Instead of hiding the math in the code, define a value that sets the
fraction of allowed hot memory of ICM pool.
Set the threshold for sync of ICM hot chunks to 1/4 of the pool
instead of 1/2 of the pool. Although we will have more syncs, each
sync will be shorter and will help with insertion rate stability.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SW steering allocates/frees lots of htbl structs. Create a
separate kmem_cache and allocate htbls from this allocator.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SW steering allocates/frees lots of icm_chunk structs. To make this more
efficiently, create a separate kmem_cache and allocate these chunks from
this allocator.
By doing this we observe that the alloc/free "hiccups" frequency has
become much lower, which allows for a more steady rule insersion rate.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Instead of allocating/freeing send info objects dynamically, manage them
in pool. The number of send info objects doesn't depend on rules, so after
pre-populating the pool with an initial batch of send info objects, the
pool is not expected to grow.
This way we save alloc/free during writing STEs to ICM, which can
sometimes take up to 40msec.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Don't wait for the whole table to be ready - write each row immediately.
This way we save allocations of the ste_send_info structure and improve
performance.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Handle creation/destruction of all the domain's memory pools and other
memory-related fields in a separate init/uninit functions.
This simplifies error flow and allows cleaner addition of new pools.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Rather than cleaning the corresponding chunk's section of ste_arrays on
chunk deletion, initialize these areas upon chunk creation.

Chunk destruction tend to come in large batches (during pool syncing).
To reduce the "hiccup" in such cases, moving ste_arrays init from chunk
destruction to initialization.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

While creating rule, ste_arr is an array that is allocated at the start
of the function and freed at the end.
This memory allocation can sometimes lead to "hiccups" of up to 10ms.
However, the common use case is short chains of STEs. For such cases,
we can use a local buffer on stack instead.

Changes in v2:
  Use small local array for short rules, allocate dynamically for long rules
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Remove an argument that can be extracted in the function.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Calling fast teardown as part of the normal unloading caused
a problem with SW steering - SW steering still needs to clear
its tables, write to ICM and poll for completions.
When teardown has been done, SW steering keeps polling the CQ
forever, because nobody flushes it.

This patch fixes the issue by checking the device state in
cases where no CQE was returned.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

If sync happens when the device is in fast teardown, just bail
and don't do anything, because the PCI device is not there any more.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Otherwise resources will never be freed and refcount will not be decreased.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Instead of discovering the kmalloc bucket size _after_ allocation, round
up proactively so the allocation is explicitly made for the full size,
allowing the compiler to correctly reason about the resulting size of
the buffer through the existing __alloc_size() hint.

This will allow for kernels built with CONFIG_UBSAN_BOUNDS or the
coming dynamic bounds checking under CONFIG_FORTIFY_SOURCE to gain
back the __alloc_size() hints that were temporarily reverted in commit
93dd04ab ("slab: remove __alloc_size attribute from __kmalloc_track_caller")

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221021234713.you.031-kees@kernel.org/Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221025223811.up.360-kees@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Alex Elder says:

====================
net: ipa: don't use fixed table sizes

Currently, routing and filter tables are assumed to have a fixed
size for all platforms.  In fact, these tables can support many more
entries than what has been assumed; the only limitation is the size
of the IPA-resident memory regions that contain them.

This series rearranges things so that the size of the table is
determined from the memory region size defined in configuration
data, rather than assuming it is fixed.

This will required for IPA versions 5.0+, where the number of
entries in a routing table is larger.
====================

Link: https://lore.kernel.org/r/20221025195143.255934-1-elder@linaro.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently we assume that any filter table contains a fixed number
of entries.  Like routing tables, the number of entries in a filter
table is limited only by the size of the IPA-local memory region
used to hold the table.

Stop assuming that a filter table has exactly 14 entries.  Instead,
determine the number of entries in a routing table by dividing its
memory region size by the size of an entry.  (Note that the first
"entry" in a filter table contains an endpoint bitmap.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently all platforms are assumed allot 8 routing table entries
for use by the modem.  Instead, add a new configuration data entry
that defines the number of modem routing table entries, and record
that in the IPA structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently we assume that any routing table contains a fixed number
of entries.  The number of entries in a routing table can actually
vary, depending only on the size of the IPA-local memory region used
to hold the table.

Stop assuming that a routing table has exactly 15 entries.  Instead,
determine the number of entries in a routing table by dividing its
memory region size by the size of an entry.

The number of entries is computed early, when ipa_table_mem_valid()
is called by ipa_table_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The non-hashed routing tables for IPv4 and IPv6 will be the same
size.  And if supported, the hashed routing tables will be the same
size as the non-hashed tables.

Record the size (number of entries) of all routing tables in the IPA
structure.  For now, initialize this field using IPA_ROUTE_TABLE_MAX,
and just do so when the first route table is validated.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The git history for this driver seems to be completely
automated / tree wide changes. I can't find any boards
or systems which would use this chip. Google search
shows pictures of towel warmers and no networking products.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221025184254.1717982-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add new VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC flag, opcode
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS and add member rxdid
in struct virtchnl_rxq_info to support AVF Flex RXD
extension.

Add support to allow VF to query flexible descriptor RXDIDs supported
by DDP package and configure Rx queues with selected RXDID for IAVF.

Add code to allow VIRTCHNL_OP_GET_SUPPORTED_RXDIDS message to be
processed. Add necessary macros for registers.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Signed-off-by: Xu Ting <ting.xu@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221025161252.1952939-1-jacob.e.keller@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

RX code can be more efficient with the build_skb(). Allocating actual
SKB around eth packet buffer - right before passing it up - results in
a better cache usage.

Without RPS (echo 0 > rps_cpus) BCM4908 NAT masq performance "jumps"
between two speeds: ~900 Mbps and 940 Mbps (it's a 4 CPUs SoC). This
change bumps the lower speed from 905 Mb/s to 918 Mb/s (tested using
single stream iperf 2.0.5 traffic).

There are more optimizations to consider. One obvious to try is GRO
however as BCM4908 doesn't do hw csum is may actually lower performance.
Sometimes. Some early testing:

┌─────────────────────────────────┬─────────────────────┬────────────────────┐
│                                 │ netif_receive_skb() │ napi_gro_receive() │
├─────────────────────────────────┼─────────────────────┼────────────────────┤
│ netdev_alloc_skb()              │            905 Mb/s │           892 Mb/s │
│ napi_alloc_frag() + build_skb() │            918 Mb/s │           917 Mb/s │
└─────────────────────────────────┴─────────────────────┴────────────────────┘

Another ideas:
1. napi_build_skb()
2. skb_copy_from_linear_data() for small packets

Those need proper testing first though. That can be done later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20221025132245.22871-1-zajec5@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

During the bring-up of the Ethernet PHY, it is very useful to
see the bootstrap status information, as it can help identifying
hardware bootstrap mistakes.

Allow printing the SOR1 register, which contains the strap status
to ease the bring-up.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221025120109.779337-1-festevam@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Bond agnostically interacts with TLS device-offload requests via the
.ndo_sk_get_lower_dev operation. Return value is true iff bond
guarantees fixed mapping between the TLS connection and a lower netdev.

Due to this nature, the bond TLS device offload features are not
explicitly controllable in the bond layer. As of today, these are
read-only values based on the evaluation of bond_sk_check().  However,
this indication might be incorrect and misleading, when the feature bits
are "fixed" by some dependency features.  For example,
NETIF_F_HW_TLS_TX/RX are forcefully cleared in case the corresponding
checksum offload is disabled. But in fact the bond ability to still
offload TLS connections to the lower device is not hurt.

This means that these bits can not be trusted, and hence better become
unused.

This patch revives some old discussion [1] and proposes a much simpler
solution: Clear the bond's TLS features bits. Everyone should stop
reading them.

[1] https://lore.kernel.org/netdev/20210526095747.22446-1-tariqt@nvidia.com/Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221025105300.4718-1-tariqt@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

It doesn't need extra macros for queue 0 & 4. Same macro could
be used for all 8 queues. Related queue/channel functions could
be combined together.

Original macro which has two same parameters is unsafe macro and
might have potential side effects. Each MTL RxQ DMA channel mask
is 4 bits, so using (0xf << chan) instead of GENMASK(x + 3, x) to
avoid unsafe macro.
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Link: https://lore.kernel.org/r/20221025081747.1884926-1-junxiao.chang@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This allows the use of a matchJSON field in tests to match
against JSON output from the command under test, if that
command outputs JSON.

You specify what you want to match against as a JSON array
or object in the test's matchJSON field. You can leave out
any fields you don't want to match against that are present
in the output and they will be skipped.

An example matchJSON value would look like this:

"matchJSON": [
  {
    "Value": {
      "neighIP": {
        "family": 4,
        "addr": "AQIDBA==",
        "width": 32
      },
      "nsflags": 142,
      "ncflags": 0,
      "LLADDR": "ESIzRFVm"
    }
  }
]

The real output from the command under test might have some
extra fields that we don't care about for matching, and
since we didn't include them in our matchJSON value, those
fields will not be attempted to be matched. If everything
we included above has the same values as the real command
output, the test will pass.

The matchJSON field's type must be the same as the command
output's type, otherwise the test will fail. So if the
command outputs an array, then the value of matchJSON must
also be an array.

If matchJSON is an array, it must not contain more elements
than the command output's array, otherwise the test will
fail.
Signed-off-by: Jeremy Carter <jeremy@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20221024111603.2185410-1-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ave_open() in ave_resume() executes __phy_resume() via phy_start(), so no
need to call phy_resume() explicitly. Remove it.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221024072314.24969-1-hayashi.kunihiko@socionext.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable total_copied is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221024135046.2159523-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

state is deferenced earlier in the function, the NULL check
is pointless. Since we don't have any crash reports presumably
it's safe to assume state is not NULL.

Fixes: f392a184 ("net: phylink: provide phylink_validate_mask_caps() helper")
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20221025185126.1720553-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

My recent patch missed that mptcp_subflow_create_socket()
was creating a 'kernel' socket, then converted it to 'user' socket.

Fixes: 0cafd77d ("net: add a refcount tracker for kernel sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20221025180546.652251-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next

Re-pull from Stefan to fix the warnings.

Stefan Schmidt says:

====================
pull-request v2: ieee802154-next 2022-10-26

* tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
  net: mac802154: Fixup function parameter name in docs
====================

Link: https://lore.kernel.org/r/20221026075638.578840-1-stefan@datenfreihafen.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-next-2022-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next

Stefan Schmidt says:

====================

==
One of the biggest cycles for ieee802154 in a long time. We are landing the
first pieces of a big enhancements in managing PAN's. We might have another pull
request ready for this cycle later on, but I want to get this one out first.

Miquel Raynal added support for sending frames synchronously as a dependency
to handle MLME commands. Also introducing more filtering levels to match with
the needs of a device when scanning or operating as a pan coordinator.
To support development and testing the hwsim driver for ieee802154 was also
enhanced for the new filtering levels and to update the PIB attributes.

Alexander Aring fixed quite a few bugs spotted during reviewing changes. He
also added support for TRAC in the atusb driver to have better failure
handling if the firmware provides the needed information.

Jilin Yuan fixed a comment with a repeated word in it.
==================
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
this is a pull request of 29 patches for net-next/master.

The first patch is by Daniel S. Trevitz and adds documentation for
switchable termination resistors.

Zhang Changzhong's patch fixes a debug output in the j13939 stack.

Oliver Hartkopp finally removes the pch_can driver, which is
superseded by the generic c_can driver.

Gustavo A. R. Silva replaces a zero-length array with
DECLARE_FLEX_ARRAY() in the ucan driver.

Kees Cook's patch removes a no longer needed silencing of
"-Warray-bounds" warnings for the kvaser_usb driver.

The next 2 patches target the m_can driver. The first is by me cleans
up the LEC error handling, the second is by Vivek Yadav and extends
the LEC error handling to the data phase of CAN-FD frames.

The next 9 patches all target the gs_usb driver. The first 5 patches
are by me and improve the Kconfig prompt and help text, set
netdev->dev_id to distinguish multi CAN channel devices, allow
loopback and listen only at the same time, and clean up the
gs_can_open() function a bit. The remaining 4 patches are by Jeroen
Hofstee and add support for 2 new features: Bus Error Reporting and
Get State.

Jimmy Assarsson and Anssi Hannula contribute 10 patches for the
kvaser_usb driver. They first add Listen Only and Bus Error Reporting
support, handle CMD_ERROR_EVENT errors, improve CAN state handling,
restart events, and configuration of the bit timing parameters.

Another patch by me which fixes the indention in the m_can driver.

A patch by Dongliang Mu cleans up the ucan_disconnect() function in
the ucan driver.

The last patch by Biju Das is for the rcan_canfd driver and cleans up
the reset handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace devm_reset_control_get_exclusive->devm_reset_control_
get_optional_exclusive so that we can avoid unnecessary
SoC specific check in probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20221025155657.1426948-4-biju.das.jz@bp.renesas.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

From API pairing, change unregister_netdev() to unregister_candev()
since the registration function is register_candev(). Actually, they
are the same.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024110033.727542-1-dzm91@hust.edu.cn
[mkl: adjust subject + commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The driver uses indent-with-tab for defines. Replace spaces after
IR_ERR_BUS_31X with tab for consistent indention.

Link: https://lore.kernel.org/all/20221024185544.68240-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Jimmy Assarsson <extja@kvaser.com> says:

Split v4 series, since it got rejected [1]. This part only contains
non-critical fixes and improvements.

Note: This series depend on changes in [2].

Changes in v5:
 - Split v4 series, since it got rejected [1].
   This part only contains non-critical fixes and improvements.

Changes in v4: https://lore.kernel.org/all/20220903182344.139-1-extja@kvaser.com
 - Add Tested-by: Anssi Hannula to
   [PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
 - Update commit message in
   [PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device

Changes in v3: https://lore.kernel.org/all/20220901122729.271-1-extja@kvaser.com
 - Rebase on top of commit
   1d5eeda2 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
 - Add Tested-by: Anssi Hannula
 - Add stable@vger.kernel.org to CC.
 - Add my S-o-b to all patches
 - Fix regression introduced in
   [PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
   found by Anssi Hannula
   https://lore.kernel.org/all/b25bc059-d776-146d-0b3c-41aecf4bd9f8@bitwise.fi

v2: https://lore.kernel.org/all/20220708115709.232815-1-extja@kvaser.com

v1: https://lore.kernel.org/all/20220516134748.3724796-1-anssi.hannula@bitwise.fi

[1] https://lore.kernel.org/all/20220920122246.00dbe946@kernel.org
[2] https://lore.kernel.org/all/20221010150829.199676-1-extja@kvaser.com

Link: https://lore.kernel.org/all/20221010185237.319219-1-extja@kvaser.com
[mkl: move "1/1 can: kvaser_usb: Fix possible completions during init_completion" to linux-can tree]
[mkl: improve change log, update links]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming

The device will respond with a CMD_ERROR_EVENT command, with error_code
KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ
contains invalid bittiming parameters.
However, this command does not contain any channel reference.

To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare
the requested bittiming parameters with the device reported parameters.

Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add struct kvaser_usb_busparams containing the busparameters used in
CMD_{SET,GET}_BUSPARAMS* commands.
Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-11-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

When auto-restart is enabled, the kvaser_usb_leaf driver considers
transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery
event (restart).

However, these events may occur at interface startup time before
kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing
restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no
actual restart having occurred.

Fix that by making the auto-restart condition checks more strict so that
they only trigger when the interface was actually in the BUS_OFF state.

Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

With 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 it was observed
that if the device was bus-off when stopped, at next start (either via
interface down/up or manual bus-off restart) the initial
CMD_CHIP_STATE_EVENT received just after CMD_START_CHIP_REPLY will have
the M16C_STATE_BUS_OFF bit still set, causing the interface to
immediately go bus-off again.

The bit seems to internally clear quickly afterwards but we do not get
another CMD_CHIP_STATE_EVENT.

Fix the issue by ignoring any initial bus-off state until we see at
least one bus-on state. Also, poll the state periodically until that
occurs.

It is possible we lose one actual immediately occurring bus-off event
here in which case the HW will auto-recover and we see the recovery
event. We will then catch the next bus-off event, if any.

This issue did not reproduce with 0bfd:0017 Kvaser Memorator
Professional HS/HS FW 2.0.50.

Fixes: 71873a9b ("can: kvaser_usb: Add support for more Kvaser Leaf v2 devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-9-extja@kvaser.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>