- 29 Apr, 2019 30 commits
-
-
Bart Van Assche authored
Since qla2x00_init_timer() is not used for I/O commands there is no need to inline this function. Hence uninline this function. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
The previous patch moved all qla2x00_is_reserved_id() callers into qla_init.c. Hence also move the qla2x00_is_reserved_id() definition into qla_init.c. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since qla2x00_clear_loop_id() is not in the hot path, uninline it. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since all qla2x00_find_new_loop_id() calls occur in the same source file as the definition of this function, move that function to just before its first caller and declare it static. Convert the header above this function into kernel-doc format. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since qla2x00_set_reserved_loop_ids() only has a single caller, move it into the source file from where it is called. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since mcmd->sess->port_name is eight bytes long, use %8phC to format that port name instead of %phC. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery") # v4.11. Signed-off-by:
-
Bart Van Assche authored
Change one occurrence of "*(" into "()" and change one occurrence of "lcoate" into "locate". Fix the reference to qla_tgt_handle_cmd_for_atio(): there has never been a function with that name. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 75f8c1f6 ("[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core") # v3.5. Fixes: 2d70c103 ("[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series") # v3.5. Signed-off-by: -
Bart Van Assche authored
Hibernation hangs as follows due to commit 21e6ba3f when using SATA: Call Trace: __schedule+0x464/0xe70 schedule+0x4e/0xd0 blk_queue_enter+0x5fe/0x7e0 generic_make_request+0x313/0x950 submit_bio+0x9b/0x250 submit_bio_wait+0xc9/0x110 hib_submit_io+0x17d/0x1c0 write_page+0x61/0xa0 swap_write_page+0x4b/0x1f0 swsusp_write+0x2f9/0x3d0 hibernate.cold.10+0x108/0x231 state_store+0xf7/0x100 kobj_attr_store+0x37/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x186/0x240 __vfs_write+0x4d/0x90 vfs_write+0xfa/0x260 ksys_write+0xb9/0x1a0 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Hence revert commit 21e6ba3f. Cc: Pavel Machek <pavel@ucw.cz> Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Bart Van Assche authored
Reverts commit d16ece57 to make a clean revert of its predecessor possible. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Pedro Sousa authored
Fix RX_TERMINATION_FORCE_ENABLE define value from 0x0089 to 0x00A9 according to MIPI Alliance MPHY specification. Fixes: e785060e ("ufs: definitions for phy interface") Signed-off-by:
Pedro Sousa <sousa@synopsys.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/qedf/qedf_els.c: In function 'qedf_process_els_compl': drivers/scsi/qedf/qedf_els.c:149:20: warning: variable 'sc_cmd' set but not used [-Wunused-but-set-variable] drivers/scsi/qedf/qedf_els.c:148:28: warning: variable 'task_ctx' set but not used [-Wunused-but-set-variable] drivers/scsi/qedf/qedf_els.c: In function 'qedf_send_srr': drivers/scsi/qedf/qedf_els.c:612:6: warning: variable 'sid' set but not used [-Wunused-but-set-variable] They are never used since introduction. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
Update the driver version to 8.37.25.20. Signed-off-by:
-
Saurav Kashyap authored
Print return value of scsi_add_host on failure. Signed-off-by:
-
Saurav Kashyap authored
Log fcport for which upload failed. Signed-off-by:
-
Saurav Kashyap authored
Log the reason for start xmit failure. Signed-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
Print message on scsi_add_host failure. Signed-off-by:
-
Saurav Kashyap authored
Print the fcoe_libfc_config failure and return proper failure. Signed-off-by:
Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Saurav Kashyap authored
Comment will help in decoding the logging level. Signed-off-by:
-
Chad Dupuis authored
Port ID will help in debugging. Signed-off-by:
-
Chad Dupuis authored
Print LBA information for underrun cases. Signed-off-by:
-
Chad Dupuis authored
Printing scsi command pointer will help in crash dump analysis. Signed-off-by:
-
Chad Dupuis authored
Add debugfs node for driver stats. [mkp: typo] Signed-off-by:
-
Chad Dupuis authored
Change the message to display load failure. Signed-off-by:
-
Manish Rangankar authored
Whenever offload ramrod is issued, firmware wants driver to wait for max 5 secs, otherwise driver can initiate further corrective action. Similarly, when termination ramrod is issued, irrespective of abortive or non-abortive termination, driver should wait for 60 sec * max TCP-RT timeout. [mkp: typos] Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Manish Rangankar authored
Sometimes during connection recovery when there is a failure to resolve ARP, and offload connection was not issued, driver tries to flush pending offload connection work which was not queued up. kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0 kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11 kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018 kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0 kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1 f 84 00 00 00 00 00 0f 1f kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000 kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0 kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0 kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000 kernel: FS: 00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0 kernel: Call Trace: kernel: ? try_to_del_timer_sync+0x4d/0x80 kernel: qedi_ep_disconnect+0x3b/0x410 [qedi] kernel: ? 0xffffffffc083c000 kernel: ? klist_iter_exit+0x14/0x20 kernel: ? class_find_device+0x93/0xf0 kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi] kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi] kernel: ? copyout+0x22/0x30 kernel: ? _copy_to_iter+0xa0/0x430 kernel: ? _cond_resched+0x15/0x30 kernel: ? __kmalloc_node_track_caller+0x1f9/0x270 kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi] kernel: netlink_unicast+0x17f/0x230 kernel: netlink_sendmsg+0x2d2/0x3d0 kernel: sock_sendmsg+0x36/0x50 kernel: ___sys_sendmsg+0x280/0x2a0 kernel: ? timerqueue_add+0x54/0x80 kernel: ? enqueue_hrtimer+0x38/0x90 kernel: ? hrtimer_start_range_ns+0x19f/0x2c0 kernel: __sys_sendmsg+0x58/0xa0 kernel: do_syscall_64+0x5b/0x180 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
Varun Prakash authored
csiostor driver allocates per port num_online_cpus() irq vectors, so create per-port irq affinity mask set to spread irq vectors evenly. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Himanshu Madhani authored
ELS IOCB done message should be moved to verbose logging to prevent confusion about the error case v/s successful submission case. [mkp: typos] Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Quinn Tran authored
This patch fixes issue reported by some of the customers, who discovered that after cable pull scenario the devices disappear and path seems to remain in blocked state. Once the device reappears, driver does not seem to update path to online. This issue appears because of the defer flag creating race condition where the same session reappears. This patch fixes this issue by indicating SCSI-ML of device lost when qlt_free_session_done() is called from qlt_unreg_sess(). Fixes: 41dc529a ("qla2xxx: Improve RSCN handling in driver") Signed-off-by:
Quinn Tran <qtran@marvell.com> Cc: stable@vger.kernel.org #4.19 Signed-off-by:
-
Christoph Hellwig authored
There is no old vs new driver anymore. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 19 Apr, 2019 5 commits
-
-
Colin Ian King authored
There is a spelling mistake in a kernel message, fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/scsi/lpfc/lpfc_init.c:13091:1: warning: symbol 'lpfc_sli4_oas_verify' was not declared. Should it be static? Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Colin Ian King authored
There are a couple of spelling mistakes in some kernel info and notice messages. Fix these. Signed-off-by:
-
Colin Ian King authored
There are a couple of spelling mistakes in some kernel alert messages. Fix these. Signed-off-by:
-
Colin Ian King authored
Currently the qedf_dbg_* family of functions can overrun the end of the source string if it is less than the destination buffer length because of the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc and just use func instead as it is always a null terminated string. Addresses-Coverity: ("Out-of-bounds access") Fixes: 61d8658b ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by:
-
- 16 Apr, 2019 5 commits
-
-
Li Zhong authored
commit 84961f28 ("[SCSI] Don't add scsi_device for devices that return PQ=1, PDT=0x1f") returns SCSI_SCAN_TARGET_PRESENT if inquiry returns PQ=1, and PDT = 0x1f. However, from the scsi spec, it seemed setting PQ=1, and PDT to the type it is capable to support, can also mean the device is not connected. E.g. we see an IBM/2145 returns PQ=1 and PDT=0 for a non-mapped lun (details attached at the end). This patch changes the check condition a bit, so the check don't require PTD to be 0x1f when PQ=1. $ echo 0 0 1 > /sys/class/scsi_host/host1/scan [ 2483.722186] scsi 1:0:0:1: scsi scan: INQUIRY pass 1 length 36 [ 2483.725687] scsi 1:0:0:1: scsi scan: INQUIRY successful with code 0x0 [ 2483.729171] scsi 1:0:0:1: scsi scan: INQUIRY pass 2 length 109 [ 2483.732481] scsi 1:0:0:1: scsi scan: INQUIRY successful with code 0x0 [ 2483.735911] scsi 1:0:0:1: Direct-Access IBM 2145 0000 PQ: 1 ANSI: 6 [ 2483.741282] scsi 1:0:0:1: Attached scsi generic sg2 type 0 $ tail /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: 2145 Rev: 0000 Type: Direct-Access ANSI SCSI revision: 06 Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: 2145 Rev: 0000 Type: Direct-Access ANSI SCSI revision: 06 Host: scsi1 Channel: 00 Id: 00 Lun: 01 Vendor: IBM Model: 2145 Rev: 0000 Type: Direct-Access ANSI SCSI revision: 06 $ lsscsi [0:0:0:0] disk IBM 2145 0000 /dev/sdb [1:0:0:0] disk IBM 2145 0000 /dev/sda [1:0:0:1] disk IBM 2145 0000 - Signed-off-by:
Li Zhong <lizhongfs@gmail.com> Reviewed-by:
-
YueHaibing authored
Fix sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:4652:1: warning: symbol 'megasas_host_device_list_query' was not declared. Should it be static? Signed-off-by:
-
Stanley Chu authored
If UFS device responds an unknown request response code, we can not know what it was via logs because the code is replaced by "DID_ERROR << 16" before log printing. Fix this to provide precise request response code information for easier issue breakdown. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Varun Prakash authored
Signed-off-by:
-
Varun Prakash authored
To support vlan and bridge devices first find route using ifindex 0, if route is not found through net device associated with input scsi host then find route using ifindex of net device. Signed-off-by:
-
