- 12 Jun, 2013 1 commit
-
-
Magnus Damm authored
This is V2 of the mach-shmobile uImage load address rework patch. Rework the mach-shmobile uImage load address calculation by storing the per-board load addresses in Makefile.boot. This removes the CONFIG_MEMORY_START dependency from Makefile.boot, and it also makes it possible to create safe kernel images that boot on multiple boards. This is one of several series of code that reworks code not to rely on CONFIG_MEMORY_START/SIZE which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by:
Magnus Damm <damm@opensource.se> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
- 05 Jun, 2013 39 commits
-
-
Laurent Pinchart authored
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the code match the documentation. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Initialize r8a7790 pinmuxing and register mappings for the two debug serial ports. Signed-off-by:
-
Kuninori Morimoto authored
SCIF0 support as 1st step Acked-by:
-
Kuninori Morimoto authored
sh73a0 needs "sh_fsi2", not "sh_fsi2.0" Tested-by:
Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by:
-
Magnus Damm authored
Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by:
-
Simon Horman authored
"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. As the r8a7790 SoC hardware supports this feature enable it. Signed-off-by: -
Phil Edworthy authored
The list of functions selected by the MOD_SEL2 register was missing an entry. This caused all entries after this to modify the MOD_SEL2 register incorrectly. This bug showed up when selecting i2c2_c pins on the Renesas Hurricane board. This bug has been present since pinmux support was added for the r8a7779 SoC by 881023d2 ("sh-pfc: Add r8a7779 pinmux support") in v3.8-rc4. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
GPIOLIB dependency handling was added to the PINCTRL core by commit 2afe8229 Author: Haojian Zhuang <haojian.zhuang@linaro.org> Date: Thu Mar 28 07:34:19 2013 +0800 pinctrl: core: add dependence of GPIOLIB There is not need to handle that dependency at the SH Mobile level anymore. Revert commit 6722f6cb Author: Magnus Damm <damm@opensource.se> Date: Mon Mar 18 22:58:18 2013 +0900 ARM: shmobile: Disallow PINCTRL without GPIOLIB Modify mach-shmobile to only select PINCTRL in case of ARCH_WANT_OPTIONAL_GPIOLIB is set. This fixes a build error triggered when adding a new SoC lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n): Signed-off-by:
-
Guennadi Liakhovetski authored
This patch adds pinmux groups and functions for the two MMCIF and four SDHI interfaces on r8a73a4 (APE6). Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by:
-
Kuninori Morimoto authored
Add MMCIF CLK/CMD/DATA groups to R8A7778 PFC driver. Signed-off-by:
-
Kuninori Morimoto authored
Add HSPI CLK/CS/RX/TX pin groups to R8A7778 PFC driver. Signed-off-by:
-
Kuninori Morimoto authored
Add I2C SDA/SCL pin groups to R8A7778 PFC driver. Signed-off-by:
-
Guennadi Liakhovetski authored
Fix multiple occurrences of the "RESEVED" typo. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Guennadi Liakhovetski authored
Fix several errors in Peripheral Function Select register tables for r8a7790, which prevent various function pins from being correctly configured. Signed-off-by:
-
Kuninori Morimoto authored
IP2[31] func2 is IRQ1A, not IRQ3A Reported-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by:
-
Sergei Shtylyov authored
Add Ether RMII/LINK/MAGIC pin groups to R8A7779 PFC driver. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by:
-
Sergei Shtylyov authored
Add Ether RMII/LINK/MAGIC pin groups to R8A7778 PFC driver. Signed-off-by:
-
Vladimir Barinov authored
Add VIN DATA[0:8]/CLK/HSYNC/VSYNC pin groups to R8A7778 PFC driver. While at it, add SH_PFC_MUX8() macro for 8-bit data busses. Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> [Sergei: updated the copyrights, added SH_PFC_MUX8() macro for 8-bit data bus, made use of SH_PFC_*() macros to define the pin groups.] Signed-off-by:
-
Laurent Pinchart authored
No sh73a0 platform use the function GPIOs API. Remove it. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Sergei Shtylyov authored
Add USB0/1 PENC/USB_OVC pin groups to R8A7778 PFC driver. Signed-off-by:
-
Laurent Pinchart authored
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by:
-
Laurent Pinchart authored
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by:
-
Laurent Pinchart authored
The sh73a0 has an internal power gate on the VCCQ power supply for the SDHI0 device that is controlled (for some strange reason) by a bit in a PFC register. This feature should be exposed as a regulator. As the same register is also used for pin control purposes there is no way to achieve atomic read/write sequences with a separate regulator driver. We thus need to implement the regulator here. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
-
Laurent Pinchart authored
Add two optional init and exit SoC operations and call them from the core at probe and remove time. Signed-off-by:
-
Magnus Damm authored
Use DEFINE_RES_MEM() to save a couple of lines of code. Signed-off-by:
-
Laurent Pinchart authored
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by:
-
Laurent Pinchart authored
Move GPIOs handling from the PFC device to separate GPIO devices. Signed-off-by:
-
Kuninori Morimoto authored
This patch was tested on Bock-W board Signed-off-by:
-
Kuninori Morimoto authored
SDHI 1/2 are the target Signed-off-by:
-
Laurent Pinchart authored
Function GPIOs have been removed, remove comments that refer to them. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by:
-
Laurent Pinchart authored
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by:
-
Laurent Pinchart authored
No r8a7740 platform use the function GPIOs API. Remove it. Signed-off-by:
-
Laurent Pinchart authored
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by:
-
Laurent Pinchart authored
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by:
-
