- 16 Sep, 2014 40 commits
-
-
James Smart authored
Fix race between LOGO/PLOGI handling causing NULL pointer Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
James Smart authored
Fix IP Reset processing - wait for RDY before proceeding Signed-off-by:
-
James Smart authored
Fix quarantined XRI recovery qualifier state in link bounce Signed-off-by:
-
James Smart authored
Fix discovery timeout during nameserver login Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
Alexander Gordeev <agordeev@redhat.com> Reviewed-by:
-
Daniel Borkmann authored
In prandom we have already reseeding mechanisms that trigger periodically from a much better entropy source than just feeding in jiffies through lpfc_mbx_cmpl_fcf_scan_read_fcf_rec() [what a function name 8-)]. Therefore, just remove this. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Reviewed-by:
-
Manuel Schölling authored
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of plain, error-prone math. Signed-off-by:
Manuel Schölling <manuel.schoelling@gmx.de> Reviewed-by:
-
Joe Perches authored
Use the zeroing function instead of dma_alloc_coherent & memset(,0,) Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
-
Rashika Kheria authored
[PATCH 26/55] scsi: Mark function as static in lpfc/lpfc_bsg.c Mark function as static in lpfc/lpfc_bsg.c because it is not used outside this file. This eliminates the following warning in lpfc/lpfc_bsg.c: drivers/scsi/lpfc/lpfc_bsg.c:3348:1: warning: no previous prototype for ‘lpfc_bsg_issue_mbox_cmpl’ [-Wmissing-prototypes] Signed-off-by:
Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Reviewed-by:
-
Rashika Kheria authored
Mark functions as static in lpfc/lpfc_scsi.c because they are not used outside this file. This eliminates the following warnings in lpfc/lpfc_scsi.c: drivers/scsi/lpfc/lpfc_scsi.c:299:1: warning: no previous prototype for ‘lpfc_change_queue_depth’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_scsi.c:795:1: warning: no previous prototype for ‘lpfc_sli4_post_scsi_sgl_list’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_scsi.c:3019:1: warning: no previous prototype for ‘lpfc_bg_crc’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_scsi.c:3035:1: warning: no previous prototype for ‘lpfc_bg_csum’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_scsi.c:3048:1: warning: no previous prototype for ‘lpfc_calc_bg_err’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
Mark functions as static in lpfc/lpfc_init.c because they are not used outside this file. This eliminates the following warning in lpfc/lpfc_init.c: drivers/scsi/lpfc/lpfc_init.c:652:1: warning: no previous prototype for ‘lpfc_hba_init_link’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_init.c:753:1: warning: no previous prototype for ‘lpfc_hba_down_link’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_init.c:3434:1: warning: no previous prototype for ‘lpfc_sli4_fcf_redisc_wait_tmo’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
Mark functions as static in lpfc/lpfc_hbadisc.c because they are not used outside this file. This eliminates the following warnings in lpfc/lpfc_hbadisc.c: drivers/scsi/lpfc/lpfc_hbadisc.c:2047:5: warning: no previous prototype for ‘lpfc_sli4_fcf_pri_list_add’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_hbadisc.c:2681:1: warning: no previous prototype for ‘lpfc_init_vfi_cmpl’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_hbadisc.c:4432:1: warning: no previous prototype for ‘lpfc_nlp_logo_unreg’ [-Wmissing-prototypes] Signed-off-by:
-
Rashika Kheria authored
[PATCH 22/55] scsi: Mark functions as static in lpfc/lpfc_sli.c Mark functions as static in lpfc/lpfc_sli.c because they are not used outside this file. This eliminates the following warnings in lpfc/lpfc_sli.c: drivers/scsi/lpfc/lpfc_sli.c:13867:1: warning: no previous prototype for ‘lpfc_sli4_alloc_xri’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:13897:1: warning: no previous prototype for ‘__lpfc_sli4_free_xri’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:14317:1: warning: no previous prototype for ‘lpfc_update_rcv_time_stamp’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:14786:1: warning: no previous prototype for ‘lpfc_sli4_handle_unsol_abort’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:15331:1: warning: no previous prototype for ‘__lpfc_sli4_free_rpi’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:15769:1: warning: no previous prototype for ‘lpfc_check_next_fcf_pri_level’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:16000:1: warning: no previous prototype for ‘lpfc_mbx_cmpl_redisc_fcf_table’ [-Wmissing-prototypes] Signed-off-by:
-
Hiral Shah authored
1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent to correct Mac address for VLAN Discovery otherwise VLAN request will be sent to invalid address hence FLOGI never happens. 2) Simplify the copy_and_format_trace_data code and log the correct Link event for fnic control path tracing in case of link status UP->UP. 3) Increment Fnic driver version Signed-off-by:
Hiral Shah <hishah@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by:
-
Joe Lawrence authored
The PCI register read checking introduced in commit fe1b806f ("qla2xxx: Disable adapter when we encounter a PCI disconnect") is active during driver probe. Hold off scheduling any board removal until the driver probe has completed. This ensures that the the board_disable work structure is initialized and more importantly, avoids racing qla2x00_probe_one. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Joe Lawrence authored
Introduce mutual exclusion between the qla2xxx_remove_one PCI driver callback and qla2x00_disable_board_on_pci_error, which is scheduled as board_disable work by qla2x00_check_reg{32,16}_for_disconnect: * Leave the driver-specific data attached to the underlying PCI device intact in qla2x00_disable_board_on_pci_error, so that qla2x00_remove_one has enough breadcrumbs to determine that any board_disable work has been completed. * In qla2xxx_remove_one, set a bit to prevent any subsequent board_disable work from scheduling, then cancel and wait until pending work has completed. * Reuse the PCI device enable count check in qla2x00_remove_one to determine if board_disable has occured. The original purpose of this check was unnecessary since the driver remove function wasn't called when the probe fails. Signed-off-by: -
Joe Lawrence authored
There are various callers of qla2x00_check_reg{32,16}_for_disconnect that may schedule board removal on PCI-disconnect. Test-and-set a dedicated flag before scheduling board_disable so it is invoked only once. Signed-off-by: -
Joe Lawrence authored
Add an uint16_t variant of qla2x00_check_reg_for_disconnect and use these routines to check and schedule a PCI-disconnected board from a centralized place. Signed-off-by:
-
Joe Lawrence authored
Take advantage of commit fe1b806f ("qla2xxx: Refactor shutdown code so some functionality can be reused") to remove an inlined copy of qla2x00_clear_drv_active in the driver's probe hardware error path. Signed-off-by:
-
Joe Lawrence authored
Once calling scsi_host_put, be careful to not access qla_hw_data through the Scsi_Host private data (ie, scsi_qla_host base_vha). Fixes: fe1b806f ("qla2xxx: Refactor shutdown code so some functionality can be reused") Cc: stable@vger.kernel.org # 3.14, 3.15, 3.16 Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Alexander Gordeev authored
Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
There is no need to call pci_disable_msix() in case the previous call to pci_enable_msix() failed Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas updates the driver version and Documentation/scsi/ChangeLog.megaraid_sas. Signed-off-by:
Adam Radford <aradford@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas fixes a reset_mutex leak in megasas_reset_fusion(). Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas removes some unused variables from the megasas_instance structure. Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas adds a missing initial call to megasas_get_ld_vf_affiliation() at the end of megasas_probe_one(). Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas fixes the LD/VF affiliation policy parsing code to account for LD targetId's and Hidden LD's (not yet affiliated with any Virtual Functions). This also breaks megasas_get_ld_vf_affiliation() into 2 separate functions: megasas_get_ld_vf_affiliation_111() and megasas_get_ld_Vf_affiliation_12() to reduce indentation levels. Signed-off-by:
-
Douglas Gilbert authored
Since a lot of functionality from SPC-4 is supported by this driver (e.g. LBP and PI) then bump the default INQUIRY version from SPC-3 to SPC-4. Also update the INQUIRY version descriptors. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Douglas Gilbert authored
Give existing errors priority over the generation of Task Set Full (TSF) errors. So that max_queue is not exceeded, existing errors may be sent back in the invocation thread. This is done so errors like Unit Attentions are not hidden and lost by either max_queue exceeded or real/injected TSFs. Signed-off-by:
-
Douglas Gilbert authored
This patch removes a NULL check for the scsi_cmnd::cmnd pointer since many other instances in this driver and elsewhere assume it is valid. Also redundant casts to 'unsigned char *' are removed as the pointer has that type. Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc excess parameter warning: Warning(..//drivers/message/fusion/mptbase.c:1411): Excess function parameter 'prod_name' description in 'mpt_get_product_name' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Tomas Henzl authored
When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Suresh Thiagarajan authored
Instead of using the virt_ptr use request buffer for copying back the nvmd response data and use the same in request function also Signed-off-by:
Suresh Thiagarajan <suresh.thiagarajan@pmcs.com> Reviewed-by:
-
Jayamohan Kallickal authored
Bump the driver version Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
Driver should process the completion queue entries before a connection resources are freed. While running mixed traffic due to latency, driver processes the CQE after the connection resources are freed. This fix processes all the completion queue before the connection resources are freed. Signed-off-by:
-
Jayamohan Kallickal authored
During port async event driver should check if there is any boot target configured on the adapter. Update sysfs enteries with the boot target parameters. Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
-
Jayamohan Kallickal authored
Change the copyright year to 2014 Signed-off-by:
-
