- 19 Jun, 2023 1 commit
-
-
Aradhya Bhatia authored
The DSS controller on TI's AM625 SoC is an update from that on TI's AM65X SoC. The former has an additional OLDI TX on its first video port that helps output cloned video or WUXGA (1920x1200@60fps) resolution video output over a dual-link mode to reduce the required OLDI clock output. The second video port is same from AM65x DSS and it outputs DPI video data. It can support 2K resolutions @ 60fps, independently. Add the new controller's compatible and update descriptions. Signed-off-by:
Aradhya Bhatia <a-bhatia1@ti.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
- 17 Jun, 2023 1 commit
-
-
Sui Jingfeng authored
Otherwise its failed to pass basic compile test on platform without REGMAP_MMIO selected by defconfig make -j$(nproc) ARCH=mips CROSS_COMPILE=mips64el-linux-gnuabi64- SYNC include/config/auto.conf.cmd Checking missing-syscalls for N32 CALL scripts/checksyscalls.sh Checking missing-syscalls for O32 CALL scripts/checksyscalls.sh CALL scripts/checksyscalls.sh MODPOST Module.symvers ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/gpu/drm/ingenic/ingenic-drm.ko] undefined! make[1]: *** [scripts/Makefile.modpost:136: Module.symvers] Error 1 make: *** [Makefile:1978: modpost] Error 2 V2: Order alphabetically Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230607110650.569522-1-suijingfeng@loongson.cn
-
- 16 Jun, 2023 1 commit
-
-
Marek Vasut authored
The debug print parameters were swapped in the output and they were printed as decimal values, both the hardware address and the value. Update the debug print to print the parameters in correct order, and use hexadecimal print for both address and value. Fixes: f38b7cca ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
- 15 Jun, 2023 5 commits
-
-
Javier Martinez Canillas authored
The driver only supports OLED controllers that have a native DRM_FORMAT_C1 pixel format and that is why it has harcoded a division of the width by 8. But the driver might be extended to support devices that have a different pixel format. So it's better to use the struct drm_format_info helpers to compute the size of the buffer, used to store the pixels in native format. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230609170941.1150941-6-javierm@redhat.com
-
Javier Martinez Canillas authored
The resolutions for these panels are fixed and defined in the Device Tree, so there's no point to allocate the buffers on each plane update and that can just be done once. Let's do the allocation and free on the encoder enable and disable helpers since that's where others initialization and teardown operations are done. Signed-off-by:
-
Javier Martinez Canillas authored
The driver only supports OLED controllers that have a page height of 8 but there are devices that have different page heights. So it is better to not hardcode this value and instead have it as a per controller data value. Signed-off-by:
-
Javier Martinez Canillas authored
A default resolution in the ssd130x driver isn't set to an arbitrary 96x16 anymore. Instead is set to a width and height that's controller dependent. The datasheets for the chips describes the following display resolutions: - SH1106: 132 x 64 Dot Matrix OLED/PLED - SSD1305: 132 x 64 Dot Matrix OLED/PLED - SSD1306: 128 x 64 Dot Matrix OLED/PLED - SSD1307: 128 x 39 Dot Matrix OLED/PLED - SSD1309: 128 x 64 Dot Matrix OLED/PLED Update DT schema to reflect what the driver does and make its users aware. Signed-off-by:
-
Javier Martinez Canillas authored
Currently the driver hardcodes the default values to 96x16 pixels but this default resolution depends on the controller. The datasheets for the chips describes the following display controller resolutions: - SH1106: 132 x 64 Dot Matrix OLED/PLED - SSD1305: 132 x 64 Dot Matrix OLED/PLED - SSD1306: 128 x 64 Dot Matrix OLED/PLED - SSD1307: 128 x 39 Dot Matrix OLED/PLED - SSD1309: 128 x 64 Dot Matrix OLED/PLED Add this information to the devices' info structures, and use it set as a default if not defined in DT rather than hardcoding to an arbitrary value. Signed-off-by:
-
- 08 Jun, 2023 32 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the omap drm driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-35-u.kleine-koenig@pengutronix.de
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the rcar-du drm driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the vc4 drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the tiny drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the sun4i drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the stm drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the sti drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert rockchip drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the drm panel drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the mxsfb driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert meson drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the mcde drm driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the hisilicon drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Jessica Zhang authored
Add support for the 1080x2340 Visionox R66451 AMOLED DSI panel that comes with the Qualcomm HDK8350 display expansion pack. The panel enables display compression (DSC v1.2) by default. Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Jessica Zhang authored
Document the 1080x2340 Visionox R66451 AMOLED DSI panel bindings Reviewed-by:
-
Wang Jianzheng authored
Remove unneeded variable and directly return 0. Signed-off-by:
Wang Jianzheng <wangjianzheng@vivo.com> Acked-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Artur Weber <aweber.kernel@gmail.com> Signed-off-by:
-
Karol Wachowski authored
Whenever KMD maps region larger than 64kB that is both aligned and contiguous, set contiguous bit (52) in MMU PTE descriptor for each page in that region. This allows to treat 16 contiguous pages as one and reduce number of MMU page walks required which results in lower latency. Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Karol Wachowski authored
Simplify and unify naming convention in MMU600 page tables configuration. All DMA addresses in page tables directly accessed by VPU are called with _dma sufix and all CPU pointers to those page tables have _ptr sufix. Base pointers used to do a page walk on the CPU have corresponding names: pud_ptrs (pointers used to get access to PUD DMA) pmd_ptrs (pointers used to get access to PMD DMA) pte_ptrs (pointers used to get access to PTE DMA) with the following convention: u64 *pud_dma_ptr = pud_ptrs[pgd_idx]; *pud_dma_ptr = pud_dma; u64 *pmd_dma_ptr = pmd_ptrs[pgd_idx][pud_idx]; *pmd_dma_ptr = pmd_dma; u64 *pte_dma_ptr = pte_ptrs[pgd_idx][pud_idx][pmd_idx]; *pte_dma_ptr = pte_dma; On the way change to coherent dma allocation, _wc is only valid on ARM and was used by mistake. Signed-off-by:
-
