- 22 Jul, 2018 40 commits
-
-
Ping-Ke Shih authored
commit 9a98302d upstream. Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.0+ Reviewed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ping-Ke Shih authored
commit 12dfa2f6 upstream. When connecting to AP, mac80211 asks driver to enter and leave PS quickly, but driver deinit doesn't wait for delayed work complete when entering PS, then driver reinit procedure and delay work are running simultaneously. This will cause unpredictable kernel oops or crash like rtl8723be: error H2C cmd because of Fw download fail!!! WARNING: CPU: 3 PID: 159 at drivers/net/wireless/realtek/rtlwifi/ rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] CPU: 3 PID: 159 Comm: kworker/3:2 Tainted: G O 4.16.13-2-ARCH #1 Hardware name: ASUSTeK COMPUTER INC. X556UF/X556UF, BIOS X556UF.406 10/21/2016 Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi] RIP: 0010:rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] RSP: 0018:ffffa6ab01e1bd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa26069071520 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff8be70e9c RDI: 00000000ffffffff RBP: 0000000000000000 R08: 0000000000000048 R09: 0000000000000348 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffa26069071520 R14: 0000000000000000 R15: ffffa2607d205f70 FS: 0000000000000000(0000) GS:ffffa26081d80000(0000) knlGS:000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000443b39d3000 CR3: 000000037700a005 CR4: 00000000003606e0 Call Trace: ? halbtc_send_bt_mp_operation.constprop.17+0xd5/0xe0 [btcoexist] ? ex_btc8723b1ant_bt_info_notify+0x3b8/0x820 [btcoexist] ? rtl_c2hcmd_launcher+0xab/0x110 [rtlwifi] ? process_one_work+0x1d1/0x3b0 ? worker_thread+0x2b/0x3d0 ? process_one_work+0x3b0/0x3b0 ? kthread+0x112/0x130 ? kthread_create_on_node+0x60/0x60 ? ret_from_fork+0x35/0x40 Code: 00 76 b4 e9 e2 fe ff ff 4c 89 ee 4c 89 e7 e8 56 22 86 ca e9 5e ... This patch ensures all delayed works done before entering PS to satisfy our expectation, so use cancel_delayed_work_sync() instead. An exception is delayed work ips_nic_off_wq because running task may be itself, so add a parameter ips_wq to deinit function to handle this case. This issue is reported and fixed in below threads: https://github.com/lwfinger/rtlwifi_new/issues/367 https://github.com/lwfinger/rtlwifi_new/issues/366 Tested-by: Evgeny Kapun <abacabadabacaba@gmail.com> # 8723DE Tested-by: Shivam Kakkar <shivam543@gmail.com> # 8723BE on 4.18-rc1 Signed-off-by:
-
Gustavo A. R. Silva authored
commit 676bcfec upstream. t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Claudio Imbrenda authored
[ Upstream commit e5ab564c ] The dst_cid and src_cid are 64 bits, therefore 64 bit accessors should be used, and in fact in virtio_transport_common.c only 64 bit accessors are used. Using 32 bit accessors for 64 bit values breaks big endian systems. This patch fixes a wrong use of le32_to_cpu in virtio_transport_send_pkt. Fixes: b9116823 ("VSOCK: add loopback to virtio_transport") Signed-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit b8f1f658 ] Sock will be NULL if we pass -1 to vhost_net_set_backend(), but when we meet errors during ubuf allocation, the code does not check for NULL before calling sockfd_put(), this will lead NULL dereferencing. Fixing by checking sock pointer before. Fixes: bab632d6 ("vhost: vhost TX zero-copy support") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Ilpo Järvinen authored
[ Upstream commit 1236f22f ] If SACK is not enabled and the first cumulative ACK after the RTO retransmission covers more than the retransmitted skb, a spurious FRTO undo will trigger (assuming FRTO is enabled for that RTO). The reason is that any non-retransmitted segment acknowledged will set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is no indication that it would have been delivered for real (the scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK case so the check for that bit won't help like it does with SACK). Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo in tcp_process_loss. We need to use more strict condition for non-SACK case and check that none of the cumulatively ACKed segments were retransmitted to prove that progress is due to original transmissions. Only then keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in non-SACK case. (FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS to better indicate its purpose but to keep this change minimal, it will be done in another patch). Besides burstiness and congestion control violations, this problem can result in RTO loop: When the loss recovery is prematurely undoed, only new data will be transmitted (if available) and the next retransmission can occur only after a new RTO which in case of multiple losses (that are not for consecutive packets) requires one RTO per loss to recover. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
Yuchung Cheng authored
[ Upstream commit c860e997 ] Fast Open key could be stored in different endian based on the CPU. Previously hosts in different endianness in a server farm using the same key config (sysctl value) would produce different cookies. This patch fixes it by always storing it as little endian to keep same API for LE hosts. Reported-by:
Daniele Iamartino <danielei@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Doron Roberts-Kedes authored
[ Upstream commit 977c7114 ] On receving an incomplete message, the existing code stores the remaining length of the cloned skb in the early_eaten field instead of incrementing the value returned by __strp_recv. This defers invocation of sock_rfree for the current skb until the next invocation of __strp_recv, which returns early_eaten if early_eaten is non-zero. This behavior causes a stall when the current message occupies the very tail end of a massive skb, and strp_peek/need_bytes indicates that the remainder of the current message has yet to arrive on the socket. The TCP receive buffer is totally full, causing the TCP window to go to zero, so the remainder of the message will never arrive. Incrementing the value returned by __strp_recv by the amount otherwise stored in early_eaten prevents stalls of this nature. Signed-off-by:
Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by:
-
Bhadram Varka authored
[ Upstream commit b6cfffa7 ] HW does not support Half-duplex mode in multi-queue scenario. Fix it by not advertising the Half-Duplex mode if multi-queue enabled. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit 0ee1f473 ] When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Aleksander Morgado authored
[ Upstream commit e7e197ed ] This module exposes two USB configurations: a QMI+AT capable setup on USB config #1 and a MBIM capable setup on USB config #2. By default the kernel will choose the MBIM capable configuration as long as the cdc_mbim driver is available. This patch adds support for the QMI port in the secondary configuration. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit bb7858ba ] Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6 ("qed: Add module with basic common support") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit cc9b27cd ] Use the correct size value while copying chassis/port id values. Fixes: 6ad8c632 ("qed: Add support for query/config dcbx.") Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 538f8d00 ] By default, driver sets the eswitch mode incorrectly as VEB (virtual Ethernet bridging). Need to set VEB eswitch mode only when sriov is enabled, and it should be to set NONE by default. The patch incorporates this change. Fixes: 0fefbfba ("qed*: Management firmware - notifications and defaults") Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 82a4e71b ] When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by:
-
David Ahern authored
[ Upstream commit 8c43bd17 ] Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups need to fail if dev_match is not true. Currently, a packet to a given port can match a socket bound to device when it should not. In the VRF case, this causes the lookup to hit a VRF socket and not a global socket resulting in a response trying to go through the VRF when it should not. Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups") Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups") Reported-by:
Lou Berger <lberger@labn.net> Diagnosed-by:
Renato Westphal <renato@opensourcerouting.org> Tested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 12b03558 ] After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Mathieu Malaterre <malat@debian.org> Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Tested-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 7e85dc8c ] When blackhole is used on top of classful qdisc like hfsc it breaks qlen and backlog counters because packets are disappear without notice. In HFSC non-zero qlen while all classes are inactive triggers warning: WARNING: ... at net/sched/sch_hfsc.c:1393 hfsc_dequeue+0xba4/0xe90 [sch_hfsc] and schedules watchdog work endlessly. This patch return __NET_XMIT_BYPASS in addition to NET_XMIT_SUCCESS, this flag tells upper layer: this packet is gone and isn't queued. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 945d015e ] We should put copy_skb in receive_queue only after a successful call to virtio_net_hdr_from_skb(). syzbot report : BUG: KASAN: use-after-free in __skb_unlink include/linux/skbuff.h:1843 [inline] BUG: KASAN: use-after-free in __skb_dequeue include/linux/skbuff.h:1863 [inline] BUG: KASAN: use-after-free in skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815 Read of size 8 at addr ffff8801b044ecc0 by task syz-executor217/4553 CPU: 0 PID: 4553 Comm: syz-executor217 Not tainted 4.18.0-rc1+ #111 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __skb_unlink include/linux/skbuff.h:1843 [inline] __skb_dequeue include/linux/skbuff.h:1863 [inline] skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815 skb_queue_purge+0x26/0x40 net/core/skbuff.c:2852 packet_set_ring+0x675/0x1da0 net/packet/af_packet.c:4331 packet_release+0x630/0xd90 net/packet/af_packet.c:2991 __sock_release+0xd7/0x260 net/socket.c:603 sock_close+0x19/0x20 net/socket.c:1186 __fput+0x35b/0x8b0 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1ec/0x2a0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1b08/0x2750 kernel/exit.c:865 do_group_exit+0x177/0x440 kernel/exit.c:968 __do_sys_exit_group kernel/exit.c:979 [inline] __se_sys_exit_group kernel/exit.c:977 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:977 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4448e9 Code: Bad RIP value. RSP: 002b:00007ffd5f777ca8 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004448e9 RDX: 00000000004448e9 RSI: 000000000000fcfb RDI: 0000000000000001 RBP: 00000000006cf018 R08: 00007ffd0000a45b R09: 0000000000000000 R10: 00007ffd5f777e48 R11: 0000000000000202 R12: 00000000004021f0 R13: 0000000000402280 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 4553: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 skb_clone+0x1f5/0x500 net/core/skbuff.c:1282 tpacket_rcv+0x28f7/0x3200 net/packet/af_packet.c:2221 deliver_skb net/core/dev.c:1925 [inline] deliver_ptype_list_skb net/core/dev.c:1940 [inline] __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009 call_write_iter include/linux/fs.h:1795 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6c6/0x9f0 fs/read_write.c:487 vfs_write+0x1f8/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4553: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582 __kfree_skb net/core/skbuff.c:642 [inline] kfree_skb+0x1a5/0x580 net/core/skbuff.c:659 tpacket_rcv+0x189e/0x3200 net/packet/af_packet.c:2385 deliver_skb net/core/dev.c:1925 [inline] deliver_ptype_list_skb net/core/dev.c:1940 [inline] __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009 call_write_iter include/linux/fs.h:1795 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6c6/0x9f0 fs/read_write.c:487 vfs_write+0x1f8/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b044ecc0 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 0 bytes inside of 232-byte region [ffff8801b044ecc0, ffff8801b044eda8) The buggy address belongs to the page: page:ffffea0006c11380 count:1 mapcount:0 mapping:ffff8801d9be96c0 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c17988 ffff8801d9bec248 ffff8801d9be96c0 raw: 0000000000000000 ffff8801b044e040 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b044eb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801b044ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff8801b044ec80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8801b044ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b044ed80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc Fixes: 58d19b19 ("packet: vnet_hdr support for tpacket_rcv") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 271f7ff5 ] When using s/w buffer management, buffers are allocated and DMA mapped. When doing so on an arm64 platform, an offset correction is applied on the DMA address, before storing it in an Rx descriptor. The issue is this DMA address is then used later in the Rx path without removing the offset correction. Thus the DMA address is wrong, which can led to various issues. This patch fixes this by removing the offset correction from the DMA address retrieved from the Rx descriptor before using it in the Rx path. Fixes: 8d5047cf ("net: mvneta: Convert to be 64 bits compatible") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Shay Agroskin authored
[ Upstream commit d14fcb8d ] The driver allocates wrong size (due to wrong struct name) when issuing a query/set request to NIC's register. Fixes: d8880795 ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by:
Shay Agroskin <shayag@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eli Cohen authored
[ Upstream commit f8119804 ] Manipulating of the MPFS requires eswitch manager capabilities. Fixes: eeb66cdb ('net/mlx5: Separate between E-Switch and MPFS') Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Alex Vesker authored
[ Upstream commit 603b7bcf ] The NULL character was not set correctly for the string containing the command length, this caused failures reading the output of the command due to a random length. The fix is to initialize the output length string. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Alex Vesker authored
[ Upstream commit d412c31d ] The command interface can work in two modes: Events and Polling. In the general case, each time we invoke a command, a work is queued to handle it. When working in events, the interrupt handler completes the command execution. On the other hand, when working in polling mode, the work itself completes it. Due to a bug in the work handler, a command could have been completed by the interrupt handler, while the work handler hasn't finished yet, causing the it to complete once again if the command interface mode was changed from Events to polling after the interrupt handler was called. mlx5_unload_one() mlx5_stop_eqs() // Destroy the EQ before cmd EQ ...cmd_work_handler() write_doorbell() --> EVENT_TYPE_CMD mlx5_cmd_comp_handler() // First free free_ent(cmd, ent->idx) complete(&ent->done) <-- mlx5_stop_eqs //cmd was complete // move to polling before destroying the last cmd EQ mlx5_cmd_use_polling() cmd->mode = POLL; --> cmd_work_handler (continues) if (cmd->mode == POLL) mlx5_cmd_comp_handler() // Double free The solution is to store the cmd->mode before writing the doorbell. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit 0efc8562 ] In smartnic env, the host (PF) driver might not be an e-switch manager, hence the FW will err on driver attempts to deal with setting/unsetting the eswitch and as a result the overall setup of sriov will fail. Fix that by avoiding the operation if e-switch management is not allowed for this driver instance. While here, move to use the correct name for the esw manager capability name. Fixes: 81848731 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support') Signed-off-by:
Guy Kushnir <guyk@mellanox.com> Reviewed-by:
Eli Cohen <eli@melloanox.com> Tested-by:
-
Or Gerlitz authored
[ Upstream commit 8ffd569a ] The check for cpu hit statistics was not returning immediate false for any non vport rep netdev and hence we crashed (say on mlx5 probed VFs) if user-space tool was calling into any possible netdev in the system. Fix that by doing a proper check before dereferencing. Fixes: 1d447a39 ('net/mlx5e: Extendable vport representor netdev private data') Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit 733d3e54 ] In smartnic env, the host (PF) driver might not be an e-switch manager, hence the switchdev mode representors are running on the embedded cpu (EC) and not at the host. As such, we should avoid dealing with vport representors if not being esw manager. While here, make sure to disallow eswitch switchdev related setups through devlink if we are not esw managers. Fixes: cb67b832 ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by:
-
Harini Katakam authored
[ Upstream commit 64d7839a ] When delta passed to gem_ptp_adjtime is negative, the sign is maintained in the ns_to_timespec64 conversion. Hence timespec_add should be used directly. timespec_sub will just subtract the negative value thus increasing the time difference. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 603d4cf8 ] Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163 ("net: Add a skb_gro_flush_final helper.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0ce4e70f ] To compute delays, better not use time of the day which can be changed by admins or malicious programs. Also change ccid3_first_li() to use s64 type for delta variable to avoid potential overflows. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 74174fe5 ] On fast hosts or malicious bots, we trigger a DCCP_BUG() which seems excessive. syzbot reported : BUG: delta (-6195) <= 0 at net/dccp/ccids/ccid3.c:628/ccid3_hc_rx_send_feedback() CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.18.0-rc1+ #112 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 ccid3_hc_rx_send_feedback net/dccp/ccids/ccid3.c:628 [inline] ccid3_hc_rx_packet_recv.cold.16+0x38/0x71 net/dccp/ccids/ccid3.c:793 ccid_hc_rx_packet_recv net/dccp/ccid.h:185 [inline] dccp_deliver_input_to_ccids+0xf0/0x280 net/dccp/input.c:180 dccp_rcv_established+0x87/0xb0 net/dccp/input.c:378 dccp_v4_do_rcv+0x153/0x180 net/dccp/ipv4.c:654 sk_backlog_rcv include/net/sock.h:914 [inline] __sk_receive_skb+0x3ba/0xd80 net/core/sock.c:517 dccp_v4_rcv+0x10f9/0x1f58 net/dccp/ipv4.c:875 ip_local_deliver_finish+0x2eb/0xda0 net/ipv4/ip_input.c:215 NF_HOOK include/linux/netfilter.h:287 [inline] ip_local_deliver+0x1e9/0x750 net/ipv4/ip_input.c:256 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x823/0x2220 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:287 [inline] ip_rcv+0xa18/0x1284 net/ipv4/ip_input.c:492 __netif_receive_skb_core+0x2488/0x3680 net/core/dev.c:4628 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 process_backlog+0x219/0x760 net/core/dev.c:5373 napi_poll net/core/dev.c:5771 [inline] net_rx_action+0x7da/0x1980 net/core/dev.c:5837 __do_softirq+0x2e8/0xb17 kernel/softirq.c:284 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit ad088ec4 ] The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. Fixes: 11393cc9 ("xdp: Add batching support to redirect map") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 30877961 ] Commit 296d4856 ("ipvlan: inherit MTU from master device") adjusted the mtu from the master device when creating a ipvlan device, but it would also override the mtu value set in rtnl_create_link. It causes IFLA_MTU param not to take effect. So this patch is to not adjust the mtu if IFLA_MTU param is set when creating a ipvlan device. Fixes: 296d4856 ("ipvlan: inherit MTU from master device") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit fc9c2029 ] The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 3ffe64f1 ] When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by:
Thomas Walker <Thomas.Walker@twosigma.com> Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e4985 ("netvsc: fix race on sub channel creation") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit ced9e191 ] pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
-
David Woodhouse authored
[ Upstream commit 9bbe60a6 ] ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on which they are to be sent. But it doesn't take ownership of those packets from the sock (if any) which originally owned them. They should remain owned by their actual sender until they've left the box. There's a hack in pskb_expand_head() to avoid adjusting skb->truesize for certain skbs, precisely to avoid messing up sk_wmem_alloc accounting. Ideally that hack would cover the ATM use case too, but it doesn't — skbs which aren't owned by any sock, for example PPP control frames, still get their truesize adjusted when the low-level ATM driver adds headroom. This has always been an issue, it seems. The truesize of a packet increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't for normal traffic, only for control frames. So I think we just got away with it, and we probably needed to send 2GiB of LCP echo frames before the misaccounting would ever have caused a problem and caused atm_may_send() to start refusing packets. Commit 14afee4b ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") did exactly what it was intended to do, and turned this mostly-theoretical problem into a real one, causing PPPoATM to fail immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* starts refusing to allow new packets. The least intrusive solution to this problem is to stash the value of skb->truesize that was accounted to the VCC, in a new member of the ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that value instead of the then-current value of skb->truesize. Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Tested-by:
Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit bc800e8b ] The __alx_open function can be called from ndo_open, which is called under RTNL, or from alx_resume, which isn't. Since commit d768319c, we're calling the netif_set_real_num_{tx,rx}_queues functions, which need to be called under RTNL. This is similar to commit 0c2cc02e ("igb: Move the calls to set the Tx and Rx queues into igb_open"). Fixes: d768319c ("alx: enable multiple tx queues") Signed-off-by:
-
Christian Lamparter authored
commit 5d59ad6e upstream. If one of the later memory allocations in rypto4xx_build_pdr() fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed. crypto4xx_build_sdr() has the same issue with dev->sdr. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Christian Lamparter authored
commit a728a196 upstream. alg entries are only added to the list, after the registration was successful. If the registration failed, it was never added to the list in the first place. Signed-off-by:
-
