rpmsg: qcom: smd: Return positively when not enabled rpmsg: unlock on error in rpmsg_eptdev_read() rpmsg: char: add CONFIG_NET dependency rpmsg: smd: Register rpmsg user space interface for edges rpmsg: Driver for user space endpoint interface rpmsg: qcom_smd: Implement endpoint "poll" rpmsg: Introduce "poll" to endpoint ops rpmsg: qcom_smd: Add support for "label" property
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This introduces support for booting the dedicated sensor core in the Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to utilize SMD subdevice helpers for properly handle shutdowns and restarts of the remoteproc, add virtio support to the ST remoteproc and refactor the Qualcomm Hexagon driver to handle variations between platforms. The support code for parsing, loading and authenticating Qualcomm firmware files (MDT) is refactored and move to drivers/soc/qcom, to allow for non-remoteproc drivers to utilize this. Finally it brings some cleanups to the remoteproc core" * tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits) remoteproc: qcom: mdt_loader: Use signed type for offset remoteproc: st: add virtio communication support remoteproc: st: correct probe error management remoteproc: Modify the function names remoteproc: Reduce asynchronous request_firmware to auto-boot only remoteproc: Drop qcom_scm_pas_supported() from adsp_probe() MAINTAINERS: Add missing rpmsg include path remoteproc: qcom: Use common SMD edge handler remoteproc: qcom: wcnss: Make SMD handling common remoteproc: Move qcom_mdt_loader into drivers/soc/qcom remoteproc: qcom: mdt_loader: Refactor MDT loader remoteproc: qcom: mdt_loader: Don't overwrite firmware object remoteproc: qcom: Extract non-mdt related helper remoteproc: qcom: q6v5: Decouple driver from MDT loader remoteproc: qcom: q6v5: Remove mss supply from 8916 remoteproc: qcom: fix initializers for qcom_mss_reg_res array remoteproc: Drop firmware_loading_complete remoteproc: Add RPROC_DELETED state remoteproc: Move rproc_delete_debug_dir() to rproc_del() remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull GFS2 fix from Bob Peterson: "This is an addendum for the 4.11 merge window. Andy Price wrote this patch to close a nasty race condition that allows access to glocks that are being destroyed. Without this patch, GFS2 is vulnerable to random corruption and kernel panic" * tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Add missing rcu locking for glock lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Here is the update of sound bits for 4.11: again at this time, no big changes in ALSA and ASoC core but only cosmetic changes like consitifaction. Meanwhile, quite a lot of developments are seen in a few driver side. ALSA Core: - Clean up, consitification of some ops HD-audio: - A slight behavior change of single_cmd option - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221 HP, and fixes for Lewisburg controller - Realtek ALC299, ALC1220 codecs Others: - USB-audio: Tascam US-16x08 DSP mixer quirk - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this contains some updates in drm/i915 for the new platform binding ASoC: - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI on Skylake and onwards, as well as more Baytrail / Cherrytrail boards support - Channel mapping support for HDMI - Support for AllWinner A31 and A33, Everest Semiconductor ES8328, Nuvoton NAU8540. * tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits) ALSA: usb-audio: Tidy up mixer_us16x08.c ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c ALSA: usb-audio: purge needless variable length array ALSA: x86: hdmi: select CONFIG_SND_PCM ALSA: x86: Don't enable runtime PM as default ALSA: x86: Use runtime PM autosuspend ALSA: usb-audio: localize function without external linkage ALSA: usb-audio: localize one-referrer variable ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk ALSA: emu10k1: constify snd_emux_operators structure ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component() ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine ASoC: nau8825: automatic BCLK and LRC divde in master mode ASoC: hdac_hdmi: Add device id for Geminilake ASoC: Intel: Skylake: Add Geminlake IDs ASoC: rt298: Add DMI match for Geminilake reference platform ASoC: Intel: Skylake: Check device type to get endpoint configuration ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine ...
-
