Skip to content

L
linux
Switch branch/tag
  1. 11 Jun, 2018 7 commits
    • Suresh Reddy's avatar
      be2net: Fix error detection logic for BE3 · 128f0d70
      Suresh Reddy authored 
      [ Upstream commit d2c2725c ]

Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0)
in be_detect_error() to know whether the error is valid error or not

Fixes: 673c96e5 ("be2net: Fix UE detection logic for BE3")
Signed-off-by: default avatarSuresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      128f0d70
    • Nathan Chancellor's avatar
      kconfig: Avoid format overflow warning from GCC 8.1 · d58cf419
      Nathan Chancellor authored 
      commit 2ae89c7a upstream.

In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
  sprintf(newname, "%s%s", dirname, basename);
                      ^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
  sprintf(newname, "%s%s", dirname, basename);
                   ^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
  sprintf(newname, "%s%s", dirname, basename);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
                       ^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Increase the size of tmpname and newname to make GCC happy.
Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d58cf419
    • Anand Jain's avatar
      btrfs: define SUPER_FLAG_METADUMP_V2 · 058dd233
      Anand Jain authored 
      commit e2731e55 upstream.

btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34).
So just define that in kernel so that we know its been used.
Signed-off-by: default avatarAnand Jain <anand.jain@oracle.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      058dd233
    • Linus Torvalds's avatar
      mmap: relax file size limit for regular files · af760b56
      Linus Torvalds authored 
      commit 423913ad upstream.

Commit be83bbf8 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong.  In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.

It turns out that the "s_maxbytes" limit was less "known good" than I
thought.  In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore.  As a result, that file got limited to the
default MAX_INT s_maxbytes value.

This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.

Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage.  So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else.  It wasn't the regular file case I was worried
about.

I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.

Fixes: be83bbf8 ("mmap: introduce sane default mmap limits")
Reported-by: default avatarVasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      af760b56
    • Linus Torvalds's avatar
      mmap: introduce sane default mmap limits · 16d7ceb0
      Linus Torvalds authored 
      commit be83bbf8 upstream.

The internal VM "mmap()" interfaces are based on the mmap target doing
everything using page indexes rather than byte offsets, because
traditionally (ie 32-bit) we had the situation that the byte offset
didn't fit in a register.  So while the mmap virtual address was limited
by the word size of the architecture, the backing store was not.

So we're basically passing "pgoff" around as a page index, in order to
be able to describe backing store locations that are much bigger than
the word size (think files larger than 4GB etc).

But while this all makes a ton of sense conceptually, we've been dogged
by various drivers that don't really understand this, and internally
work with byte offsets, and then try to work with the page index by
turning it into a byte offset with "pgoff << PAGE_SHIFT".

Which obviously can overflow.

Adding the size of the mapping to it to get the byte offset of the end
of the backing store just exacerbates the problem, and if you then use
this overflow-prone value to check various limits of your device driver
mmap capability, you're just setting yourself up for problems.

The correct thing for drivers to do is to do their limit math in page
indices, the way the interface is designed.  Because the generic mmap
code _does_ test that the index doesn't overflow, since that's what the
mmap code really cares about.

HOWEVER.

Finding and fixing various random drivers is a sisyphean task, so let's
just see if we can just make the core mmap() code do the limiting for
us.  Realistically, the only "big" backing stores we need to care about
are regular files and block devices, both of which are known to do this
properly, and which have nice well-defined limits for how much data they
can access.

So let's special-case just those two known cases, and then limit other
random mmap users to a backing store that still fits in "unsigned long".
Realistically, that's not much of a limit at all on 64-bit, and on
32-bit architectures the only worry might be the GPU drivers, which can
have big physical address spaces.

To make it possible for drivers like that to say that they are 64-bit
clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the
file flags to allow drivers to mark their file descriptors as safe in
the full 64-bit mmap address space.

[ The timing for doing this is less than optimal, and this should really
  go in a merge window. But realistically, this needs wide testing more
  than it needs anything else, and being main-line is the only way to do
  that.

  So the earlier the better, even if it's outside the proper development
  cycle        - Linus ]

Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      16d7ceb0
    • Bart Van Assche's avatar
      scsi: sd_zbc: Avoid that resetting a zone fails sporadically · 7cb10a4c
      Bart Van Assche authored 
      commit ccce20fc upstream.

Since SCSI scanning occurs asynchronously, since sd_revalidate_disk() is
called from sd_probe_async() and since sd_revalidate_disk() calls
sd_zbc_read_zones() it can happen that sd_zbc_read_zones() is called
concurrently with blkdev_report_zones() and/or blkdev_reset_zones().  That can
cause these functions to fail with -EIO because sd_zbc_read_zones() e.g. sets
q->nr_zones to zero before restoring it to the actual value, even if no drive
characteristics have changed.  Avoid that this can happen by making the
following changes:

- Protect the code that updates zone information with blk_queue_enter()
  and blk_queue_exit().
- Modify sd_zbc_setup_seq_zones_bitmap() and sd_zbc_setup() such that
  these functions do not modify struct scsi_disk before all zone
  information has been obtained.

Note: since commit 055f6e18 ("block: Make q_usage_counter also track
legacy requests"; kernel v4.15) the request queue freezing mechanism also
affects legacy request queues.

Fixes: 89d94756 ("sd: Implement support for ZBC devices")
Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # v4.16
Reviewed-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7cb10a4c
    • Damien Le Moal's avatar
      scsi: sd_zbc: Fix potential memory leak · 1110636e
      Damien Le Moal authored 
      commit 4b433924 upstream.

Rework sd_zbc_check_zone_size() to avoid a memory leak due to an early
return if sd_zbc_report_zones() fails.
Reported-by: default avatarDavid.butterfield <david.butterfield@wdc.com>
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org
Reviewed-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1110636e
  3. 05 Jun, 2018 33 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7